CHANGED

@@ -0,0 +1 @@
+    fix lona

FHEM/73_GardenaSmartBridge.pm

@@ -414,7 +414,6 @@ sub Set {
 
     if ( lc $cmd eq 'getdevicesstate' ) {
         getDevices($hash);
-
     }
     elsif ( lc $cmd eq 'gettoken' ) {
         return "please set Attribut gardenaAccountEmail first"
@@ -438,6 +437,13 @@ sub Set {
 
         DeletePassword($hash);
     }
+    elsif ( lc $cmd eq 'debughelper') {
+      return "usage: $cmd" if ( scalar( @{$aArg} ) != 2 );
+      my $new_helper = $aArg->[0];
+      my $new_helper_value = $aArg->[1];
+      Log3( $name, 5, "[DEBUG] - GardenaSmartBridge ($name) - override helper $new_helper with $new_helper_value");
+      $hash->{helper}{$new_helper} = $new_helper_value;
+    }
     else {
 
         my $list = "getDevicesState:noArg getToken:noArg"
@@ -482,8 +488,8 @@ sub Write {
 "GardenaSmartBridge ($name) - Send with URL: $hash->{URL}$uri, HEADER: secret!, DATA: secret!, METHOD: $method"
     );
 
-#  Log3($name, 3,
+  # Log3($name, 3,
-#      "GardenaSmartBridge ($name) - Send with URL: $hash->{URL}$uri, HEADER: $header, DATA: $payload, METHOD: $method");
+  #     "GardenaSmartBridge ($name) - Send with URL: $hash->{URL}$uri, HEADER: $header, DATA: $payload, METHOD: $method");
 
     return;
 }
@@ -520,7 +526,6 @@ sub ErrorHandling {
                 1 );
 
             if ( $err =~ /timed out/ ) {
-
                 Log3 $dname, 5,
 "GardenaSmartBridge ($dname) - RequestERROR: connect to gardena cloud is timed out. check network";
             }
@@ -607,6 +612,7 @@ sub ErrorHandling {
 
     if (
         $data =~ /Error/
+        && $data !~ /lastLonaErrorCode/
         || (   defined($decode_json)
             && ref($decode_json) eq 'HASH'
             && defined( $decode_json->{errors} ) )
@@ -1577,7 +1583,7 @@ sub DeletePassword {
   ],
   "release_status": "stable",
   "license": "GPL_2",
-  "version": "v2.4.7",
+  "version": "v2.5.2",
   "author": [
     "Marko Oldenburg <fhemdevelopment@cooltux.net>"
   ],

FHEM/74_GardenaSmartDevice.pm

@@ -195,6 +195,11 @@ sub Define {
     $hash->{helper}{eco_mode_id}               = '';
     $hash->{helper}{button_config_time_id}     = '';
     $hash->{helper}{winter_mode_id}            = '';
+    # Electroni Pressure Pump
+    $hash->{helper}{operating_mode_id}         = '';
+    $hash->{helper}{leakage_detection_id}      = '';
+    $hash->{helper}{turn_on_pressure_id}       = '';
+
 
     $hash->{helper}{_id} = '';
 
@@ -294,7 +299,7 @@ sub Set {
         || AttrVal( $name, 'model', 'unknown' ) eq 'watering_computer' );
     $abilities = 'power'
       if ( AttrVal( $name, 'model', 'unknown' ) eq 'power' );
-    $abilities = 'manual_watering'
+    $abilities = 'watering'
       if ( AttrVal( $name, 'model', 'unknown' ) eq 'electronic_pressure_pump' );
 
     ### mower
@@ -355,12 +360,12 @@ sub Set {
 #$abilities['service_id'] = $hash->{helper}{SCHEDULESID}  if ( $mainboard_version > 10.30 );
     }
     ### electronic_pressure_pump
-    elsif ( lc $cmd eq 'pumptimer' ) {
+    # elsif ( lc $cmd eq 'pumptimer' ) {
-        $payload =
+    #     $payload =
-          '"name":"pump_manual_watering_timer","parameters":{"duration":'
+    #       '"name":"pump_manual_watering_timer","parameters":{"duration":'
-          . $aArg->[0] . '}';
+    #       . $aArg->[0] . '}';
-    }
+    # }
-    ### watering_computer
+    ### watering_computer & electronic pump
     elsif ( lc $cmd eq 'manualoverride' ) {
         $payload =
             '"properties":{"name":"watering_timer_1'
@@ -477,7 +482,41 @@ sub Set {
           . '","device":"'
           . $hash->{DEVICEID} . '"}';
     }
-    ### Sensors
+    ### Watering_pressure_pump
+    elsif ( lc $cmd eq 'operatingmode') {
+      my $op_mode = $aArg->[0];
+      $payload = '"settings":{"name":"operating_mode",'
+                 .'"value":"'.$op_mode.'",'
+                 .'"device":"'
+                 . $hash->{DEVICEID}.'"}';
+      $abilities = 'watering_pressure_pump_settings';
+      $service_id = $hash->{helper}->{ 'operating_mode_id' };
+    }
+    elsif ( lc $cmd eq 'leakagedetection') {
+      my $leakdetection_mode = $aArg->[0];
+      $payload = '"settings":{"name":"leakage_detection",'
+                 .'"value":"'.$leakdetection_mode.'",'
+                 .'"device":"'
+                 . $hash->{DEVICEID}.'"}';
+      $abilities = 'watering_pressure_pump_settings';
+      $service_id = $hash->{helper}->{ 'leakage_detection_id' };
+    }
+    elsif ( lc $cmd eq 'turnonpressure') {
+      my $turnonpressure = $aArg->[0];
+      $payload = '"settings":{"name":"turn_on_pressure",'
+                 .'"value":"'.$turnonpressure.'",'
+                 .'"device":"'
+                 . $hash->{DEVICEID}.'"}';
+      $abilities = 'watering_pressure_pump_settings';
+      $service_id = $hash->{helper}->{ 'turn_on_pressure_id' };
+    }
+    elsif ( lc $cmd eq 'resetvalveerrors') {
+      $payload = '"name":"reset_valve_errors",'
+                 .' "parameters": {}';
+      $abilities = 'error';
+    }
+
+    ### Sensors 
     elsif ( lc $cmd eq 'refresh' ) {
 
         my $sensname = $aArg->[0];
@@ -529,6 +568,9 @@ sub Set {
 'closeAllValves:noArg stopScheduleValve:selectnumbers,1,1,6,0,lin resumeScheduleValve:selectnumbers,1,1,6,0,lin manualDurationValve1:slider,1,1,90 manualDurationValve2:slider,1,1,90 manualDurationValve3:slider,1,1,90 manualDurationValve4:slider,1,1,90 manualDurationValve5:slider,1,1,90 manualDurationValve6:slider,1,1,90 cancelOverrideValve1:noArg cancelOverrideValve2:noArg cancelOverrideValve3:noArg cancelOverrideValve4:noArg cancelOverrideValve5:noArg cancelOverrideValve6:noArg'
           if ( AttrVal( $name, 'model', 'unknown' ) eq 'ic24' );
 
+        $list .= 'manualOverride:slider,1,1,90 cancelOverride:noArg operatingMode:automatic,scheduled leakageDetection:watering,washing_machine,domestic_water_supply,off turnOnpressure:slider,2,0.2,3.0,1 resetValveErrors:noArg'
+          if ( AttrVal( $name, 'model', 'unknown' ) eq 'electronic_pressure_pump' );
+
         $list .= 'refresh:temperature,humidity'
           if ( AttrVal( $name, 'model', 'unknown' ) =~ /sensor.?/ );
 
@@ -761,7 +803,10 @@ sub WriteReadings {
             && ( $decode_json->{settings}[$settings]{name} =~
                    /schedules_paused_until_?\d?$/
                 || $decode_json->{settings}[$settings]{name} eq 'eco_mode'
-                || $decode_json->{settings}[$settings]{name} eq 'winter_mode' )
+                || $decode_json->{settings}[$settings]{name} eq 'winter_mode' 
+                || $decode_json->{settings}[$settings]{name} eq 'operating_mode' 
+                || $decode_json->{settings}[$settings]{name} eq 'leakage_detection' 
+                || $decode_json->{settings}[$settings]{name} eq 'turn_on_pressure' )
           )
         {
             if ( $hash->{helper}
@@ -778,6 +823,14 @@ sub WriteReadings {
                     $decode_json->{settings}[$settings]{value} );
             }
 
+            # save electroni presse pump settings as readings
+            if ( $decode_json->{settings}[$settings]{name} eq 'operating_mode' 
+                || $decode_json->{settings}[$settings]{name} eq 'leakage_detection' 
+                || $decode_json->{settings}[$settings]{name} eq 'turn_on_pressure' ) {
+                readingsBulkUpdateIfChanged( $hash, $decode_json->{settings}[$settings]{name},
+                    $decode_json->{settings}[$settings]{value} );
+
+            }
             # save winter mode as reading
 
             if ( $decode_json->{settings}[$settings]{name} eq 'winter_mode' ) {
@@ -867,7 +920,6 @@ sub setState {
     # 4. Ventil manuell geoeffnet, Zeitpläne deaktiviert.
     #   App zeigt: "Wird bewässert   xx Minuten verbleibend"
     if ( AttrVal( $name, 'model', 'unknown' ) eq 'watering_computer' ){
-
          my $state_string = ReadingsVal( $name, 'watering-watering_timer_1_duration', 0 ) =~
               m{\A[1-9]([0-9]+)?\z}xms
             # offen
@@ -941,6 +993,39 @@ sub setState {
         ReadingsVal( $name, 'power-power_timer', 'no info from power-timer' ) )
       if ( AttrVal( $name, 'model', 'unknown' ) eq 'power' );
 
+    #electronic water pump
+    if ( AttrVal( $name, 'model', 'unknown' ) eq 'electronic_pressure_pump' ) {  #        | ok | pump_not_filled (Pumpe nicht gefüllt)
+         my $state_string = ReadingsVal( $name, 'watering-watering_timer_1_duration', 0 ) =~
+              m{\A[1-9]([0-9]+)?\z}xms
+            # offen
+            ? 
+              ( ReadingsVal($name, 'scheduling-schedules_paused_until', '' ) eq '' )
+              # leer ( zeitplan aktiv ... ) 
+              ? sprintf( (RigReadingsValue($hash, 'will be irrigated %.f minutes remaining.').' '.RigReadingsValue($hash, 'next watering: %s')), (ReadingsVal( $name, 'watering-watering_timer_1_duration', 0 )/60), RigReadingsValue($hash, ReadingsVal($name, 'scheduling-scheduled_watering_next_start', '')) ) 
+              # zeitplan pausiert
+              : 
+                ( ReadingsVal($name, 'scheduling-schedules_paused_until', '') eq '2038-01-18T00:00:00.000Z')
+                # pause bis  dauerhaft
+                ? sprintf( (RigReadingsValue($hash, 'will be irrigated %.f minutes remaining.').' '.RigReadingsValue($hash , 'schedule permanently paused')), (ReadingsVal( $name, 'watering-watering_timer_1_duration', 0 )/60) )
+                # naechter termin
+                : sprintf( RigReadingsValue($hash , 'paused until %s'), RigReadingsValue($hash, ReadingsVal($name, 'scheduling-schedules_paused_until', '')) )
+            # zu
+            :
+              ( ReadingsVal($name, 'scheduling-schedules_paused_until', '' ) eq '' )
+              # zeitplan aktiv
+              ? sprintf( (RigReadingsValue($hash, 'closed') .'. '.RigReadingsValue($hash, 'next watering: %s')),  RigReadingsValue($hash, ReadingsVal($name, 'scheduling-scheduled_watering_next_start', '') ) )
+              # zeitplan pausiert
+              : RigReadingsValue($hash, 'closed')
+            ;
+      # state offline | override
+      $state_string = 'offline' if ($online_state eq 'offline');
+      # check valv error, override state 
+      my $error_type = ReadingsVal( $name, 'error-valve_error_1_type', 'ok' );
+      $state_string = ( $error_type ne 'ok' ) ? $error_type : $state_string;
+  
+      readingsBulkUpdate(
+        $hash, 'state',  RigReadingsValue( $hash, $state_string ) );
+    }
     return;
 }
 
@@ -1054,6 +1139,7 @@ sub ReadingLangGerman {
         'paused until %s'                => 'pausiert bis %s',        
         'will be irrigated %.f minutes remaining.'=> 'Wird bewässert. %.f Minuten verbleibend.',
         'next watering: %s'              => 'Nächste Bewässerung: %s',
+        'pump_not_filled'                => 'Pumpe nicht gefüllt',
     );
 
     if (
@@ -1535,7 +1621,7 @@ sub SetPredefinedStartPoints {
   ],
   "release_status": "stable",
   "license": "GPL_2",
-  "version": "v2.4.3",
+  "version": "v2.5.2",
   "author": [
     "Marko Oldenburg <fhemdevelopment@cooltux.net>"
   ],

controls_GardenaSmartDevice.txt

@@ -1,2 +1,2 @@
-UPD 2022-03-29_13:42:09 49520 FHEM/73_GardenaSmartBridge.pm
+UPD 2022-05-17_20:53:29 49913 FHEM/73_GardenaSmartBridge.pm
-UPD 2022-04-12_08:40:29 61278 FHEM/74_GardenaSmartDevice.pm
+UPD 2022-05-17_11:06:17 66211 FHEM/74_GardenaSmartDevice.pm