From f919bab52440e44961dc37b7f6e9aee17a972ba7 Mon Sep 17 00:00:00 2001
From: Marko Oldenburg <marko.oldenburg@cooltux.net>
Date: Sat, 11 Dec 2021 19:10:53 +0100
Subject: [PATCH 1/4] revision of the commandref  from bridge modul

---
 FHEM/73_NUKIBridge.pm  | 34 ++++++++++++++++++++++++++--------
 controls_NukiSmart.txt |  8 ++++----
 2 files changed, 30 insertions(+), 12 deletions(-)

diff --git a/FHEM/73_NUKIBridge.pm b/FHEM/73_NUKIBridge.pm
index 1368933..333e6bf 100644
--- a/FHEM/73_NUKIBridge.pm
+++ b/FHEM/73_NUKIBridge.pm
@@ -93,13 +93,27 @@ sub Initialize {
 <a name="NUKIBridge"></a>
 <h3>NUKIBridge</h3>
 <ul>
-  <u><b>NUKIBridge - controls the Nuki Smartlock over the Nuki Bridge</b></u>
+  <u><b>NUKIBridge - controls Nuki Devices (Smartlock, Opener and so on) over the Nuki Bridge</b></u>
   <br>
-  The Nuki Bridge module connects FHEM to the Nuki Bridge and then reads all the smartlocks available on the bridge. Furthermore, the detected Smartlocks are automatically created as independent devices.
+  The Nuki Bridge module connects FHEM to the Nuki Bridge and then reads all the Nuki devices available on the bridge. Furthermore, the detected Nuki smart devices are automatically created as independent devices.
   <br><br>
   <a name="NUKIBridgedefine"></a>
-  <b>Define</b>
-  <ul><br>
+  <b>Define</b><br>
+  There a two ways to define the bridge for use in fhem.<br>
+  <b>first:</b>
+  <ul>
+    <code>define &lt;name&gt; NUKIBridge</code>
+    <br><br>
+    Example:
+    <ul><br>
+      <code>define NBridge1 NUKIBridge</code><br>
+    </ul>
+    <br>
+    This statement creates a NUKIBridge device and activated the Bridge discovery and API activation. Once a bridge has been discovered on the LAN the API done be activated and the API token retrieved. You has to confirm this request by pressing the button on the bridge.<br>
+    After the bridge device is setting up, all available Smartlocks are automatically placed in FHEM.
+  </ul><br>
+  <b>second:</b>
+  <ul>
     <code>define &lt;name&gt; NUKIBridge &lt;HOST&gt; &lt;API-TOKEN&gt;</code>
     <br><br>
     Example:
@@ -114,16 +128,18 @@ sub Initialize {
   <a name="NUKIBridgereadings"></a>
   <b>Readings</b>
   <ul>
-    <li>bridgeAPI - API Version of bridge</li>
     <li>bridgeType - Hardware bridge / Software bridge</li>
-    <li>currentTime - Current timestamp</li>
+    <li>configAuthSuccess - state of command activat/deactiviate bridge discovery</li>
+    <li>currentGMTime - Current timestamp</li>
     <li>firmwareVersion - Version of the bridge firmware</li>
     <li>hardwareId - Hardware ID</li>
     <li>lastError - Last connected error</li>
     <li>serverConnected - Flag indicating whether or not the bridge is connected to the Nuki server</li>
     <li>serverId - Server ID</li>
+    <li>state - state of the bridge device, mostly online</li>
     <li>uptime - Uptime of the bridge in seconds</li>
     <li>wifiFirmwareVersion- Version of the WiFi modules firmware</li>
+    <li>wlanConnected - wifi connect?</li>
     <br>
     The preceding number is continuous, starts with 0 und returns the properties of <b>one</b> Smartlock.
    </ul>
@@ -186,16 +202,18 @@ sub Initialize {
   <a name="NUKIBridgereadings"></a>
   <b>Readings</b>
   <ul>
-    <li>bridgeAPI - API Version der Bridge</li>
     <li>bridgeType - Hardware oder Software/App Bridge</li>
-    <li>currentTime - aktuelle Zeit auf der Bridge zum zeitpunkt des Info holens</li>
+    <li>configAuthSuccess - status des Kommandos zum aktivieren/deaktivieren des bridge discovery</li>
+    <li>currentGMTime - aktuelle Zeit auf der Bridge zum zeitpunkt des Info holens</li>
     <li>firmwareVersion - aktuell auf der Bridge verwendete Firmwareversion</li>
     <li>hardwareId - ID der Hardware Bridge</li>
     <li>lastError - gibt die letzte HTTP Errormeldung wieder</li>
     <li>serverConnected - true/false gibt an ob die Hardwarebridge Verbindung zur Nuki-Cloude hat.</li>
     <li>serverId - gibt die ID des Cloudeservers wieder</li>
+    <li>state - status der bridge zu fhem, zu meist online :-)</li>
     <li>uptime - Uptime der Bridge in Sekunden</li>
     <li>wifiFirmwareVersion- Firmwareversion des Wifi Modules der Bridge</li>
+    <li>wlanConnected - Wlan verbunden?</li>
     <br>
     Die vorangestellte Zahl ist forlaufend und gibt beginnend bei 0 die Eigenschaften <b>Eines</b> Smartlocks wieder.
   </ul>
diff --git a/controls_NukiSmart.txt b/controls_NukiSmart.txt
index 652aa76..98d543f 100644
--- a/controls_NukiSmart.txt
+++ b/controls_NukiSmart.txt
@@ -1,4 +1,4 @@
-UPD 2021-12-10_20:47:57 9332 FHEM/73_NUKIBridge.pm
-UPD 2021-12-10_20:47:57 7681 FHEM/74_NUKIDevice.pm
-UPD 2021-12-10_21:46:37 42734 lib/FHEM/Devices/Nuki/Bridge.pm
-UPD 2021-12-10_21:57:25 16311 lib/FHEM/Devices/Nuki/Device.pm
+UPD 2021-12-11_19:09:00 10331 FHEM/73_NUKIBridge.pm
+UPD 2021-12-10_22:25:04 7681 FHEM/74_NUKIDevice.pm
+UPD 2021-12-10_22:25:04 42734 lib/FHEM/Devices/Nuki/Bridge.pm
+UPD 2021-12-10_22:25:04 16311 lib/FHEM/Devices/Nuki/Device.pm

From 247e0fef54b222e845b2e71962df840b47a8c7bc Mon Sep 17 00:00:00 2001
From: Marko Oldenburg <fhemdevelopment@cooltux.net>
Date: Thu, 16 Dec 2021 18:17:33 +0100
Subject: [PATCH 2/4] rewrite commandref

---
 FHEM/73_NUKIBridge.pm           |  6 +--
 FHEM/74_NUKIDevice.pm           | 88 ++++++++++++++++++++-------------
 lib/FHEM/Devices/Nuki/Bridge.pm |  2 +-
 lib/FHEM/Devices/Nuki/Device.pm |  2 +-
 4 files changed, 60 insertions(+), 38 deletions(-)

diff --git a/FHEM/73_NUKIBridge.pm b/FHEM/73_NUKIBridge.pm
index 333e6bf..d18106b 100644
--- a/FHEM/73_NUKIBridge.pm
+++ b/FHEM/73_NUKIBridge.pm
@@ -1,6 +1,6 @@
 ###############################################################################
 #
-# Developed with VSCodium
+# Developed with VSCodium and richterger perl plugin
 #
 #  (c) 2016-2021 Copyright: Marko Oldenburg (fhemdevelopment at cooltux dot net)
 #  All rights reserved
@@ -267,8 +267,8 @@ sub Initialize {
   ],
   "release_status": "stable",
   "license": "GPL_2",
-  "version": "v2.0.0",
-  "x_apiversion": "1.12.3",
+  "version": "v2.0.1",
+  "x_apiversion": "1.13.0",
   "author": [
     "Marko Oldenburg <leongaultier@gmail.com>"
   ],
diff --git a/FHEM/74_NUKIDevice.pm b/FHEM/74_NUKIDevice.pm
index 24a3b41..800330a 100644
--- a/FHEM/74_NUKIDevice.pm
+++ b/FHEM/74_NUKIDevice.pm
@@ -1,6 +1,6 @@
 ###############################################################################
 #
-# Developed with VSCodium
+# Developed with VSCodium and richterger perl plugin
 #
 #  (c) 2016-2021 Copyright: Marko Oldenburg (fhemdevelopment at cooltux dot net)
 #  All rights reserved
@@ -79,7 +79,7 @@ sub Initialize {
 <ul>
   <u><b>NUKIDevice - Controls the Nuki Smartlock</b></u>
   <br>
-  The Nuki module connects FHEM over the Nuki Bridge with a Nuki Smartlock or Nuki Opener. After that, it´s possible to lock and unlock the Smartlock.<br>
+  The Nuki module connects FHEM over the Nuki Bridge with a Nuki Smartlock or Nuki Opener. After that, it´s possible to control your Nuki devices<br>
   Normally the Nuki devices are automatically created by the bridge module.
   <br><br>
   <a name="NUKIDevicedefine"></a>
@@ -87,7 +87,7 @@ sub Initialize {
   <ul><br>
     <code>define &lt;name&gt; NUKIDevice &lt;Nuki-Id&gt; &lt;IODev-Device&gt; &lt;Device-Type&gt;</code>
     <br><br>
-    Device-Type is 0 for the Smartlock and 2 for the Opener.
+    Device-Type is 0/4 for the Smartlock and 2 for the Opener.
     <br><br>
     Example:
     <ul><br>
@@ -100,35 +100,57 @@ sub Initialize {
   <br><br>
   <a name="NUKIDevicereadings"></a>
   <b>Readings</b>
-  <ul>
-    <li>state - Status of the Smartlock or error message if any error.</li>
-    <li>lockState - current lock status uncalibrated, locked, unlocked, unlocked (lock ‘n’ go), unlatched, locking, unlocking, unlatching, motor blocked, undefined.</li>
-    <li>name - name of the device</li>
-    <li>paired - paired information false/true</li>
-    <li>rssi - value of rssi</li>
-    <li>succes - true, false   Returns the status of the last closing command. Ok or not Ok.</li>
-    <li>batteryCritical - Is the battery in a critical state? True, false</li>
-    <li>batteryState - battery status, ok / low</li>
-  </ul>
-  <br><br>
-  <a name="NUKIDeviceset"></a>
-  <b>Set</b>
-  <ul>
-    <li>statusRequest - retrieves the current state of the smartlock from the bridge.</li>
-    <li>lock - lock</li>
-    <li>unlock - unlock</li>
-    <li>unlatch - unlock / open Door</li>
-    <li>unpair -  Removes the pairing with a given Smart Lock</li>
-    <li>locknGo - lock when gone</li>
-    <li>locknGoWithUnlatch - lock after the door has been opened</li>
-    <br>
-  </ul>
-  <br><br>
-  <a name="NUKIDeviceattribut"></a>
-  <b>Attributes</b>
-  <ul>
-    <li>disable - disables the Nuki device</li>
-    <br>
+  <br>Smartlock
+    <ul>
+        <li>batteryCharging - is the battery charging true/false.</li>
+        <li>batteryPercent - current battry state in percent.</li>
+        <li>batteryState - battery state ok/low</li>
+        <li>deviceType - type name of nuki device smartlock/smartlock3/opener</li>
+        <li>firmwareVersion - version of device firmware</li>
+        <li>name - name of the device</li>
+        <li>nukiid - id of the nuki device</li>
+        <li>paired - paired information false/true</li>
+        <li>rssi - value of rssi</li>
+        <li>state - Status of the Smartlock or error message if any error.</li>
+        <li>stateName - Status of the Smartlock or error message if any error.</li>
+        <li>succes - true, false   Returns the status of the last closing command. Ok or not Ok.</li>
+    </ul>
+  <br>Opener
+    <ul>
+        <li>batteryState - battery state ok/low</li>
+        <li>deviceType - type name of nuki device smartlock/smartlock3/opener</li>
+        <li>firmwareVersion - version of device firmware</li>
+        <li>mode - Operation mode (door mode/continuous mode)</li>
+        <li>name - name of the device</li>
+        <li>nukiid - id of the nuki device</li>
+        <li>paired - paired information false/true</li>
+        <li>ringactionState - state of ring (0/1)</li>
+        <li>ringactionTimestamp - timestamp of ring</li>
+        <li>rssi - value of rssi</li>
+        <li>state - Status of the Smartlock or error message if any error.</li>
+        <li>stateName - Status of the Smartlock or error message if any error.</li>
+        <li>succes - true, false   Returns the status of the last closing command. Ok or not Ok.</li>
+    </ul>
+    <br><br>
+    <a name="NUKIDeviceset"></a>
+    <b>Set</b>
+    <ul>
+        <li>statusRequest - retrieves the current state of the smartlock from the bridge.</li>
+        <li>lock - lock</li>
+        <li>unlock - unlock</li>
+        <li>unlatch - unlock / open Door</li>
+        <li>unpair -  Removes the pairing with a given Smart Lock</li>
+        <li>locknGo - lock when gone</li>
+        <li>locknGoWithUnlatch - lock after the door has been opened</li>
+        <br>
+    </ul>
+    <br><br>
+    <a name="NUKIDeviceattribut"></a>
+    <b>Attributes</b>
+    <ul>
+        <li>disable - disables the Nuki device</li>
+        <br>
+    </ul>
   </ul>
 </ul>
 
@@ -212,7 +234,7 @@ sub Initialize {
   ],
   "release_status": "stable",
   "license": "GPL_2",
-  "version": "v2.0.0",
+  "version": "v2.0.1",
   "author": [
     "Marko Oldenburg <leongaultier@gmail.com>"
   ],
diff --git a/lib/FHEM/Devices/Nuki/Bridge.pm b/lib/FHEM/Devices/Nuki/Bridge.pm
index 9c0555c..1991bf5 100644
--- a/lib/FHEM/Devices/Nuki/Bridge.pm
+++ b/lib/FHEM/Devices/Nuki/Bridge.pm
@@ -1,6 +1,6 @@
 ###############################################################################
 #
-# Developed with VSCodium
+# Developed with VSCodium and richterger perl plugin
 #
 #  (c) 2016-2021 Copyright: Marko Oldenburg (fhemdevelopment at cooltux dot net)
 #  All rights reserved
diff --git a/lib/FHEM/Devices/Nuki/Device.pm b/lib/FHEM/Devices/Nuki/Device.pm
index ad0c529..61bf58b 100644
--- a/lib/FHEM/Devices/Nuki/Device.pm
+++ b/lib/FHEM/Devices/Nuki/Device.pm
@@ -1,6 +1,6 @@
 ###############################################################################
 #
-# Developed with VSCodium
+# Developed with VSCodium and richterger perl plugin
 #
 #  (c) 2016-2021 Copyright: Marko Oldenburg (fhemdevelopment at cooltux dot net)
 #  All rights reserved

From 288646a882cee70ccee98cd2a353e71bb48ff024 Mon Sep 17 00:00:00 2001
From: Marko Oldenburg <fhemdevelopment@cooltux.net>
Date: Thu, 16 Dec 2021 19:04:24 +0100
Subject: [PATCH 3/4] german translation for commandref

---
 FHEM/74_NUKIDevice.pm  | 94 +++++++++++++++++++++++++-----------------
 controls_NukiSmart.txt |  8 ++--
 2 files changed, 60 insertions(+), 42 deletions(-)

diff --git a/FHEM/74_NUKIDevice.pm b/FHEM/74_NUKIDevice.pm
index 800330a..937be44 100644
--- a/FHEM/74_NUKIDevice.pm
+++ b/FHEM/74_NUKIDevice.pm
@@ -77,7 +77,7 @@ sub Initialize {
 <a name="NUKIDevice"></a>
 <h3>NUKIDevice</h3>
 <ul>
-  <u><b>NUKIDevice - Controls the Nuki Smartlock</b></u>
+  <u><b>NUKIDevice - Controls Nuki Devices</b></u>
   <br>
   The Nuki module connects FHEM over the Nuki Bridge with a Nuki Smartlock or Nuki Opener. After that, it´s possible to control your Nuki devices<br>
   Normally the Nuki devices are automatically created by the bridge module.
@@ -112,7 +112,6 @@ sub Initialize {
         <li>paired - paired information false/true</li>
         <li>rssi - value of rssi</li>
         <li>state - Status of the Smartlock or error message if any error.</li>
-        <li>stateName - Status of the Smartlock or error message if any error.</li>
         <li>succes - true, false   Returns the status of the last closing command. Ok or not Ok.</li>
     </ul>
   <br>Opener
@@ -128,7 +127,6 @@ sub Initialize {
         <li>ringactionTimestamp - timestamp of ring</li>
         <li>rssi - value of rssi</li>
         <li>state - Status of the Smartlock or error message if any error.</li>
-        <li>stateName - Status of the Smartlock or error message if any error.</li>
         <li>succes - true, false   Returns the status of the last closing command. Ok or not Ok.</li>
     </ul>
     <br><br>
@@ -160,21 +158,21 @@ sub Initialize {
 <a name="NUKIDevice"></a>
 <h3>NUKIDevice</h3>
 <ul>
-  <u><b>NUKIDevice - Steuert das Nuki Smartlock</b></u>
+  <u><b>NUKIDevice - Zur Steuerung von Nuki Ger&auml;te</b></u>
   <br>
-  Das Nuki Modul verbindet FHEM über die Nuki Bridge  mit einem Nuki Smartlock oder Nuki Opener. Es ist dann m&ouml;glich das Schloss zu ver- und entriegeln.<br>
-  In der Regel werden die Nuki Devices automatisch durch das Bridgemodul angelegt.
+  Das Nuki Modul verbindet FHEM &uuml;ber die Nuki Bridge mit einem Nuki Smartlock oder Opener. Nach der Einrichtung k&ouml;nnen diese Ger&auml;te gesteuert werden.<br>
+  Die Nuki Ger&auml;te werden automatisch nach dem erstellen der Nuki Bridge in FHEM eingerichtet.
   <br><br>
   <a name="NUKIDevicedefine"></a>
   <b>Define</b>
   <ul><br>
     <code>define &lt;name&gt; NUKIDevice &lt;Nuki-Id&gt; &lt;IODev-Device&gt; &lt;Device-Type&gt;</code>
     <br><br>
-    Device-Type ist 0 f&uuml;r das Smartlock und 2 f&üuml;r den Opener.
+    Der Device-Type kann 0/4 f&uuml;r ein Smartlock sein oder 2 f&uuml;r den Opener.
     <br><br>
-    Beispiel:
+    Example:
     <ul><br>
-      <code>define Haust&uuml;r NUKIDevice 1 NBridge1 0</code><br>
+      <code>define Frontdoor NUKIDevice 1 NBridge1 0</code><br>
     </ul>
     <br>
     Diese Anweisung erstellt ein NUKIDevice mit Namen Haust&uuml;r, der NukiId 1 sowie dem IODev Device NBridge1.<br>
@@ -183,35 +181,55 @@ sub Initialize {
   <br><br>
   <a name="NUKIDevicereadings"></a>
   <b>Readings</b>
-  <ul>
-    <li>state - Status des Smartlock bzw. Fehlermeldung von Fehler vorhanden.</li>
-    <li>lockState - aktueller Schlie&szlig;status uncalibrated, locked, unlocked, unlocked (lock ‘n’ go), unlatched, locking, unlocking, unlatching, motor blocked, undefined.</li>
-    <li>name - Name des Smart Locks</li>
-    <li>paired - pairing Status des Smart Locks</li>
-    <li>rssi - rssi Wert des Smart Locks</li>
-    <li>succes - true, false Gibt des Status des letzten Schlie&szlig;befehles wieder. Geklappt oder nicht geklappt.</li>
-    <li>batteryCritical - Ist die Batterie in einem kritischen Zustand? true, false</li>
-    <li>batteryState - Status der Batterie, ok/low</li>
-  </ul>
-  <br><br>
-  <a name="NUKIDeviceset"></a>
-  <b>Set</b>
-  <ul>
-    <li>statusRequest - ruft den aktuellen Status des Smartlocks von der Bridge ab.</li>
-    <li>lock - verschlie&szlig;en</li>
-    <li>unlock - aufschlie&szlig;en</li>
-    <li>unlatch - entriegeln/Falle &ouml;ffnen.</li>
-    <li>unpair -  entfernt das pairing mit dem Smart Lock</li>
-    <li>locknGo - verschlie&szlig;en wenn gegangen</li>
-    <li>locknGoWithUnlatch - verschlie&szlig;en nach dem die Falle ge&ouml;ffnet wurde.</li>
-    <br>
-  </ul>
-  <br><br>
-  <a name="NUKIDeviceattribut"></a>
-  <b>Attribute</b>
-  <ul>
-    <li>disable - deaktiviert das Nuki Device</li>
-    <br>
+  <br>Smartlock
+    <ul>
+        <li>batteryCharging - wird die Batterie geladen true/false.</li>
+        <li>batteryPercent - aktueller Ladestand der Batterie.</li>
+        <li>batteryState - Staus der Batterie ok/low</li>
+        <li>deviceType - der Typenname des Nuki Ger&auml;tes smartlock/smartlock3/opener</li>
+        <li>firmwareVersion - Version der Ger&auml;te Firmware</li>
+        <li>name - Name des Nuki Ger&auml;tes</li>
+        <li>nukiid - die Ger&auml;te Id</li>
+        <li>paired - paired Informationen false/true</li>
+        <li>rssi - Wert f&uuml;r die empfangene Signalst&auml;rke</li>
+        <li>state - Status des Smartlock bzw . Fehlermeldung von Fehler vorhanden.</li>
+        <li>succes - true, false. Gibt den Status des letzen Befehls zur&uuml;ck.</li>
+    </ul>
+  <br>Opener
+    <ul>
+        <li>batteryState - battery state ok/low</li>
+        <li>deviceType - type name of nuki device smartlock/smartlock3/opener</li>
+        <li>firmwareVersion - version of device firmware</li>
+        <li>mode - Operation mode (door mode/continuous mode)</li>
+        <li>name - name of the device</li>
+        <li>nukiid - id of the nuki device</li>
+        <li>paired - paired information false/true</li>
+        <li>ringactionState - state of ring (0/1)</li>
+        <li>ringactionTimestamp - timestamp of ring</li>
+        <li>rssi - Wert f &uuml;r die empfangene Signalst &auml;rke</li>
+        <li>state - Status des Smartlock bzw . Fehlermeldung von Fehler vorhanden.</li>
+        <li>succes - true, false. Gibt den Status des letzen Befehls zur&uuml;ck.</li>
+    </ul>
+    <br><br>
+    <a name="NUKIDeviceset"></a>
+    <b>Set</b>
+    <ul>
+        <li>statusRequest - retrieves the current state of the smartlock from the bridge.</li>
+        <li>lock - lock</li>
+        <li>unlock - unlock</li>
+        <li>unlatch - unlock / open Door</li>
+        <li>unpair -  Removes the pairing with a given Smart Lock</li>
+        <li>locknGo - lock when gone</li>
+        <li>locknGoWithUnlatch - lock after the door has been opened</li>
+        <br>
+    </ul>
+    <br><br>
+    <a name="NUKIDeviceattribut"></a>
+    <b>Attributes</b>
+    <ul>
+        <li>disable - disables the Nuki device</li>
+        <br>
+    </ul>
   </ul>
 </ul>
 
diff --git a/controls_NukiSmart.txt b/controls_NukiSmart.txt
index 98d543f..fe69004 100644
--- a/controls_NukiSmart.txt
+++ b/controls_NukiSmart.txt
@@ -1,4 +1,4 @@
-UPD 2021-12-11_19:09:00 10331 FHEM/73_NUKIBridge.pm
-UPD 2021-12-10_22:25:04 7681 FHEM/74_NUKIDevice.pm
-UPD 2021-12-10_22:25:04 42734 lib/FHEM/Devices/Nuki/Bridge.pm
-UPD 2021-12-10_22:25:04 16311 lib/FHEM/Devices/Nuki/Device.pm
+UPD 2021-12-11_19:37:43 10358 FHEM/73_NUKIBridge.pm
+UPD 2021-12-16_19:03:43 9604 FHEM/74_NUKIDevice.pm
+UPD 2021-12-11_19:37:43 42761 lib/FHEM/Devices/Nuki/Bridge.pm
+UPD 2021-12-11_19:37:43 16338 lib/FHEM/Devices/Nuki/Device.pm

From 2f61d7c408aeea8a9dfc5dff4d7c43a7ff57b7dc Mon Sep 17 00:00:00 2001
From: Marko Oldenburg <fhemdevelopment@cooltux.net>
Date: Fri, 17 Dec 2021 11:57:40 +0100
Subject: [PATCH 4/4] complete the commandref and change version for modules
 and minimal perl version

---
 FHEM/73_NUKIBridge.pm  |  4 +--
 FHEM/74_NUKIDevice.pm  | 67 +++++++++++++++++++++++++++---------------
 controls_NukiSmart.txt |  4 +--
 3 files changed, 48 insertions(+), 27 deletions(-)

diff --git a/FHEM/73_NUKIBridge.pm b/FHEM/73_NUKIBridge.pm
index d18106b..4719c8e 100644
--- a/FHEM/73_NUKIBridge.pm
+++ b/FHEM/73_NUKIBridge.pm
@@ -267,7 +267,7 @@ sub Initialize {
   ],
   "release_status": "stable",
   "license": "GPL_2",
-  "version": "v2.0.1",
+  "version": "v2.0.2",
   "x_apiversion": "1.13.0",
   "author": [
     "Marko Oldenburg <leongaultier@gmail.com>"
@@ -282,7 +282,7 @@ sub Initialize {
     "runtime": {
       "requires": {
         "FHEM": 5.00918799,
-        "perl": 5.016, 
+        "perl": 5.024, 
         "Meta": 0,
         "JSON": 0,
         "Date::Parse": 0
diff --git a/FHEM/74_NUKIDevice.pm b/FHEM/74_NUKIDevice.pm
index 937be44..5b62afc 100644
--- a/FHEM/74_NUKIDevice.pm
+++ b/FHEM/74_NUKIDevice.pm
@@ -77,7 +77,7 @@ sub Initialize {
 <a name="NUKIDevice"></a>
 <h3>NUKIDevice</h3>
 <ul>
-  <u><b>NUKIDevice - Controls Nuki Devices</b></u>
+  <u><b>NUKIDevice - Controls the Nuki Smartlock</b></u>
   <br>
   The Nuki module connects FHEM over the Nuki Bridge with a Nuki Smartlock or Nuki Opener. After that, it´s possible to control your Nuki devices<br>
   Normally the Nuki devices are automatically created by the bridge module.
@@ -112,9 +112,10 @@ sub Initialize {
         <li>paired - paired information false/true</li>
         <li>rssi - value of rssi</li>
         <li>state - Status of the Smartlock or error message if any error.</li>
+        <li>stateName - Status of the Smartlock or error message if any error.</li>
         <li>succes - true, false   Returns the status of the last closing command. Ok or not Ok.</li>
     </ul>
-  <br>Opener
+    <br>Opener
     <ul>
         <li>batteryState - battery state ok/low</li>
         <li>deviceType - type name of nuki device smartlock/smartlock3/opener</li>
@@ -127,11 +128,13 @@ sub Initialize {
         <li>ringactionTimestamp - timestamp of ring</li>
         <li>rssi - value of rssi</li>
         <li>state - Status of the Smartlock or error message if any error.</li>
+        <li>stateName - Status of the Smartlock or error message if any error.</li>
         <li>succes - true, false   Returns the status of the last closing command. Ok or not Ok.</li>
     </ul>
     <br><br>
     <a name="NUKIDeviceset"></a>
     <b>Set</b>
+    <br>Smartlock
     <ul>
         <li>statusRequest - retrieves the current state of the smartlock from the bridge.</li>
         <li>lock - lock</li>
@@ -140,7 +143,15 @@ sub Initialize {
         <li>unpair -  Removes the pairing with a given Smart Lock</li>
         <li>locknGo - lock when gone</li>
         <li>locknGoWithUnlatch - lock after the door has been opened</li>
-        <br>
+    </ul>
+    <br>Opener
+    <ul>
+        <li>statusRequest - retrieves the current state of the smartlock from the bridge.</li>
+        <li>activateRto - activate ring to open mode / ringing the bell activates the electric strike actuation </li>
+        <li>deactivateRto - deactivate ring to open mode</li>
+        <li>electricStrikeActuation - electric strike actuation</li>
+        <li>activateContinuousMode -  activate Nuki Opener Mode with Ring to Open continuously</li>
+        <li>deactivateContinuousMode - deactivate Ring to Open continuously</li>
     </ul>
     <br><br>
     <a name="NUKIDeviceattribut"></a>
@@ -197,31 +208,41 @@ sub Initialize {
     </ul>
   <br>Opener
     <ul>
-        <li>batteryState - battery state ok/low</li>
-        <li>deviceType - type name of nuki device smartlock/smartlock3/opener</li>
-        <li>firmwareVersion - version of device firmware</li>
-        <li>mode - Operation mode (door mode/continuous mode)</li>
-        <li>name - name of the device</li>
-        <li>nukiid - id of the nuki device</li>
-        <li>paired - paired information false/true</li>
-        <li>ringactionState - state of ring (0/1)</li>
-        <li>ringactionTimestamp - timestamp of ring</li>
+        <li>batteryCharging - wird die Batterie geladen true/false.</li>
+        <li>batteryPercent - aktueller Ladestand der Batterie.</li>
+        <li>batteryState - Staus der Batterie ok/low</li>
+        <li>deviceType - der Typenname des Nuki Ger&auml;tes smartlock/smartlock3/opener</li>
+        <li>firmwareVersion - Version der Ger&auml;te Firmware</li>
+        <li>name - Name des Nuki Ger&auml;tes</li>
+        <li>nukiid - die Ger&auml;te Id</li>
+        <li>paired - paired Informationen false/true</li>
+        <li>ringactionState - Status der Klingel. Wurde eben geklingelt (0/1)</li>
+        <li>ringactionTimestamp - Zeitstempel des klingelns</li>
         <li>rssi - Wert f &uuml;r die empfangene Signalst &auml;rke</li>
-        <li>state - Status des Smartlock bzw . Fehlermeldung von Fehler vorhanden.</li>
+        <li>state - Status des Opener bzw . Fehlermeldung von Fehler vorhanden.</li>
         <li>succes - true, false. Gibt den Status des letzen Befehls zur&uuml;ck.</li>
     </ul>
     <br><br>
     <a name="NUKIDeviceset"></a>
     <b>Set</b>
+    <br>Smartlock
     <ul>
-        <li>statusRequest - retrieves the current state of the smartlock from the bridge.</li>
-        <li>lock - lock</li>
-        <li>unlock - unlock</li>
-        <li>unlatch - unlock / open Door</li>
-        <li>unpair -  Removes the pairing with a given Smart Lock</li>
-        <li>locknGo - lock when gone</li>
-        <li>locknGoWithUnlatch - lock after the door has been opened</li>
-        <br>
+        <li>statusRequest - ruft den aktuellen Status des Smartlocks von der Bridge ab.</li>
+        <li>lock - verschlie&szlig;en</li>
+        <li>unlock - aufschlie&szlig;en</li>
+        <li>unlatch - entriegeln/Falle &ouml;ffnen.</li>
+        <li>unpair -  entfernt das pairing mit dem Smart Lock</li>
+        <li>locknGo - verschlie&szlig;en wenn gegangen</li>
+        <li>locknGoWithUnlatch - verschlie&szlig;en nach dem die Falle ge&ouml;ffnet wurde.</li>
+    </ul>
+    <br>Opener
+    <ul>
+        <li>statusRequest - ruft den aktuellen Status des Opener von der Bridge ab.</li>
+        <li>activateRto - aktiviert den ring to open Modus / ein klingeln aktiviert den T&uuml;r&ouml;ffner</li>
+        <li>deactivateRto - deaktiviert den ring to open Modus</li>
+        <li>electricStrikeActuation - aktiviert den T&uuml;r&ouml;ffner</li>
+        <li>activateContinuousMode -  aktiviert dauerhaft &ouml;ffnen der T&uuml;r durch klingeln Modus</li>
+        <li>deactivateContinuousMode - deaktiviert diesen Modus</li>
     </ul>
     <br><br>
     <a name="NUKIDeviceattribut"></a>
@@ -252,7 +273,7 @@ sub Initialize {
   ],
   "release_status": "stable",
   "license": "GPL_2",
-  "version": "v2.0.1",
+  "version": "v2.0.2",
   "author": [
     "Marko Oldenburg <leongaultier@gmail.com>"
   ],
@@ -266,7 +287,7 @@ sub Initialize {
     "runtime": {
       "requires": {
         "FHEM": 5.00918799,
-        "perl": 5.016, 
+        "perl": 5.024, 
         "Meta": 0,
         "JSON": 0,
         "Date::Parse": 0
diff --git a/controls_NukiSmart.txt b/controls_NukiSmart.txt
index fe69004..c9e65e7 100644
--- a/controls_NukiSmart.txt
+++ b/controls_NukiSmart.txt
@@ -1,4 +1,4 @@
-UPD 2021-12-11_19:37:43 10358 FHEM/73_NUKIBridge.pm
-UPD 2021-12-16_19:03:43 9604 FHEM/74_NUKIDevice.pm
+UPD 2021-12-17_11:56:40 10358 FHEM/73_NUKIBridge.pm
+UPD 2021-12-17_11:56:38 11116 FHEM/74_NUKIDevice.pm
 UPD 2021-12-11_19:37:43 42761 lib/FHEM/Devices/Nuki/Bridge.pm
 UPD 2021-12-11_19:37:43 16338 lib/FHEM/Devices/Nuki/Device.pm