diff --git a/fhem/CHANGED b/fhem/CHANGED index 7acc3431c..0843cefda 100644 --- a/fhem/CHANGED +++ b/fhem/CHANGED @@ -1,5 +1,7 @@ # Add changes at the top of the list. Keep it in ASCII, and 80-char wide. # Do not insert empty lines here, update check depends on it. + - change: 10_KNX: allow exponential numbers for dpt14 + - feature: 00_KNXIO: add FIFO & rate limit for set/get to KNX-bus - change 58_RPI_1Wire: Added: Support for setting switches, clear command - new: 76_SolarForecast: solar predictions of PV systems/Consumer control - new: 70_PylonLowVoltage: new module for Pylontech low volt batteries diff --git a/fhem/FHEM/10_KNX.pm b/fhem/FHEM/10_KNX.pm index 2464a25b2..433868bf4 100644 --- a/fhem/FHEM/10_KNX.pm +++ b/fhem/FHEM/10_KNX.pm @@ -152,6 +152,11 @@ # do NOT remove leading & trailing zeros on reading values (hex values would be destroyed) # allow more than 14 char on "set dpt16" - truncate during encoding to 1st 14 char # hide set-pulldown for readonly dpts (dpt15,22,217,221) +# MH 20231002 allow exp numbers in set cmd for dpt14, formatting of (dpt14) reading values +# corr dpt9 min-limit to -671088.64 +# dpt9, dpt14: deny use of comma as dec-separator... +# fix replacebyregex +# rework KNX_scan # # todo replace cascading if..elsif with given # todo-11/2023 final removal of attr answerReading conversion @@ -342,30 +347,30 @@ my %dpttypes = ( 'dpt8.012' => {CODE=>'dpt8', UNIT=>q{m}, PATTERN=>qr/[+-]?\d{1,5}/ixms, MIN=>-32768, MAX=>32767}, # 2-Octet Float value - 'dpt9' => {CODE=>'dpt9', UNIT=>q{}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>-670760, MAX=>670433.28, + 'dpt9' => {CODE=>'dpt9', UNIT=>q{}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>-671088.64, MAX=>670433.28, DEC=>\&dec_dpt9,ENC=>\&enc_dpt9,}, - 'dpt9.001' => {CODE=>'dpt9', UNIT=>q{°C}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>-273, MAX=>670433.28}, - 'dpt9.002' => {CODE=>'dpt9', UNIT=>q{K}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>-670760, MAX=>670433.28}, - 'dpt9.003' => {CODE=>'dpt9', UNIT=>q{K/h}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>-670760, MAX=>670433.28}, - 'dpt9.004' => {CODE=>'dpt9', UNIT=>q{lux}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>0, MAX=>670433.28}, - 'dpt9.005' => {CODE=>'dpt9', UNIT=>q{m/s}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>0, MAX=>670433.28}, - 'dpt9.006' => {CODE=>'dpt9', UNIT=>q{Pa}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>0, MAX=>670433.28}, - 'dpt9.007' => {CODE=>'dpt9', UNIT=>q{%}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>0, MAX=>670433.28}, - 'dpt9.008' => {CODE=>'dpt9', UNIT=>q{ppm}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>0, MAX=>670433.28}, - 'dpt9.009' => {CODE=>'dpt9', UNIT=>q{m³/h}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>-670760, MAX=>670433.28}, - 'dpt9.010' => {CODE=>'dpt9', UNIT=>q{s}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>-670760, MAX=>670433.28}, - 'dpt9.011' => {CODE=>'dpt9', UNIT=>q{ms}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>-670760, MAX=>670433.28}, - 'dpt9.020' => {CODE=>'dpt9', UNIT=>q{mV}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>-670760, MAX=>670433.28}, - 'dpt9.021' => {CODE=>'dpt9', UNIT=>q{mA}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>-670760, MAX=>670433.28}, - 'dpt9.022' => {CODE=>'dpt9', UNIT=>q{W/m²}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>-670760, MAX=>670433.28}, - 'dpt9.023' => {CODE=>'dpt9', UNIT=>q{K/%}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>-670760, MAX=>670433.28}, - 'dpt9.024' => {CODE=>'dpt9', UNIT=>q{kW}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>-670760, MAX=>670433.28}, - 'dpt9.025' => {CODE=>'dpt9', UNIT=>q{l/h}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>-670760, MAX=>670433.28}, - 'dpt9.026' => {CODE=>'dpt9', UNIT=>q{l/h}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>-670760, MAX=>670433.28}, - 'dpt9.027' => {CODE=>'dpt9', UNIT=>q{°F}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>-459.6, MAX=>670433.28}, - 'dpt9.028' => {CODE=>'dpt9', UNIT=>q{km/h}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>0, MAX=>670433.28}, - 'dpt9.029' => {CODE=>'dpt9', UNIT=>q{g/m³}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>-0, MAX=>670433.28}, # Abs. Luftfeuchte - 'dpt9.030' => {CODE=>'dpt9', UNIT=>q{µg/m³}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>-0, MAX=>670433.28}, # Dichte + 'dpt9.001' => {CODE=>'dpt9', UNIT=>q{°C}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>-273.15, MAX=>670433.28}, + 'dpt9.002' => {CODE=>'dpt9', UNIT=>q{K}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>-671088.64, MAX=>670433.28}, + 'dpt9.003' => {CODE=>'dpt9', UNIT=>q{K/h}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>-671088.64, MAX=>670433.28}, + 'dpt9.004' => {CODE=>'dpt9', UNIT=>q{lux}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>0, MAX=>670433.28}, + 'dpt9.005' => {CODE=>'dpt9', UNIT=>q{m/s}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>0, MAX=>670433.28}, + 'dpt9.006' => {CODE=>'dpt9', UNIT=>q{Pa}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>0, MAX=>670433.28}, + 'dpt9.007' => {CODE=>'dpt9', UNIT=>q{%}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>0, MAX=>670433.28}, + 'dpt9.008' => {CODE=>'dpt9', UNIT=>q{ppm}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>0, MAX=>670433.28}, + 'dpt9.009' => {CODE=>'dpt9', UNIT=>q{m³/h}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>-671088.64, MAX=>670433.28}, + 'dpt9.010' => {CODE=>'dpt9', UNIT=>q{s}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>-671088.64, MAX=>670433.28}, + 'dpt9.011' => {CODE=>'dpt9', UNIT=>q{ms}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>-671088.64, MAX=>670433.28}, + 'dpt9.020' => {CODE=>'dpt9', UNIT=>q{mV}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>-671088.64, MAX=>670433.28}, + 'dpt9.021' => {CODE=>'dpt9', UNIT=>q{mA}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>-671088.64, MAX=>670433.28}, + 'dpt9.022' => {CODE=>'dpt9', UNIT=>q{W/m²}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>-671088.64, MAX=>670433.28}, + 'dpt9.023' => {CODE=>'dpt9', UNIT=>q{K/%}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>-671088.64, MAX=>670433.28}, + 'dpt9.024' => {CODE=>'dpt9', UNIT=>q{kW}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>-671088.64, MAX=>670433.28}, + 'dpt9.025' => {CODE=>'dpt9', UNIT=>q{l/h}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>-671088.64, MAX=>670433.28}, + 'dpt9.026' => {CODE=>'dpt9', UNIT=>q{l/h}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>-671088.64, MAX=>670433.28}, + 'dpt9.027' => {CODE=>'dpt9', UNIT=>q{°F}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>-459.6, MAX=>670433.28}, + 'dpt9.028' => {CODE=>'dpt9', UNIT=>q{km/h}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>0, MAX=>670433.28}, + 'dpt9.029' => {CODE=>'dpt9', UNIT=>q{g/m³}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>0, MAX=>670433.28}, # Abs. Luftfeuchte + 'dpt9.030' => {CODE=>'dpt9', UNIT=>q{µg/m³}, PATTERN=>qr/[-+]?(?:\d*[.])?\d+/ixms, MIN=>0, MAX=>670433.28}, # Dichte # Time of Day 'dpt10' => {CODE=>'dpt10', UNIT=>q{}, PATTERN=>qr/($PAT_TIME|now)/ixms, MIN=>undef, MAX=>undef, @@ -375,7 +380,7 @@ my %dpttypes = ( 'dpt11' => {CODE=>'dpt11', UNIT=>q{}, PATTERN=>qr/($PAT_DATE2|now)/ixms, MIN=>undef, MAX=>undef, DEC=>\&dec_dpt11,ENC=>\&enc_dpt11,}, # year range 1990-2089 ! - # 4-Octet unsigned value (handled as dpt7) + # 4-Octet unsigned value 'dpt12' => {CODE=>'dpt12', UNIT=>q{}, PATTERN=>qr/[+-]?\d{1,10}/ixms, MIN=>0, MAX=>4294967295, DEC=>\&dec_dpt12,ENC=>\&enc_dpt12,}, 'dpt12.001' => {CODE=>'dpt12', UNIT=>q{p}, PATTERN=>qr/[+-]?\d{1,10}/ixms, MIN=>0, MAX=>4294967295}, @@ -398,38 +403,37 @@ my %dpttypes = ( 'dpt13.100' => {CODE=>'dpt13', UNIT=>q{s}, PATTERN=>qr/[+-]?\d{1,10}/ixms, MIN=>-2147483648, MAX=>2147483647}, # 4-Octet single precision float - 'dpt14' => {CODE=>'dpt14', UNIT=>q{}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef, + 'dpt14' => {CODE=>'dpt14', UNIT=>q{}, PATTERN=>qr/[+-]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.17e38, DEC=>\&dec_dpt14,ENC=>\&enc_dpt14,}, - 'dpt14.000' => {CODE=>'dpt14', UNIT=>q{m/s²}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, # acceleration superscr - = alt8315 - 'dpt14.001' => {CODE=>'dpt14', UNIT=>q{rad/s²}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, # acceleration angular - 'dpt14.002' => {CODE=>'dpt14', UNIT=>q{J/mol}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, # activation energy - 'dpt14.003' => {CODE=>'dpt14', UNIT=>q{1/s}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, # activity (radioactive) - 'dpt14.004' => {CODE=>'dpt14', UNIT=>q{mol}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, - 'dpt14.005' => {CODE=>'dpt14', UNIT=>q{ }, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, # Amplitude - 'dpt14.006' => {CODE=>'dpt14', UNIT=>q{rad}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, - 'dpt14.007' => {CODE=>'dpt14', UNIT=>q{°}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, - 'dpt14.008' => {CODE=>'dpt14', UNIT=>q{Js}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, # Angular Momentum - 'dpt14.009' => {CODE=>'dpt14', UNIT=>q{rad/s}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, # Angular velocity - 'dpt14.010' => {CODE=>'dpt14', UNIT=>q{m²}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, - 'dpt14.011' => {CODE=>'dpt14', UNIT=>q{F}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, # capacitance - 'dpt14.012' => {CODE=>'dpt14', UNIT=>q{C/m²}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, # charge density surface - 'dpt14.013' => {CODE=>'dpt14', UNIT=>q{C/m³}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, # charge density volume - 'dpt14.014' => {CODE=>'dpt14', UNIT=>q{m²N-1}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, # compressibility - 'dpt14.015' => {CODE=>'dpt14', UNIT=>q{S}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, # conductance 1/Ohm - 'dpt14.016' => {CODE=>'dpt14', UNIT=>q{S/m}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, # electrical conductivity - 'dpt14.017' => {CODE=>'dpt14', UNIT=>q{kg/m²}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, # density - 'dpt14.018' => {CODE=>'dpt14', UNIT=>q{C}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, # electric charge - 'dpt14.019' => {CODE=>'dpt14', UNIT=>q{A}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, - 'dpt14.027' => {CODE=>'dpt14', UNIT=>q{V}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, - 'dpt14.033' => {CODE=>'dpt14', UNIT=>q{Hz}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, -# 'dpt14.038' => {CODE=>'dpt14', UNIT=>"\N{U+03A9}", PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, # OHM- unicode??? -# 'dpt14.038' => {CODE=>'dpt14', UNIT=>\x{03A9}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, # OHM - 'dpt14.038' => {CODE=>'dpt14', UNIT=>q{Ohm}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, # OHM - 'dpt14.039' => {CODE=>'dpt14', UNIT=>q{m}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, - 'dpt14.056' => {CODE=>'dpt14', UNIT=>q{W}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, - 'dpt14.057' => {CODE=>'dpt14', UNIT=>q{cosφ}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, - 'dpt14.068' => {CODE=>'dpt14', UNIT=>q{°C}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, - 'dpt14.076' => {CODE=>'dpt14', UNIT=>q{m³}, PATTERN=>qr/[-+]?(?:\d*[\.\,])?\d+/ixms, MIN=>undef, MAX=>undef}, + 'dpt14.000' => {CODE=>'dpt14', UNIT=>q{m/s²}, PATTERN=>qr/[+-]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, # acceleration superscr - = alt8315 + 'dpt14.001' => {CODE=>'dpt14', UNIT=>q{rad/s²}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, # acceleration angular + 'dpt14.002' => {CODE=>'dpt14', UNIT=>q{J/mol}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, # activation energy + 'dpt14.003' => {CODE=>'dpt14', UNIT=>q{1/s}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, # activity (radioactive) + 'dpt14.004' => {CODE=>'dpt14', UNIT=>q{mol}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, + 'dpt14.005' => {CODE=>'dpt14', UNIT=>q{ }, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, # Amplitude + 'dpt14.006' => {CODE=>'dpt14', UNIT=>q{rad}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, + 'dpt14.007' => {CODE=>'dpt14', UNIT=>q{°}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, + 'dpt14.008' => {CODE=>'dpt14', UNIT=>q{Js}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, # Angular Momentum + 'dpt14.009' => {CODE=>'dpt14', UNIT=>q{rad/s}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, # Angular velocity + 'dpt14.010' => {CODE=>'dpt14', UNIT=>q{m²}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, + 'dpt14.011' => {CODE=>'dpt14', UNIT=>q{F}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, # capacitance + 'dpt14.012' => {CODE=>'dpt14', UNIT=>q{C/m²}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, # charge density surface + 'dpt14.013' => {CODE=>'dpt14', UNIT=>q{C/m³}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, # charge density volume + 'dpt14.014' => {CODE=>'dpt14', UNIT=>q{m²N-1}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, # compressibility + 'dpt14.015' => {CODE=>'dpt14', UNIT=>q{S}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, # conductance 1/Ohm + 'dpt14.016' => {CODE=>'dpt14', UNIT=>q{S/m}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, # electrical conductivity + 'dpt14.017' => {CODE=>'dpt14', UNIT=>q{kg/m²}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, # density + 'dpt14.018' => {CODE=>'dpt14', UNIT=>q{C}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, # electric charge + 'dpt14.019' => {CODE=>'dpt14', UNIT=>q{A}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, + 'dpt14.027' => {CODE=>'dpt14', UNIT=>q{V}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, + 'dpt14.033' => {CODE=>'dpt14', UNIT=>q{Hz}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, + 'dpt14.038' => {CODE=>'dpt14', UNIT=>qq{\xCE\xA9}, ## no critic (ValuesAndExpressions::ProhibitEscapedCharacters) + PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, # OHM + 'dpt14.039' => {CODE=>'dpt14', UNIT=>q{m}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, + 'dpt14.056' => {CODE=>'dpt14', UNIT=>q{W}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, + 'dpt14.057' => {CODE=>'dpt14', UNIT=>q{cosφ}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, + 'dpt14.068' => {CODE=>'dpt14', UNIT=>q{°C}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, + 'dpt14.076' => {CODE=>'dpt14', UNIT=>q{m³}, PATTERN=>qr/[-+]?(?:\d+(?:[.]\d*)?(?:e[+-]?\d+)?)/xms, MIN=>-1.4e-45, MAX=>1.7e38}, # Access data - receive only 'dpt15' => {CODE=>'dpt15', UNIT=>q{}, PATTERN=>qr/noset/ixms, MIN=>undef, MAX=>undef, SETLIST=>'noset', @@ -710,7 +714,7 @@ sub KNX_Undef { return; } -#Places a "read" Message on the KNX-Bus +#send a "GroupValueRead" Message to the KNX-Bus #The answer is treated as regular telegram ############################# sub KNX_Get { @@ -755,6 +759,8 @@ sub KNX_Get { KNX_Log ($name, 5, qq{request value for GAD: $group GAD-NAME: $gadName}); + delete $hash->{'.noreplyflag'}->{$gadName}; # allow events for groupValueResponse when triggerd by fhem 9/2023 + IOWrite($hash, $KNXID, 'r' . $groupc); #send read-request to the bus if (defined($FW_wname)) { @@ -763,7 +769,7 @@ sub KNX_Get { return; } -#send Value to bus +#send a "GroupValueWrite" to bus ############################# sub KNX_Set { my ($hash, $name, $targetGadName, @arg) = @_; @@ -825,7 +831,7 @@ sub KNX_Set { $value = KNX_decodeByDpt($hash, $transval, $targetGadName) if ($model =~ m/^dpt(?:3|10|11|16|19)/ixms); #apply post processing for state and set all readings - KNX_SetReadings($hash, $targetGadName, $value, $rdName, undef); + KNX_SetReadings($hash, $targetGadName, $value, undef, undef); KNX_Log ($name, 5, 'exit'); return; @@ -1136,26 +1142,53 @@ sub KNX_Parse { my $getName = $deviceHash->{GADDETAILS}->{$gadName}->{RDNAMEGET}; - #handle write and reply messages + my $trigger = 1; # default create events +=pod + #GroupValueResponse messages when not triggered by read from fhem + if ($cmd =~ /[p]/ixms && exists($deviceHash->{'.noreplyflag'}->{$gadName})) { + my $nrts = $deviceHash->{'.noreplyflag'}->{$gadName}; + if (gettimeofday() > $nrts) { + delete $deviceHash->{'.noreplyflag'}->{$gadName}; + } + else { + KNX_Log ($deviceName, 1 ,qq{reply msg for $deviceName $gadName will not trigger events}); + # next; # ignore msg completly + $trigger = 0; + } + } +=cut + #handle GroupValueWrite and GroupValueResponse messages if ($cmd =~ /[w|p]/ixms) { #decode message my $transval = KNX_decodeByDpt ($deviceHash, $val, $gadName); #message invalid if (! defined($transval)) { - KNX_Log ($deviceName, 2, qq{readingName=$getName message=$msg could not be decoded} ); + KNX_Log ($deviceName, 2, qq{readingName=$getName message=$msg could not be decoded}); next; } KNX_Log ($deviceName, 4, qq{readingName=$getName value=$transval}); #apply post processing for state and set all readings - KNX_SetReadings($deviceHash, $gadName, $transval, $getName, $src); + KNX_SetReadings($deviceHash, $gadName, $transval, $src, $trigger); } - #handle read messages + #handle GroupValueRead messages elsif ($cmd =~ /[r]/ixms) { my $cmdAttr = AttrVal($deviceName, 'putCmd', undef); next if (! defined($cmdAttr) || $cmdAttr eq q{}); - +=pod + if ($cmdAttr eq 'noReply') { + if ($iohash->{PhyAddr} eq KNX_hexToName2($src)) { # match src-address with phy of IOdev + # from fhem - delete ignore reply flag + delete $deviceHash->{'.noreplyflag'}->{$gadName}; # allow when sent from fhem + } + else { + KNX_Log ($deviceName, 1, q{read msg from } . KNX_hexToName2($src) . qq{ for $deviceName $gadName IODev= $iohash->{PhyAddr}}); + $deviceHash->{'.noreplyflag'}->{$gadName} = gettimeofday() + 2; + } + next; # cannot use putCmd logic! + } +=cut # generate my $putName = $getName =~ s/get/put/irxms; $putName .= ($putName eq $getName)?q{-put}:q{}; # nosuffix @@ -1176,7 +1209,7 @@ sub KNX_Parse { readingsSingleUpdate($deviceHash, $putName, $value,0); IOWrite ($deviceHash, $KNXID, 'p' . $gadCode . $transval); } else { - KNX_Log ($deviceName, 2, qq{putCmd encoding failed for reading=$gadName - VALUE=$value}); + KNX_Log ($deviceName, 2, qq{putCmd encoding failed for gadName=$gadName - VALUE=$value}); } } #/process message @@ -1187,7 +1220,7 @@ sub KNX_Parse { ########## begin of private functions ########## ### KNX_autoCreate -# check wether we must do autocreate... +# check wether we have to do autocreate... # on entry: $iohash, $gadcode # on exit: return string for autocreate sub KNX_autoCreate { @@ -1209,16 +1242,11 @@ sub KNX_autoCreate { } ### KNX_SetReadings is called from KNX_Set and KNX_Parse -# calling param: $hash, $gadName, $value, $rdName, caller (set/parse) +# calling param: $hash, $gadName, $value, caller (set/parse), trigger (event yes/no) sub KNX_SetReadings { - my ($hash, $gadName, $value, $rdName, $src) = @_; - my $name = $hash->{NAME}; + my ($hash, $gadName, $value, $src, $trigger) = @_; -# $value *= 1 if (looks_like_number ($value)); # remove trailing zeros # changed 8/2023 -## my $model = $hash->{GADDETAILS}->{$gadName}->{MODEL}; -## if (looks_like_number($value) && $dpttypes{$model}->{CODE} !~ /^dpt(?:4|15|16|22|217|221|232|251|RAW)/ixms) { -## $value *= 1; # remove leading & trailing zeros # changed 8/2023 -## } + my $name = $hash->{NAME}; #append post-string, if supplied: format attr overrides supplied unit! my $model = $hash->{GADDETAILS}->{$gadName}->{MODEL}; @@ -1230,12 +1258,17 @@ sub KNX_SetReadings { $value .= q{ } . $unit; } + my $lsvalue = 'fhem'; # called from set + my $rdName = $hash->{GADDETAILS}->{$gadName}->{RDNAMESET}; + if (defined($src) && ($src ne q{})) { # called from parse + $lsvalue = KNX_hexToName2($src); + $rdName = $hash->{GADDETAILS}->{$gadName}->{RDNAMEGET}; + } + my $trievents = (defined($trigger))?$trigger:1; + #execute stateRegex my $state = KNX_replaceByRegex ($hash, $rdName, $value); - my $lsvalue = 'fhem'; # called from set - $lsvalue = KNX_hexToName2($src) if (defined($src) && ($src ne q{})); # called from parse - readingsBeginUpdate($hash); readingsBulkUpdate($hash, 'last-sender', $lsvalue); readingsBulkUpdate($hash, $rdName, $value); @@ -1258,7 +1291,7 @@ sub KNX_SetReadings { } readingsBulkUpdate($hash, 'state', $state); } - readingsEndUpdate($hash, 1); + readingsEndUpdate($hash, $trievents); return; } @@ -1292,7 +1325,7 @@ sub KNX_chkIODev { } return join(q{,}, @IOList2) if ($iocandidate eq 'undefined'); return $iocandidate . ' is not a valid IO-device or disabled/dummy for ' . qq{$name \n} . - 'Valid IO-devices are: ' . join(q{, }, @IOList2); + 'Valid IO-devices are: ' . join(q{, }, @IOList2); } ### delete all defptr entries for this device @@ -1389,7 +1422,8 @@ sub KNX_replaceByRegex { } else { #replace value $tempVal =~ s/$regPair[0]/$regPair[1]/gixms; - ($retVal = $tempVal) =~ s/[:]/ /xms; + $retVal = $tempVal =~ s/[:]/ /rxms; + $retVal =~ s/-\s/-/xms; # if $regpair[1] ends with - supress blank between word and value } last; } @@ -1415,7 +1449,6 @@ sub KNX_limit { my $offset = 0; $factor = $dpttypes{$model}->{FACTOR} if exists($dpttypes{$model}->{FACTOR}); $offset = $dpttypes{$model}->{OFFSET} if exists($dpttypes{$model}->{OFFSET}); - return $value if ($factor == 1 && $offset == 0); # shortcut #get limits my $min = $dpttypes{$model}->{MIN}; my $max = $dpttypes{$model}->{MAX}; @@ -1492,7 +1525,9 @@ sub KNX_encodeByDpt { KNX_Log ($name, 5, qq{gadName= $gadName value= $value model= $model pattern= $pattern}); my $lvalue = KNX_limit($hash, $value, $model, 'ENCODE'); - KNX_Log ($name, 4, qq{gadName= $gadName modified... Input= $value Output= $lvalue Model= $model}) if ($value ne $lvalue); + if ((looks_like_number($value)?$value * 1:$value) ne $lvalue) { # $value may have 3.0 apperance + KNX_Log ($name, 3, qq{gadName= $gadName modified by limits... Input= $value Output= $lvalue Model= $model}); + } if (ref($dpttypes{$code}->{ENC}) eq 'CODE') { my $hexval = $dpttypes{$code}->{ENC}->($lvalue, $model); @@ -1855,7 +1890,7 @@ sub dec_dpt14 { #4-Octet single precision float my $model = shift; my $hash = shift; $numval = KNX_limit ($hash, $numval, $model, 'DECODE'); - return sprintf ('%.3f', $numval); + return sprintf ('%.7g', $numval); } sub dec_dpt15 { #4-Octet Access data receive only @@ -1879,7 +1914,6 @@ sub dec_dpt16 { #14-Octet String or dpt4: single Char string #convert from latin-1 $state = encode ('utf8', decode('iso-8859-1',$state)) if ($model =~ m/^dpt(?:16.001|4.002)$/xms); $state = q{} if ($state =~ m/^[\x00]+$/ixms); # case all zeros received -# $state = q{} if ($state =~ m/^[\x00]/ixms); # case all zeros received $state =~ s/[\x00-\x1F]+//gxms; # remove non printable chars return $state; } @@ -2009,7 +2043,7 @@ sub main::KNX_scan { my $i = 0; #counter devices my $j = 0; #counter devices with get my $k = 0; #counter total get's - my $getsarr = q{}; + my $iohash; foreach my $knxdef (@devlist) { next unless $knxdef; @@ -2018,7 +2052,8 @@ sub main::KNX_scan { next if ((! defined($devhash)) || ($devhash->{TYPE} ne 'KNX')); #check if IO-device is ready - next if (KNX_chkIO($devhash->{IODev}->{NAME}) != 1); + $iohash = $devhash->{IODev}; + next if (KNX_chkIO($iohash) != 1); $i++; my $k0 = $k; #save previous number of get's @@ -2028,42 +2063,43 @@ sub main::KNX_scan { my $option = $devhash->{GADDETAILS}->{$key}->{OPTION}; next if (defined($option) && $option =~ /(?:set|listenonly)/ixms); $k++; - $getsarr .= $knxdef . q{ } . $key . q{,}; + push (@{$iohash->{Helper}->{knxscan}}, $knxdef, $key); } $j++ if ($k > $k0); } Log3 (undef, 3, qq{KNX_scan: $i devices selected (regex= $devs) / $j devices with get / $k "gets" executing...}); - doKNX_scan($getsarr) if ($k > 0); + doKNX_scan($iohash) if ($k > 0); return $k; } ### check if IODev is ready # retuns undef on not ready sub KNX_chkIO { - my $iodev = shift || return; + my $iohash = shift // return; - if ($defs{$iodev}->{TYPE} =~ /(?:KNXIO|FHEM2FHEM)/xms) { - return if ($defs{$iodev}->{STATE} ne 'connected'); + if ($iohash->{TYPE} =~ /(?:KNXIO|FHEM2FHEM)/xms) { + return if ($iohash->{STATE} ne 'connected'); } else { # all other IO-devs... - return if ($defs{$iodev}->{STATE} !~ /(?:initialized|opened|connected)/ixms); + return if ($iohash->{STATE} !~ /(?:initialized|opened|connected)/ixms); } return 1; } ### issue all get cmd's - each one delayed by InternalTimer sub doKNX_scan { - my ($devgad, $arr) = split(/,/xms,shift,2); + my $iohash = shift // return; - my ($name, $gadName) = split(/[\s]/xms,$devgad); - KNX_Get ($defs{$name}, $name, $gadName); - - if (defined($arr) && $arr ne q{}) { - my $count = split(/,/xms,$arr); # number of remainig pairs - my $delay = ($count % 10 == 0)?2:0.2; # extra delay on each 10th request - return InternalTimer(gettimeofday() + $delay,\&doKNX_scan,$arr); # does not support array-> use string... + my $count = scalar(@{$iohash->{Helper}->{knxscan}}); # / 2 + if ($count > 0 ) { + my $devName = shift(@{$iohash->{Helper}->{knxscan}}); + my $gadName = shift(@{$iohash->{Helper}->{knxscan}}); + KNX_Get ($defs{$devName}, $devName, $gadName); + my $delay = ($count % 20 == 0)?2:0.3; # extra delay on each 10th request + return InternalTimer(gettimeofday() + $delay,\&doKNX_scan,$iohash); } - Log3 (undef, 3, q{KNX_scan: finished}); + delete $iohash->{Helper}->{knxscan}; + Log3 ($iohash, 3, q{KNX_scan: finished}); return; } @@ -2424,29 +2460,29 @@ Examples:
  • dpt8.010 -32768..32767 %
  • dpt8.011 -32768..32767 °
  • dpt8.012 -32768..32767 m
    • -
  • dpt9 -670760.0..+670433.28
    • -
  • dpt9.001 -274.0..+670433.28 °C
    • -
  • dpt9.002 -670760.0..+670433.28 K
    • -
  • dpt9.003 -670760.0..+670433.28 K/h
    • -
  • dpt9.004 -670760.0..+670433.28 lux
    • -
  • dpt9.005 -670760.0..+670433.28 m/s
    • -
  • dpt9.006 -670760.0..+670433.28 Pa
    • -
  • dpt9.007 -670760.0..+670433.28 %
    • -
  • dpt9.008 -670760.0..+670433.28 ppm
    • -
  • dpt9.009 -670760.0..+670433.28 m³/h
    • -
  • dpt9.010 -670760.0..+670433.28 s
    • -
  • dpt9.011 -670760.0..+670433.28 ms
    • -
  • dpt9.020 -670760.0..+670433.28 mV
    • -
  • dpt9.021 -670760.0..+670433.28 mA
    • -
  • dpt9.022 -670760.0..+670433.28 W/m²
    • -
  • dpt9.023 -670760.0..+670433.28 K/%
    • -
  • dpt9.024 -670760.0..+670433.28 kW
    • -
  • dpt9.025 -670760.0..+670433.28 l/h
    • -
  • dpt9.026 -670760.0..+670433.28 l/h
    • +
  • dpt9 -671088.64..+670433.28
    • +
  • dpt9.001 -273.15..+670433.28 °C
    • +
  • dpt9.002 -671088.64..+670433.28 K
    • +
  • dpt9.003 -671088.64..+670433.28 K/h
    • +
  • dpt9.004 0..+670433.28 lux
    • +
  • dpt9.005 0..+670433.28 m/s
    • +
  • dpt9.006 0..+670433.28 Pa
    • +
  • dpt9.007 0..+670433.28 %
    • +
  • dpt9.008 0..+670433.28 ppm
    • +
  • dpt9.009 -671088.64..+670433.28 m³/h
    • +
  • dpt9.010 -671088.64..+670433.28 s
    • +
  • dpt9.011 -671088.64..+670433.28 ms
    • +
  • dpt9.020 -671088.64..+670433.28 mV
    • +
  • dpt9.021 -671088.64..+670433.28 mA
    • +
  • dpt9.022 -671088.64..+670433.28 W/m²
    • +
  • dpt9.023 -671088.64..+670433.28 K/%
    • +
  • dpt9.024 -671088.64..+670433.28 kW
    • +
  • dpt9.025 -671088.64..+670433.28 l/h
    • +
  • dpt9.026 -671088.64..+670433.28 l/h
  • dpt9.027 -459.6..+670433.28 °F
    • -
  • dpt9.028 -670760.0..+670433.28 km/h
    • -
  • dpt9.029 -670760.0..+670433.28 g/m³
    • -
  • dpt9.030 -670760.0..+670433.28 μg/m³
    • +
  • dpt9.028 0..+670433.28 km/h
    • +
  • dpt9.029 0..+670433.28 g/m³
    • +
  • dpt9.030 0..+670433.28 μg/m³
  • dpt10 HH:MM:SS (Time)
  • dpt11 DD.MM.YYYY (Date)
  • dpt12 0..+4294967295
    • @@ -2465,35 +2501,35 @@ Examples:
  • dpt13.015 -2147483648..2147483647 kVARh
  • dpt13.016 -2147483648..2147483647 MWh
  • dpt13.100 -2147483648..2147483647 s
    • -
  • dpt14 -1.17e-38..+3.4e+38 (IEE754 floatingPoint)
    • -
  • dpt14.000 -1.17e-38..+3.4e+38 m/s²
    • -
  • dpt14.001 -1.17e-38..+3.4e+38 rad/s²
    • -
  • dpt14.002 -1.17e-38..+3.4e+38 J/mol
    • -
  • dpt14.003 -1.17e-38..+3.4e+38 1/s
    • -
  • dpt14.004 -1.17e-38..+3.4e+38 mol
    • -
  • dpt14.005 -1.17e-38..+3.4e+38 -
    • -
  • dpt14.006 -1.17e-38..+3.4e+38 rad
    • -
  • dpt14.007 -1.17e-38..+3.4e+38 °
    • -
  • dpt14.008 -1.17e-38..+3.4e+38 Js
    • -
  • dpt14.009 -1.17e-38..+3.4e+38 rad/s
    • -
  • dpt14.010 -1.17e-38..+3.4e+38 m²
    • -
  • dpt14.011 -1.17e-38..+3.4e+38 F
    • -
  • dpt14.012 -1.17e-38..+3.4e+38 C/m²
    • -
  • dpt14.013 -1.17e-38..+3.4e+38 C/m³
    • -
  • dpt14.014 -1.17e-38..+3.4e+38 m²N-1
    • -
  • dpt14.015 -1.17e-38..+3.4e+38 S
    • -
  • dpt14.016 -1.17e-38..+3.4e+38 S/m
    • -
  • dpt14.017 -1.17e-38..+3.4e+38 kg/m³
    • -
  • dpt14.018 -1.17e-38..+3.4e+38 C
    • -
  • dpt14.019 -1.17e-38..+3.4e+38 A
    • -
  • dpt14.027 -1.17e-38..+3.4e+38 V
    • -
  • dpt14.033 -1.17e-38..+3.4e+38 Hz
    • -
  • dpt14.038 -1.17e-38..+3.4e+38 Ω
    • -
  • dpt14.039 -1.17e-38..+3.4e+38 m
    • -
  • dpt14.056 -1.17e-38..+3.4e+38 W
    • -
  • dpt14.057 -1.17e-38..+3.4e+38 cosφ
    • -
  • dpt14.068 -1.17e-38..+3.4e+38 °C
    • -
  • dpt14.076 -1.17e-38..+3.4e+38 m³
    • +
  • dpt14 -1.4e-45..+1.7e+38 (IEE754 floatingPoint)
    • +
  • dpt14.000 -1.4e-45..+1.7e+38 m/s²
    • +
  • dpt14.001 -1.4e-45..+1.7e+38 rad/s²
    • +
  • dpt14.002 -1.4e-45..+1.7e+38 J/mol
    • +
  • dpt14.003 -1.4e-45..+1.7e+38 1/s
    • +
  • dpt14.004 -1.4e-45..+1.7e+38 mol
    • +
  • dpt14.005 -1.4e-45..+1.7e+38 -
    • +
  • dpt14.006 -1.4e-45..+1.7e+38 rad
    • +
  • dpt14.007 -1.4e-45..+1.7e+38 °
    • +
  • dpt14.008 -1.4e-45..+1.7e+38 Js
    • +
  • dpt14.009 -1.4e-45..+1.7e+38 rad/s
    • +
  • dpt14.010 -1.4e-45..+1.7e+38 m²
    • +
  • dpt14.011 -1.4e-45..+1.7e+38 F
    • +
  • dpt14.012 -1.4e-45..+1.7e+38 C/m²
    • +
  • dpt14.013 -1.4e-45..+1.7e+38 C/m³
    • +
  • dpt14.014 -1.4e-45..+1.7e+38 m²N-1
    • +
  • dpt14.015 -1.4e-45..+1.7e+38 S
    • +
  • dpt14.016 -1.4e-45..+1.7e+38 S/m
    • +
  • dpt14.017 -1.4e-45..+1.7e+38 kg/m³
    • +
  • dpt14.018 -1.4e-45..+1.7e+38 C
    • +
  • dpt14.019 -1.4e-45..+1.7e+38 A
    • +
  • dpt14.027 -1.4e-45..+1.7e+38 V
    • +
  • dpt14.033 -1.4e-45..+1.7e+38 Hz
    • +
  • dpt14.038 -1.4e-45..+1.7e+38 Ω
    • +
  • dpt14.039 -1.4e-45..+1.7e+38 m
    • +
  • dpt14.056 -1.4e-45..+1.7e+38 W
    • +
  • dpt14.057 -1.4e-45..+1.7e+38 cosφ
    • +
  • dpt14.068 -1.4e-45..+1.7e+38 °C
    • +
  • dpt14.076 -1.4e-45..+1.7e+38 m³
  • dpt15.000 Access-code (readonly)
  • dpt16 14 char ASCII string
  • dpt16.000 14 char ASCII string