testing #80
@ -7,6 +7,7 @@
|
||||
#
|
||||
# Special thanks goes to comitters:
|
||||
# - Michael (mbrak) Thanks for Commandref
|
||||
# - Christian (zife) Thanks for Commandref
|
||||
# - Matthias (Kenneth) Thanks for Wiki entry
|
||||
# - BioS Thanks for predefined start points Code
|
||||
# - fettgu Thanks for Debugging Irrigation Control data flow
|
||||
@ -1234,7 +1235,7 @@ sub ReadingLangGerman {
|
||||
'awake' => 'Aufgewacht',
|
||||
'schedule permanently paused' => 'Zeitplan dauerhaft pausiert',
|
||||
'paused until %s' => 'pausiert bis %s',
|
||||
'will be irrigated %.f minutes remaining.'=> 'Wird bewässert. %.f Minuten verbleibend.',
|
||||
'watering. %.f minutes left' => 'Wird bewässert. %.f Minuten verbleibend.',
|
||||
'next watering: %s' => 'Nächste Bewässerung: %s',
|
||||
'n/a' => 'nicht verfügbar',
|
||||
'pump_not_filled' => 'Pumpe nicht gefüllt',
|
||||
@ -1389,20 +1390,27 @@ sub SetPredefinedStartPoints {
|
||||
|
||||
=item device
|
||||
=item summary Modul to control GardenaSmart Devices
|
||||
=item summary_DE Modul zur Steuerung von GardenaSmartgeräten
|
||||
|
||||
=item summary_DE Modul zur Steuerung von GardenaSmartgeräten
|
||||
=begin html
|
||||
|
||||
<a name="GardenaSmartDevice"></a>
|
||||
<h3>GardenaSmartDevice</h3>
|
||||
<ul>
|
||||
In combination with GardenaSmartBridge this FHEM Module controls the GardenaSmart Device using the GardenaCloud
|
||||
In combination with Fhem device GardenaSmartBridge this Fhem module enables communication between GardenaCloud and
|
||||
fhem.
|
||||
<br><br>
|
||||
Once the Bridge device is created, the connected devices are automatically recognized and created in FHEM. <br>
|
||||
From now on the devices can be controlled and changes in the GardenaAPP are synchronized with the state and readings of the devices.
|
||||
Once the bridge device is created, the connected Gardena devices will be recognized and created in Fhem
|
||||
automatically.<br>
|
||||
From now on these devices can be controlled via Fhem. Changes in the Gardena App are synchronized with state and
|
||||
redings of the devices.
|
||||
<br><br>
|
||||
So far, known devices are mower, smart water control, irrigation control, smart sensors, power plug and pressure
|
||||
pump. Schedules can be disabled/enabled via fhem, defining or deleting them must be done via the Gardena App.<br>
|
||||
<a name="GardenaSmartDevicereadings"></a>
|
||||
<br><br><br>
|
||||
<b>Readings</b>
|
||||
</ul>
|
||||
<br>
|
||||
<ul>
|
||||
<b>Readings (model = mower)</b>
|
||||
<ul>
|
||||
<li>battery-charging - Indicator if the Battery is charged (0/1) or with newer Firmware (false/true)</li>
|
||||
<li>battery-level - load percentage of the Battery</li>
|
||||
@ -1511,59 +1519,145 @@ sub SetPredefinedStartPoints {
|
||||
</li>
|
||||
</ul>
|
||||
<br><br>
|
||||
<a name="GardenaSmartDeviceattributes"></a>
|
||||
<b>Attributes</b>
|
||||
<b>Readings (model = watering_computer)</b>
|
||||
<ul>
|
||||
<li>readingValueLanguage - Change the Language of Readings (de,en/if not set the default is english and the global language is not set at german) </li>
|
||||
<li>model - </li>
|
||||
<li>[tbd.]</li>
|
||||
</ul>
|
||||
<br><br>
|
||||
<b>Readings (model = ic24)</b>
|
||||
<ul>
|
||||
<li>[tbd.]</li>
|
||||
</ul>
|
||||
<br><br>
|
||||
<b>Readings (model = sensor)</b>
|
||||
<ul>
|
||||
<li>[tbd.]</li>
|
||||
</ul>
|
||||
<br><br>
|
||||
<b>Readings (model = sensor2)</b>
|
||||
<ul>
|
||||
<li>[tbd.]</li>
|
||||
</ul>
|
||||
<br><br>
|
||||
<b>Readings (model = power)</b>
|
||||
<ul>
|
||||
<li>[tbd.]</li>
|
||||
</ul>
|
||||
<br><br>
|
||||
<b>Readings (model = electronic_pressure_pump)</b>
|
||||
<ul>
|
||||
<li>[tbd.]</li>
|
||||
</ul>
|
||||
<br><br>
|
||||
<a name="GardenaSmartDeviceattributes"></a>
|
||||
<b>Attribute</b>
|
||||
<ul>
|
||||
<li>IODev - Name of GardenaSmartBridge device</li>
|
||||
<li>extendedState 0|1 - [tbd.]</li>
|
||||
<li>model watering_computer|sensor|sensor2|mower|ic24|power|electronic_pressure_pump - model of
|
||||
GardenaSmartDevice</li>
|
||||
<li>readingValueLanguage en|de - Reading language enlish or german (default: english, if global language is not
|
||||
set to german)</li>
|
||||
</ul>
|
||||
<br><br>
|
||||
<a name="GardenaSmartDeviceset"></a>
|
||||
<b>set</b>
|
||||
<b>set (model = mower)</b>
|
||||
<ul>
|
||||
<li>winter_mode - awake | hibernate</li>
|
||||
</ul>
|
||||
<ul>
|
||||
<h3>mower</h3>
|
||||
<li>parkUntilFurtherNotice</li>
|
||||
<li>parkUntilNextTimer</li>
|
||||
<li>startOverrideTimer - (in minutes, 60 = 1h, 1440 = 24h, 4320 = 72h)</li>
|
||||
<li>startResumeSchedule</li>
|
||||
<li>startpoint enable|disable 1|2|3 - enables or disables one or more predefined start points</li>
|
||||
<li>parkUntilFurtherNotice - park mower and disable schedule</li>
|
||||
<li>parkUntilNextTimer - park mower until next schedule</li>
|
||||
<li>startOverrideTimer n - manual mowing for n minutes (e.g. 60 = 1h, 1440 = 24h, 4320 = 72h)</li>
|
||||
<li>startResumeSchedule - enable schedule</li>
|
||||
<li>startPoint enable|disable 1|2|3 - enable or disable pre-defined starting points</li>
|
||||
<ul>
|
||||
<li>set NAME startpoint enable 1</li>
|
||||
<li>set NAME startpoint disable 3 enable 1</li>
|
||||
</ul>
|
||||
<h3>irrigation control</h3>
|
||||
<li>resumeScheduleValve - start schedule irrigation on valve n</li>
|
||||
<li>stopScheduleValve - stop schedule irrigation on valve n (Default: 2038-01-18T00:00:00.000Z) | optional params hours (now + hours)</li>
|
||||
<li>winter_mode awake|hibernate - Disable or enable winter mode</li>
|
||||
</ul>
|
||||
<br><br>
|
||||
<b>set (model = watering_computer)</b>
|
||||
<ul>
|
||||
<li>cancelOverride - stop (manual) watering</li>
|
||||
<li>manualButtonTime n - set watering time for manual button (0 disables button)</li>
|
||||
<li>manualOverride n - manual watering for n minutes</li>
|
||||
<li>resumeSchedule - enable schedule</li>
|
||||
<li>stopSchedule n - disable schedule for n hours (Default: 2038-01-18T00:00:00.000Z, Gardena App reads it as
|
||||
"permanently")</li>
|
||||
<li>winter_mode awake|hibernate - Disable or enable winter mode</li>
|
||||
</ul>
|
||||
<br><br>
|
||||
<b>set (model = ic24)</b>
|
||||
<ul>
|
||||
<li>cancelOverrideValve1 - stop (manual) watering for valve 1 </li>
|
||||
<li>cancelOverrideValve2 - stop (manual) watering for valve 2 </li>
|
||||
<li>cancelOverrideValve3 - stop (manual) watering for valve 3 </li>
|
||||
<li>cancelOverrideValve4 - stop (manual) watering for valve 4 </li>
|
||||
<li>cancelOverrideValve5 - stop (manual) watering for valve 5 </li>
|
||||
<li>cancelOverrideValve6 - stop (manual) watering for valve 6 </li>
|
||||
<li>closeAllValves - close all valves</li>
|
||||
<h3>water control</h3>
|
||||
<li>manualButtonTime - set manual time for button press (in minutes) 0 disable button</li>
|
||||
<li>stopSchedule - stop schedule for now + n hours (Default: 2038-01-18T00:00:00.000Z)</li>
|
||||
<li>resumeSchedule - resume schedule</li>
|
||||
<li>manualDurationValve1 n - open valve 1 for n minutes</li>
|
||||
<li>manualDurationValve2 n - open valve 2 for n minutes</li>
|
||||
<li>manualDurationValve3 n - open valve 3 for n minutes</li>
|
||||
<li>manualDurationValve4 n - open valve 4 for n minutes</li>
|
||||
<li>manualDurationValve5 n - open valve 5 for n minutes</li>
|
||||
<li>manualDurationValve6 n - open valve 6 for n minutes</li>
|
||||
<li>resumeScheduleValve n - enable schedule for valve n</li>
|
||||
<li>stopScheduleValve n m - disable schedule for valve n for m hours (Default: 2038-01-18T00:00:00.000Z, Gardena
|
||||
App reads it as "permanently")</li>
|
||||
<li>winter_mode awake|hibernate - Disable or enable winter mode</li>
|
||||
</ul>
|
||||
<br><br>
|
||||
<b>set (model = sensor)</b>
|
||||
<ul>
|
||||
<li>refresh temperature|humidity|light - refresh sensor reading for temperature, humidity or daylight</li>
|
||||
<li>winter_mode awake|hibernate - Disable or enable winter mode</li>
|
||||
</ul>
|
||||
<br><br>
|
||||
<b>set (model = sensor2)</b>
|
||||
<ul>
|
||||
<li>refresh temperature|humidity - refresh sensor reading for temperature or humidity</li>
|
||||
<li>winter_mode awake|hibernate - Disable or enable winter mode</li>
|
||||
</ul>
|
||||
<br><br>
|
||||
<b>set (model = power)</b>
|
||||
<ul>
|
||||
<li>[tbd.]</li>
|
||||
</ul>
|
||||
<br><br>
|
||||
<b>set (model = electronic_pressure_pump)</b>
|
||||
<ul>
|
||||
<li>[tbd.]</li>
|
||||
</ul>
|
||||
</ul>
|
||||
|
||||
=end html
|
||||
|
||||
=begin html_DE
|
||||
|
||||
<a name="GardenaSmartDevice"></a>
|
||||
<h3>GardenaSmartDevice</h3>
|
||||
<ul>
|
||||
Zusammen mit dem Device GardenaSmartDevice stellt dieses FHEM Modul die Kommunikation zwischen der GardenaCloud und Fhem her.
|
||||
Zusammen mit dem Device GardenaSmartBridge stellt dieses Fhem-Modul die Kommunikation zwischen der GardenaCloud und
|
||||
Fhem her.
|
||||
<br><br>
|
||||
Wenn das GardenaSmartBridge Device erzeugt wurde, werden verbundene Geräte automatisch erkannt und in Fhem angelegt.<br>
|
||||
Von nun an können die eingebundenen Geräte gesteuert werden. Änderungen in der APP werden mit den Readings und dem Status syncronisiert.
|
||||
<a name="GardenaSmartDevicereadings"></a>
|
||||
</ul>
|
||||
Wenn das GardenaSmartBridge Device erzeugt wurde, werden verbundene Geräte automatisch erkannt und in Fhem angelegt.
|
||||
<br>
|
||||
<ul>
|
||||
<b>Readings</b>
|
||||
Von nun an können die eingebundenen Geräte gesteuert werden. Änderungen in der App werden mit den Readings und dem
|
||||
Status synchronisiert.
|
||||
<br><br>
|
||||
Bekannte Gardena-Geräte umfassen Rasenmäher, Smart Water Control, Irrigation Control, Smart Sensoren,
|
||||
Steckdosen-Adapter und Pumpe. Zeitpläne können über fhem pausiert/aktiviert werden, das Anlegen oder Löschen erfolgt
|
||||
derzeit nur über die App.
|
||||
<a name="GardenaSmartDevicereadings"></a>
|
||||
</ul>
|
||||
<br>
|
||||
<ul>
|
||||
<b>Readings (model = mower)</b>
|
||||
<ul>
|
||||
<li>battery-charging - Ladeindikator (0/1) oder mit neuerer Firmware (false/true)</li>
|
||||
<li>battery-level - Ladezustand der Batterie in Prozent</li>
|
||||
<li>battery-rechargeable_battery_status - Zustand der Batterie (Ausser Betrieb/Kritischer Batteriestand, wechseln Sie jetzt/Niedrig/oK)</li>
|
||||
<li>battery-rechargeable_battery_status - Zustand der Batterie (Ausser Betrieb/Kritischer Batteriestand,
|
||||
wechseln Sie jetzt/Niedrig/oK)</li>
|
||||
<li>device_info-category - Eigenschaft des Gerätes (Mäher/Bewässerungscomputer/Bodensensor)</li>
|
||||
<li>device_info-last_time_online - Zeitpunkt der letzten Funkübertragung</li>
|
||||
<li>device_info-manufacturer - Hersteller</li>
|
||||
@ -1571,7 +1665,8 @@ sub SetPredefinedStartPoints {
|
||||
<li>device_info-serial_number - Seriennummer</li>
|
||||
<li>device_info-sgtin - </li>
|
||||
<li>device_info-version - Firmware Version</li>
|
||||
<li>firmware-firmware_command - Firmware Kommando (Nichts zu tun/Firmwareupload unterbrochen/Firmwareupload/nicht unterstützt)</li>
|
||||
<li>firmware-firmware_command - Firmware Kommando (Nichts zu tun/Firmwareupload
|
||||
unterbrochen/Firmwareupload/nicht unterstützt)</li>
|
||||
<li>firmware-firmware_status - Firmware Status </li>
|
||||
<li>firmware-firmware_update_start - Firmwareupdate (0/1) oder mit neuerer Firmware (false/true)</li>
|
||||
<li>firmware-firmware_upload_progress - Firmwareupdatestatus in Prozent</li>
|
||||
@ -1668,36 +1763,116 @@ sub SetPredefinedStartPoints {
|
||||
</li>
|
||||
</ul>
|
||||
<br><br>
|
||||
<b>Readings (model = watering_computer)</b>
|
||||
<ul>
|
||||
<li>[tbd.]</li>
|
||||
</ul>
|
||||
<br><br>
|
||||
<b>Readings (model = ic24)</b>
|
||||
<ul>
|
||||
<li>[tbd.]</li>
|
||||
</ul>
|
||||
<br><br>
|
||||
<b>Readings (model = sensor)</b>
|
||||
<ul>
|
||||
<li>[tbd.]</li>
|
||||
</ul>
|
||||
<br><br>
|
||||
<b>Readings (model = sensor2)</b>
|
||||
<ul>
|
||||
<li>[tbd.]</li>
|
||||
</ul>
|
||||
<br><br>
|
||||
<b>Readings (model = power)</b>
|
||||
<ul>
|
||||
<li>[tbd.]</li>
|
||||
</ul>
|
||||
<br><br>
|
||||
<b>Readings (model = electronic_pressure_pump)</b>
|
||||
<ul>
|
||||
<li>[tbd.]</li>
|
||||
</ul>
|
||||
<br><br>
|
||||
<a name="GardenaSmartDeviceattributes"></a>
|
||||
<b>Attribute</b>
|
||||
<ul>
|
||||
<li>readingValueLanguage - Änderung der Sprache der Readings (de,en/wenn nichts gesetzt ist, dann Englisch es sei denn deutsch ist als globale Sprache gesetzt) </li>
|
||||
<li>model - </li>
|
||||
<li>IODev - Name des GardenaSmartBridge Devices</li>
|
||||
<li>extendedState 0|1 - [tbd.]</li>
|
||||
<li>model watering_computer|sensor|sensor2|mower|ic24|power|electronic_pressure_pump - Modell des
|
||||
GardenaSmartDevice</li>
|
||||
<li>readingValueLanguage en|de - Sprache der Readings englisch oder deutsch (default: englisch, es sei denn,
|
||||
Deutsch ist als globale Sprache gesetzt)</li>
|
||||
</ul>
|
||||
<br><br>
|
||||
<a name="GardenaSmartDeviceset"></a>
|
||||
<b>set</b>
|
||||
<b>set (model = mower)</b>
|
||||
<ul>
|
||||
<li>winter_mode - aufwäcken (awake)| winterschlaf (hibernate)</li>
|
||||
</ul>
|
||||
<ul>
|
||||
<h3>mäher</h3>
|
||||
<li>parkUntilFurtherNotice - Parken des Mähers unter Umgehung des Zeitplans</li>
|
||||
<li>parkUntilNextTimer - Parken bis zum nächsten Zeitplan</li>
|
||||
<li>startOverrideTimer - Manuelles mähen (in Minuten, 60 = 1h, 1440 = 24h, 4320 = 72h)</li>
|
||||
<li>startResumeSchedule - Weiterführung des Zeitplans</li>
|
||||
<li>startpoint enable|disable 1|2|3 - Aktiviert oder deaktiviert einen vordefinierten Startbereich</li>
|
||||
<li>parkUntilFurtherNotice - Parken des Mähers und Aussetzen des Zeitplans</li>
|
||||
<li>parkUntilNextTimer - Parken bis zum nächsten Start nach Zeitplan</li>
|
||||
<li>startOverrideTimer n - Manuelles Mähen für n Minuten (z.B. 60 = 1h, 1440 = 24h, 4320 = 72h)</li>
|
||||
<li>startResumeSchedule - Zeitplan wieder aktivieren</li>
|
||||
<li>startPoint enable|disable 1|2|3 - Aktiviert oder deaktiviert einen vordefinierten Startbereich</li>
|
||||
<ul>
|
||||
<li>set NAME startpoint enable 1</li>
|
||||
<li>set NAME startpoint disable 3 enable 1</li>
|
||||
</ul>
|
||||
<h3>irrigation control</h3>
|
||||
<li>resumeScheduleValve - Startet Bew&aauml;sserung am Ventil n nach Zeitplan</li>
|
||||
<li>stopScheduleValve - Setzt Bew&aauml;sserung am Ventil n aus (Default: 2038-01-18T00:00:00.000Z) | Optionaler Parameter Stunden (Jetzt + Stunden)</li>
|
||||
<li>closeAllValves - Stopt Bew&aauml;sserung an allen Ventilen </li>
|
||||
<h3>water control</h3>
|
||||
<li>manualButtonTime - setzt die Dauer für den manuellen Knopf (in Minuten) 0 Schaltet den Knopf aus</li>
|
||||
<li>stopSchedule - Halte Zeitplan an für x Stunden - (Default: 2038-01-18T00:00:00.000Z)</li>
|
||||
<li>resumeSchedule - Weiterführung des Zeitplans</li>
|
||||
<li>winter_mode awake|hibernate - Winterschlaf aktivieren oder Gerät aufwecken</li>
|
||||
</ul>
|
||||
<br><br>
|
||||
<b>set (model = watering_computer)</b>
|
||||
<ul>
|
||||
<li>cancelOverride - (Manuelle) Bewässerung stoppen</li>
|
||||
<li>manualButtonTime n - Bewässerungsdauer für manuellen Knopf auf n Minuten setzen (0 schaltet den Knopf aus)
|
||||
</li>
|
||||
<li>manualOverride n - Manuelle Bewässerung für n Minuten</li>
|
||||
<li>resumeSchedule - Zeitplan wieder aktivieren</li>
|
||||
<li>stopSchedule n - Zeitplan anhalten für n Stunden (Default: 2038-01-18T00:00:00.000Z, durch Gardena-App als
|
||||
"dauerhaft" interpretiert)</li>
|
||||
<li>winter_mode awake|hibernate - Winterschlaf aktivieren oder Gerät aufwecken</li>
|
||||
</ul>
|
||||
<br><br>
|
||||
<b>set (model = ic24)</b>
|
||||
<ul>
|
||||
<li>cancelOverrideValve1 - (Manuelle) Bewässerung an Ventil 1 stoppen </li>
|
||||
<li>cancelOverrideValve2 - (Manuelle) Bewässerung an Ventil 2 stoppen </li>
|
||||
<li>cancelOverrideValve3 - (Manuelle) Bewässerung an Ventil 3 stoppen </li>
|
||||
<li>cancelOverrideValve4 - (Manuelle) Bewässerung an Ventil 4 stoppen </li>
|
||||
<li>cancelOverrideValve5 - (Manuelle) Bewässerung an Ventil 5 stoppen </li>
|
||||
<li>cancelOverrideValve6 - (Manuelle) Bewässerung an Ventil 6 stoppen </li>
|
||||
<li>closeAllValves - Alle Ventile schließen</li>
|
||||
<li>manualDurationValve1 n - Ventil 1 für n Minuten öffnen</li>
|
||||
<li>manualDurationValve2 n - Ventil 2 für n Minuten öffnen</li>
|
||||
<li>manualDurationValve3 n - Ventil 3 für n Minuten öffnen</li>
|
||||
<li>manualDurationValve4 n - Ventil 4 für n Minuten öffnen</li>
|
||||
<li>manualDurationValve5 n - Ventil 5 für n Minuten öffnen</li>
|
||||
<li>manualDurationValve6 n - Ventil 6 für n Minuten öffnen</li>
|
||||
<li>resumeScheduleValve n - Zeitplan für Ventil n wieder aktivieren</li>
|
||||
<li>stopScheduleValve n m - Zeitplan für Ventil n anhalten für m Stunden (Default: 2038-01-18T00:00:00.000Z,
|
||||
durch Gardena-App als "dauerhaft" interpretiert)</li>
|
||||
<li>winter_mode awake|hibernate - Winterschlaf aktivieren oder Gerät aufwecken</li>
|
||||
</ul>
|
||||
<br><br>
|
||||
<b>set (model = sensor)</b>
|
||||
<ul>
|
||||
<li>refresh temperature|humidity|light - Sensorwert für Temperatur, Feuchtigkeit oder Helligkeit aktualisieren
|
||||
</li>
|
||||
<li>winter_mode awake|hibernate - Winterschlaf aktivieren oder Gerät aufwecken</li>
|
||||
</ul>
|
||||
<br><br>
|
||||
<b>set (model = sensor2)</b>
|
||||
<ul>
|
||||
<li>refresh temperature|humidity - Sensorwert für Temperatur oder Feuchtigkeit aktualisieren</li>
|
||||
<li>winter_mode awake|hibernate - Winterschlaf aktivieren oder Gerät aufwecken</li>
|
||||
</ul>
|
||||
<br><br>
|
||||
<b>set (model = power)</b>
|
||||
<ul>
|
||||
<li>[tbd.]</li>
|
||||
</ul>
|
||||
<br><br>
|
||||
<b>set (model = electronic_pressure_pump)</b>
|
||||
<ul>
|
||||
<li>[tbd.]</li>
|
||||
</ul>
|
||||
</ul>
|
||||
|
||||
@ -1720,7 +1895,7 @@ sub SetPredefinedStartPoints {
|
||||
],
|
||||
"release_status": "stable",
|
||||
"license": "GPL_2",
|
||||
"version": "v2.5.5",
|
||||
"version": "v2.5.6",
|
||||
"author": [
|
||||
"Marko Oldenburg <fhemdevelopment@cooltux.net>"
|
||||
],
|
||||
|
||||
@ -1,2 +1,2 @@
|
||||
UPD 2022-07-21_19:43:48 49634 FHEM/73_GardenaSmartBridge.pm
|
||||
UPD 2022-07-24_20:29:03 73628 FHEM/74_GardenaSmartDevice.pm
|
||||
UPD 2022-07-27_22:30:06 78954 FHEM/74_GardenaSmartDevice.pm
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user