@@ -77,7 +77,7 @@ sub Initialize {
<a name="NUKIDevice"></a>
<h3>NUKIDevice</h3>
<ul>
<u><b>NUKIDevice - Controls Nuki Devices </b></u>
<u><b>NUKIDevice - Controls the Nuki Smartlock </b></u>
<br>
The Nuki module connects FHEM over the Nuki Bridge with a Nuki Smartlock or Nuki Opener. After that, it´
Normally the Nuki devices are automatically created by the bridge module.
@@ -112,9 +112,10 @@ sub Initialize {
<li>paired - paired information false/true</li>
<li>rssi - value of rssi</li>
<li>state - Status of the Smartlock or error message if any error.</li>
<li>stateName - Status of the Smartlock or error message if any error.</li>
<li>succes - true, false Returns the status of the last closing command. Ok or not Ok.</li>
</ul>
<br>Opener
<br>Opener
<ul>
<li>batteryState - battery state ok/low</li>
<li>deviceType - type name of nuki device smartlock/smartlock3/opener</li>
@@ -127,11 +128,13 @@ sub Initialize {
<li>ringactionTimestamp - timestamp of ring</li>
<li>rssi - value of rssi</li>
<li>state - Status of the Smartlock or error message if any error.</li>
<li>stateName - Status of the Smartlock or error message if any error.</li>
<li>succes - true, false Returns the status of the last closing command. Ok or not Ok.</li>
</ul>
<br><br>
<a name="NUKIDeviceset"></a>
<b>Set</b>
<br>Smartlock
<ul>
<li>statusRequest - retrieves the current state of the smartlock from the bridge.</li>
<li>lock - lock</li>
@@ -140,7 +143,15 @@ sub Initialize {
<li>unpair - Removes the pairing with a given Smart Lock</li>
<li>locknGo - lock when gone</li>
<li>locknGoWithUnlatch - lock after the door has been opened</li>
<br >
</ul >
<br>Opener
<ul>
<li>statusRequest - retrieves the current state of the smartlock from the bridge.</li>
<li>activateRto - activate ring to open mode / ringing the bell activates the electric strike actuation </li>
<li>deactivateRto - deactivate ring to open mode</li>
<li>electricStrikeActuation - electric strike actuation</li>
<li>activateContinuousMode - activate Nuki Opener Mode with Ring to Open continuously</li>
<li>deactivateContinuousMode - deactivate Ring to Open continuously</li>
</ul>
<br><br>
<a name="NUKIDeviceattribut"></a>
@@ -197,31 +208,41 @@ sub Initialize {
</ul>
<br>Opener
<ul>
<li>batteryState - battery state ok/low </li>
<li>deviceType - type name of nuki device smartlock/smartlock3/opener </li>
<li>firmwareVersion - version of device firmware </li>
<li>mode - Operation mode (door mode/continuous mode) </li>
<li>name - name of the devic e</li>
<li>nukiid - id of the nuki device </li>
<li>paired - paired information false/true </li>
<li>ringactionState - state of ring (0/1) </li>
<li>ringactionTimestamp - timestamp of ring </li>
<li>batteryCharging - wird die Batterie geladen true/false. </li>
<li>batteryPercent - aktueller Ladestand der Batterie. </li>
<li>batteryState - Staus der Batterie ok/low </li>
<li>deviceType - der Typenname des Nuki Gerätes smartlock/smartlock3/opener </li>
<li>firmwareVersion - Version der Geräte Firmwar e</li>
<li>name - Name des Nuki Gerätes </li>
<li>nukiid - die Geräte Id </li>
<li>paired - paired Informationen false/true </li>
<li>ringactionState - Status der Klingel. Wurde eben geklingelt (0/1) </li>
<li>ringactionTimestamp - Zeitstempel des klingelns</li>
<li>rssi - Wert f ür die empfangene Signalst ärke</li>
<li>state - Status des Smartlock bzw . Fehlermeldung von Fehler vorhanden.</li>
<li>state - Status des Opener bzw . Fehlermeldung von Fehler vorhanden.</li>
<li>succes - true, false. Gibt den Status des letzen Befehls zurück.</li>
</ul>
<br><br>
<a name="NUKIDeviceset"></a>
<b>Set</b>
<br>Smartlock
<ul>
<li>statusRequest - retrieves the current state of the smartlock from the b ridge.</li>
<li>lock - lock </li>
<li>unlock - unlock </li>
<li>unlatch - unlock / open Door </li>
<li>unpair - Removes the pairing w ith a given Smart Lock</li>
<li>locknGo - lock wh en gone </li>
<li>locknGoWithUnlatch - lock after the door has been opened </li>
<br >
<li>statusRequest - ruft den aktuellen Status des Smartlocks von der B ridge ab .</li>
<li>lock - verschließen </li>
<li>unlock - aufschließen </li>
<li>unlatch - entriegeln/Falle öffnen. </li>
<li>unpair - entfernt das pairing m it dem Smart Lock</li>
<li>locknGo - verschließen wenn gegangen </li>
<li>locknGoWithUnlatch - verschließen nach dem die Falle geöffnet wurde. </li>
</ul >
<br>Opener
<ul>
<li>statusRequest - ruft den aktuellen Status des Opener von der Bridge ab.</li>
<li>activateRto - aktiviert den ring to open Modus / ein klingeln aktiviert den Türöffner</li>
<li>deactivateRto - deaktiviert den ring to open Modus</li>
<li>electricStrikeActuation - aktiviert den Türöffner</li>
<li>activateContinuousMode - aktiviert dauerhaft öffnen der Tür durch klingeln Modus</li>
<li>deactivateContinuousMode - deaktiviert diesen Modus</li>
</ul>
<br><br>
<a name="NUKIDeviceattribut"></a>
@@ -252,7 +273,7 @@ sub Initialize {
],
"release_status": "stable",
"license": "GPL_2",
"version": "v2.0.1 ",
"version": "v2.0.2 ",
"author": [
"Marko Oldenburg <leongaultier@gmail.com>"
],
@@ -266,7 +287,7 @@ sub Initialize {
"runtime": {
"requires": {
"FHEM": 5.00918799,
"perl": 5.016 ,
"perl": 5.024 ,
"Meta": 0,
"JSON": 0,
"Date::Parse": 0