FHEM/mod-AutoShuttersControl
1
0
Fork 0
Code Issues 12 Pull Requests Releases 9 Wiki Activity

add text to english commandref

Browse Source
This commit is contained in:
Marko Oldenburg 2019-06-06 08:03:29 +02:00
parent ae695b27e4
commit 60c63d698d
2 changed files with 203 additions and 163 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

360
73_AutoShuttersControl.pm
View File

@ -5179,29 +5179,35 @@ sub getblockAscDrivesAfterManual {
<a name="AutoShuttersControlDefine"></a>
<strong>Define</strong>
<ul>
<code>define &lt;name&gt; AutoShuttersControl</code>
<br/><br/>
<p>
<code>define &lt;name&gt; AutoShuttersControl</code>
</p>
Usage:
<ul>
<br/>
<code>define myASControl AutoShuttersControl</code><br/>
</ul>
<br/>
This creates an new AutoShuttersControl device, called <em>myASControl</em>.<br/>
Now was the new global attribute <var>ASC</var> added to the <abbr>FHEM</abbr> installation.
Each shutter that is to be controlled by AutoShuttersControl must now have the attribute ASC set to 1 or 2.
The value 1 is to be used with devices whose state is given as position (i.e. ROLLO or Siro, shutters
openend is 0, shutters closed is 100), 2 with devices whose state is given as percent closed (i.e. HomeMatic,
shutters opened is 100, closed is 0).<br/>
After setting the attributes to all devices who should be controlled, the automatic scan at the main device
can be started for example with <br/>
<code>set myASControl scanForShutters</code>
<p>
<ul>
<code>define myASControl AutoShuttersControl</code><br/>
</ul>
</p>
<p>
This creates an new AutoShuttersControl device, called <em>myASControl</em>.<br/>
Now was the new global attribute <var>ASC</var> added to the <abbr>FHEM</abbr> installation.
Each shutter that is to be controlled by AutoShuttersControl must now have the attribute ASC set to 1 or 2.
The value 1 is to be used with devices whose state is given as position (i.e. ROLLO or Siro, shutters
openend is 0, shutters closed is 100), 2 with devices whose state is given as percent closed (i.e. HomeMatic,
shutters opened is 100, closed is 0).
</p>
<p>
After setting the attributes to all devices who should be controlled, the automatic scan at the main device
can be started for example with <br/>
<code>set myASControl scanForShutters</code>
</p>
</ul>
<br/>
<a name="AutoShuttersControlReadings"></a>
<strong>Readings</strong>
<ul>
<u>Within the ASC device:</u>
<p>Within the ASC device:</p>
<ul>
<li><strong>..._nextAstroTimeEvent</strong> - Next astro event: sunrise, sunset or fixed time</li>
<li><strong>..._PosValue</strong> - current position</li>
@ -5209,25 +5215,25 @@ sub getblockAscDrivesAfterManual {
<li><strong>..._lastDelayPosValue</strong> - last specified order, will be executed with the next matching
event
</li>
<li><strong>partyMode - on/off</strong> - is working mode set to part?y</li>
<li><strong>ascEnable - on/off</strong> - are the associated shutters control by ASC completely?</li>
<li><strong>controlShading - on/off</strong> - are the associated shutters controlled for shading by ASC?
<li><strong>partyMode on|off</strong> - is working mode set to part?y</li>
<li><strong>ascEnable on|off</strong> - are the associated shutters control by ASC completely?</li>
<li><strong>controlShading on|off</strong> - are the associated shutters controlled for shading by ASC?
</li>
<li><strong>hardLockOut - on/off</strong> - switch for preventing a global hard lock out</li>
<li><strong>hardLockOut on|off</strong> - switch for preventing a global hard lock out</li>
<li><strong>room_...</strong> - list of every found shutter for every room: room_Sleeping: Patio</li>
<li><strong>selfDefense</strong> - state of the self defense mode</li>
<li><strong>state</strong> - state of the ASC device: active, enabled, disabled or other state information
</li>
<li><strong>sunriseTimeWeHoliday - on/off</strong> - state of the weekend and holiday support</li>
<li><strong>sunriseTimeWeHoliday on|off</strong> - state of the weekend and holiday support</li>
<li><strong>userAttrList</strong> - ASC sets some user defined attributes (<abbr><em>userattr</em></abbr>)
for the shutter devices. This readings shows the current state of the given user attributes to the
shutter devices.
</li>
</ul>
<br/>
<u>Within the shutter devices:</u>
<p>Within the shutter devices:</p>
<ul>
<li><strong>ASC_Enable - on/off</strong> - shutter is controlled by ASC or not</li>
<li><strong>ASC_Enable on|off</strong> - shutter is controlled by ASC or not</li>
<li><strong>ASC_Time_DriveUp</strong> - if the astro mode is used, the next sunrise is shown.
If the brightness or time mode is used, the value from <em>ASC_Time_Up_Late</em> is shown.
</li>
@ -5242,17 +5248,17 @@ sub getblockAscDrivesAfterManual {
<a name="AutoShuttersControlSet"></a>
<strong>Set</strong>
<ul>
<li><strong>ascEnable - on/off</strong> - enable or disable the global control by ASC</li>
<li><strong>controlShading - on/off</strong> - enable or disable the global shading control by ASC</li>
<li><strong>ascEnable on|off</strong> - enable or disable the global control by ASC</li>
<li><strong>controlShading on|off</strong> - enable or disable the global shading control by ASC</li>
<li><strong>createNewNotifyDev</strong> - re-creates the internal structure for NOTIFYDEV. Is only present if
the
<em>ASC_Expert</em> attribute is set to 1.
</li>
<li><strong>hardLockOut - on/off</strong> - controls the global hard lock out protection for shutters, whose
<li><strong>hardLockOut on|off</strong> - controls the global hard lock out protection for shutters, whose
<em>ASC_LockOut</em>
attribute is set accordingly. See the attributes section below.
</li>
<li><strong>partyMode - on/off</strong> - controls the global party mode for shutters. Every shutters whose
<li><strong>partyMode on|off</strong> - controls the global party mode for shutters. Every shutters whose
<em>ASC_Partymode</em> attribute is set to <em>on</em>, is not longer controlled by ASC. The last saved
working command send to the device, i.e. by a event, created by a window or presence event, will be executed
once the party mode is disabled.
@ -5263,14 +5269,14 @@ sub getblockAscDrivesAfterManual {
<li><strong>scanForShutters</strong> - scans the whole FHEM installation for (new) devices whose <em>ASC</em>
attribute is set (to 1 or 2, see above).
</li>
<li><strong>selfDefense - on/off</strong> - controls the self defense function. This function listens for
<li><strong>selfDefense on|off</strong> - controls the self defense function. This function listens for
example on a residents device. If this device is set to <em>absent</em> and a window is still open, ASC will close
the shutter for a rudimentary burglary protection.
</li>
<li><strong>shutterASCenableToggle - on/off</strong> - controls if the ASC controls are shown at a associated
<li><strong>shutterASCenableToggle on|off</strong> - controls if the ASC controls are shown at a associated
shutter device.
</li>
<li><strong>sunriseTimeWeHoliday - on/off</strong> - controls the weekend and holiday support. If enabled, the
<li><strong>sunriseTimeWeHoliday on|off</strong> - controls the weekend and holiday support. If enabled, the
<em>ASC_Time_Up_WE_Holiday</em> attribute is considered.
</li>
<li><strong>wiggle</strong> - wiggles a device for a given value (default 5%, controlled by
@ -5293,7 +5299,8 @@ sub getblockAscDrivesAfterManual {
<a name="AutoShuttersControlAttributes"></a>
<strong>Attributes</strong>
<ul>
<u>Im ASC-Device</u>
<p>At the global <abbr>ASC</abbr> device:</p>
<ul>
<a name="ASC_autoAstroModeEvening"></a>
<li><strong>ASC_autoAstroModeEvening</strong> - REAL, CIVIL, NAUTIC, ASTRONOMIC or HORIZON</li>
@ -5346,7 +5353,7 @@ sub getblockAscDrivesAfterManual {
prevents the shutter to be operated by <abbr>ASC</abbr>. Last operating order will be kept.
</li>
<a name="ASC_rainSensor"></a>
<li><strong>ASC_rainSensor - DEVICENAME[:READINGNAME] MAXTRIGGER[:HYSTERESE] [CLOSEDPOS]</strong> - Contains
<li><strong>ASC_rainSensor DEVICENAME[:READINGNAME] MAXTRIGGER[:HYSTERESE] [CLOSEDPOS]</strong> - Contains
settings for the rain protection. <em>DEVICNAME</em> specifies a rain sensor, the optional
<em>READINGNAME</em> the name of the reading at the <em>DEVICENAME</em>. The <em>READINGNAME</em>
should contain the values <em>rain</em> and <em>dry</em> or a numeral rain amount. <em>MAXTRIGGER</em>
@ -5354,7 +5361,7 @@ sub getblockAscDrivesAfterManual {
the threshold is reached. <em>HYSTERESE</em> sets a hysteresis for <em>MAXTRIGGER</em>.
</li>
<a name="ASC_residentsDev"></a>
<li><strong>ASC_residentsDev - DEVICENAME[:READINGNAME]</strong> - <em>DEVICENAME</em> points to a device
<li><strong>ASC_residentsDev DEVICENAME[:READINGNAME]</strong> - <em>DEVICENAME</em> points to a device
for presence, e.g. of type <em>RESIDENTS</em>. <em>READINGNAME</em> points to a reading at
<em>DEVICENAME</em> which contains a presence state, e.g. <em>rgr_Residents:presence</em>. The target
should contain values alike the <em>RESIDENTS</em> family.
@ -5364,7 +5371,7 @@ sub getblockAscDrivesAfterManual {
the operating time. <em>0</em> equals to no delay.
</li>
<a name="ASC_tempSensor"></a>
<li><strong>ASC_tempSensor - DEVICENAME[:READINGNAME]</strong> - <em>DEVICENAME</em> points to a device
<li><strong>ASC_tempSensor DEVICENAME[:READINGNAME]</strong> - <em>DEVICENAME</em> points to a device
with a temperature, <em>READINGNAME</em> to a reading located at the <em>DEVICENAME</em>, for example
<em>OUTDOOR_TEMP:measured-temp</em>. <em>READINGNAME</em> defaults to <em>temperature</em>.
</li>
@ -5373,7 +5380,7 @@ sub getblockAscDrivesAfterManual {
the sun position. Supports currently devices of type <em>Twilight</em> or <em>Astro</em>.
</li>
<a name="ASC_windSensor"></a>
<li><strong>ASC_windSensor - DEVICENAME[:READINGNAME]</strong> - <em>DEVICENAME</em> points to a device
<li><strong>ASC_windSensor DEVICENAME[:READINGNAME]</strong> - <em>DEVICENAME</em> points to a device
containing a wind speed. Reads from the <em>wind</em> reading, if not otherwise specified by
<em>READINGNAME</em>.
</li>
@ -5401,8 +5408,8 @@ sub getblockAscDrivesAfterManual {
<a name="ASC_brightnessMaxVal"></a>
<li><del>ASC_brightnessMaxVal</del> - <em>Warning! Deprecated! Don't use anymore!</em></li>
</ul>
<br/>
<u>At shutter devices, controlled by <abbr>ASC</abbr></u>
<p>At shutter devices, controlled by <abbr>ASC</abbr>:</p>
<ul>
<li><strong>ASC - 0/1/2</strong>
<ul>
@ -5450,13 +5457,13 @@ sub getblockAscDrivesAfterManual {
<em>EVENING-VALUE</em>. Gets the brightness from <em>DEVICE</em>, reads by default from the
<em>brightness</em> reading, unless <em>READING</em> is specified. Defaults to <em>none</em>.
</li>
<li><strong>ASC_Closed_Pos</strong> - A value from 0 to 100 in increments of 10. Depends on the <em>ASC</em>
attribute.
<li><strong>ASC_Closed_Pos</strong> - The closed position value from 0 to 100 percent in increments of 10.
Depends on the <em>ASC</em> attribute.
</li>
<li><strong>ASC_ComfortOpen_Pos</strong> - A value from 0 to 100 in increments of 10. Default: depends on the
<em>ASC</em> attribute.
<li><strong>ASC_ComfortOpen_Pos</strong> - The comfort opening position, ranging
from 0 to 100 percent in increments of 10. Default: depends on the <em>ASC</em> attribute.
</li>
<li><strong>ASC_Down - [astro|time|brightness]</strong> - Drive the shutter depending on this setting:
<li><strong>ASC_Down - astro|time|brightness</strong> - Drive the shutter depending on this setting:
<ul>
<li>astro - drive down at sunset</li>
<li>time - drive at <em>ASC_Time_Down_Early</em></li>
@ -5474,7 +5481,7 @@ sub getblockAscDrivesAfterManual {
<li><strong>ASC_Drive_OffsetStart</strong> - <strong>Fixed</strong> drive delay in seconds for calculating the
driving time. -1 or 0 equals to no delay. Defaults to -1 (no offset).
</li>
<li><strong>ASC_LockOut [soft|hard|off]</strong> - Configures the lock out protection for the current
<li><strong>ASC_LockOut soft|hard|off</strong> - Configures the lock out protection for the current
shutter. Values are:
<ul>
<li>soft - works if the global lock out protection <em>lockOut soft</em> is set and a sensor
@ -5489,145 +5496,182 @@ sub getblockAscDrivesAfterManual {
</li>
</ul>
</li>
<li><strong>ASC_LockOut_Cmd [inhibit|blocked|protection]</strong> -
set Befehl f&uuml;r das Rollladen-Device
zum Hardware sperren. Dieser Befehl wird gesetzt werden, wenn man "ASC_LockOut" auf hard setzt (default:
none)
<li><strong>ASC_LockOut_Cmd inhibit|blocked|protection</strong> - Configures the lock out command for
<em>ASC_LockOut</em> if hard is chosen as a value. Defaults to none.
</li>
<li><strong>ASC_Mode_Down - always/home/absent/off</strong> - Wann darf die Automatik steuern. immer,
niemals, bei Abwesenheit des Roommate (ist kein Roommate und absent eingestellt, wird gar nicht
gesteuert) (default: always)
<li><strong>ASC_Mode_Down always|home|absent|off</strong> - When will a shutter be driven down:
<ul>
<li>always - <abbr>ASC</abbr> will drive always. Default value.</li>
<li>off - don't drive</li>
<li>home / absent - considers a residents status set by <em>ASC_residentsDev</em>. If no
resident is configured and this attribute is set to absent, <abbr>ASC</abbr> will not
operate the shutter.</li>
</ul>
</li>
<li><strong>ASC_Mode_Up - always/home/absent/off</strong> - Wann darf die Automatik steuern. immer, niemals,
bei Abwesenheit des Roommate (ist kein Roommate und absent eingestellt, wird gar nicht gesteuert)
(default: always)
<li><strong>ASC_Mode_Up always|home|absent|off</strong> - When will a shutter be driven up:
<ul>
<li>always - <abbr>ASC</abbr> will drive always. Default value.</li>
<li>off - don't drive</li>
<li>home / absent - considers a residents status set by <em>ASC_residentsDev</em>. If no
resident is configured and this attribute is set to absent, <abbr>ASC</abbr> will not
operate the shutter.</li>
</ul>
</li>
<li><strong>ASC_Open_Pos</strong> - in 10 Schritten von 0 bis 100 (default: ist abh&auml;ngig vom Attribut
<em>ASC</em>)
<li><strong>ASC_Open_Pos</strong> - The opening position value from 0 to 100 percent in increments of 10.
Depends on the <em>ASC</em> attribute.
</li>
<li><strong>ASC_Partymode - on/off</strong> - schaltet den Partymodus an oder aus. Wird am ASC Device set
ASC-DEVICE partyMode on geschalten, werden alle Fahrbefehle an den Rolll&auml;den, welche das Attribut
auf on haben, zwischengespeichert und sp&auml;ter erst ausgef&uuml;hrt (default: off)
<li><strong>ASC_Partymode on|off</strong> - Party mode. If configured to on, driving orders for the
shutter by <abbr>ASC</abbr> will be queued if <em>partyMode</em> is set to <em>on</em> at the
global <abbr>ASC</abbr> device. Will execute the driving orders after <em>partyMode</em> is disabled.
Defaults to off.
</li>
<li><strong>ASC_Pos_Reading</strong> - Name des Readings, welches die Position des Rollladen in Prozent an
gibt; wird bei unbekannten Device Typen auch als set Befehl zum fahren verwendet
<li><strong>ASC_Pos_Reading</strong> - Points to the reading name, which contains the current
position for the shutter in percent. Will be used for <em>set</em> at devices of unknown kind.
</li>
<li><strong>ASC_PrivacyDownTime_beforNightClose</strong> - wie viele Sekunden vor dem abendlichen schlie&szlig;en
soll der Rollladen in die Sichtschutzposition fahren, -1 bedeutet das diese Funktion unbeachtet bleiben
soll (default: -1)
<li><strong>ASC_PrivacyDownTime_beforNightClose</strong> - How many seconds is the privacy mode activated
before the shutter is closed in the evening. A value of <em>-1</em> disables this. -1 is the default
value.
</li>
<li><strong>ASC_PrivacyDown_Pos</strong> - Position den Rollladens f&uuml;r den Sichtschutz (default: 50)
<li><strong>ASC_PrivacyDown_Pos</strong> -
Position in percent for privacy mode, defaults to 50.
</li>
<li><strong>ASC_WindProtection - on/off</strong> - soll der Rollladen beim Regenschutz beachtet werden.
On=JA, off=NEIN.
<li><strong>ASC_WindProtection on|off</strong> - Shutter is protected by the wind protection. Defaults
to off.
</li>
<li><strong>ASC_Roommate_Device</strong> - mit Komma getrennte Namen des/der Roommate Device/s, welche
den/die Bewohner des Raumes vom Rollladen wiedergibt. Es macht nur Sinn in Schlaf- oder Kinderzimmern
(default: none)
<li><strong>ASC_Roommate_Device</strong> - Comma separated list of <em>ROOMMATE</em> devices, representing
the inhabitants of the room to which the shutter belongs. Especially useful for bedrooms. Defaults
to none.
</li>
<li><strong>ASC_Roommate_Reading</strong> - das Reading zum Roommate Device, welches den Status wieder gibt
(default: state)
<li><strong>ASC_Roommate_Reading</strong> - Specifies a reading name to <em>ASC_Roommate_Device</em>.
Defaults to <em>state</em>.
</li>
<li><strong>SC_Self_Defense_Exclude - on/off</strong> - bei on Wert wird dieser Rollladen bei aktiven Self
Defense und offenen Fenster nicht runter gefahren, wenn Residents absent ist. (default: off)
<li><strong>ASC_Self_Defense_Exclude on|off</strong> - If set to on, the shutter will not be closed
if the self defense mode is activated and residents are absent. Defaults to off.
</li>
</p>
<ul>
<strong><u>Beschreibung der Beschattungsfunktion</u></strong>
</br>Damit die Beschattung Funktion hat, m&uuml;ssen folgende Anforderungen erf&uuml;llt sein.
</br><strong>Im ASC Device</strong> das Attribut "ASC_autoShuttersControlShading" mit dem Wert on, sowie
ein Astro/Twilight Device im Attribut "ASC_twilightDevice" und das Attribut "ASC_tempSensor".
</br><strong>In den Rollladendevices</strong> ben&ouml;tigt ihr ein Helligkeitssensor als Attribut
"ASC_BrightnessSensor", sofern noch nicht vorhanden. Findet der Sensor nur f&uuml;r die Beschattung
Verwendung ist der Wert DEVICENAME[:READING] ausreichend.
</br>Alle weiteren Attribute sind optional und wenn nicht gesetzt mit Default-Werten belegt. Ihr solltet
sie dennoch einmal anschauen und entsprechend Euren Gegebenheiten setzen. Die Werte f&uumlr; die
Fensterposition und den Vor- Nachlaufwinkel sowie die Grenzwerte f&uuml;r die StateChange_Cloudy und
StateChange_Sunny solltet ihr besondere Beachtung dabei schenken.
<li><strong>ASC_Shading_Angle_Left</strong> - Vorlaufwinkel im Bezug zum Fenster, ab wann abgeschattet
wird. Beispiel: Fenster 180° - 85° ==> ab Sonnenpos. 95° wird abgeschattet (default: 75)
</li>
<li><strong>ASC_Shading_Angle_Right</strong> - Nachlaufwinkel im Bezug zum Fenster, bis wann
abgeschattet wird. Beispiel: Fenster 180° + 85° ==> bis Sonnenpos. 265° wird abgeschattet (default:
75)
</li>
<li><strong>ASC_Shading_Direction</strong> - Position in Grad, auf der das Fenster liegt - genau Osten w&auml;re
90, S&uuml;den 180 und Westen 270 (default: 180)
</li>
<li><strong>ASC_Shading_Min_Elevation</strong> - ab welcher H&ouml;he des Sonnenstandes soll beschattet
werden, immer in Abh&auml;ngigkeit der anderen einbezogenen Sensorwerte (default: 25.0)
</li>
<li><strong>ASC_Shading_Min_OutsideTemperature</strong> - ab welcher Temperatur soll Beschattet werden,
immer in Abh&auml;ngigkeit der anderen einbezogenen Sensorwerte (default: 18)
</li>
<li><strong>ASC_Shading_Mode - absent,always,off,home</strong> / wann soll die Beschattung nur
stattfinden. (default: off)
</li>
<li><strong>ASC_Shading_Pos</strong> - Position des Rollladens f&uuml;r die Beschattung</li>
<li><strong>ASC_Shading_StateChange_Cloudy</strong> - Brightness Wert ab welchen die Beschattung
aufgehoben werden soll, immer in Abh&auml;ngigkeit der anderen einbezogenen Sensorwerte (default:
20000)
</li>
<li><strong>ASC_Shading_StateChange_Sunny</strong> - Brightness Wert ab welchen Beschattung stattfinden
soll, immer in Abh&auml;ngigkeit der anderen einbezogenen Sensorwerte (default: 35000)
</li>
<li><strong>ASC_Shading_WaitingPeriod</strong> - wie viele Sekunden soll gewartet werden bevor eine
weitere Auswertung der Sensordaten f&uuml;r die Beschattung stattfinden soll (default: 1200)
</li>
</ul>
<li><strong>ASC_ShuttersPlace - window/terrace</strong> - Wenn dieses Attribut auf terrace gesetzt ist, das
Residence Device in den Status "gone" geht und SelfDefense aktiv ist (ohne das das Reading selfDefense
gesetzt sein muss), wird das Rollo geschlossen (default: window)
<li><strong>ASC_ShuttersPlace window|terrace</strong> - If set to <em>terrace</em>, and the
residents device is set to <em>gone</em>, and <em>selfDefense</em> is activated, the shutter will
be closed. If set to window, will not. Defaults to window.
</li>
<li><strong>ASC_Time_Down_Early</strong> - Sonnenuntergang fr&uuml;hste Zeit zum Runterfahren (default:
16:00)
<li><strong>ASC_Time_Down_Early</strong> - Will not drive before time is <em>ASC_Time_Down_Early</em>
or later, even the sunset occurs earlier. To be set in military time. Defaults to 16:00.
</li>
<li><strong>ASC_Time_Down_Late</strong> - Sonnenuntergang sp&auml;teste Zeit zum Runterfahren (default:
22:00)
<li><strong>ASC_Time_Down_Late</strong> - Will not drive after time is <em>ASC_Time_Down_Late</em>
or earlier, even the sunset occurs later. To be set in military time. Defaults to 22:00.
</li>
<li><strong>ASC_Time_Up_Early</strong> - Sonnenaufgang fr&uuml;hste Zeit zum Hochfahren (default: 05:00)
<li><strong>ASC_Time_Up_Early</strong> - Will not drive before time is <em>ASC_Time_Up_Early</em>
or earlier, even the sunrise occurs earlier. To be set in military time. Defaults to 05:00.
</li>
<li><strong>ASC_Time_Up_Late</strong> - Sonnenaufgang sp&auml;teste Zeit zum Hochfahren (default: 08:30)
<li><strong>ASC_Time_Up_Late</strong> - Will not drive after time is <em>ASC_Time_Up_Late</em>
or earlier, even the sunrise occurs later. To be set in military time. Defaults to 08:30.
</li>
<li><strong>ASC_Time_Up_WE_Holiday</strong> - Sonnenaufgang fr&uuml;hste Zeit zum Hochfahren am Wochenende
und/oder Urlaub (holiday2we wird beachtet). (default: 08:00) ACHTUNG!!! in Verbindung mit Brightness f&uuml;r
<em>ASC_Up</em> muss die Uhrzeit kleiner sein wie die Uhrzeit aus <em>ASC_Time_Up_Late</em></li>
<li><strong>ASC_Up - astro/time/brightness</strong> - bei astro wird Sonnenaufgang berechnet, bei time wird
der Wert aus ASC_Time_Up_Early als Fahrzeit verwendet und bei brightness muss ASC_Time_Up_Early und
ASC_Time_Up_Late korrekt gesetzt werden. Der Timer l&auml;uft dann nach ASC_Time_Up_Late Zeit, es wird
aber in der Zeit zwischen ASC_Time_Up_Early und ASC_Time_Up_Late geschaut, ob die als Attribut im
Moduldevice hinterlegte ASC_brightnessMinVal erreicht wurde. Wenn ja, wird der Rollladen hoch gefahren
(default: astro)
<li><strong>ASC_Time_Up_WE_Holiday</strong> - Will not drive before time is <em>ASC_Time_Up_WE_Holiday</em>
on weekends and holidays (<em>holiday2we</em> is considered). Defaults to 08:00. <strong>Warning!</strong>
If <em>ASC_Up</em> set to <em>brightness</em>, the time for <em>ASC_Time_Up_WE_Holiday</em>
must be earlier then <em>ASC_Time_Up_Late</em>.
</li>
<li><strong>ASC_Ventilate_Pos</strong> - in 10 Schritten von 0 bis 100 (default: ist abh&auml;ngig vom
Attribut <em>ASC</em>)
<li><strong>ASC_Up astro|time|brightness</strong> - Drive the shutter depending on this setting:
<ul>
<li>astro - drive up at sunrise</li>
<li>time - drive at <em>ASC_Time_Up_Early</em></li>
<li>brightness - drive between <em>ASC_Time_Up_Early</em> and <em>ASC_Time_Up_Late</em>,
depending on the settings of <em>ASC_BrightnessSensor</em> (see above).</li>
</ul>
Defaults to <em>astro</em>.
</li>
<li><strong>ASC_Ventilate_Window_Open</strong> - auf l&uuml;ften, wenn das Fenster gekippt/ge&ouml;ffnet
wird und aktuelle Position unterhalb der L&uuml;ften-Position ist (default: on)
<li><strong>ASC_Ventilate_Pos</strong> - The opening position value for ventilation
from 0 to 100 percent in increments of 10. Default depending on the <em>ASC</em> attribute.
</li>
<li><strong>ASC_WiggleValue</strong> - Wert um welchen sich die Position des Rollladens &auml;ndern soll
(default: 5)
<li><strong>ASC_Ventilate_Window_Open on|off</strong> - Drive to ventilation position as window is opened
or tilted, even when the current shutter position is lower than the <em>ASC_Ventilate_Pos</em>.
Defaults to on.
</li>
<li><strong>ASC_WindParameters - TRIGGERMAX[:HYSTERESE] [DRIVEPOSITION]</strong> / Angabe von Max Wert ab
dem f&uuml;r Wind getriggert werden soll, Hytsrese Wert ab dem der Windschutz aufgehoben werden soll
TRIGGERMAX - HYSTERESE / Ist es bei einigen Rolll&auml;den nicht gew&uuml;nscht das gefahren werden
soll, so ist der TRIGGERMAX Wert mit -1 an zu geben. (default: '50:20 ClosedPosition')
<li><strong>ASC_WiggleValue</strong> - How many percent should the shutter be driven if a wiggle drive
is operated. Defaults to 5.
</li>
<li><strong>ASC_WindowRec</strong> - Name des Fensterkontaktes, an dessen Fenster der Rollladen angebracht
ist (default: none)
<li><strong>ASC_WindParameters THRESHOLD-ON[:THRESHOLD-OFF] [DRIVEPOSITION]</strong> -
Threshold for when the shutter is driven to the wind protection position. Optional
<em>THRESHOLD-OFF</em> sets the complementary value when the wind protection is disabled. Disabled
if <em>THRESHOLD-ON</em> is set to -1. Defaults to <q>50:20 <em>ASC_Closed_Pos</em></q>.
</li>
<li><strong>ASC_WindowRec_subType</strong> - Typ des verwendeten Fensterkontaktes: twostate (optisch oder
magnetisch) oder threestate (Drehgriffkontakt) (default: twostate)
<li><strong>ASC_WindowRec</strong> - Points to the window contact device, associated with the shutter.
Defaults to none.
</li>
<li><strong>ASC_WindowRec_subType</strong> - Model type of the used <em>ASC_WindowRec</em>:
<ul>
<li><strong>twostate</strong> - optical or magnetical sensors with two states: opened or closed</li>#
<li><strong>threestate</strong> - sensors with three states: opened, tilted, closed</li>
</ul>
Defaults to twostate.
</li>
<blockquote>
<p>
<strong><u>Shading</u></strong>
</p>
<p>
Shading is only available if the following prerequests are met:
<ul>
<li>
The <em>ASC_autoShuttersControlShading</em> attribute is set to on, and there is a device
of type Astro or Twilight configured to <em>ASC_twilightDevice</em>, and <em>ASC_tempSensor</em>
is set.
</li>
<li>
<em>ASC_BrightnessSensor</em> is configured to any shutter device.
</li>
<li>
All other attributes are optional and the default value for them is used, if they are not
otherwise configured. Please review the settings carefully, especially the values for
<em>StateChange_Cloudy</em> and <em>StateChange_Sunny</em>.
</li>
</ul>
</p>
<p>
The following attributes are available:
</p>
<ul>
<li><strong>ASC_Shading_Angle_Left</strong> - Minimal shading angle in relation to the window,
from when shade is applied. For example: Window is 180 &deg; (perpendicular) &minus; 85 &deg; set
for <em>ASC_Shading_Angle_Left</em> &rarr; shading starts if sun position is 95 &deg;.
Defaults to 75.
</li>
<li><strong>ASC_Shading_Angle_Right</strong> - Complements <em>ASC_Shading_Angle_Left</em> and
sets the maximum shading angle in relation to the window. For example: Window is 180 &deg;
(perpendicular) &plus; 85 &deg; set from <em>ASC_Shading_Angle_Right</em> &rarr; shading until
sun position of 265 &deg; is reached. Defaults to 75.
</li>
<li><strong>ASC_Shading_Direction</strong> - Compass point degrees for which the window resp. shutter
points. East is 90 &deg;, South 180 &deg;, West is 270 &deg; and North is 0 &deg;.
Defaults to South (180).
</li>
<li><strong>ASC_Shading_Min_Elevation</strong> - Shading starts as this point of sun elevation is
reached, depending also on other sensor values. Defaults to 25.0.
</li>
<li><strong>ASC_Shading_Min_OutsideTemperature</strong> - Shading starts at this outdoor temperature,
depending also on other sensor values. Defaults to 18.0.
</li>
<li><strong>ASC_Shading_Mode absent|always|off|home</strong> - see <em>ASC_Mode_Down</em> above,
but for shading. Defaults to off.
</li>
<li><strong>ASC_Shading_Pos</strong> - Shading position in percent.</li>
<li><strong>ASC_Shading_StateChange_Cloudy</strong> - Shading <strong>ends</strong> at this
outdoor brightness, depending also on other sensor values. Defaults to 20000.
</li>
<li><strong>ASC_Shading_StateChange_Sunny</strong> - Shading <strong>starts</strong> at this
outdoor brightness, depending also on other sensor values. Defaults to 35000.
</li>
<li><strong>ASC_Shading_WaitingPeriod</strong> - Waiting time in seconds before additional sensor values
to <em>ASC_Shading_StateChange_Sunny</em> or <em>ASC_Shading_StateChange_Cloudy</em>
are used for shading. Defaults to 120.
</li>
</ul>
</blockquote>
</ul>
</ul>
<p>
<strong><u>AutoShuttersControl <abbr>API</abbr> description</u></strong>
</p>
<p>
It's possible to access internal data of the <abbr>ASC</abbr> module by calling the <abbr>API</abbr> function.
It's possible to access internal data of the <abbr>ASC</abbr> module by calling the <abbr>API</abbr> function.
</p>
<u>Data points of a shutter device, controlled by <abbr>ASC</abbr></u>
<p>
@ -5723,11 +5767,7 @@ sub getblockAscDrivesAfterManual {
<td>ASCenable</td>
<td>Does <abbr>ASC</abbr> control the shutter?</td>
</tr>
<tr>
<td>IsDay</td>
<td>Contains the current mode of the shutter: day (after sunrise till sunset) or night (sunset till sunrise)</td>
</tr>
<table/>
</table>
</p>
<u>Data points of the <abbr>ASC</abbr> device</u>
<p>
@ -5762,7 +5802,7 @@ sub getblockAscDrivesAfterManual {
<td>ASCenable</td>
<td>Is <abbr>ASC</abbr> globally activated?</td>
</tr>
<table/>
</table>
</ul>
=end html

6
README.md
View File

@ -2,15 +2,15 @@
## Used branching model
* Master branch: Production version (copy of [fhem/fhem-mirror/blob/master/fhem/FHEM/73_AutoShuttersControl.pm](https://github.com/fhem/fhem-mirror/blob/master/fhem/FHEM/73_AutoShuttersControl.pm))
* Dev branch: Latest development version
* Devel branch: Latest development version
## Community support
The FHEM Forum is available [here](https://forum.fhem.de/) for general support.
In case you have a specific question about this module, it is recommended to find the right sub-forum.
It can either be found from the module info card using the FHEM Installer (e.g. using command `search <MODULE_NAME>`) or it can be determine from the [MAINTAINER.txt](https://github.com/fhem/fhem-mirror/blob/master/fhem/MAINTAINER.txt) file.
It can either be found from the module info card using the FHEM Installer (e.g. using command `search <MODULE_NAME>`) or it can be determined from the [MAINTAINER.txt](https://github.com/fhem/fhem-mirror/blob/master/fhem/MAINTAINER.txt) file.
## Bug reports and feature requests
Identified bugs and feature requests are tracked using [Github Issues](https://github.com/fhem/AutoShuttersControl/issues).
## Pull requests / How to participate into development
You are invited to send pull requests to the devel branch whenever you think you can contribute with some useful improvements to the module. The module maintainer will review you code and decide wether it is going to be part of the module in a future release.
You are invited to send pull requests to the devel branch whenever you think you can contribute with some useful improvements to the module. The module maintainer will review you code and decide whether it is going to be part of the module in a future release.