mirror of
https://github.com/fhem/fhem-mirror.git
synced 2025-01-31 06:39:11 +00:00
10_KNX.pm: allow exp numbers in set cmd for dpt14, (Forum #122582)
git-svn-id: https://svn.fhem.de/fhem/trunk@28023 2b470e98-0d58-463d-a4d8-8e2adae1ed80
This commit is contained in:
erwin
parent
1c7d671143
commit
5fe3247399
@ -1,5 +1,7 @@
|
||||
# Add changes at the top of the list. Keep it in ASCII, and 80-char wide.
|
||||
# Do not insert empty lines here, update check depends on it.
|
||||
- change: 10_KNX: allow exponential numbers for dpt14
|
||||
- feature: 00_KNXIO: add FIFO & rate limit for set/get to KNX-bus
|
||||
- change 58_RPI_1Wire: Added: Support for setting switches, clear command
|
||||
- new: 76_SolarForecast: solar predictions of PV systems/Consumer control
|
||||
- new: 70_PylonLowVoltage: new module for Pylontech low volt batteries
|
||||
|
||||
@ -152,6 +152,11 @@
|
||||
# do NOT remove leading & trailing zeros on reading values (hex values would be destroyed)
|
||||
# allow more than 14 char on "set dpt16" - truncate during encoding to 1st 14 char
|
||||
# hide set-pulldown for readonly dpts (dpt15,22,217,221)
|
||||
# MH 20231002 allow exp numbers in set cmd for dpt14, formatting of (dpt14) reading values
|
||||
# corr dpt9 min-limit to -671088.64
|
||||
# dpt9, dpt14: deny use of comma as dec-separator...
|
||||
# fix replacebyregex
|
||||
# rework KNX_scan
|
||||
#
|
||||
# todo replace cascading if..elsif with given
|
||||
# todo-11/2023 final removal of attr answerReading conversion
|
||||
@ -342,30 +347,30 @@ my %dpttypes = (
|
||||
'dpt8.012' => {CODE=>'dpt8', UNIT=>q{m}, PATTERN=>qr/[+-]?\d{1,5}/ixms, MIN=>-32768, MAX=>32767},
|
||||
|
||||
# 2-Octet Float value
|
||||
'dpt9' => {CODE=>'dpt9', UNIT=>q{}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>-670760, MAX=>670433.28,
|
||||
'dpt9' => {CODE=>'dpt9', UNIT=>q{}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>-671088.64, MAX=>670433.28,
|
||||
DEC=>\&dec_dpt9,ENC=>\&enc_dpt9,},
|
||||
'dpt9.001' => {CODE=>'dpt9', UNIT=>q{°C}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>-273, MAX=>670433.28},
|
||||
'dpt9.002' => {CODE=>'dpt9', UNIT=>q{K}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>-670760, MAX=>670433.28},
|
||||
'dpt9.003' => {CODE=>'dpt9', UNIT=>q{K/h}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>-670760, MAX=>670433.28},
|
||||
'dpt9.004' => {CODE=>'dpt9', UNIT=>q{lux}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>0, MAX=>670433.28},
|
||||
'dpt9.005' => {CODE=>'dpt9', UNIT=>q{m/s}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>0, MAX=>670433.28},
|
||||
'dpt9.006' => {CODE=>'dpt9', UNIT=>q{Pa}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>0, MAX=>670433.28},
|
||||
'dpt9.007' => {CODE=>'dpt9', UNIT=>q{%}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>0, MAX=>670433.28},
|
||||
'dpt9.008' => {CODE=>'dpt9', UNIT=>q{ppm}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>0, MAX=>670433.28},
|
||||
'dpt9.009' => {CODE=>'dpt9', UNIT=>q{m³/h}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>-670760, MAX=>670433.28},
|
||||
'dpt9.010' => {CODE=>'dpt9', UNIT=>q{s}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>-670760, MAX=>670433.28},
|
||||
'dpt9.011' => {CODE=>'dpt9', UNIT=>q{ms}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>-670760, MAX=>670433.28},
|
||||
'dpt9.020' => {CODE=>'dpt9', UNIT=>q{mV}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>-670760, MAX=>670433.28},
|
||||
'dpt9.021' => {CODE=>'dpt9', UNIT=>q{mA}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>-670760, MAX=>670433.28},
|
||||
'dpt9.022' => {CODE=>'dpt9', UNIT=>q{W/m²}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>-670760, MAX=>670433.28},
|
||||
'dpt9.023' => {CODE=>'dpt9', UNIT=>q{K/%}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>-670760, MAX=>670433.28},
|
||||
'dpt9.024' => {CODE=>'dpt9', UNIT=>q{kW}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>-670760, MAX=>670433.28},
|
||||
'dpt9.025' => {CODE=>'dpt9', UNIT=>q{l/h}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>-670760, MAX=>670433.28},
|
||||
'dpt9.026' => {CODE=>'dpt9', UNIT=>q{l/h}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>-670760, MAX=>670433.28},
|
||||
'dpt9.027' => {CODE=>'dpt9', UNIT=>q{°F}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>-459.6, MAX=>670433.28},
|
||||
'dpt9.028' => {CODE=>'dpt9', UNIT=>q{km/h}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>0, MAX=>670433.28},
|
||||
'dpt9.029' => {CODE=>'dpt9', UNIT=>q{g/m³}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>-0, MAX=>670433.28}, # Abs. Luftfeuchte
|
||||
'dpt9.030' => {CODE=>'dpt9', UNIT=>q{µg/m³}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>-0, MAX=>670433.28}, # Dichte
|
||||
'dpt9.001' => {CODE=>'dpt9', UNIT=>q{°C}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>-273.15, MAX=>670433.28},
|
||||
'dpt9.002' => {CODE=>'dpt9', UNIT=>q{K}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>-671088.64, MAX=>670433.28},
|
||||
'dpt9.003' => {CODE=>'dpt9', UNIT=>q{K/h}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>-671088.64, MAX=>670433.28},
|
||||
'dpt9.004' => {CODE=>'dpt9', UNIT=>q{lux}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>0, MAX=>670433.28},
|
||||
'dpt9.005' => {CODE=>'dpt9', UNIT=>q{m/s}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>0, MAX=>670433.28},
|
||||
'dpt9.006' => {CODE=>'dpt9', UNIT=>q{Pa}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>0, MAX=>670433.28},
|
||||
'dpt9.007' => {CODE=>'dpt9', UNIT=>q{%}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>0, MAX=>670433.28},
|
||||
'dpt9.008' => {CODE=>'dpt9', UNIT=>q{ppm}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>0, MAX=>670433.28},
|
||||
'dpt9.009' => {CODE=>'dpt9', UNIT=>q{m³/h}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>-671088.64, MAX=>670433.28},
|
||||
'dpt9.010' => {CODE=>'dpt9', UNIT=>q{s}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>-671088.64, MAX=>670433.28},
|
||||
'dpt9.011' => {CODE=>'dpt9', UNIT=>q{ms}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>-671088.64, MAX=>670433.28},
|
||||
'dpt9.020' => {CODE=>'dpt9', UNIT=>q{mV}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>-671088.64, MAX=>670433.28},
|
||||
'dpt9.021' => {CODE=>'dpt9', UNIT=>q{mA}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>-671088.64, MAX=>670433.28},
|
||||
'dpt9.022' => {CODE=>'dpt9', UNIT=>q{W/m²}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>-671088.64, MAX=>670433.28},
|
||||
'dpt9.023' => {CODE=>'dpt9', UNIT=>q{K/%}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>-671088.64, MAX=>670433.28},
|
||||
'dpt9.024' => {CODE=>'dpt9', UNIT=>q{kW}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>-671088.64, MAX=>670433.28},
|
||||
'dpt9.025' => {CODE=>'dpt9', UNIT=>q{l/h}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>-671088.64, MAX=>670433.28},
|
||||
'dpt9.026' => {CODE=>'dpt9', UNIT=>q{l/h}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>-671088.64, MAX=>670433.28},
|
||||
'dpt9.027' => {CODE=>'dpt9', UNIT=>q{°F}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>-459.6, MAX=>670433.28},
|
||||
'dpt9.028' => {CODE=>'dpt9', UNIT=>q{km/h}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>0, MAX=>670433.28},
|
||||
'dpt9.029' => {CODE=>'dpt9', UNIT=>q{g/m³}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>0, MAX=>670433.28}, # Abs. Luftfeuchte
|
||||
'dpt9.030' => {CODE=>'dpt9', UNIT=>q{µg/m³}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>0, MAX=>670433.28}, # Dichte
|
||||
|
||||
# Time of Day
|
||||
'dpt10' => {CODE=>'dpt10', UNIT=>q{}, PATTERN=>qr/($PAT_TIME|now)/ixms, MIN=>undef, MAX=>undef,
|
||||
@ -375,7 +380,7 @@ my %dpttypes = (
|
||||
'dpt11' => {CODE=>'dpt11', UNIT=>q{}, PATTERN=>qr/($PAT_DATE2|now)/ixms, MIN=>undef, MAX=>undef,
|
||||
DEC=>\&dec_dpt11,ENC=>\&enc_dpt11,}, # year range 1990-2089 !
|
||||
|
||||
# 4-Octet unsigned value (handled as dpt7)
|
||||
# 4-Octet unsigned value
|
||||
'dpt12' => {CODE=>'dpt12', UNIT=>q{}, PATTERN=>qr/[+-]?\d{1,10}/ixms, MIN=>0, MAX=>4294967295,
|
||||
DEC=>\&dec_dpt12,ENC=>\&enc_dpt12,},
|
||||
'dpt12.001' => {CODE=>'dpt12', UNIT=>q{p}, PATTERN=>qr/[+-]?\d{1,10}/ixms, MIN=>0, MAX=>4294967295},
|
||||
@ -398,38 +403,37 @@ my %dpttypes = (
|
||||
'dpt13.100' => {CODE=>'dpt13', UNIT=>q{s}, PATTERN=>qr/[+-]?\d{1,10}/ixms, MIN=>-2147483648, MAX=>2147483647},
|
||||
|
||||
# 4-Octet single precision float
|
||||
'dpt14' => {CODE=>'dpt14', UNIT=>q{}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef,
|
||||
'dpt14' => {CODE=>'dpt14', UNIT=>q{}, PATTERN=>qr/[+-]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.17e38,
|
||||
DEC=>\&dec_dpt14,ENC=>\&enc_dpt14,},
|
||||
'dpt14.000' => {CODE=>'dpt14', UNIT=>q{m/s²}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, # acceleration superscr - = alt8315
|
||||
'dpt14.001' => {CODE=>'dpt14', UNIT=>q{rad/s²}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, # acceleration angular
|
||||
'dpt14.002' => {CODE=>'dpt14', UNIT=>q{J/mol}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, # activation energy
|
||||
'dpt14.003' => {CODE=>'dpt14', UNIT=>q{1/s}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, # activity (radioactive)
|
||||
'dpt14.004' => {CODE=>'dpt14', UNIT=>q{mol}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef},
|
||||
'dpt14.005' => {CODE=>'dpt14', UNIT=>q{ }, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, # Amplitude
|
||||
'dpt14.006' => {CODE=>'dpt14', UNIT=>q{rad}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef},
|
||||
'dpt14.007' => {CODE=>'dpt14', UNIT=>q{°}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef},
|
||||
'dpt14.008' => {CODE=>'dpt14', UNIT=>q{Js}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, # Angular Momentum
|
||||
'dpt14.009' => {CODE=>'dpt14', UNIT=>q{rad/s}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, # Angular velocity
|
||||
'dpt14.010' => {CODE=>'dpt14', UNIT=>q{m²}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef},
|
||||
'dpt14.011' => {CODE=>'dpt14', UNIT=>q{F}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, # capacitance
|
||||
'dpt14.012' => {CODE=>'dpt14', UNIT=>q{C/m²}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, # charge density surface
|
||||
'dpt14.013' => {CODE=>'dpt14', UNIT=>q{C/m³}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, # charge density volume
|
||||
'dpt14.014' => {CODE=>'dpt14', UNIT=>q{m²N-1}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, # compressibility
|
||||
'dpt14.015' => {CODE=>'dpt14', UNIT=>q{S}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, # conductance 1/Ohm
|
||||
'dpt14.016' => {CODE=>'dpt14', UNIT=>q{S/m}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, # electrical conductivity
|
||||
'dpt14.017' => {CODE=>'dpt14', UNIT=>q{kg/m²}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, # density
|
||||
'dpt14.018' => {CODE=>'dpt14', UNIT=>q{C}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, # electric charge
|
||||
'dpt14.019' => {CODE=>'dpt14', UNIT=>q{A}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef},
|
||||
'dpt14.027' => {CODE=>'dpt14', UNIT=>q{V}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef},
|
||||
'dpt14.033' => {CODE=>'dpt14', UNIT=>q{Hz}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef},
|
||||
# 'dpt14.038' => {CODE=>'dpt14', UNIT=>"\N{U+03A9}", PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, # OHM- unicode???
|
||||
# 'dpt14.038' => {CODE=>'dpt14', UNIT=>\x{03A9}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, # OHM
|
||||
'dpt14.038' => {CODE=>'dpt14', UNIT=>q{Ohm}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, # OHM
|
||||
'dpt14.039' => {CODE=>'dpt14', UNIT=>q{m}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef},
|
||||
'dpt14.056' => {CODE=>'dpt14', UNIT=>q{W}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef},
|
||||
'dpt14.057' => {CODE=>'dpt14', UNIT=>q{cosφ}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef},
|
||||
'dpt14.068' => {CODE=>'dpt14', UNIT=>q{°C}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef},
|
||||
'dpt14.076' => {CODE=>'dpt14', UNIT=>q{m³}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef},
|
||||
'dpt14.000' => {CODE=>'dpt14', UNIT=>q{m/s²}, PATTERN=>qr/[+-]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, # acceleration superscr - = alt8315
|
||||
'dpt14.001' => {CODE=>'dpt14', UNIT=>q{rad/s²}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, # acceleration angular
|
||||
'dpt14.002' => {CODE=>'dpt14', UNIT=>q{J/mol}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, # activation energy
|
||||
'dpt14.003' => {CODE=>'dpt14', UNIT=>q{1/s}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, # activity (radioactive)
|
||||
'dpt14.004' => {CODE=>'dpt14', UNIT=>q{mol}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38},
|
||||
'dpt14.005' => {CODE=>'dpt14', UNIT=>q{ }, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, # Amplitude
|
||||
'dpt14.006' => {CODE=>'dpt14', UNIT=>q{rad}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38},
|
||||
'dpt14.007' => {CODE=>'dpt14', UNIT=>q{°}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38},
|
||||
'dpt14.008' => {CODE=>'dpt14', UNIT=>q{Js}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, # Angular Momentum
|
||||
'dpt14.009' => {CODE=>'dpt14', UNIT=>q{rad/s}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, # Angular velocity
|
||||
'dpt14.010' => {CODE=>'dpt14', UNIT=>q{m²}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38},
|
||||
'dpt14.011' => {CODE=>'dpt14', UNIT=>q{F}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, # capacitance
|
||||
'dpt14.012' => {CODE=>'dpt14', UNIT=>q{C/m²}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, # charge density surface
|
||||
'dpt14.013' => {CODE=>'dpt14', UNIT=>q{C/m³}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, # charge density volume
|
||||
'dpt14.014' => {CODE=>'dpt14', UNIT=>q{m²N-1}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, # compressibility
|
||||
'dpt14.015' => {CODE=>'dpt14', UNIT=>q{S}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, # conductance 1/Ohm
|
||||
'dpt14.016' => {CODE=>'dpt14', UNIT=>q{S/m}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, # electrical conductivity
|
||||
'dpt14.017' => {CODE=>'dpt14', UNIT=>q{kg/m²}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, # density
|
||||
'dpt14.018' => {CODE=>'dpt14', UNIT=>q{C}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, # electric charge
|
||||
'dpt14.019' => {CODE=>'dpt14', UNIT=>q{A}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38},
|
||||
'dpt14.027' => {CODE=>'dpt14', UNIT=>q{V}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38},
|
||||
'dpt14.033' => {CODE=>'dpt14', UNIT=>q{Hz}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38},
|
||||
'dpt14.038' => {CODE=>'dpt14', UNIT=>qq{\xCE\xA9}, ## no critic (ValuesAndExpressions::ProhibitEscapedCharacters)
|
||||
PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, # OHM
|
||||
'dpt14.039' => {CODE=>'dpt14', UNIT=>q{m}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38},
|
||||
'dpt14.056' => {CODE=>'dpt14', UNIT=>q{W}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38},
|
||||
'dpt14.057' => {CODE=>'dpt14', UNIT=>q{cosφ}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38},
|
||||
'dpt14.068' => {CODE=>'dpt14', UNIT=>q{°C}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38},
|
||||
'dpt14.076' => {CODE=>'dpt14', UNIT=>q{m³}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38},
|
||||
|
||||
# Access data - receive only
|
||||
'dpt15' => {CODE=>'dpt15', UNIT=>q{}, PATTERN=>qr/noset/ixms, MIN=>undef, MAX=>undef, SETLIST=>'noset',
|
||||
@ -710,7 +714,7 @@ sub KNX_Undef {
|
||||
return;
|
||||
}
|
||||
|
||||
#Places a "read" Message on the KNX-Bus
|
||||
#send a "GroupValueRead" Message to the KNX-Bus
|
||||
#The answer is treated as regular telegram
|
||||
#############################
|
||||
sub KNX_Get {
|
||||
@ -755,6 +759,8 @@ sub KNX_Get {
|
||||
|
||||
KNX_Log ($name, 5, qq{request value for GAD: $group GAD-NAME: $gadName});
|
||||
|
||||
delete $hash->{'.noreplyflag'}->{$gadName}; # allow events for groupValueResponse when triggerd by fhem 9/2023
|
||||
|
||||
IOWrite($hash, $KNXID, 'r' . $groupc); #send read-request to the bus
|
||||
|
||||
if (defined($FW_wname)) {
|
||||
@ -763,7 +769,7 @@ sub KNX_Get {
|
||||
return;
|
||||
}
|
||||
|
||||
#send Value to bus
|
||||
#send a "GroupValueWrite" to bus
|
||||
#############################
|
||||
sub KNX_Set {
|
||||
my ($hash, $name, $targetGadName, @arg) = @_;
|
||||
@ -825,7 +831,7 @@ sub KNX_Set {
|
||||
$value = KNX_decodeByDpt($hash, $transval, $targetGadName) if ($model =~ m/^dpt(?:3|10|11|16|19)/ixms);
|
||||
|
||||
#apply post processing for state and set all readings
|
||||
KNX_SetReadings($hash, $targetGadName, $value, $rdName, undef);
|
||||
KNX_SetReadings($hash, $targetGadName, $value, undef, undef);
|
||||
|
||||
KNX_Log ($name, 5, 'exit');
|
||||
return;
|
||||
@ -1136,7 +1142,22 @@ sub KNX_Parse {
|
||||
|
||||
my $getName = $deviceHash->{GADDETAILS}->{$gadName}->{RDNAMEGET};
|
||||
|
||||
#handle write and reply messages
|
||||
my $trigger = 1; # default create events
|
||||
=pod
|
||||
#GroupValueResponse messages when not triggered by read from fhem
|
||||
if ($cmd =~ /[p]/ixms && exists($deviceHash->{'.noreplyflag'}->{$gadName})) {
|
||||
my $nrts = $deviceHash->{'.noreplyflag'}->{$gadName};
|
||||
if (gettimeofday() > $nrts) {
|
||||
delete $deviceHash->{'.noreplyflag'}->{$gadName};
|
||||
}
|
||||
else {
|
||||
KNX_Log ($deviceName, 1 ,qq{reply msg for $deviceName $gadName will not trigger events});
|
||||
# next; # ignore msg completly
|
||||
$trigger = 0;
|
||||
}
|
||||
}
|
||||
=cut
|
||||
#handle GroupValueWrite and GroupValueResponse messages
|
||||
if ($cmd =~ /[w|p]/ixms) {
|
||||
#decode message
|
||||
my $transval = KNX_decodeByDpt ($deviceHash, $val, $gadName);
|
||||
@ -1148,14 +1169,26 @@ sub KNX_Parse {
|
||||
KNX_Log ($deviceName, 4, qq{readingName=$getName value=$transval});
|
||||
|
||||
#apply post processing for state and set all readings
|
||||
KNX_SetReadings($deviceHash, $gadName, $transval, $getName, $src);
|
||||
KNX_SetReadings($deviceHash, $gadName, $transval, $src, $trigger);
|
||||
}
|
||||
|
||||
#handle read messages
|
||||
#handle GroupValueRead messages
|
||||
elsif ($cmd =~ /[r]/ixms) {
|
||||
my $cmdAttr = AttrVal($deviceName, 'putCmd', undef);
|
||||
next if (! defined($cmdAttr) || $cmdAttr eq q{});
|
||||
|
||||
=pod
|
||||
if ($cmdAttr eq 'noReply') {
|
||||
if ($iohash->{PhyAddr} eq KNX_hexToName2($src)) { # match src-address with phy of IOdev
|
||||
# from fhem - delete ignore reply flag
|
||||
delete $deviceHash->{'.noreplyflag'}->{$gadName}; # allow when sent from fhem
|
||||
}
|
||||
else {
|
||||
KNX_Log ($deviceName, 1, q{read msg from } . KNX_hexToName2($src) . qq{ for $deviceName $gadName IODev= $iohash->{PhyAddr}});
|
||||
$deviceHash->{'.noreplyflag'}->{$gadName} = gettimeofday() + 2;
|
||||
}
|
||||
next; # cannot use putCmd logic!
|
||||
}
|
||||
=cut
|
||||
# generate <putname>
|
||||
my $putName = $getName =~ s/get/put/irxms;
|
||||
$putName .= ($putName eq $getName)?q{-put}:q{}; # nosuffix
|
||||
@ -1176,7 +1209,7 @@ sub KNX_Parse {
|
||||
readingsSingleUpdate($deviceHash, $putName, $value,0);
|
||||
IOWrite ($deviceHash, $KNXID, 'p' . $gadCode . $transval);
|
||||
} else {
|
||||
KNX_Log ($deviceName, 2, qq{putCmd encoding failed for reading=$gadName - VALUE=$value});
|
||||
KNX_Log ($deviceName, 2, qq{putCmd encoding failed for gadName=$gadName - VALUE=$value});
|
||||
}
|
||||
}
|
||||
#/process message
|
||||
@ -1187,7 +1220,7 @@ sub KNX_Parse {
|
||||
########## begin of private functions ##########
|
||||
|
||||
### KNX_autoCreate
|
||||
# check wether we must do autocreate...
|
||||
# check wether we have to do autocreate...
|
||||
# on entry: $iohash, $gadcode
|
||||
# on exit: return string for autocreate
|
||||
sub KNX_autoCreate {
|
||||
@ -1209,16 +1242,11 @@ sub KNX_autoCreate {
|
||||
}
|
||||
|
||||
### KNX_SetReadings is called from KNX_Set and KNX_Parse
|
||||
# calling param: $hash, $gadName, $value, $rdName, caller (set/parse)
|
||||
# calling param: $hash, $gadName, $value, caller (set/parse), trigger (event yes/no)
|
||||
sub KNX_SetReadings {
|
||||
my ($hash, $gadName, $value, $rdName, $src) = @_;
|
||||
my $name = $hash->{NAME};
|
||||
my ($hash, $gadName, $value, $src, $trigger) = @_;
|
||||
|
||||
# $value *= 1 if (looks_like_number ($value)); # remove trailing zeros # changed 8/2023
|
||||
## my $model = $hash->{GADDETAILS}->{$gadName}->{MODEL};
|
||||
## if (looks_like_number($value) && $dpttypes{$model}->{CODE} !~ /^dpt(?:4|15|16|22|217|221|232|251|RAW)/ixms) {
|
||||
## $value *= 1; # remove leading & trailing zeros # changed 8/2023
|
||||
## }
|
||||
my $name = $hash->{NAME};
|
||||
|
||||
#append post-string, if supplied: format attr overrides supplied unit!
|
||||
my $model = $hash->{GADDETAILS}->{$gadName}->{MODEL};
|
||||
@ -1230,12 +1258,17 @@ sub KNX_SetReadings {
|
||||
$value .= q{ } . $unit;
|
||||
}
|
||||
|
||||
my $lsvalue = 'fhem'; # called from set
|
||||
my $rdName = $hash->{GADDETAILS}->{$gadName}->{RDNAMESET};
|
||||
if (defined($src) && ($src ne q{})) { # called from parse
|
||||
$lsvalue = KNX_hexToName2($src);
|
||||
$rdName = $hash->{GADDETAILS}->{$gadName}->{RDNAMEGET};
|
||||
}
|
||||
my $trievents = (defined($trigger))?$trigger:1;
|
||||
|
||||
#execute stateRegex
|
||||
my $state = KNX_replaceByRegex ($hash, $rdName, $value);
|
||||
|
||||
my $lsvalue = 'fhem'; # called from set
|
||||
$lsvalue = KNX_hexToName2($src) if (defined($src) && ($src ne q{})); # called from parse
|
||||
|
||||
readingsBeginUpdate($hash);
|
||||
readingsBulkUpdate($hash, 'last-sender', $lsvalue);
|
||||
readingsBulkUpdate($hash, $rdName, $value);
|
||||
@ -1258,7 +1291,7 @@ sub KNX_SetReadings {
|
||||
}
|
||||
readingsBulkUpdate($hash, 'state', $state);
|
||||
}
|
||||
readingsEndUpdate($hash, 1);
|
||||
readingsEndUpdate($hash, $trievents);
|
||||
return;
|
||||
}
|
||||
|
||||
@ -1389,7 +1422,8 @@ sub KNX_replaceByRegex {
|
||||
}
|
||||
else { #replace value
|
||||
$tempVal =~ s/$regPair[0]/$regPair[1]/gixms;
|
||||
($retVal = $tempVal) =~ s/[:]/ /xms;
|
||||
$retVal = $tempVal =~ s/[:]/ /rxms;
|
||||
$retVal =~ s/-\s/-/xms; # if $regpair[1] ends with - supress blank between word and value
|
||||
}
|
||||
last;
|
||||
}
|
||||
@ -1415,7 +1449,6 @@ sub KNX_limit {
|
||||
my $offset = 0;
|
||||
$factor = $dpttypes{$model}->{FACTOR} if exists($dpttypes{$model}->{FACTOR});
|
||||
$offset = $dpttypes{$model}->{OFFSET} if exists($dpttypes{$model}->{OFFSET});
|
||||
return $value if ($factor == 1 && $offset == 0); # shortcut
|
||||
#get limits
|
||||
my $min = $dpttypes{$model}->{MIN};
|
||||
my $max = $dpttypes{$model}->{MAX};
|
||||
@ -1492,7 +1525,9 @@ sub KNX_encodeByDpt {
|
||||
KNX_Log ($name, 5, qq{gadName= $gadName value= $value model= $model pattern= $pattern});
|
||||
|
||||
my $lvalue = KNX_limit($hash, $value, $model, 'ENCODE');
|
||||
KNX_Log ($name, 4, qq{gadName= $gadName modified... Input= $value Output= $lvalue Model= $model}) if ($value ne $lvalue);
|
||||
if ((looks_like_number($value)?$value * 1:$value) ne $lvalue) { # $value may have 3.0 apperance
|
||||
KNX_Log ($name, 3, qq{gadName= $gadName modified by limits... Input= $value Output= $lvalue Model= $model});
|
||||
}
|
||||
|
||||
if (ref($dpttypes{$code}->{ENC}) eq 'CODE') {
|
||||
my $hexval = $dpttypes{$code}->{ENC}->($lvalue, $model);
|
||||
@ -1855,7 +1890,7 @@ sub dec_dpt14 { #4-Octet single precision float
|
||||
my $model = shift;
|
||||
my $hash = shift;
|
||||
$numval = KNX_limit ($hash, $numval, $model, 'DECODE');
|
||||
return sprintf ('%.3f', $numval);
|
||||
return sprintf ('%.7g', $numval);
|
||||
}
|
||||
|
||||
sub dec_dpt15 { #4-Octet Access data receive only
|
||||
@ -1879,7 +1914,6 @@ sub dec_dpt16 { #14-Octet String or dpt4: single Char string
|
||||
#convert from latin-1
|
||||
$state = encode ('utf8', decode('iso-8859-1',$state)) if ($model =~ m/^dpt(?:16.001|4.002)$/xms);
|
||||
$state = q{} if ($state =~ m/^[\x00]+$/ixms); # case all zeros received
|
||||
# $state = q{} if ($state =~ m/^[\x00]/ixms); # case all zeros received
|
||||
$state =~ s/[\x00-\x1F]+//gxms; # remove non printable chars
|
||||
return $state;
|
||||
}
|
||||
@ -2009,7 +2043,7 @@ sub main::KNX_scan {
|
||||
my $i = 0; #counter devices
|
||||
my $j = 0; #counter devices with get
|
||||
my $k = 0; #counter total get's
|
||||
my $getsarr = q{};
|
||||
my $iohash;
|
||||
|
||||
foreach my $knxdef (@devlist) {
|
||||
next unless $knxdef;
|
||||
@ -2018,7 +2052,8 @@ sub main::KNX_scan {
|
||||
next if ((! defined($devhash)) || ($devhash->{TYPE} ne 'KNX'));
|
||||
|
||||
#check if IO-device is ready
|
||||
next if (KNX_chkIO($devhash->{IODev}->{NAME}) != 1);
|
||||
$iohash = $devhash->{IODev};
|
||||
next if (KNX_chkIO($iohash) != 1);
|
||||
|
||||
$i++;
|
||||
my $k0 = $k; #save previous number of get's
|
||||
@ -2028,42 +2063,43 @@ sub main::KNX_scan {
|
||||
my $option = $devhash->{GADDETAILS}->{$key}->{OPTION};
|
||||
next if (defined($option) && $option =~ /(?:set|listenonly)/ixms);
|
||||
$k++;
|
||||
$getsarr .= $knxdef . q{ } . $key . q{,};
|
||||
push (@{$iohash->{Helper}->{knxscan}}, $knxdef, $key);
|
||||
}
|
||||
$j++ if ($k > $k0);
|
||||
}
|
||||
Log3 (undef, 3, qq{KNX_scan: $i devices selected (regex= $devs) / $j devices with get / $k "gets" executing...});
|
||||
doKNX_scan($getsarr) if ($k > 0);
|
||||
doKNX_scan($iohash) if ($k > 0);
|
||||
return $k;
|
||||
}
|
||||
|
||||
### check if IODev is ready
|
||||
# retuns undef on not ready
|
||||
sub KNX_chkIO {
|
||||
my $iodev = shift || return;
|
||||
my $iohash = shift // return;
|
||||
|
||||
if ($defs{$iodev}->{TYPE} =~ /(?:KNXIO|FHEM2FHEM)/xms) {
|
||||
return if ($defs{$iodev}->{STATE} ne 'connected');
|
||||
if ($iohash->{TYPE} =~ /(?:KNXIO|FHEM2FHEM)/xms) {
|
||||
return if ($iohash->{STATE} ne 'connected');
|
||||
}
|
||||
else { # all other IO-devs...
|
||||
return if ($defs{$iodev}->{STATE} !~ /(?:initialized|opened|connected)/ixms);
|
||||
return if ($iohash->{STATE} !~ /(?:initialized|opened|connected)/ixms);
|
||||
}
|
||||
return 1;
|
||||
}
|
||||
|
||||
### issue all get cmd's - each one delayed by InternalTimer
|
||||
sub doKNX_scan {
|
||||
my ($devgad, $arr) = split(/,/xms,shift,2);
|
||||
my $iohash = shift // return;
|
||||
|
||||
my ($name, $gadName) = split(/[\s]/xms,$devgad);
|
||||
KNX_Get ($defs{$name}, $name, $gadName);
|
||||
|
||||
if (defined($arr) && $arr ne q{}) {
|
||||
my $count = split(/,/xms,$arr); # number of remainig pairs
|
||||
my $delay = ($count % 10 == 0)?2:0.2; # extra delay on each 10th request
|
||||
return InternalTimer(gettimeofday() + $delay,\&doKNX_scan,$arr); # does not support array-> use string...
|
||||
my $count = scalar(@{$iohash->{Helper}->{knxscan}}); # / 2
|
||||
if ($count > 0 ) {
|
||||
my $devName = shift(@{$iohash->{Helper}->{knxscan}});
|
||||
my $gadName = shift(@{$iohash->{Helper}->{knxscan}});
|
||||
KNX_Get ($defs{$devName}, $devName, $gadName);
|
||||
my $delay = ($count % 20 == 0)?2:0.3; # extra delay on each 10th request
|
||||
return InternalTimer(gettimeofday() + $delay,\&doKNX_scan,$iohash);
|
||||
}
|
||||
Log3 (undef, 3, q{KNX_scan: finished});
|
||||
delete $iohash->{Helper}->{knxscan};
|
||||
Log3 ($iohash, 3, q{KNX_scan: finished});
|
||||
return;
|
||||
}
|
||||
|
||||
@ -2424,29 +2460,29 @@ Examples:
|
||||
<li><b>dpt8.010 </b> -32768..32767 %</li>
|
||||
<li><b>dpt8.011 </b> -32768..32767 °</li>
|
||||
<li><b>dpt8.012 </b> -32768..32767 m</li>
|
||||
<li><b>dpt9 </b> -670760.0..+670433.28</li>
|
||||
<li><b>dpt9.001 </b> -274.0..+670433.28 °C</li>
|
||||
<li><b>dpt9.002 </b> -670760.0..+670433.28 K</li>
|
||||
<li><b>dpt9.003 </b> -670760.0..+670433.28 K/h</li>
|
||||
<li><b>dpt9.004 </b> -670760.0..+670433.28 lux</li>
|
||||
<li><b>dpt9.005 </b> -670760.0..+670433.28 m/s</li>
|
||||
<li><b>dpt9.006 </b> -670760.0..+670433.28 Pa</li>
|
||||
<li><b>dpt9.007 </b> -670760.0..+670433.28 %</li>
|
||||
<li><b>dpt9.008 </b> -670760.0..+670433.28 ppm</li>
|
||||
<li><b>dpt9.009 </b> -670760.0..+670433.28 m³/h</li>
|
||||
<li><b>dpt9.010 </b> -670760.0..+670433.28 s</li>
|
||||
<li><b>dpt9.011 </b> -670760.0..+670433.28 ms</li>
|
||||
<li><b>dpt9.020 </b> -670760.0..+670433.28 mV</li>
|
||||
<li><b>dpt9.021 </b> -670760.0..+670433.28 mA</li>
|
||||
<li><b>dpt9.022 </b> -670760.0..+670433.28 W/m²</li>
|
||||
<li><b>dpt9.023 </b> -670760.0..+670433.28 K/%</li>
|
||||
<li><b>dpt9.024 </b> -670760.0..+670433.28 kW</li>
|
||||
<li><b>dpt9.025 </b> -670760.0..+670433.28 l/h</li>
|
||||
<li><b>dpt9.026 </b> -670760.0..+670433.28 l/h</li>
|
||||
<li><b>dpt9 </b> -671088.64..+670433.28</li>
|
||||
<li><b>dpt9.001 </b> -273.15..+670433.28 °C</li>
|
||||
<li><b>dpt9.002 </b> -671088.64..+670433.28 K</li>
|
||||
<li><b>dpt9.003 </b> -671088.64..+670433.28 K/h</li>
|
||||
<li><b>dpt9.004 </b> 0..+670433.28 lux</li>
|
||||
<li><b>dpt9.005 </b> 0..+670433.28 m/s</li>
|
||||
<li><b>dpt9.006 </b> 0..+670433.28 Pa</li>
|
||||
<li><b>dpt9.007 </b> 0..+670433.28 %</li>
|
||||
<li><b>dpt9.008 </b> 0..+670433.28 ppm</li>
|
||||
<li><b>dpt9.009 </b> -671088.64..+670433.28 m³/h</li>
|
||||
<li><b>dpt9.010 </b> -671088.64..+670433.28 s</li>
|
||||
<li><b>dpt9.011 </b> -671088.64..+670433.28 ms</li>
|
||||
<li><b>dpt9.020 </b> -671088.64..+670433.28 mV</li>
|
||||
<li><b>dpt9.021 </b> -671088.64..+670433.28 mA</li>
|
||||
<li><b>dpt9.022 </b> -671088.64..+670433.28 W/m²</li>
|
||||
<li><b>dpt9.023 </b> -671088.64..+670433.28 K/%</li>
|
||||
<li><b>dpt9.024 </b> -671088.64..+670433.28 kW</li>
|
||||
<li><b>dpt9.025 </b> -671088.64..+670433.28 l/h</li>
|
||||
<li><b>dpt9.026 </b> -671088.64..+670433.28 l/h</li>
|
||||
<li><b>dpt9.027 </b> -459.6..+670433.28 °F</li>
|
||||
<li><b>dpt9.028 </b> -670760.0..+670433.28 km/h</li>
|
||||
<li><b>dpt9.029 </b> -670760.0..+670433.28 g/m³</li>
|
||||
<li><b>dpt9.030 </b> -670760.0..+670433.28 μg/m³</li>
|
||||
<li><b>dpt9.028 </b> 0..+670433.28 km/h</li>
|
||||
<li><b>dpt9.029 </b> 0..+670433.28 g/m³</li>
|
||||
<li><b>dpt9.030 </b> 0..+670433.28 μg/m³</li>
|
||||
<li><b>dpt10 </b> HH:MM:SS (Time)</li>
|
||||
<li><b>dpt11 </b> DD.MM.YYYY (Date)</li>
|
||||
<li><b>dpt12 </b> 0..+4294967295</li>
|
||||
@ -2465,35 +2501,35 @@ Examples:
|
||||
<li><b>dpt13.015</b> -2147483648..2147483647 kVARh</li>
|
||||
<li><b>dpt13.016</b> -2147483648..2147483647 MWh</li>
|
||||
<li><b>dpt13.100</b> -2147483648..2147483647 s</li>
|
||||
<li><b>dpt14 </b> -1.17e-38..+3.4e+38 (IEE754 floatingPoint)</li>
|
||||
<li><b>dpt14.000</b> -1.17e-38..+3.4e+38 m/s²</li>
|
||||
<li><b>dpt14.001</b> -1.17e-38..+3.4e+38 rad/s²</li>
|
||||
<li><b>dpt14.002</b> -1.17e-38..+3.4e+38 J/mol</li>
|
||||
<li><b>dpt14.003</b> -1.17e-38..+3.4e+38 1/s</li>
|
||||
<li><b>dpt14.004</b> -1.17e-38..+3.4e+38 mol</li>
|
||||
<li><b>dpt14.005</b> -1.17e-38..+3.4e+38 -</li>
|
||||
<li><b>dpt14.006</b> -1.17e-38..+3.4e+38 rad</li>
|
||||
<li><b>dpt14.007</b> -1.17e-38..+3.4e+38 °</li>
|
||||
<li><b>dpt14.008</b> -1.17e-38..+3.4e+38 Js</li>
|
||||
<li><b>dpt14.009</b> -1.17e-38..+3.4e+38 rad/s</li>
|
||||
<li><b>dpt14.010</b> -1.17e-38..+3.4e+38 m²</li>
|
||||
<li><b>dpt14.011</b> -1.17e-38..+3.4e+38 F</li>
|
||||
<li><b>dpt14.012</b> -1.17e-38..+3.4e+38 C/m²</li>
|
||||
<li><b>dpt14.013</b> -1.17e-38..+3.4e+38 C/m³</li>
|
||||
<li><b>dpt14.014</b> -1.17e-38..+3.4e+38 m²N-1</li>
|
||||
<li><b>dpt14.015</b> -1.17e-38..+3.4e+38 S</li>
|
||||
<li><b>dpt14.016</b> -1.17e-38..+3.4e+38 S/m</li>
|
||||
<li><b>dpt14.017</b> -1.17e-38..+3.4e+38 kg/m³</li>
|
||||
<li><b>dpt14.018</b> -1.17e-38..+3.4e+38 C</li>
|
||||
<li><b>dpt14.019</b> -1.17e-38..+3.4e+38 A</li>
|
||||
<li><b>dpt14.027</b> -1.17e-38..+3.4e+38 V</li>
|
||||
<li><b>dpt14.033</b> -1.17e-38..+3.4e+38 Hz</li>
|
||||
<li><b>dpt14.038</b> -1.17e-38..+3.4e+38 Ω</li>
|
||||
<li><b>dpt14.039</b> -1.17e-38..+3.4e+38 m</li>
|
||||
<li><b>dpt14.056</b> -1.17e-38..+3.4e+38 W</li>
|
||||
<li><b>dpt14.057</b> -1.17e-38..+3.4e+38 cosφ</li>
|
||||
<li><b>dpt14.068</b> -1.17e-38..+3.4e+38 °C</li>
|
||||
<li><b>dpt14.076</b> -1.17e-38..+3.4e+38 m³</li>
|
||||
<li><b>dpt14 </b> -1.4e-45..+1.7e+38 (IEE754 floatingPoint)</li>
|
||||
<li><b>dpt14.000</b> -1.4e-45..+1.7e+38 m/s²</li>
|
||||
<li><b>dpt14.001</b> -1.4e-45..+1.7e+38 rad/s²</li>
|
||||
<li><b>dpt14.002</b> -1.4e-45..+1.7e+38 J/mol</li>
|
||||
<li><b>dpt14.003</b> -1.4e-45..+1.7e+38 1/s</li>
|
||||
<li><b>dpt14.004</b> -1.4e-45..+1.7e+38 mol</li>
|
||||
<li><b>dpt14.005</b> -1.4e-45..+1.7e+38 -</li>
|
||||
<li><b>dpt14.006</b> -1.4e-45..+1.7e+38 rad</li>
|
||||
<li><b>dpt14.007</b> -1.4e-45..+1.7e+38 °</li>
|
||||
<li><b>dpt14.008</b> -1.4e-45..+1.7e+38 Js</li>
|
||||
<li><b>dpt14.009</b> -1.4e-45..+1.7e+38 rad/s</li>
|
||||
<li><b>dpt14.010</b> -1.4e-45..+1.7e+38 m²</li>
|
||||
<li><b>dpt14.011</b> -1.4e-45..+1.7e+38 F</li>
|
||||
<li><b>dpt14.012</b> -1.4e-45..+1.7e+38 C/m²</li>
|
||||
<li><b>dpt14.013</b> -1.4e-45..+1.7e+38 C/m³</li>
|
||||
<li><b>dpt14.014</b> -1.4e-45..+1.7e+38 m²N-1</li>
|
||||
<li><b>dpt14.015</b> -1.4e-45..+1.7e+38 S</li>
|
||||
<li><b>dpt14.016</b> -1.4e-45..+1.7e+38 S/m</li>
|
||||
<li><b>dpt14.017</b> -1.4e-45..+1.7e+38 kg/m³</li>
|
||||
<li><b>dpt14.018</b> -1.4e-45..+1.7e+38 C</li>
|
||||
<li><b>dpt14.019</b> -1.4e-45..+1.7e+38 A</li>
|
||||
<li><b>dpt14.027</b> -1.4e-45..+1.7e+38 V</li>
|
||||
<li><b>dpt14.033</b> -1.4e-45..+1.7e+38 Hz</li>
|
||||
<li><b>dpt14.038</b> -1.4e-45..+1.7e+38 Ω</li>
|
||||
<li><b>dpt14.039</b> -1.4e-45..+1.7e+38 m</li>
|
||||
<li><b>dpt14.056</b> -1.4e-45..+1.7e+38 W</li>
|
||||
<li><b>dpt14.057</b> -1.4e-45..+1.7e+38 cosφ</li>
|
||||
<li><b>dpt14.068</b> -1.4e-45..+1.7e+38 °C</li>
|
||||
<li><b>dpt14.076</b> -1.4e-45..+1.7e+38 m³</li>
|
||||
<li><b>dpt15.000</b> Access-code (readonly)</li>
|
||||
<li><b>dpt16 </b> 14 char ASCII string</li>
|
||||
<li><b>dpt16.000</b> 14 char ASCII string</li>
|
||||
|
||||
Loading…
Reference in New Issue
Block a user