# $Id: 98_Siro.pm 16472 2018-03-23 15:03:57Z Byte09 $ # ################################################################################################################ # Todo's: # - # - ############################################################################################################### package main; use strict; use warnings; my $version = "V 1"; sub Siro_Initialize($) { my ($hash) = @_; $hash->{SetFn} = "FHEM::Siro::Set"; $hash->{NotifyFn} = "FHEM::Siro::Notify"; $hash->{ShutdownFn} = "FHEM::Siro::Shutdown"; $hash->{FW_deviceOverview} = 1; $hash->{FW_detailFn} = "FHEM::Siro::fhemwebFn"; $hash->{DefFn} = "FHEM::Siro::Define"; $hash->{UndefFn} = "FHEM::Siro::Undef"; $hash->{DeleteFn} = "FHEM::Siro::Delete"; $hash->{ParseFn} = "FHEM::Siro::Parse"; $hash->{AttrFn} = "FHEM::Siro::Attr"; $hash->{Match} = "^P72#[A-Fa-f0-9]+"; $hash->{AsyncOutput} = "FHEM::Siro::AsyncOutput"; $hash->{AttrList} = " IODev" . " disable:0,1" . " SIRO_signalRepeats:1,2,3,4,5,6,7,8,9" . " SIRO_inversPosition:0,1" . " SIRO_Battery_low" . " SIRO_signalLongStopRepeats:10,15,20,40,45,50" . " $readingFnAttributes" . " SIRO_channel:1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" . " SIRO_time_to_open" . " SIRO_time_to_close" . " SIRO_debug:0,1" #oldversion entfernen mit kommender version . " SignalRepeats:1,2,3,4,5,6,7,8,9" . " SignalLongStopRepeats:10,15,20,40,45,50" . " channel_send_mode_1:1,2,3,4,5,6,7,8,9,10,11,12,13,14,15" . " $readingFnAttributes" . " setList" . " ignore:0,1" . " dummy:1,0" . " time_to_open" . " time_to_close" . " time_down_to_favorite" . " hash" . " operation_mode:0,1" . " debug_mode:0,1" . " down_limit_mode_1:slider,0,1,100" . " down_auto_stop:slider,0,1,100" . " invers_position:0,1" . " prog_fav_sequence"; $hash->{AutoCreate} = { "Siro.*" => { ATTR => "event-min-interval:.*:300 event-on-change-reading:.*", FILTER => "%NAME", autocreateThreshold => "2:10" } }; $hash->{NOTIFYDEV} = "global"; FHEM::Siro::LoadHelper($hash) if ($init_done); } ################################################################# #### arbeiten mit packages package FHEM::Siro; use strict; use warnings; use GPUtils qw(GP_Import) ; # wird fuer den Import der FHEM Funktionen aus der fhem.pl ben?tigt ## Import der FHEM Funktionen BEGIN { GP_Import( qw(readingsSingleUpdate readingsBeginUpdate readingsEndUpdate readingsBulkUpdate defs modules Log3 AttrVal ReadingsVal IsDisabled gettimeofday InternalTimer RemoveInternalTimer AssignIoPort IOWrite ReadingsNum CommandAttr attr fhem ) ); } my %codes = ( "55" => "stop", # Stop the current movement or move to custom position "11" => "off", # Move "up" "33" => "on", # Move "down" "CC" => "prog", # Programming-Mode (Remote-control-key: P2) ); my %sets = ( "open" => "noArg", "close" => "noArg", "up" => "noArg", "down" => "noArg", "off" => "noArg", "stop" => "noArg", "on" => "noArg", "fav" => "noArg", "prog" => "noArg", "sequenz" => "noArg", "prog_mode_on" => "noArg", "prog_mode_off" => "noArg", "reset_motor_term" => "noArg", "pct" => "slider,0,1,100", # Wird nur bei vorhandenen time_to attributen gesetzt "state" => "noArg", "set_favorite" => "noArg", "del_favorite" => "only_modul,only_shutter,shutter_and_modul", "down_for_timer" => "textField", "up_for_timer" => "textField" ); my %sendCommands = ( "pct" => "level", "level" => "level", "stop" => "stop", "off" => "off", "on" => "on", "open" => "off", "close" => "on", "up" => "off", "down" => "on", "fav" => "fav", "prog" => "prog", "reset_motor_term" => "reset_motor_term", "up_for_timer" => "upfortimer", "down_for_timer" => "downfortimer" ); my %siro_c2b; # Map commands from web interface to codes used in Siro foreach my $k ( keys %codes ) { $siro_c2b{ $codes{$k} } = $k; } ###################### sub Attr(@) { my ( $cmd, $name, $aName, $aVal ) = @_; my $hash = $defs{$name}; return "\"Siro Attr: \" $name does not exist" if ( !defined($hash) ); return; } ################################################################# sub Define($$) { my ( $hash, $def ) = @_; my @a = split( "[ \t][ \t]*", $def ); my $u = "Wrong syntax: define Siro id "; my $askedchannel; # Angefragter kanal # Fail early and display syntax help if ( int(@a) < 3 ) { return $u; } if ( $a[2] =~ m/^[A-Fa-f0-9]{8}$/i ) { $hash->{ID} = uc( substr( $a[2], 0, 7 ) ); $hash->{CHANNEL} = sprintf( "%d", hex( substr( $a[2], 7, 1 ) ) ); $askedchannel = sprintf( "%d", hex( substr( $a[2], 7, 1 ) ) ); } else { return "Define $a[0]: wrong address format: specify a 8 char hex value (id=7 chars, channel=1 char) . Example A23B7C51. The last hexchar identifies the channel. -> ID=A23B7C5, Channel=1. "; } $hash->{Version} = $version; my $name = $a[0]; my $code = uc( $a[2] ); my $ncode = 1; my $devpointer = $hash->{ID} . $hash->{CHANNEL}; $hash->{CODE}{ $ncode++ } = $code; $modules{Siro}{defptr}{$devpointer} = $hash; AssignIoPort($hash); CommandAttr( undef,$name . ' devStateIcon {if (ReadingsVal( $name, \'state\', \'undef\' ) =~ m/[a-z]/ ) { return \'programming:edit_settings notAvaible:hue_room_garage runningUp.*:fts_shutter_up runningDown.*:fts_shutter_down\'}else{return \'[0-9]{1,3}:fts_shutter_1w_\'.(int($state/10)*10)}}' ) if ( AttrVal($name,'devStateIcon','none') eq 'none' ); CommandAttr(undef,$name . ' webCmd stop:open:close:fav:pct') if ( AttrVal($name,'webCmd','none') eq 'none' ); Log3( $name, 5, "Siro_define: angelegtes Device - code -> $code name -> $name hash -> $hash " ); } ################################################################# sub Undef($$) { my ( $hash, $name ) = @_; delete( $modules{Siro}{defptr}{$hash} ); return undef; } ################################################################# sub Shutdown($) { my ($hash) = @_; my $name = $hash->{NAME}; return; } ################################################################# sub LoadHelper($) { my ($hash) = @_; my $name = $hash->{NAME}; return; } ################################################################# sub Notify($$) { return; } ################################################################# sub Delete($$) { my ( $hash, $name ) = @_; return undef; } ################################################################# sub SendCommand($@) { my ( $hash, @args ) = @_; my $ret = undef; my $cmd = $args[0]; # Command as text (on, off, stop, prog) my $message; # IO-Message (full) my $chan; # Channel my $binChannel; # Binary channel my $SignalRepeats; # my $name = $hash->{NAME}; my $binHash; my $bin; # Full binary IO-Message my $binCommand; my $numberOfArgs = int(@args); my $command = $siro_c2b{$cmd}; my $io = $hash->{IODev}; # IO-Device (SIGNALduino) if ( $hash->{helper}{exexcmd} eq "off") # send kommand blockiert / keine ausf?hrung { Log3( $name, 5,"Siro_sendCommand: ausf?hrung durch helper blockiert "); return; } Log3( $name, 5,"Siro_sendCommand: args2 - $args[1]"); if ( $args[1] eq "longstop" || $hash->{helper}{progmode} eq "on") { $SignalRepeats = AttrVal( $name, 'SIRO_SignalLongStopRepeats', '15' ); } else { $SignalRepeats = AttrVal( $name, 'SIRO_signalRepeats', '10' ); } $chan = AttrVal( $name, 'SIRO_channel', undef ); if ( !defined($chan) ) { $chan = $hash->{CHANNEL}; } $binChannel = sprintf( "%04b", $chan ); my $value = $name . " " . join( " ", @args ); $binHash = sprintf( "%028b", hex( $hash->{ID} ) ); Log3 $io, 5, "Siro_sendCommand: BinHash: = $binHash"; $binCommand = sprintf( "%08b", hex($command) ); Log3 $io, 5, "Siro_sendCommand: BinCommand: = $binCommand"; $bin = $binHash . $binChannel . $binCommand; # Binary code to send Log3 $io, 5, "Siro_sendCommand: Siro set value = $value"; $message = 'P72#' . $bin . '#R' . $SignalRepeats; IOWrite( $hash, 'sendMsg', $message ) if AttrVal( $name, 'SIRO_debug', "0" ) ne "1"; Log3( $name, 5, "Siro_sendCommand: name -> $name command -> $cmd channel -> $chan bincmd -> $binCommand bin -> $bin message -> $message"); return $ret; } ################################################################# sub Parse($$) { my @args; my ( $hash, $msg ) = @_; my $doubelmsgtime = 2; # zeit in sek in der doppelte nachrichten blockiert werden my $favcheck = $doubelmsgtime +1;# zeit in der ein zweiter stop kommen muss/darf für fav my $testid = substr( $msg, 4, 8 ); my $testcmd = substr( $msg, 12, 2 ); my $timediff; my $name = $hash->{NAME}; return "" if ( IsDisabled($name) ); if ($hash->{helper}{progmode} eq "on") { Log3( $name, 5, "Siro Parse deactivated cause off programmingmode"); return; } if ( my $lh = $modules{Siro}{defptr}{$testid} ) { my $name = $lh->{NAME}; Log3 $hash, 5,"Siro_Parse: Incomming msg from IODevice $testid - $name device is defined"; if ( defined($name)&& $testcmd ne "54")# prüfe auf doppele msg falls gerät vorhanden und cmd nicht stop { Log3 $lh, 5,"Siro_Parse: Incomming msg $msg from IODevice name/DEF $testid - Hash -> $lh"; my $testparsetime = gettimeofday(); my $lastparse = $lh->{helper}{lastparse}; my @lastparsearray = split( / /, $lastparse ); if ( !defined( $lastparsearray[1] ) ) { $lastparsearray[1] = 0 } if ( !defined( $lastparsearray[0] ) ) { $lastparsearray[0] = "" } $timediff = $testparsetime - $lastparsearray[1]; my $abort = "false"; Log3 $lh, 5, "Siro_Parse: test doublemsg "; Log3 $lh, 5, "Siro_Parse: lastparsearray[0] -> $lastparsearray[0] "; Log3 $lh, 5, "Siro_Parse: lastparsearray[1] -> $lastparsearray[1] "; Log3 $lh, 5, "Siro_Parse: testparsetime -> $testparsetime "; Log3 $lh, 5, "Siro_Parse: timediff -> $timediff "; if ( $msg eq $lastparsearray[0] ) { if ( $timediff < $doubelmsgtime ) { $abort = "true"; } } $lh->{helper}{lastparse} = "$msg $testparsetime"; if ( $abort eq "true" ) { Log3 $lh, 4, "Siro_Parse: aborted , doublemsg "; return $name; } Log3 $lh, 4, "Siro_Parse: not aborted , no doublemsg "; } my ( undef, $rawData ) = split( "#", $msg ); my $hlen = length($rawData); my $blen = $hlen * 4; my $bitData = unpack( "B$blen", pack( "H$hlen", $rawData ) ); Log3 $hash, 5, "Siro_Parse: msg = $rawData length: $msg"; Log3 $hash, 5, "Siro_Parse: rawData = $rawData length: $hlen"; Log3 $hash, 5, "Siro_Parse: converted to bits: $bitData"; my $id = substr( $rawData, 0, 7 ); # The first 7 hexcodes are the ID my $BitChannel = substr( $bitData, 28, 4 ); # Not needed atm my $channel = sprintf( "%d", hex( substr( $rawData, 7, 1 ) ) );# The last hexcode-char defines the channel my $channelhex = substr( $rawData, 7, 1 ); # tmp my $cmd = sprintf( "%d", hex( substr( $rawData, 8, 1 ) ) ); my $newstate = $codes{ $cmd . $cmd }; # Set new state my $deviceCode = $id. $channelhex;#Tmp change channel -> channelhex. The device-code is a combination of id and channel Log3 $hash, 5, "Siro_Parse: device ID: $id"; Log3 $hash, 5, "Siro_Parse: Channel: $channel"; Log3 $hash, 5, "Siro_Parse: Cmd: $cmd Newstate: $newstate"; Log3 $hash, 5, "Siro_Parse: deviceCode: $deviceCode"; if ( defined($name)&& $testcmd eq "54" )#prüfe auf doppele msg falls gerät vorhanden und cmd stop { # Log3 $lh, 5, "Siro_Parse: prüfung auf douplestop "; my $testparsetime = gettimeofday(); my $lastparsestop = $lh->{helper}{lastparse_stop}; my $parseaborted = $lh->{helper}{parse_aborted}; my @lastparsestoparray = split( / /, $lastparsestop ); my $timediff = $testparsetime - $lastparsestoparray[1]; my $abort = "false"; $parseaborted = 0 if ( !defined($parseaborted) ); Log3 $lh, 5, "Siro_Parse: test doublestop "; Log3 $lh, 5, "Siro_Parse: lastparsearray[0] -> $lastparsestoparray[0] "; Log3 $lh, 5, "Siro_Parse: lastparsearray[1] -> $lastparsestoparray[1] "; Log3 $lh, 5, "Siro_Parse: testparsetime -> $testparsetime "; Log3 $lh, 5, "Siro_Parse: timediff -> $timediff "; Log3 $lh, 5, "Siro_Parse: parseaborted -> $parseaborted "; if ( $newstate eq $lastparsestoparray[0] ) { if ( $timediff < 3 ) { $abort = "true"; $parseaborted++; } } if ( $abort eq "true" && $parseaborted < 8 ) { $lh->{helper}{parse_aborted} = $parseaborted; Log3 $lh, 5, "Siro_Parse: aborted , doublestop "; return $name; } $lh->{helper}{lastparse_stop} = "$newstate $testparsetime"; if ( $parseaborted >= 7 ) { $parseaborted = 0; $lh->{helper}{parse_aborted} = $parseaborted; $testparsetime = gettimeofday(); $lh->{helper}{lastparse_stop} = "$newstate $testparsetime"; if ( $newstate eq "stop" ) { Log3 $lh, 3, "Siro_Parse: double_msg signal_favoritenanfahrt erkannt "; $newstate = "fav"; $args[0] = "fav"; } } } Log3( $name, 5, "Siro Parse Befehl: $newstate"); if ( defined($name) ) {#device vorhanden my $parseaborted = 0; $lh->{helper}{parse_aborted} = $parseaborted; Log3 $lh, 5, "Siro_Parse: $name $newstate"; $hash->{helper}{remotecmd} = "on"; #verhindert das senden von signalen Set( $lh, $name, $newstate ); return $name; } } else { # device nicht vorhanden my ( undef, $rawData ) = split( "#", $msg ); my $hlen = length($rawData); my $blen = $hlen * 4; my $bitData = unpack( "B$blen", pack( "H$hlen", $rawData ) ); Log3 $hash, 5, "Siro_Parse: msg = $rawData length: $msg"; Log3 $hash, 5, "Siro_Parse: rawData = $rawData length: $hlen"; Log3 $hash, 5, "Siro_Parse: converted to bits: $bitData"; my $id = substr( $rawData, 0, 7 ); # The first 7 hexcodes are the ID my $BitChannel = substr( $bitData, 28, 4 ); # Not needed atm my $channel = sprintf( "%d", hex( substr( $rawData, 7, 1 ) ) ); # The last hexcode-char defines the channel my $channelhex = substr( $rawData, 7, 1 ); # tmp my $cmd = sprintf( "%d", hex( substr( $rawData, 8, 1 ) ) ); my $newstate = $codes{ $cmd . $cmd }; # Set new state my $deviceCode = $id. $channelhex; # Tmp change channel -> channelhex. The device-code is a combination of id and channel Log3 $hash, 5, "Siro_Parse: device ID: $id"; Log3 $hash, 5, "Siro_Parse: Channel: $channel"; Log3 $hash, 5, "Siro_Parse: Cmd: $cmd Newstate: $newstate"; Log3 $hash, 5, "Siro_Parse: deviceCode: $deviceCode"; Log3 $hash, 2, "Siro unknown device $deviceCode, please define it"; return "UNDEFINED Siro_$deviceCode Siro $deviceCode"; } } ############################################################# # Call with hash, name, virtual/send, set-args sub Set($@) { my $testtimestart = gettimeofday(); my $debug; my ( $hash, $name, @args ) = @_; my $cmd = $args[0]; # eingehendes set my $zielposition = $args[1]; # eingehendes set position Log3( $name, 5, "Siro - Set: eingehendes komando $cmd") if $cmd ne "?"; ### check for old version if (ReadingsVal( $name, 'last_reset_os', 'undef' ) ne 'undef') { Log3( $name,0 , "Da Siromodul wurde geändert und die einstellungen sind nicht mehr Kompatibel. Bitte das Sirodevice \"$name\" kontrollieren ."); } ################## my $actiontime = time; # zeit dieses Aufrufes my $lastactiontime = ReadingsVal( $name, 'ActionTime', $actiontime ); # Zeit des letzten Aufrufes my $betweentime = $actiontime-$lastactiontime; # Zeit zwischen aktuellem und letztem Aufruf my $downtime = AttrVal( $name, 'SIRO_time_to_close','undef' ); # fahrdauer runter my $uptime = AttrVal( $name, 'SIRO_time_to_open','undef' ); # fahrdauer hoch my $down1time ="undef"; # fahrzeit 1 prozent my $up1time ="undef"; # fahrzeit 1 prozent my $drivingtime; # fahrzeit bei positionsanfahrt my $aktendaction = ReadingsVal( $name, 'aktEndAction', '0' ); #endzeit laufende avtion my $akttimeaction = ReadingsVal( $name, 'aktTimeAction', '0' ); #dauer einer laufenden aktion my $aktrunningaction = ReadingsVal( $name, 'aktRunningAction', '' ); #typ einer laufenden aktion my $position = ReadingsVal( $name, 'pct', '' ); #position pct bis zum ende einer aktion my $state = ReadingsVal( $name, 'state', 'undef' ); #aktuelle aktion ( runningDown/runningUp ) my $drivedpercents; # beinhaltet gefahrene prozent bei aktionswechsel my $newposition ; # beinhaltet neue positin bei aktionswechsel my $favposition = ReadingsVal( $name, 'Favorite-Position', 'nA' ); #gespeicherte Favoritenposition my $invers = 1; #invertiert position if ($downtime ne "undef" && $uptime ne "undef") { $down1time = $downtime/100; $up1time = $uptime/100; } return "" if ( IsDisabled($name) ); # versionschange #changeconfig if ( $cmd eq 'changeconfig'){ versionchange( $name ); return; } # pr?fe auf unbekannte sets if ( $cmd =~ m/^exec.*/ )# empfangene sequenz aus programmiermode { $args[1] = $cmd; $cmd = "sequenz"; } if ( !exists( $sets{$cmd} ) ) { my @cList; my $atts = AttrVal( $name, 'setList', "" ); my %setlist = split( "[: ][ ]*", $atts ); foreach my $k ( sort keys %sets ) { my $opts = undef; $opts = $sets{$k}; $opts = $setlist{$k} if ( exists( $setlist{$k} ) ); if ( defined($opts) ) { push( @cList, $k . ':' . $opts ); } else { push( @cList, $k ); } } # end foreach return "Unknown argument $cmd, choose one of " . join( " ", @cList ); } #################################### # programmiermodus #################################### if ( $hash->{helper}{progmode} eq "on" && $cmd eq "sequenz") # sequenz ausführen { Log3( $name, 5, "programmiermodus sequenz gefunden :$args[1]"); my @seq = split(/,/, $args[1]); shift @seq; my $exectime = time; foreach my $seqpart (@seq) { #$actiontime $exectime = $exectime+2; my $execcmd = $seqpart; Log3( $name, 5, "Siro programmin sequenz : $exectime - $execcmd"); InternalTimer( $exectime, "FHEM::Siro::Prog", $name." ".$execcmd ); } return; } if ($cmd eq "prog_mode_on" && $hash->{helper}{progmode} ne "on") { readingsSingleUpdate( $hash, "state", 'programming', 1 ); $hash->{helper}{progmode} = "on"; } if ($cmd eq "prog_mode_off" && $hash->{helper}{progmode} eq "on") { readingsSingleUpdate( $hash, "state", $position, 1 ); delete( $hash->{helper}{progmode} ); } if ($hash->{helper}{progmode} eq "on") { SendCommand( $hash, $sendCommands{$cmd} ); delete( $hash->{Signalduino_RAWMSG} ); delete( $hash->{Signalduino_MSGCNT} ); delete( $hash->{Signalduino_RSSI} ); delete( $hash->{Signalduino_TIME} ); Log3( $name, 5, "Siro Parse deactivated cause off programmingmode"); return; } #################################### if ($state eq "programming") # keine Befehlsausf?hrung w?hrend einer programmierung { Log3( $name, 1, "Siro - Befehl nicht moeglich , Device im Programmiermodus"); return; } # setze actiontime und lastactiontime # umbauen zu bulk update RemoveInternalTimer($name); #alle vorhandenen timer l?schen delete( $hash->{helper}{exexcmd} ); # on/off off blockiert befehlsausf?hrung / l?schen vor jedem durchgang #setze helper neu wenn signal von fb kommt if ($hash->{helper}{remotecmd} eq "on") { $hash->{helper}{exexcmd} = "off" } delete( $hash->{helper}{remotecmd} ); readingsBeginUpdate($hash); readingsBulkUpdate( $hash, "ActionTime", $actiontime, 0 ); readingsBulkUpdate( $hash, "LastActionTime", $lastactiontime, 0 ); readingsBulkUpdate( $hash, "BetweentActionTime", $betweentime, 0 ); readingsEndUpdate($hash, 1); # befehl aus %sendCommands ermitteln my $comand = $sendCommands{$cmd}; # auzuf?hrender befehl Log3( $name, 5, "Siro - Set: ermittelter Befehl: $comand " ); # set reset_motor_term reset_motor_term if ($comand eq "reset_motor_term") { readingsSingleUpdate( $hash, "motor-term", "0", 1 ) ; readingsSingleUpdate( $hash, "batteryState", "unknown", 1 ) ; return; } # pr?fe auf laufende aktion nur bei definierten laufzeiten # wenn vorhanden neuberechnung aller readings if ($aktendaction > time && ($downtime ne "undef" || $uptime ne "undef")) { Log3( $name, 5, "Siro - Set: laufende aktion gefunden - abbruch"); Log3( $name, 5, "Siro - Set: laufende aktion -"); #aktTimeAction - dauer der laufenden aktion - in variable $akttimeaction #aktEndAction geplantes aktionsende - in variabel $aktendaction #$actiontime aktuelle zeit #$aktrunningaction - typ der laufenden aktion #$position -position bei actionsbeginn my $pastaction = $akttimeaction - ($aktendaction - $actiontime); Log3( $name, 5, "Siro - Set: unterbrochene aktion $state lief $pastaction "); Log3( $name, 5, "Siro - Set: aktionsbeginn bei $position "); if ($state eq "runningDown" || $state eq "runningDownfortimer") { $drivedpercents = $pastaction/$down1time; $drivedpercents = ( int( $drivedpercents * 10 ) / 10 ); Log3( $name, 5, "Siro - Set: positionsver?nderung um $drivedpercents prozent nach unten "); $newposition = int ($position+$drivedpercents); } if ($state eq "runningUp" || $state eq "runningUpfortimer") { $drivedpercents = $pastaction/$up1time; $drivedpercents = ( int( $drivedpercents * 10 ) / 10 ); Log3( $name, 5, "Siro - Set: positionsver?nderung um $drivedpercents prozent nach oben "); $newposition = int ($position-$drivedpercents); } Log3( $name, 5, "Siro - Set: newposition - $newposition "); my $operationtime = ReadingsNum( $name, 'motor-term', 0 ); my $newoperationtime = $operationtime + $pastaction; readingsBeginUpdate($hash); readingsBulkUpdate( $hash, "state", $newposition ) ; readingsBulkUpdate( $hash, "pct", $newposition ) ; readingsBulkUpdate( $hash, "aktRunningAction", "noAction" ) ; readingsBulkUpdate( $hash, "aktEndAction", 0 ) ; readingsBulkUpdate( $hash, "aktTimeAction", 0 ) ; readingsBulkUpdate( $hash, "aktActionFinish", 0 ) ; readingsBulkUpdate( $hash, "motor-term", $newoperationtime, 1 ) ; readingsEndUpdate($hash, 1); if ($comand ne "stop") #wenn anders kommando als stop befehl zwischenspeichern und per internal timer neu aufrufen , vorher fahrt stoppen per befehl. Stopbefehl l?uft durch wegen notbetrieb ohne timer attribute, gespeicherter befehl wir abgelegt in reading ($cmd) helper/cmd1 und ($zielposition) helper/cmd2. bei aufruf set wird auf vorhandensein gepr?ft. { SendCommand( $hash, 'stop' ); Log3( $name, 5, "Siro - Set: zwischenspeichern von cmd ($cmd) und position ($zielposition)"); $hash->{helper}{savedcmds}{cmd1} = $cmd; $hash->{helper}{savedcmds}{cmd2} = $zielposition if defined $zielposition; InternalTimer( time, "FHEM::Siro::Restartset", "$name" ); return; } } ############## on off for timer # up/down for timer mappen auf on/off und timer für stop setzen if ( $comand eq 'upfortimer' ) { Log3( $name, 5, "Siro_Set: up_for_timer @args $args[1]" ); $hash->{helper}{savedcmds}{cmd1} = 'stop'; InternalTimer( time + $args[1], "FHEM::Siro::Restartset", "$name" ); } ############## on off for timer # up/down for timer mappen auf on/off und timer für stop setzen if ( $comand eq 'downfortimer' ) { Log3( $name, 5, "Siro_Set: down_for_timer @args $args[1]" ); $hash->{helper}{savedcmds}{cmd1} = 'stop'; InternalTimer( time + $args[1], "FHEM::Siro::Restartset", "$name" ); } ################# if ($comand eq "fav") # favoritenanfahrt { if ($favposition eq "nA") { Log3( $name, 1, "Siro Favoritenanfahrt nicht m?glich , Reading nicht gesetzt"); return; } SendCommand( $hash, 'stop' , 'longstop' ); # befehl ?ndern auf position favorite # weiterer programmdurchlauf # per defintition keine weiteren send kommandos helper exexcmd on/off (off) $hash->{helper}{exexcmd} = 'off'; # schaltet das senden folgender befehls ab / nur anpassung der readings $comand = "level"; $zielposition = $favposition; } #################################### # favoritenposition speichern if ( $cmd eq "set_favorite" ) { # lockdevive einrichten ! readingsSingleUpdate( $hash, "state", 'programming', 1 ); my $sequence ; my $blocking; if ($favposition eq "nA") { $sequence = '1:prog,3:stop,3:stop' ; $blocking = 8; } else { $sequence = '1:prog,3:stop,3:stop,3:prog,3:stop,3:stop' ; $blocking =17; } my @sequenzraw =split (/,/,$sequence); my $exectime = $actiontime; foreach my $seqpart (@sequenzraw) { Log3( $name, 5, "Siro setfav : seqpart - $seqpart"); my @seqpartraw =split (/\:/,$seqpart); #$actiontime $exectime = $exectime+$seqpartraw[0]; my $execcmd = $seqpartraw[1]; Log3( $name, 5, "Siro setfav : $exectime - $execcmd"); InternalTimer( $exectime, "FHEM::Siro::Prog", $name." ".$execcmd ); InternalTimer( ($actiontime+$blocking), "FHEM::Siro::Delock", $name ); } readingsSingleUpdate( $hash, "Favorite-Position", $position, 1 ); return; } ################################################### # favoritenposition speichern if ( $cmd eq "del_favorite" ) { if ($args[1] eq "only_shutter" || $args[1] eq "shutter_and_modul") { readingsSingleUpdate( $hash, "state", 'programming', 1 ); my $sequence ; $sequence = '0:prog,2:stop,2:stop' ; my @sequenzraw =split (/,/,$sequence); my $exectime = $actiontime; foreach my $seqpart (@sequenzraw) { Log3( $name, 5, "Siro setfav : seqpart - $seqpart"); my @seqpartraw =split (/\:/,$seqpart); #$actiontime $exectime = $exectime+$seqpartraw[0]; my $execcmd = $seqpartraw[1]; Log3( $name, 5, "Siro setfav : $exectime - $execcmd"); InternalTimer( $exectime, "FHEM::Siro::Prog", $name." ".$execcmd ); InternalTimer( $exectime+10, "FHEM::Siro::Delock", $name ); } } if ($args[1] eq "only_modul" || $args[1] eq "shutter_and_modul") { readingsSingleUpdate( $hash, "Favorite-Position", 'nA', 1 ); } return; } ################################################## ################################## # set on ( device faeht hoch ) if ($comand eq "on" || $comand eq "downfortimer" ) { if ($downtime eq "undef" || $uptime eq "undef") # bei ungesetzten fahrzeiten { readingsSingleUpdate( $hash, "state", "100", 1 ) ; readingsSingleUpdate( $hash, "motor-term", "Function is not available without set runtime attribute, please define", 1 ) ; SendCommand( $hash, 'on' ); return; } if ($state eq "undef" || $state eq "notAvaible") { $state = 0; } my $waytodrive = 100 - $state; my $timetodrive = $waytodrive * $down1time; my $endaction = time + $timetodrive; Log3( $name, 5, "Siro - Settree: on downtime - waytodrive $waytodrive"); Log3( $name, 5, "Siro - Settree: on downtime - state $state"); Log3( $name, 5, "Siro - Settree: on downtime - down1time $down1time"); SendCommand( $hash, 'on' ); SendCommand( $hash, 'stop' ); readingsBeginUpdate($hash); readingsBulkUpdate( $hash, "aktRunningAction", $comand ) ; readingsBulkUpdate( $hash, "aktEndAction", $endaction ) ; readingsBulkUpdate( $hash, "aktTimeAction", $timetodrive ) ; readingsBulkUpdate( $hash, "aktActionFinish", "100" ) ; readingsEndUpdate( $hash, 1); if ($comand eq "on") { readingsSingleUpdate( $hash, "state", "runningDown" , 1 ) ; } else{ readingsSingleUpdate( $hash, "state", "runningDownfortimer" , 1 ) ; } # internen timer setzen runningtime - dann states setzen Log3( $name, 5, "Siro - setze timer -$comand"); InternalTimer( $endaction, "FHEM::Siro::Finish", "$name" ); #befehl ausfuhren } ########################################## # set off ( device faeht runter ) if ($comand eq "off" || $comand eq "upfortimer" ) { if ($downtime eq "undef" || $uptime eq "undef") # bei ungesetzten fahrzeiten { readingsBeginUpdate($hash); readingsBulkUpdate( $hash, "state", "0" ) ; readingsBulkUpdate( $hash, "motor-term", "Function is not available without set runtime attribute, please define") ; readingsBulkUpdate( $hash, "LastAction", $comand ); readingsEndUpdate( $hash, 1); SendCommand( $hash, 'off' ); } if ($state eq "undef" || $state eq "notAvaible") { $state = 100; } my $waytodrive = 0 + $state; my $timetodrive = $waytodrive * $up1time; my $endaction = time + $timetodrive; Log3( $name, 5, "Siro - Settree: off downtime - waytodrive $waytodrive"); Log3( $name, 5, "Siro - Settree: off downtime - state $state"); Log3( $name, 5, "Siro - Settree: off downtime - down1time $down1time"); SendCommand( $hash, 'off' ); readingsBeginUpdate($hash); readingsBulkUpdate( $hash, "aktRunningAction", $comand ) ; readingsBulkUpdate( $hash, "aktEndAction", $endaction ) ; readingsBulkUpdate( $hash, "aktTimeAction", $timetodrive ) ; readingsBulkUpdate( $hash, "aktActionFinish", "0" ) ; readingsEndUpdate( $hash, 1); if ($comand eq "off") { readingsSingleUpdate( $hash, "state", "runningUp" , 1 ) ; } else { readingsSingleUpdate( $hash, "state", "runningUpfortimer" , 1 ) ; } # internen timer setzen runningtime - dann states setzen Log3( $name, 5, "Siro - setze timer -$comand"); InternalTimer( $endaction, "FHEM::Siro::Finish", "$name" ); #befehl ausfuhren } ################################################# # set level ( positionsanfahrt ) if ($comand eq "level") { if ( AttrVal($name,'SIRO_inversPosition','0') eq '1' ) { $zielposition = 100 - $zielposition; $state = 100 - $state; } if ($downtime eq "undef" || $uptime eq "undef") # bei ungesetzten fahrzeiten { Log3( $name, 1, "ERROR Siro - Set: Function is not available without set runtime attribute, please define"); readingsSingleUpdate( $hash, "LastAction", $comand, 1 ); readingsSingleUpdate( $hash, "motor-term", "Function is not available without set runtime attribute, please define", 1 ) ; return "Function PCT is not available without set runtime attribute, please define "; } my $timetodrive; #enth?tlt fahrzeit my $cmdpos ="undef"; # enth?lt fahrbefehl f?r gew?nschte richtung my $cmdactiontime ; # enth?lt fahrtdauer f?r gew?nschte position my $directionmsg; #enth?lt actionstesxt # geforderte farhtrichtung ermitteln if ($state < $zielposition) # fahrt runter ben?tigt { $cmdpos = "on"; # fahrdauer ermitteln $timetodrive = ($zielposition - $state) * $down1time; $directionmsg ="runningDown"; } if ($state > $zielposition) # fahrt hoch ben?tigt { $cmdpos = "off"; # fahrdauer ermitteln $timetodrive = ($state - $zielposition) * $up1time; $directionmsg ="runningUp"; } my $endaction = time + $timetodrive; SendCommand( $hash, $cmdpos ); readingsBeginUpdate($hash); readingsBulkUpdate( $hash, "aktRunningAction", 'position' ) ; readingsBulkUpdate( $hash, "aktEndAction", $endaction ) ; readingsBulkUpdate( $hash, "aktTimeAction", $timetodrive ) ; readingsBulkUpdate( $hash, "aktActionFinish", $zielposition ) ; readingsBulkUpdate( $hash, "state", $directionmsg ) ; readingsEndUpdate( $hash, 1); # internen timer setzen runningtime - dann states setzen Log3( $name, 5, "Siro - setze timer -$comand"); InternalTimer( $endaction, "FHEM::Siro::Finish", "$name" ); Log3( $name, 5, "Siro - Set: found direction - $cmdpos"); Log3( $name, 5, "Siro - Set: found finish - $zielposition"); Log3( $name, 5, "Siro - Set: found position now - $state"); Log3( $name, 5, "Siro - Set: found position drivingtime - $drivingtime"); } ###################################################### # set stop if ($comand eq "stop" && ReadingsVal( $name, 'LastAction', 'undef' ) ne $comand ) { if ($downtime eq "undef" || $uptime eq "undef") # bei ungesetzten fahrzeiten { SendCommand( $hash, 'stop' ); readingsBeginUpdate($hash); readingsBulkUpdate( $hash, "state", "notAvaible" ) ; readingsBulkUpdate( $hash, "LastAction", $comand ); readingsBulkUpdate( $hash, "motor-term", "Function is not available without set runtime attribute, please define", 1 ) ; readingsEndUpdate( $hash, 1); return; } else # bei gesetzten fahrzeiten { SendCommand( $hash, 'stop' ); } } ############################################ # batteriecheck if ( AttrVal( $name, 'SIRO_Battery_low','undef' ) ne "undef") { readingsSingleUpdate( $hash, "batteryState", "ok" , 1 ) if (AttrVal( $name, 'SIRO_Battery_low','' ) > ReadingsNum( $name, 'motor-term', 0 )); readingsSingleUpdate( $hash, "batteryState", "low" , 1 ) if (AttrVal( $name, 'SIRO_Battery_low','' ) < ReadingsNum( $name, 'motor-term', 0 )); } else { readingsSingleUpdate( $hash, "batteryState", "unknown" , 1 ); } return; } ####################### sub Delock($) { # entsperrt device nach programmierung des shutters my ($input) = @_; my ( $name, $arg ) = split(/ /, $input ); my $hash = $defs{$name}; my $position = ReadingsVal( $name, 'pct', '' ); #position pct bis zum ende einer aktion readingsSingleUpdate( $hash, "state", $position , 1 ); } ####################### sub Prog($) { #wird im programmiermode von internaltimer aufgerufen my ($input) = @_; my ( $name, $arg ) = split(/ /, $input ); my $hash = $defs{$name}; Log3( $name, 5, "Siro Prog - $arg "); SendCommand( $hash, $arg ); return; } ####################### sub Finish($) { # wird bei errechnetem aktionsende aufgerufen my ($input) = @_; my ( $name, $arg ) = split( / /, $input ); my $hash = $defs{$name}; return "" if ( IsDisabled($name) ); my $invers = 1; my $action = ReadingsVal( $name, 'aktRunningAction', '' ); my $state = ReadingsVal( $name, 'aktActionFinish', 'notAvaible' ); my $operationtime = ReadingsNum( $name, 'motor-term', 0 ); my $newoperationtime = $operationtime + ReadingsNum ($name, 'aktTimeAction', 0 ); Log3( $name, 5, "Siro - Finish: "); Log3( $name, 5, "action - $action "); SendCommand( $hash, 'stop' ) if ( $action ne "on" && $action ne "off" ) ; if ( AttrVal($name,'SIRO_inversPosition','0') eq '1' ) { $state = 100 - $state; } readingsBeginUpdate($hash); readingsBulkUpdate( $hash, "state", $state ) ; readingsBulkUpdate( $hash, "pct", $state ) ; readingsBulkUpdate( $hash, "aktRunningAction", "noAction" ) ; readingsBulkUpdate( $hash, "aktEndAction", 0 ) ; readingsBulkUpdate( $hash, "aktTimeAction", 0 ) ; readingsBulkUpdate( $hash, "aktActionFinish", 0 ) ; readingsBulkUpdate( $hash, "motor-term", $newoperationtime, 1 ) ; readingsEndUpdate( $hash, 1); return; } ##################### sub Restartset($) { my ($input) = @_; my ( $name, $arg ) = split( / /, $input ); my $hash = $defs{$name}; return "" if ( IsDisabled($name) ); Log3( $name, 5, "Siro - restartset : aufruf"); my $cmd = $hash->{helper}{savedcmds}{cmd1}; my $pos = $hash->{helper}{savedcmds}{cmd2}; delete( $hash->{helper}{savedcmds} ); Set($hash, $name, $cmd , $pos); return; } ##################### sub versionchange($) { my ($input) = @_; my ( $name, $arg ) = split( / /, $input ); my $hash = $defs{$name}; return "" if ( IsDisabled($name) ); Log3( $name, 0, "Siro - versionchange : aufruf"); my $attr; $attr = AttrVal($name,'time_to_close','undef'); CommandAttr(undef,$name . ' SIRO_time_to_close ' . $attr) if ( AttrVal($name,'time_to_close','undef') ne 'undef' ); fhem("deleteattr $name time_to_close"); $attr = AttrVal($name,'time_to_open','undef'); CommandAttr(undef,$name . ' SIRO_time_to_open ' . $attr) if ( AttrVal($name,'time_to_open','undef') ne 'undef' ); fhem("deleteattr $name time_to_open"); $attr = AttrVal($name,'SignalLongStopRepeats','undef'); CommandAttr(undef,$name . ' SIRO_signalLongStopRepeats ' . $attr) if ( AttrVal($name,'SignalLongStopRepeats','undef') ne 'undef' ); fhem("deleteattr $name SignalLongStopRepeats"); $attr = AttrVal($name,'SignalRepeats','undef'); CommandAttr(undef,$name . ' SIRO_signalRepeats ' . $attr) if ( AttrVal($name,'SignalRepeats','undef') ne 'undef' ); fhem("deleteattr $name SignalRepeats"); $attr = AttrVal($name,'invers_position','undef'); CommandAttr(undef,$name . ' SIRO_inversPosition ' . $attr) if ( AttrVal($name,'invers_position','undef') ne 'undef' ); fhem("deleteattr $name invers_position"); CommandAttr( undef,$name . ' devStateIcon {if (ReadingsVal( $name, \'state\', \'undef\' ) =~ m/[a-z]/ ) { return \'programming:edit_settings notAvaible:hue_room_garage runningUp.*:fts_shutter_up runningDown.*:fts_shutter_down\'}else{return \'[0-9]{1,3}:fts_shutter_1w_\'.(int($state/10)*10)}}' ); CommandAttr(undef,$name . ' webCmd stop:open:close:fav:pct'); fhem("deleteattr $name down_limit_mode_1"); fhem("deleteattr $name operation_mode"); fhem("deleteattr $name invers_position"); fhem("deleteattr $name down_auto_stop"); fhem("deleteattr $name prog_fav_sequence"); my $seconds = ReadingsVal( $name, 'operating_seconds', '0' ); fhem("deletereading $name .*"); readingsBeginUpdate($hash); readingsBulkUpdate( $hash, "state", "0" ); readingsBulkUpdate( $hash, "pct", "0" ) ; readingsBulkUpdate( $hash, "motor-term", $seconds ) ; readingsEndUpdate( $hash, 1 ); SendCommand( $hash, 'off' ); return; } ################## sub fhemwebFn($$$$) { my ( $FW_wname, $d, $room, $pageHash ) =@_; # pageHash is set for summaryFn. my $hash = $defs{$d}; my $name = $hash->{NAME}; return "" if ( IsDisabled($name) ); Log3( $name, 5, "Siro - fhemweb"); my $progmode =$hash->{helper}{progmode}; Log3( $name, 5, "Siro - fhemweb $name progmode $progmode"); my $msg; ############## versionsänderung # kann irgendwann entfernt werden if (ReadingsVal( $name, 'last_reset_os', 'undef' ) ne 'undef') { $msg.= "
 
ACHTUNG !
 
Das Siromudul wurde komplett erneuert.
Die vorhandenen Attribute und Readings sind inkompatibel und das Device derzeit nur bedingt funktionsfaehig:
 
Durch druecken des untenstehenden Buttons ist eine automatisch Neukonfiguration moeglich, dabei werden vorhandene Daten beruecksichtigt. Nach betaetigen des Buttons macht das Rollo eine Initialisierungsfahrt nach oben.
 
Danach ist eine Funktion mit der alten Siroversion nicht mehr moeglich.
Fuer den Fall, das doch die alte Version wieder eingesetzt werden sollte ist die jetzt vorhandene Rawdefinition vor einer Umstellung zu sichern.
Wichtig: Bei einer automatischen Umstellung werden entgegen den Massgaben vorhandene Userattribute geaendert ! "; $msg.= "
 
"; $msg.= ""; $msg.= " "; $msg.= "
 
"; } ###################### if ( $progmode eq "on") { $msg.= "
 
Programmiermodus aktiv, es werden nur folgende Befehle unterstuetzt:
 
"; $msg.= ""; $msg.= " "; $msg.= ""; $msg.= " "; $msg.= ""; $msg.= " "; $msg.= ""; $msg.= " "; $msg.= " "; $msg.= " "; $msg.= " "; $msg.= " "; $msg.= " "; $msg.= " "; $msg.= " "; $msg.= " "; $msg.= " "; $msg.= ""; $msg.= " 
 "; $msg.= "
- Motor anlernen: P2,P2,DOWN je nach Wicklung des Rollos"; $msg.= " "; $msg.= "
- Motor anlernen: P2,P2,UP je nach Wicklung des Rollos"; $msg.= " "; $msg.= "
- Einstellmodus aktivieren: P2, UP, P2"; $msg.= " "; $msg.= "
- Endlagen loeschen: P2, DOWN, P2"; $msg.= " "; $msg.= "
- Pairing loeschen: P2, STOP, P2"; $msg.= " "; $msg.= "
 
"; } $msg.= ""; return $msg; } ################ 1; =pod =item summary Supports rf shutters from Siro =item summary_DE Unterstützt Siro Rollo-Funkmotoren =begin html

Siro protocol

=end html =begin html_DE

Siro protocol

=end html_DE =cut