FHEM/fhem-mirror
2
0
Fork 0
mirror of https://github.com/fhem/fhem-mirror.git synced 2025-01-31 12:49:34 +00:00
Code Issues Releases Wiki Activity
ff5d3ab768
fhem-mirror/fhem/CHANGED
betateilchen 77d817fc1f 55_weco.pm - added new module to transmit weather data to www.wetter.com 
git-svn-id: https://svn.fhem.de/fhem/trunk@5513 2b470e98-0d58-463d-a4d8-8e2adae1ed80
2014-04-12 20:49:03 +00:00

1214 lines
65 KiB
Plaintext
Raw Blame History

# Add changes at the top of the list. Keep it in ASCII, and 80-char wide.
# Do not insert empty lines here, update check depends on it.
- SVN
- added: new module 55_weco.pm (betateilchen)
- added: new module 70_Jabber.pm (BioS)
- bugfix: Dashboard: use "loadScript" for load JavaScripts
- feature: new module 00_NetzerI2C.pm, 51_Netzer.pm added (klausw)
- feature: new command reload for 57_Calendar.pm forces cleanup
- changed: small update to the documentation of recurring events in
57_Calendar.pm
- bugfix: PRESENCE: fixing wrong presence state for mode lan-ping
when device is unreachable
- feature: 10_EnOcean: new EEP profiles: D2-01-00 - D2-01-11 (VLD)
- changed: 00_TCM/10_EnOcean: learning mode (teach-in / teach-out) changed
and extended
- added: new module 10_UNIRoll.pm (c-herrmann)
- feature: cloneDummy: new attribut cloneIgnore
- feature: cloneDummy: new optional parameter [reading]
- bugfix: Dashboard: dashboard_showfullsize not applied in room "all"
- feature: new module 98_PID20.pm added (John / betateilchen)
- feature: new module 00_RPII2C.pm, 52_I2C_PCA9532.pm, 52_I2C_PCF8574.pm,
52_I2C_SHT21.pm added (klausw)
- change: module 71_LISTENLIVE.pm moved to contrib
module 23_WEBTHERM.pm moved to contrib
- change: module 98_PID.pm moved to contrib as preparation for
next major replace. Replaced by 98_PID20.pm (John/betateilchen)
- change: openweathermap: added set command "clear"
- change: MAX: interpret SetTemperature command from WT to HT
- feature: MAX: retry packets 3 times if missing an ack
- feature: new module 98_cloneDummy.pm added (Joachim)
- feature: STACKABLE_CC (busware.de device for the RPi) added
- feature: configdb export/import added for data security (betateilchen)
- feature: new module 38_netatmo.pm added (justme1968)
- change: 09_CUL_FHTTK.pm: clean up code to avoid "Use of uninitialized
value in concatenation.."
- change: 09_CUL_FHTTK.pm: extend module list to FHT80TF and FHT80TF-2
and update of documentation (matscher)
- feature: disabledForIntervals attribute added for at/notify/watchdog
- feature: jsonlist2 added, jsonlist is deprecated.
- feature: DbLog: Added new function : ReadingsVal/ReadingsTimestamp
- feature: Text2Speech: added new attribute TTS_VolumeAdjust
- feature: new module 70_PHTV.pm (loredo)
- feature: JSONMETER: added statistic functions
- feature: LightScene: added scene editor from UliM
- feature: SYSMON: New method: SYSMON_ShowValuesText
- feature: configDB.pm use sql database instead of fhem.cfg (betateilchen)
- feature: new module 98_geodata collect location based data (betateilchen)
- feature: 98_pilight: Added support for Elso protocol
- feature: readingsGroup: added sortDevices attribute
- feature: ENIGMA2: new reading 'recordings', new command record
- change: ENIGMA2: rewrite for NonBlocking
- feature: SYSMOM: new Plot + Doc
- feature: Dashboard: Custom CSS Attribute. Max. 7 Tabs.
- bugfix: Dashboard: Change Groupcontent sorting. Fix Bug that affect
new Groups.
- feature: 10_EnOcean: UTE protocol implemented
- feature: 00_TCM: new command teach
- bugfix: SYSMOM: uninitialized value warning on FritzBox
- added: 09_CUL_FHTTK.pm: german module documentation (matscher)
- feature: readingsGroup: allow FHEMWEB slider and dropdown menus as commands
- feature FB_CALLMONITOR: new attribute "disable" to
disable FB_CALLMONITOR
- feature: YAMAHA_BD: new attribute "disable" to disable cyclic status
updates of player
- change: 09_CUL_FHTTK.pm: added event-on...readings and event-min-interval
updated to reading update mechanism (matscher)
- feature: Dashboard: Groupstitel now can show icons,
Backbutton in Fullsize-Mode
- deleted: 51_BBB_WATCHDOG.pm - not really needed
- bugfix: DbLog: adding ShutdownFunction
- feature: YAMAHA_AVR: new attribute "disable" to disable cyclic status
updates of receiver
- feature: LightScene: added attribute switchingOrder
- added: new module 00_THZ.pm (immiimmi)
- added: new module 98_HTTPMOD.pm (stefanstrobel)
- added: new module 51_BBB_WATCHDOG.pm (betateilchen)
- bugfix: SYSMON: Fix: uninitialized variable
- feature: new modul 73_MPD added (Wzut)
- bugfix: SYSMON: Fix: root fs with /dev/mapper
- feature: Dashboard: The display of the dashboard can be limited to a
defined FHEMWEB. Change view of readingroups
- feature: new module 70_JSONMETER to read obis compatible data in json
format from so called smart meters for electricity, gas or heat
- feature: new modules 10_RESIDENTS, 20_ROOMMATE and 20_GUEST added (loredo)
- feature: LUXTRONIK2: attribute 'doStatistics' calculates boiler gradients
- feature: GEOFANCY: support both apps, Geofency.app and Geofancy.app
- feature: LightScene: added attribute lightSceneRestoreOnlyIfChanged
- bugfix: SYSMON: Fix: CPUTemp & BogoMIPS for utilite-Box.
- bugfix: PRESENCE: fix present-check-interval to be equal with normal
check-interval if not set in define statement and not 30 sec.
- feature: DASHBOARD: Tabs can show an icon.
- bugfix: DASHBOARD: dashboard_showfullsize only in DashboardRoom.
Fix showhelper Bug on lock/unlock. The error that after a trigger
action the curren tab is changed to the "old" activetab tab has
been fixed.
- bugfix: SYSMON: Filesystems (absent medium)
- feature: FLOORPLAN-menu-items can get icons attached by new
attribute fp_roomIcons
- feature: FLOORPLAN-specific icons can now be assigned by just
creating a folder under fhem/images with the flooplan-name
- feature: DASHBOARD: Tabs can set on top, bottom or hidden.
- bugfix: SYSMON: another format for ifconfig output
- feature: DASHBOARD: Use longpoll to update content.
rowcentercolwidth can now be defined per column.
Dashboard can hide FHEMWEB Roomliste and Header => Fullsizemode.
- bugfix: SYSMON: null reading for absent mount points
- feature: DbLog: jokers "%" in device/reading definition are now possible
- feature: SYSMON: new CPU Statistics and Plots
- feature: changed 10_OWServer.pm and 11_OWDevice.pm to use
NOTIFYDEV (justme1968)
- feature: LightScene: added setcmd command
- feature: DASHBOARD: Dashboard get Tabs. Redesign saving of Group
positioning.
- bugfix: SYSMON: Log Warnings, unnoetige Readings erkenen und entfernen
- feature: LUXTRONIK2: Setting of controller parameter and internal clock
- feature: new module 71_YAMAHA_BD.pm to control Yamaha Blu-Ray
players over network.
- bugfix: DbLog: fix for plotfork
- bugfix: SYSMON: filesystems may be wrong on some systems
- feature: new module 98_pilight.pm added (andreas-fey)
- change: LUXTRONIK2 - made compatible with current developer guidelines
(Blocking.pm, reading update mechanism)
- feature: readingsGroup: added icons and links/commands
- feature: new module 98_Text2Speech.pm added (Tobias Faust)
Google Translator Engine or ESpeak can be used
- feature: YAMAHA_AVR: define separate on and off status intervals for
cyclic status updates
- feature: Visualizations (Plots) for SYSMON added
- feature: new module 42_SYSMON.pm added (hexenmeister)
- feature: YAMAHA_AVR: new readings for radio stations, current title
and more. see commandref for more details.
- feature: new module 32_withings.pm added (justme1968)
- bugfix: PRESENCE: fixing user detection on FritzBox!
- feature: new module 38_CO20.pm added (justme1968)
- feature: new module 98_GEOFANCY.pm added (loredo)
- feature: new module 70_XBMC.pm added (dbokermann)
- feature: new module 51_RPI_GPIO.pm added (klausw)
- bugfix: Dashboard: fixed bug identification an existing Weblink.
fixed bug dashboard_sorting check. Buttonbar can now placed on
top or bottom of the Dashboard. Dashboard is always edited out
the Room Dashboard.
- bugfix: VIERA: fixed bug related to set command remoteControl
- bugfix: ENIGMA2: improved compatibility for Fritzbox and old
Webif versions
- feature: readingsGroup: process events only if visible in browser,
allow <br> for line breaks in multi-reading lines
- feature: FLOORPLAN: Style4 (S300TH specific) now keeps its formatting
even with longpoll; Text "desiredTemperature" will now
be eliminated - for MAX devices.
- feature: HCS has now MAX Thermostat support
- change: integrated OWServer/OWDevice nonblocking and random start
time patches (justme1968 & Boris)
- feature: Add new module Dashboard
- change: ONKYO_AVR: transfer command database into separate packet
ONKYOdb.pm
- feature: ENIGMA2: bouquet support e.g. for named channels
- feature: Add new module ONKYO_AVR
- feature: SYSSTAT: allow (remote) monitoring via snmp, support
for monitoring windows systems and synology system temperature
- feature: New module LINDY_HDMI_SWITCH.pm added
- change: ENIGMA2: improved logging, default attributes for webCmd and
devStateIcon
- feature: ENIGMA2: support for option channels
- feature: mailcheck: decode non ascii subjet to utf-8, verify gpg signatures
- feature: PRESENCE: "statusRequest" command for lan-bluetooth mode
(collectord >= 1.4, presenced >= 1.1 required)
- feature: PRESENCE: new collectord package
- feature: devspec: removed range, added :FILTER and more general search
- feature: HUEBridge,HUEDevice: support for groups added
- feature: YAMAHA_AVR: new argument "toggle" for mute command
- feature: FB_CALLMONITOR: replace &amp; to & at reverse search
- feature: new module 33_readingsProxy to make (a subset of) a reading
from one device available as a new device. can be used to
separate channels from 1-wire, EnOcean or SWAP multichannel
devices (by justme1968)
- change: improvements for OWDevice and OWServer (justme1968)
- feature: new attribute resolution for 1-wire temperature readings
(justme1968 & Boris)
- feature: new layout commands moveto, moveby and relative positioning
in 02_RSS.pm (Betateilchen & Boris)
- feature: FHEMWEB column attribute
- feature: new layout commands halign, valign, condition in 02_RSS.pm
(Betateilchen & Boris)
- bugfix: PRESENCE: Fix nonworking initialization in mode "lan-bluetooth"
- bugfix: fhem.pl: write-select to avoid blocking in inform/Event Monitor
- bugfix: fix issue with DST changes in 57_Calendar.pm
- feature: new module 36_LaCrosse.pm for LaCrosse IT+ temperature and
humidity sensors with a JeeLabs JeeLink as RF modem.
The matching JeeNode sketch can be found in
.../36_LaCrosse-LaCrosseITPlusReader.zip (by ohweh&justme1968)
- feature: YAMAHA_AVR: new attribute request-timeout.
- bugfix: YAMAHA_AVR: fix missing greater-than sign. Use different
Control-Tag name for RX-Vx75 series
- bugfix: PRESENCE: fixing not working re-initialization when
disabled attribute is set to 0 in lan-bluetooth mode
- feature: LightScene: added attribute lightSceneParamsToSave for
device specific configuration of </command pairs
used to save/restore device state
- feature: cmdalias added
- feature: rain Module by baumrasen
- feature: endPlotNow attribute for SVG-Plots (ChrisD)
- feature: new module 51_BBB_BMP180.pm added (betateilchen)
- feature: readingsGroup: allow devStateIcon to be displayed
- feature: readingsGroup: allow multiple device readings in one line
- feature: YAMAHA_AVR - new remoteControl commands for Tuner Preset
selection
- feature: RSS amended (read image from pipe, scaling options, line width)
- feature: WWO Module by baumrasen
- feature: plotAsPng() in 98_SVG.pm (Boris & betateilchen)
- 2013-09-29 (5.5)
- feature: new module 55_PIFACE.pm added (betateilchen)
- feature: Calendar can read from file and limit number of calendar events
retrieved in get command
- feature: new module 70_ENIGMA2.pm added (by loredo)
- change: CustomGetFileFromURL() in HttpUtils.pm now reacts to
"301 Moved Permanently" return code
- change: changed exit to POSIX::_exit in 10_OWServer.pm
- feature: new module 32_mailcheck.pm (by justme1968)
- feature: TCM: new commands added
- bugfix: TCM: TCM_ReadAnswer(): response error corrected
- feature: readingsGroup: new attribute nolinks
- feature: readingsGroup: new attribute nameIcon
- feature: readingsGroup: allow device selecton by TYPE=xxx
- feature: new module Revolt for Revolt NC-5462 power metering devices.
(by mehf)
- feature: HUEDevice: added alert command
- change: The DBLOG propagated Attribute DbLogExclude will work as
regexp to exclude defined readings to log.
If a MinInterval is set, the logentry is dropped if the
defined interval is not reached and value vs. lastvalue is eqal
- change: readingsGroup added valueFormat
- feature: new modules JeeLink and PCA301 and for the ELV PCA 301 power
meter with a JeeLabs JeeLink as RF modem. The matching JeeNode
sketch can be found in .../contrib/36_PCA301-pcaSerial.zip
(by ohweh&justme1968)
- change: PRESENCE: using ping command line utility to check presence on Windows
based machines.
- feature: install FHEM as Windows service by T.E., see docs/HOWTO_Windows.txt
- feature: new module 33_readingsGroup to display a collection of readings
from one or more devices. this will replace weblink readings.
(by justme1968)
- feature: setreading command added
- feature: DbLog: by using DbLog a new Attribute DbLogExclude will be
propagated to all Devices. DbLogExclue will work as regexp to
exclude defined readings to log
- change: loglevel attribute deprecated/replaced by the verbose attribute
- change: VIERA: changed several readings/commands according to
DevelopmentGuidelinesAV. See FHEM Wiki and commandref for more
details.
- change: YAMAHA_AVR: changed several readings/commands and introduced new
volume handling. please see the commandref for more details
- change: weblink fileplot/dbplot converted to SVG device (+FHEMWEB cleanup)
- change: VIERA: Added support for get dropdown
- change: EnOcean: Manufacturer Specific Applications (EEP A5-3F-7F),
Shutter: readings position and anglePos are updated automatically,
if command position is sent and the reading state was changed
manually to open or closed
- bugfix: EnOcean: profile MD15 now sends current temperature values
- feature: EnOcean: subtype roomSensorControl.05 (Room Sensor and Control
Unit): actor commands added
- feature: EnOcean: new sensor device Heating/Cooling Relay
- feature: EnOcean: new attr sensorMode, temperatureRefDev, humidityRefDev
- feature: EnOcean: EEP: MSC basic functions implemented (no teach-in)
- feature: EnOcean: 4BS teach-in with EEP number and Manufacturer ID
- bugfix: EnOcean: subtypes tempSensor.??: calculations corrected
- feature: new module 55_GDS.pm added (betateilchen)
- feature: HUEDevice: special svg icon for unreachable (hard switched off)
devices
- feature: FHEMWEB detail screen with get dropdown
- feature: displayattr command added
- feature: SYSSTAT: allow (remote) monitoring system uptime
- feature: new module 98_openweathermap.pm added (betateilchen)
- feature: WeatherAsHtmlH(), WeatherAsHtmlD() added to 59_Weather.pm (Boris)
- feature: new module I2C_BMP180 for reading I2C digital pressure sensor
BMP180 or BMP085 connected to Raspberry Pi (Dirk)
- feature: new module 35_SWAP_0000002200000003 for panstamp rgb led driver
board with ir and dmx support
- feature: 95_remotecontrol does not require a weblink anymore (UliM)
- feature: optional sleep parameter quiet
- feature: additional buttons for use with 95_remotecontrol
- feature: new module 71_LISTENLIVE.pm for use with media players
(betateilchen)
- feature: use xhr for colorupdates by colorpicker and rgb presets
- feature: new module 34_SWAP for generic SWAP protocoll support using
a panStick and 34_panStamp as IODevice (by justme1968)
- feature: new module 34_panStamp to use a panStick as a RF modem
for panStamps using the SWAP protocoll (by justme1968)
- feature: EGPM2LAN module added for Gembird (R) Energenie LAN Support
- feature: FHEMWEB use widget module to update colorpicker in longpoll
- feature: FHEMWEB widget (slider/etc) javascript handler modularized
- feature: FHEMWEB longpoll in multiple browserwindows
- feature: fhem.pl: version command added
- feature: LightScene: add html overview of all configured scenes in
detail view. allow usage of overview in a weblink.
- feature: FLOORPLAN: enhanced detail-screen for floorplans in fhemweb,
arrange-mode has delete-button, new command
"get <floorplan-name> config"
- feature: readings type added to weblink (justme1968)
- feature: offset and monotonic added to userReadings modifier (justme1968)
- feature: HUEDevice: support SVG icons for LWB001 living whites bulb
- feature: HUEDevice: support more than one bridge
- feature: updateInBackground global attribute
- feature: SYSSTAT: allow stateFormat
- feature: Module 70_VIERA supports now module 95_remotecontrol with own
layout for VIERA TV
- feature: InternalVal function added (like ReadingsVal)
- feature: new module speedtest to monitor internet connection speed with
speedtest-cli
- feature: new module "remotecontrol" to display a graphical remotecontrol
for any device
- feature: HUEDevice: new attribute color-icons to colored svg icons
- feature: FHEMWEB: longpoll is default now, longpollSVG (default off) added
- feature: HUEDevice: allow usage of openautomation svg icons
- feature: FHEMWEB: svg icons / iconPath / www/images/openautomation added
- feature: FHEMWEB: SVGcache attribute & clearSvgCache set command added
- feature: SYSSTAT: allow (remote) monitoring raspberry pi on cpu frequency
- feature: MANTAINER.txt added
- feature: PRESENCE: new mode "shellscript" to use own
scripts or binaries for presence recognition
- feature: YAMAHA_AVR: new set command to select scenes
- feature: PRESENCE: new attribute ping_count
- feature: userReadings may have a filter
- feature: HUEBridge: allow starting of bridge firmware update
- change: EnOcean: profile PM101 changed, old profiles FAH, FBH, FTF, SR04
removed
- feature: TCM: new attr blockSenderID:
Block receiving telegrams with a TCM SenderID sent by repeaters
- feature: TCM: For TCM120 Transceiver now the transmission of RPS and 4BS
commands supported
- feature: EnOcean: Now all RPS / 1BS profiles, more than 90 4BS profiles and
some manufacturer specific profiles are supported
- feature: EnOcean: profiles (subType) are updated from EEP 2.1 to EEP 2.5
- feature: FHEMWEB attribute roomIcons added
- feature: SYSSTAT: optionaly calculate geometric average of last 4
temperature values
- feature: weblink details screen can be used to edit .gplot files
- feature: eventTypes module added, to help with FileLog details screen
- feature: FB_CALLMONITOR: new reverse search provider dasschnelle.at for
reverse search of austrian telephone numbers
- bugfix: event-on-change-reading in combination with event-change-interval
- change: HUEDevice: allow color preset buttons in webCmd
- feature: SYSSTAT: allow (remote) monitoring raspberry pi on chip temperature
- feature: HUEDevice: use webCmdFn for colorpicker
added jscolor for colorpicker
- feature: FHEMWEB: module specific summaryFn/detailFn + defineable webCmdFn
- change: ESA2000: adapted device detection , rename readings
- change: stucture triggers on each change, see event-on-change-reading
- feature: PRESENCE: new mode "function" to use own perl functions for
presence checks
- bugfix: fixing not-working FHEM restart, when a PRESENCE check is running
- bugfix: fixing memory overflow when "list" a PRESENCE definition
- bugfix: fixing dead PRESENCE definitions in case of timeouts
- bugfix: update: error while updating single files fixed. (M. Fischer)
- 2013-04-08 (5.4)
- feature: updatefhem will be silently converted to update
- feature: FHEMWEB: save button replaced with the menu entry "Save config"
- feature: notify supports $NAME/$EVENT/$EVTPART0/etc. @/% is deprecated.
- feature: 93_DbLog extended to give more functions for the charting frontend.
This includes new queries for raw table data and also statistics,
which get sum/max/min/avg values from the database.
Documentation has been updated.
- feature: new module 31_LightScene to save and restore the state of a
group of lights and other actors
- feature: VIERA module added (by teevau)
- change: FHEMWEB: the first webCmd argument is no longer used by the
state-icon, this can be implemented by the new devStateIcon
- change: 30_HUEDevice: allow autodetection of bridge with hue portal
services
- feature: THRESHOLD Module by Damian
- change: 30_HUEDevice: use new devStateIcon feature to show device color
in room overview
- feature: added example Setup SQL and configuration for SQLite
- change: modified MySQL Setup SQL to use 512 characters in EVENT column
- feature: added new Javascript Frontend based on ExtJS (by Johannes)
- feature: new modules 30_HUEBridge and 31_HUEDevice for phillips hue and
smartlink devices (by justme1968)
- change: SYSSTAT: allow remote monitoring by ssh
- change: SYSSTAT: allow less frequent updates for diskusage
- feature: new module 32_SYSSTAT to monitor system load and disk usage
on linux FHEM hosts (by justme1968)
- feature: new Module 73_PRESENCE to make automatic presence detection of
mobile phones or other mobile devices (like tablets) via ping or
bluetooth checks (by M. Bloch)
- feature: new Module 98_Heating_Control to switch heatsinks automaticly
with a weekly profile (by D. Ortmann / T. Faust)
- feature: new Module 93_DbLog.pm for logging events into Databases.
Generating Plots with weblinks are supportet.
(by B. Neubert / T. Faust)
- feature: new Module 59_HCS.pm for monitoring heating valves (FHT, HM-CC-VD)
to contral a central heating unit. I thank Benjamin for his
support! (M. Fischer)
- feature: new Module 72_FB_CALLMONITOR for receiving telephone call events
(Markus)
- feature: new Module 71_YAMAHA_AVR.pm for controlling Yamaha AV receivers
over network (by Markus)
- feature: optional second parameter to fhem() to make it silent
- feature: autoloading commands, XmlList/etc renamed from 99 to 98.
- feature: FHEMWEB returns external files in chunks to save memory
- feature: commandref.html splitted: documentation is now appended to the
modules.
- change: introduced readingsBulkUpdate, readingsSingleUpdate
- change: added GPLv2 licensing information
- feature: FLOORPLAN added fp_setbutton attribute
- bugfix: FHEMWEB slider with min > 0
- change: FHEMWEB CORS moved to options
- change: FHEMWEB closing old TCP connections
- change: FHEMWEB added "Associated with" to detail-screen (Uli)
- change: FHEMWEB added ETag headers (Matthias)
- change: FHEMWEB devStateIcon added
- change: HOWTO auf deutsch (ilmtuelp0815)
- change: 98_update.pm due a (probable) bug in perl, modules are no longer
loading automatically. A restart is required now! (M. Fischer)
- feature: 98_update.pm saves the statefile before an update (M. Fischer)
- feature: FHEMWEB longpoll reconnect (Matthias)
- bugfix: rename may overwrite other devices
- feature: FLOORPLAN longpoll (Matthias)
- feature: support for recurring events added in 57_Calendar.pm (Boris)
- feature: added support for OWL CM119,CM160 and CM180, energy sensors in
TRX_WEATHER using RFXtrx433 (Willi Herzig)
- feature: added support for KD101 smoke sensor (also set alert and pair) in
TRX_SECURITY using RFXtrx433 (Willi Herzig)
- change: changed dewpoint to work with event-on-change-reading and
technoline TX3TH (Willi Herzig)
- feature: new command fheminfo. Shows system informations. (M. Fischer)
- feature: added support for UV sensors in TRX_LIGHT using RFXtrx433 (Willi
Herzig)
- feature: added on-till and on-timer for set in TRX_LIGHT using RFXtrx433
(Willi Herzig)
- feature: generate devices with hexcodes as state for unknown types in
TRX_ELSE using RFXtrx433 (Willi Herzig)
- feature: new modules 10_OWServer.pm and 11_OWDevice.pm to interface with
OWFS
- feature: stateFormat (readingsFn modules) and showInternalValues attributes
- feature: new readingsFn modules: FS20 CUL_WS HMS CUL_EM CUL_TX EnOcean ZWave
- change: BS, USF1000, ECMDDevice, Weather, dummy migrated to readingsFN
(Boris)
- feature: telnet client mode
- bugfix: FHEMWEB longpoll misses initial state change (HM: set_on vs. on)
- change: 20_OWFS.pm, 21_OWTEMP modules flagged as "deprecated". These
modules will be removed in a future release. Use OWServer /
OWDevice instead. (M. Fischer)
- feature: a lot of new features and known 1-wire slaves to OWServer /
OWDevice added (M. Fischer)
- feature: set-extensions (additional set commands) for FS20, EnOcean, ZWave
- feature: added new command 'notice'. (M. Fischer)
- change: update supports the display and confirmation of system messages
via the new notice command (M. Fischer)
- feature: added new set commands and basicauth to 49_IPCAM.pm (M. Fischer)
- feature: userReadings
- feature: average supports more than one value in combined readings (T:x H:y)
- feature: FHEMWEB serves arbitrary files from the www directory
- feature: FB_checkPw now works with a distinct fritzbox user
- bugfix: floorplan-correction for readings with longpoll. Requires local
change in css!
- feature: floorplan added js-extension from Dirk
- feature: hour resolution in SVG
- feature: ZWave support for MULTI_CHANNEL class
- feature: FHEMWEB: old-dir-support removed, image-indexing rebuilt,
smallscreen/touchpad moved to stylesheetPrefix, menuEntries
added, Extend devStateIcon, js setting of attr values in detail
screen, live slider update in detail and room view
- feature: added support for third-party packages to 98_update.pm (M. Fischer)
- feature: FBAHA/FBDECT for FRITZ!DECT devices
- feature: event-min-interval Attribute
- 2012-10-28 (5.3)
- feature: added functions trim, ltrim, rtrim, UntoggleDirect,
UntoggleIndirect
- feature: added functions FB_mail, FB_WLANswitch
- rework: CUL_HM reworks with respect to protocol. additions for several
devices and commands
- feature: rfmode supports to listen to MAX if fw>1.46, 00_CUL.pm (Jens)
- feature: Status and length on cmdStack in webinterface for 10_CUL_HM
- feature: devicepair in 10_CUL_HM.pm supports unset
- feature: devicepair for single Button in 10_CUL_HM.pm (by MartinP)
- feature: new Modules 75_MSG.pm, 76_MSGFile.pm and 76_MSGMail.pm (by
Ruediger)
- feature: new Module 59_Twilight.pm to calculate current daylight
- feature: internal NotifyOrderPrefix: 98_average.pm is more straightforward
- feature: the usb command tries to flash unflashed CULs on linux
- feature: FHEMWEB: jsonp support, .holiday and .cfg added to Edit Files
- feature: SVG: filled area support, some ls/lw fixes
- feature: WOL (wake on lan) module added (by Matthias)
- feature: additional groups from /etc/groups are applied (Christopher)
- feature: updatefhem backup is using tar+gzip now
- feature: EIB: introduce Get, interpret received values upon defined model
(by datapoint types) (Maz)
- feature: NetIO230B module by Andy
- feature: Retaining configfile comments (not within a define statement)
- feature: EnOcean PM101 by Ignaz
- feature: FHEMWEB redirectCmds attribute added
- feature: CUL_TX minsecs attribute (by Arno)
- feature: webCmd in smallScreen added
- feature: TRX modules by Willi
- feature: FHEMWEB icons (by Joerg)
- feature: FHEMWEB console (same as inform timer)
- feature: remove dependency on Google::Weather, major rewrite (Boris)
- feature: started experimental interface implementation (fhem API v2)
(Boris)
- feature: sleep issued in at/notify/etc is not blocking fhem anymore
- feature: dummy got a setList attribute
- feature: new module 02_RSS.pm
- feature: at attribute alignTime added
- feature: FHEMWEB attribute values via dropdown, slider for dimmer
- feature: new attribute group for FHEMWEB (Boris)
- change: 11_FHT.pm, 50_WS300.pm, 59_Weather.pm migrated to readingsUpdate
mechanism (Boris)
- change: 59_Weather.pm migrated from Google to Yahoo Weather API (Boris)
- change: updatefhem modifications to support a clean install of fhem and
pgm2 installation, see commandref.html (M. Fischer)
- change: FHEMWEB support for the new www/pgm2 directroy added (M. Fischer)
- change: Makefile support for for the new www/pgm2 directroy and new
targets backup and uninstall added. More verbose output. (M. Fischer)
- change: backup separated from updatefhem to a new command (M. Fischer)
- feature: new command backup added (M. Fischer) new global attribute
<backupsymlink> added new global attribute <backupcmd> added new global
attribute <backup_before_update> added
- feature: new module 57_Calendar.pm (Boris)
- feature: new parameter <changed> for updatefhem added (M. Fischer) new
global attribute <exclude_from_update> added (M. Fischer)
- feature: optional telnet password added / telnet port is optional
- feature: holiday returns all matches, not only the first.
- change: CULflash separated from updatefhem to a new module (M. Fischer)
- feature: time and internet helper routines added to fhem.pl (Boris)
- change: separating common functions used by the FHEM modules into
*Utils.pm files from fhem.pl
- feature: portpassword and basicAuth may use evaluated functions
- feature: motd with SecurityCheck added
- feature: telnet module added, attr global port moved. allowfrom changed.
- feature: FhemUtils/release.pm for the new update process added. (M.
Fischer)
- bugfix: correct one-time relative at commands after reboot
- feature: ZWave added
- feature: module IPCAM added. (M. Fischer)
- feature: module HTTPSRV added (Boris)
- feature: module FLOORPLAN added (Uli Maass)
- bugfix: FHEMWEB: weblink with group attribute is shown together with other
elements
- feature: FHEMWEB: timepicker added
- feature: FHEMWEB: support for modul specific icons added (M. Fischer)
- 2011-12-31 (5.2)
- bugfix: applying smallscreen attributes to firefox/opera
- feature: CUL_TX added (thanks to Peterp)
- feature: TCM120/TCM310 + EnOcean parser added
- feature: eventMap enhanced
- bugfix: enabled logging for 59_Weather.pm (Boris)
- feature: language selection for 59_Weather.pm (Erwin)
- feature: .gplot files renamed from type to content
- bugfix: FS20 on-for-timer error reporting only in the logfile
- bugfix: FHEM2FHEM should work with CUL again, after syntax change
- feature: CUL directio mode (No Device::SerialPort needed)
- feature: FritzBox 7270 ZIP file
- bugfix: prevent fhem from stalling if telnet times out in 66_ECMD.pm
- feature: added postproc ability to classdef in 66_ECMD.pm (Boris, Heinz)
- feature: FHEMWEB longpoll mode, small fixes, tuned smallscreen mode
- feature: average module added
- change: moved the berliOS CVS repository to a sourceforge SVN repository
- feature: all FHEM modules have now a subversion id.
- bugfix: new perl compiled for the FritzBox 7270
- feature: regexp1WontReactivate Attribute added
- bugfix: XmlList special handling
- bugfix: CUL_WS rain sensor corr1 fix
- feature: FHEMWEB stylesheet attribute repaced with stylesheetPrefix
- feature: notify attribute forwardReturnValue
- change: move JsonList from contrib to main-modules
- change: JsonList output optimized and more structured
- feature: FHEMWEB save button, smallscreen first screen fix
- feature: FHEMWEB encoding is now UTF-8, alias attribute is respected
- change: HTTPS certs directory moved from cwd into modpath
- feature: shutdown parameter restart added
- feature: usb scan/create command added (part of autocreate).
- feature: SaveAs added to FHEMWEB Edit-Files
- feature: EnOcean ElTako dimmer by Marc.
- feature: fhem is started as user fhem on the FB7390
- 2011-07-08 (5.1)
- feature: smallscreen optimizations for iPhone
- feature: FHT8V rewrite (and moved from contrib into the FHEM directory).
- feature: PID rewrite (and moved from contrib into the FHEM directory).
- feature: FHEM2FHEM module
- bugfix: CUL get should not digest foreign events (fhtsoftbuffer)
- bugfix: S300TH sanity check won't allow negative temperatures.
- feature: decode CUL uptime
- feature: USB doc changes, FHZ initFS20_02/stopHMS parameters by Andreas.
- feature: CUL_HM for some HomeMatic devices.
- bugfix: HTML-Syntax check of the pgm2 output and documents (*.html)
- feature: added date alias for FHT80b (Boris)
- feature: attr may be a regexp (for CUL_IR)
- feature: Homepage moved from koeniglich.de/fhem to fhem.de
- feature: eventMap attribute
- feature: 64_ESA2000 added (by STefan/Gerd)
- feature: new modules 66_ECMD.pm and 67_ECMDDevice.pm for ethersex-enabled
devices and alike.
- bugfix: serial port setting on Linux broken if running in the background
- feature: IPV6 support, FHEMWEB basicAuth and HTTPS support
- feature: createlog added to the autocreate module
- feature: contrib/tcptee.pl added
- feature: HMLAN support
- feature: Fritzbox7390 image
- feature: pgm2 tablet support, included into the default configuration
- feature: TUL/EIB Support (by Maz)
- feature: updatefhem/CULflash
- feature: $value{} => Value(), $oldvalue => OldValue()/OldTimestamp()
- 2010-08-15 (5.0)
- **NOTE*: The default installation path is changed to satisfy lintian
- feature: KM271
- bugfix: 99_SUNRISE_EL endless loop bug
- feature: CUL: optional baudrate spec in definition
- feature: CUL: sendpool attribute
- feature: CUL_HOERMANN module added
- bugfix: DST change: absolute at and relative sunrise fix
- feature: FHEMWEB javascript additions for SVG plots (click on lines/labels)
- feature: FHEMWEB smallscreen attribute (for smartphones)
- bugfix: the internal fhem() used in perl oneliners does not return a value
- feature: Dimmer function of X10 module changed to match FS20
- feature: allow only meaningful readings (fill level > -5%) in USF1000
- feature: device attr links in commandref.html
- bugfix: make BS known to CUL to avoid lost messages if both FHZ1300 and CUL
are connected, adjust matching rule
- feature: Copy&Paste in SVG
- feature: Debian/Ubuntu Package. Install-path changes to satisfy lintian
- feature: Allnet 3076/4027/4000T
- feature: RFXCOMM Module for Oregon Weatherstations
- feature: Davis VantagePro2
- feature: ELV USB-WDE1
- feature: addvaltriggers CUL attribute for adding RSSI as a trigger
- feature: CUL_WS sanity check for large temp differences.
- 2010-03-13 (4.9)
- bugfix: changed the fhem prompt from FHZ> to fhem>
- bugfix: CUL_RFR fixes (chaining RFR's should work)
- bugfix: Path in the examples fixed (got corrupted)
- bugfix: PachLog fixes from Axel
- bugfix: HOWTO/Examples revisited for correctness
- bugfix: INITIALIZED, DEFINED, RENAMED, DELETED triggers
- feature: image weblinks from Stefan
- feature: OWFS support for passive Devices e.g. DS9097 (see commandref.html)
- bugfix: OWFS crash fhem with PGM2/3, xmllist (M.Fischer)
- bugfix: OWTEMP Defining a device without OWFS now fails (M.Fischer)
- bugfix: 21_OWTEMP.pm missing trigger fo notify/filelog (M.Fischer)
- feature: 99_getstate.pm get state from S555TH now (M.Fischer)
- feature: pgm3: automatic support for CUL_WS (S300TH) added (MartinH)
- bugfix: 21_OWTEMP.pm missing space within state logging (M.Fischer)
- bugfix: 21_OWTEMP.pm interval fixed (M.Fischer)
- bugfix: 21_OWTEMP.pm rewrite with errorcontrol and demo mode (M.Fischer)
- feature: ignore attribute
- bugfix: [pgm3] table-format on Android-Browser optimized
- feature: [pgm3] Skinable - change the colors.
- feature: [pgm3] Rooms possible for Webcam and Google-Weather
- bugfix: dummy/structure was listed twice in list and xmllist
- feature: 11_FHT.pm added new readings for warnings on battery, lowtemp,
window and windowsensor (M.Fischer)
- feature: autocreate.pm (create undefined RF devices, logs and plots)
- feature: on-for-timer added for X10 modules (Boris)
- bugfix: pgm3: Better check of availability of google-weather (MartinH)
- feature: pgm3: DBLog added for everything except UserDefs
(Gerhard Pfeffer / MartinH)
- feature: pgm2 style changes, SVG in background, optional compression
- 2009-11-28 (4.8)
- bugfix: loosing data when sending FS20 messages in a group
- bugfix: better handling of disconnected CUN
- feature: softfhtbuffer added to CUL
- bugfix: pgm3: Pulldown-Menu FHTDEV with error-check (MartinH)
- feature: duplicate buffer added for multi-cul/-fhz setups
- feature: 20_OWFS.pm for 1-Wire via OWFS added (Martin Fischer)
- feature: 21_OWTEMP.pm for 1-Wire Digital Thermometer added (Martin Fischer)
- feature: CUL_FHTTK from Kai
- feature: pgm3: Google-Weather, Battery-Check, Log-View added (MartinH)
- feature: CUL_RFR (RF_ROUTING) added
- feature: Command save retains now the order of the old config file
- feature: List parameter added (list .* RFR_MSGCNT)
- 2009-10-23 (4.7)
- bugfix: Reattached corrupted CUL device caused uninitialized message
- bugfix: CUL/HMS changes, HMS cleanup
- bugfix: EM/EMWZ/EMGZ set changed to work in FHEMWEB
- bugfix: Avoid unitialized in xmllist for corrupt readings, reporter Boris
- bugfix: Add binmode to 01_fhemweb.pm for windows
- bugfix: Uniform check for windows, enable CUL for windows.
- bugfix: CUL/HMS parsing patches from Peter
- bugfix: Fixes for Windows by Klaus
- bugfix: Another "rereadcfg" bugfix
- feature: Update to the current (1.27) CUL FHT interface
- feature: suppress inplausible readings from USF1000
- feature: get time, fwrev, set reopen for CM11 (Boris 2009-09-12)
- bugfix: FHZ_ReadAnswer bugfix for Windows (Klaus, 20.8.2009)
- feature: CUL: device access code reorganized, TCP/IP support added (CUN)
- feature: Pachube module from Axel
- feature: dumpdef module from Axel in contrib
- feature: javascripting support in FHEMWEB (Klaus/Axel)
- feature: Module 09_BS.pm for brightness sensor added (Boris 2009-09-20)
- 2009-07-03 (4.6)
- bugfix: fht actuator message clarification by Klaus
- feature: getstate command from Martin (25.12)
- bugfix: at drifts for relative timespecs
- bugfix: Add IODev to CUL/EM/CUL_WS/HMS/KS300
- bugfix: FileLog get (pgm2 plots) wont find the first row in the file
- feature: 00_CUL: Answer CUR requests (status/time/fht)
- bugfix: support for second correction factor for EMWZ in 15_CUL_EM added
- feature: CUL further sets/gets added
- feature: Removed msghist for multiple FHZ handling, IODev attribute added
- bugfix: cut off string "(counter)" from fallback value in 13_KS300.pm
- feature: daily/monthly cumulated values for EMWZ/EMGZ/EMWM with 15_CUL_EM
- feature: 01_FHEMWEB.pm: multiple room assignments
- feature: 01_FHEMWEB.pm: fixedrange with optional [day|week|month|year]
- feature: 01_FHEMWEB.pm: attr title and label for flexible .gplot files
- feature: fhem.pl: attr global logdir used by wildcard %ld
- feature: do not block on disconnected devices (FHZ/CM11/CUL)
- bugfix: deleting at definition in the at command
- bugfix: deleting a notify/at/watchdog definition in a notify/at/watchdog
- feature: devspec <attr>=<value>. E.g. set room=kitchen off; list disabled=
- feature: Common Module calling for CUL/FHZ/CM11
- feature: Store CUL sensitivity info
- feature: avoid the "unknown/help me" message for unloaded devices
- feature: structure module for large installations
- feature: Cost Control in 15_CUL_EM (CostPerUnit, BasisFeePerMonth)
- feature: add counter differential per time in 81_M232Counter.pm
- feature: added USB compendium to documentation
- feature: pgm3: Documentation for pgm3 updated, HMS100CO added (and bugfix)
- bugfix: Defining a repeated at job in a sunrise/sunset at job fails
- bugfix: FHT "summer" fix (avoiding a lot of syncnow)
- feature: FHEMWEB modules added
- feature: holiday module + doc + example + holiday2we attribute
- bugfix: sunrise stuff fixed, doc missing
- feature: CUL FHT sending added
- bugfix: workaround to make M232 counter wraparound
- feature: sequence module added
- feature: Google Weather API support for FHEM (Boris 2009-06-01)
- feature: lazy attribute for FHT devices (Boris 2009-06-09)
- feature: tmpcorr attribute for FHT devices
- feature: CUL_EM generates an event for each of the READINGS
- feature: USF1000S support for FHEM added (Boris 2009-06-20)
- feature: CUL supports HMS (culfw >= 1.22 needed)
- feature: CUL shutdown procedure added
- feature: 14_CUL_WS: better error checking
- bugfix: webpgm2 multi line editing is working again
- 2008-12-23 (4.5)
- bugfix: further 01_FHEMWEB cleanup
- feature: CUL support for FS20(r/w), FHT(readonly), KS300 and EM
- feature: command list outputs the device attributes too
- bugfix: rename bugs fixed
- bugfix: better integration of ReadyFn (Windows), slight overall speedup
- bugfix: Ignore/correct casing when autoloading modules
- bugfix: at is executed twice after a modify (rufus99, 2008-09-10)
- feature: FHT internal modifications (better protocol understanding)
- feature: add timestamp to inform
- feature: The strange stty settings in 00_FHEM.pm are optional
- bugfix: webpgm2 iPhone fix
- feature: fullinit and reopen commands for FHZ added (Boris 2008-11-01)
- bugfix: undefined NotifyFn in fhem.pl (Boris 2008-11-01)
- feature: new modules 00_CM11.pm and 20_X10.pm for integration of X10
devices in fhem (Boris 2008-11-02)
- feature: X10 support for pgm3 (Boris 2008-11-02)
- bugfix: FHT short message warning
- bugfix: rereadconfig crashes with active webpgm2 connections (2008-11-13)
- bugfix: watchdog crash (2008-11-15)
- bugfix: Strange call for nonexistent MyCUL: ReadFn
- feature: webpgm2: gplot output goes to /tmp/gnuplot.err
- feature: devspec TYPE,DEF,STATE. e.g. list TYPE:FS20, set DEF:123 on
- bugfix: at schedules 2 events after the DST change (fix not verified)
- feature: commandref.html reorg. There are now device sections.
- feature: CUL / CUL_EM / CUL_WS documentation
- feature: do not block fhem when the CUR is disconnected
- bugfix: correct correction factors for EMEM in 15_CUL_EM.pm
- bugfix: more stable CUL initialization
- feature: reworked 15_CUL_EM.pm to account for timer wraparounds, more
readings added
- feature: speed gain through disabled refreshvalues query to all FHTs at
definition; if you want it back at a "set myFHT report1 255
report2 255" command to the config file.
- feature: fhem commands may be added in modules. XmlList is external now.
- bugfix: rereadcfg from webpgm2 does not crash fhem.pl
- feature: jsonlist command from Martin (contrib/JsonList)
- feature: contrib/rotateShiftWork from Martin
- feature: contrib/fhem2speech from Martin
- bugfix: attributes of at devices disappear
- feature: attribute rainadjustment for KS300 (Boris 2008-12-17)
- bugfix: deleting at / watchdog while active creates an empty device
- feature: ExactId trigger added for wildcard HMS devices
- 2008-08-04 (4.4)
- feature: RM100-2 battery empty warning (mare 23.07.08)
- feature: optimising the pgm2/SVG memory usage
- feature: autoloading FHEM modules
- bugfix: STATE/$value is carrying again the correct value
- feature: enhancing the Makefile and the documentation
- feature: 90_at is using now InternalTimer, subsecond precision added
- feature: HMS100-FIT added (01.01.08 by Peter and 22.01.08 by Juergen)
- feature: 91_watchdog added to handle the HMS100-FIT
- feature: cum_kWh/cum_m3 added to EMWZ/EMGZ (11.01.08 by Peter)
- 2008-07-12 (4.3)
- bugfix: KS300 state was wrong after the STATE bugfix
- feature: HMS100CO (by Peter)
- feature: EMGZ (by Peter)
- feature: Generate warning if too many commands were sent in the last hour
- doc: linux.html: Introduction (Peter S.)
- feature: contrib/82_M232Voltage.pm (by Boris, 24.12)
- feature: delattr renamed to deleteattr (Rudi, 29.12)
- feature: defattr renamed to setdefaultattr (Rudi, 29.12)
- feature: device spec (list/range/regexp) for most commands implemented
- feature: %NAME, %EVENT, %TYPE parameters in notify definition
- feature: added 93_DbLog.pm, database logging facility (Boris, 30.12.)
- feature: webfrontend/pgm2 converted to a FHEM module
- bugfix: 99_SUNRISE_EL.pm: may schedule double events
- bugfix: 62_EMEM.pl, contrib/em1010.pl: correct readings for energy_kWh
and energy_kWh_w (Boris, 06.01.08)
- feature: global attr allowfrom, as wished by Holger (8.1.2008)
- feature: FHT: multiple commands, softbuffer changes, cmd rename, doc
- feature: EM1010PC: automatic reset
- feature: contrib/00_LIRC.pm (25.3, by Bernhard)
- bugfix : 00_FHZ: additional stty settings for strange Linux versions
- bugfix : pgm2 wrong temp summary for FHT's (reported by O.D., 16.4.2008)
- feature: FHEM modules may live on a filesystem with "ignorant" casing (FAT)
- feature: FileLog "set reopen" for manual tweaking of logfiles.
- feature: multiline commands are supported through the command line
- feature: pgm2 installation changes, multiple instances, external css
- feature: 87_ws2000.pm (thomas 10.05.08)
- contrib: ws2000_reader.pl Standalone decoder and server (thomas 10.05.08)
- doc: update fhem.html and commandline.html reflecting ws2000 and
windows installation(thomas 10.05.08)
- feature: add ReadyFn to fhem.pl in main loop to have an alternative for
select, which is not working on windows (thomas 11.05)
- feature: set timeout to 0.2s, if HandleTimeout returns undef=forever
- bugfix : WS2000:fixed serial port access on windows by replacing FD with
ReadyFn
- bugfix : FileLog: dont use FH->sync on windows (not implemented there)
- feature: EM, WS300, FHZ:Add Switch for Device::SerialPort and
Win32::SerialPort to get it running in Windows (sorry, untested)
- bugfix: FileLog undefined $data in FileLog_Get
- feature: fhem.pl check modules for compiletime errors and do not initialize
them
- feature: M232 add windows support (thomas 12.05.08)
- feature: add simple ELV IPWE1 support (thomas 12.05.08)
- feature: FileLog get to read logfiles. Used heavily by webpgm2
- feature: webpgm2: gnuplot-scroll mode to navigate/zoom in logfiles
- bugfix: deleting FS20 device won't result in unknown device (Daniel, 11.7)
- feature: webpgm2 generates SVG's from logs: no need for gnuplot
- bugfix: examples corrected to work with current syntax
- 2007-12-02 (4.2)
- feature: added archivedir/archivecmd to the the main logfile
- feature: 99_Sunrise_EL.pm (does not need any Date modules)
- bugfix: seldom xmllist error resulting in corrupt xml (Martin/Peter, 4.9)
- bugfix: FHT mode holiday_short added (9.9, Dirk)
- bugfix: Modifying a device from its own trigger crashes (Klaus, 10.9)
- feature: webpgm2 output reformatted
- feature: webpgm2 displaying multiple plots
- feature: FHT lime-protection code discovered by Dirk (7.10)
- feature: softwarebuffer for FHT devices (Dirk 17.10)
- feature: FHT low temperatur warning and offset (Dirk 17.10)
- change: change FHT state into warnings (Dirk 17.10)
NOTE: you'll get an undefined type state &
undefined type unknown_85 after upgrade.
- feature: Softwarebuffer code simplified (Rudi 22.11)
- bugfix: bug #12327 doppeltes my
- bugfix: set STATE from trigger
- bugfix: readings state vs STATE problem (xmllist/trigger)
- change: SUNRISE doc changed (99_SUNRISE.pm -> 99_SUNRISE_EL.pm)
- feature: support for the M232 ELV device (Boris, 25.11)
- feature: alternativ Quad-based numbers for the FS20 (Matthias, 24.11)
- feature: dummy type added (contrib/99_dummy.pm)
- 2007-08-05 (4.1)
- doc: linux.html (private udev-rules, not 50-..., ATTRS)
- bugfix: setting devices with "-" in their name did not work
- doc: fhem.pl and commandref.html (notifyon -> notify, correction
of examples)
- feature: modify command added
- feature: The "-" in the name is not allowed any more
- bugfix: disabled notify causes "uninitialized value" (STefan, 1.5)
- bugfix: deleted FS20 items are still logging (zombie) (Gerhard, 16.5)
- bugfix: added FS20S8, removed stty_parmrk (Martin, 24.5)
- feature: added archivedir/archivecmd to the FileLog
- feature: added EM1010PC/EM1000WZ/EM1000EM support
- bugfix: undefined messages for unknown HMS devs (Peter, 8.6)
- bugfix: em1010 and %oldvalue bugs (Peter, 9.6)
- bugfix: SCIVT solar controller (peterp, 1.7)
- bugfix: WS300 loglevel change (from 2 to 5 or device specific loglevel)
- feature: First steps for a Fritz!Box port. See the fritzbox.html
- 2007-04-14 (4.0)
- bugfix: deny at +{3}... (only +*{3} allowed), reported by Bernd, 25.01
- bugfix: allow numbers greater then 9 in at +{<number>}
- feature: new 50_WS300.pm from Martin (bugfix + rain statistics, 26.01)
- feature: renamed fhz1000 to fhem
- feature: added HISTORY and README.DEV
- doc: Added description of attribute "model".
- bugfix: delete the pidfile when terminating. (reported by Martin and Peter)
- feature: attribute showtime in web-pgm2 (show time instead of state)
- feature: defattr (default attribute for following defines)
- feature: added em1010.pl to the contrib directory
- doc: added linux.html (multiple devices, udev-links)
- REORGANIZATION:
- at/notify "renamed" to "define <name> at/notify"
- logfile/modpath/pidfile/port/verbose "renamed" to "attr global xxx"
- savefile renamed to "attr global statefile"
- save command added, it writes the configfile and the statefile
- delattr added
- list/xmllist format changed
- disable attribute for at/notify/filelog
See HISTORY for details and reasoning
- added rename command
- webpgm2 adapted to the new syntax, added device specific attribute
and "set" support, gnuplot files are configurable, links to the
documentation added.
- bugfix: more thorough serial line initialization
- 2007-01-25 (3.3)
- bugfix: 50_WS300.pm fix from Martin
- bugfix: pidfile does not work as expected (reported by Martin)
- bugfix: %U in the log-filename is wrong (bugreport by Juergen)
- feature: %V added to the log-filename
- feature: KS300 wind calibration possibility added
- feature: (software) filtering repeater messages (suggested by Martin)
- feature: the "client" fhz1000.pl can address another host
- bugfix: empty FHT battery is not reported (by Holger)
- feature: new FHT codes, e.g. month/day/hour/minute setting (by Holger)
- 2007-01-14 (3.2)
- bugfix: example $state changed to $value (remco)
- bugfix: sun*_rel does not work correctly with offset (Sebastian)
- feature: new HMS100TF codes (Sebastian)
- feature: logging unknown HMS with both unique and class ID (Sebastian)
- feature: WS300: "Wetter-Willi-Status", rain_raw/rain_cum added, historic
data (changes by Martin & Markus)
- bugfix: broken rereadcfg / CommandChain after init
(reported by Sebastian and Peter)
- bugfix: sunrise_coord returned "3", which is irritating
- 2007-01-08 (3.1)
- bugfix: delete checks the arg first "exactly", then as a regexp
- bugfix: sun*_rel does not work correctly with offset (Martin)
- feature: FAQ entry on how to install the sunrise stuff.
- feature: the inner core is modified to be able to handle
more than one "IO" device, i.e multiple FHZ at the same time,
or FHZ + FS10 + WS300. Consequences:
- "fhzdev <usbdevice>" replaced with "define <FHZNAME> FHZ <usbdevice>"
- "sendraw <fn> <code>" replaced with "set <FHZNAME> raw <fn> <code>"
- module function parameters changed (for module developers)
- set FHZ activefor dev
- select instead sleep after sending FHZ commands
- the at timer is more exact (around 1msec instead of 1 sec)
- ignoring FS20 device 0001/00/00
- feature: contrib/serial.pm to debug serial devices.
- feature: WS300 integrated: no external program needed (Martin)
- feature: updated to pgm3-0.7.0, see the CHANGELOG at Martins site
- 2006-12-28 (3.0)
- bugfix: KS300: Make the temperature negative, not the humidity
- bugfix: generate correct xmllist even with fhzdev none (Martin, 12.12)
- feature: one set command can handle multiple devices (range and enumeration)
- feature: new FS20 command on-till
- feature: perl: the current state is stored in the %value hash
- feature: perl: sunset renamed to sunset_rel, sunset_abs added (for on-till)
- feature: perl: isday function added
- feature: follow-on-for-timer attribute added to set the state to off
- bugfix: the ws300pc negative-temp bugfix included (from Martin Klerx)
- feature: version 0.6.2 of the webpgm3 included (from Martin Haas)
- 2006-11-27 (2.9a)
- bugfix: FileLog+Unknown device generates undefined messages
- bugfix: trigger with unknown device generates undefined messages
- 2006-11-19 (2.9)
- bugfix: fhz1000.pl dies at startup if the savefile does not exist
- bugfix: oldvalue hash is not initialized at startup (peter, Nov 09)
- feature: Notify reorganization (requested by juergen and matthias) :
- inform will be notified on both real events and set or trigger commands
- filelogs will additionally be notified on set or trigger commands
- the extra_notify flag is gone: it is default now, there is a
do_not_notify flag for the opposite behaviour.
- feature: at timespec as a function. Example: at +*{sunset()}
commandref.html and examples revisited.
- feature: 99_SUNRISE.pm added to use with the new at functionality
(replaces the old 99_SUNSET.pm)
- feature: webpgm2 "everything" room, at/notify section, arbitrary command
- bugfix: resetting the KS300
- feature: updated ws300pc (from martin klerx, Nov 08)
- bugfix: parsing timed commands implemented => thermo-off,thermo-on and
activate replaced with timed off-for-timer,on-for-timer and
on-old-for-timer (reported by martin klerx, Nov 08)
- feature: pidfile (requested by peter, Nov 10)
- bugfix: function 81 is not allowed
- 2006-11-08 (2.8)
- feature: store oldvalue for triggers. perl only. requested by peter.
- feature: inform cmd. Patch by Martin. There are many Martins around here :-)
- bugfix: XML: fix & and < and co
- bugfix: Accept KS300 negative temperature values
- change: the FS20 msg "rain-msg" is called now "activate"
- feature: start/stop rc script from Stefan (in the contrib directory)
- feature: attribute extra_notify: setting the device will trigger a notify
- feature: optional repeat count for the at command
- feature: skip_next attribute for the at command
- feature: WS300 support by Martin. Check the contrib/ws300 directory.
- bugfix: 91_DbLog.pm: retry if the connection is broken by Peter
- feature: Martin's pgm3-0.5.2 (see the CHANGELOG on his webpage)
- feature: RRD logging example by Peter (in the contrib/rrd directory)
- 2006-10-03 (2.7)
- bugfix: Another try on the > 25.5 problem. (Peters suggestion)
- feature: 99_ALARM.pm from Martin (in the contrib directory)
- feature: HMS100TFK von Peter P.
- feature: attribute loglevel
- feature: attribute dummy
- feature: attr command documented
- feature: the current version (0.5a) of the pgm3 from Martin.
- 2006-09-13 (2.6a)
- bugfix: the FHT > 25.5 problem again. A never ending story.
- 2006-09-08 (2.6)
- bugfix: updated the examples (hint from Juergen)
- bugfix: leading and trailing whitespaces in commands are ignored now
- feature: making life easier for perl oneliners: see commandref.html
(motivated by STefans suggestions)
- feature: include command and multiline commands in the configfiles (\)
- bugfix: web/pgm2 KS300 rain plot knows about the avg data
- bugfix: the FHT > 25.5 problem. Needs to be tested.
- feature: log unknown devices (peters idea, see notifyon description)
- feature: HMS wildcard device id for all HMS devices. See the define/HMS
section in the commandref.html for details.
NOTE: the wildcard for RM100-2 changed from 1001 to 1003.
(peters idea)
- feature: rolwzo_no_off.sh contrib file (for those who were already closed
out by automatically closing rollades, by Martin)
- feature: the current version (0.4.5) of the pgm3 from Martin.
- 2006-08-13 (2.5)
Special thanks to STefan Mayer for a lot of suggestions and bug reports
- If a command is enclosed in {}, then it will be evaluated as a perl
expression, if it is enclosed in "" then it is a shell command, else it is
a "normal" fhz1000 command.
"at" and "notifyon" follow this convention too.
Note: a shell command will always be issued in the background.
- won't die anymore if the at spec contains an unknown command
- rereadcfg added. Sending a HUP should work better now
- escaping % and @ in the notify argument is now possible with %% or @@
- new command trigger to test notify commands
- where you could specify an fhz command, now you can specify a list of
them, separated by ";". Escape is ;;
- KS300 sometimes reports "negative" rain when it begins to rain. Filter
such values. israining is set when the raincounter changed or the ks300
israining bit is set.
- sleep command, with millisecond accuracy
- HMS 100MG support by Peter Stark.
- Making FHT and FS20 messages more uniform
- contrib/fs20_holidays.sh by STefan Mayer
(simulate presence while on holiday)
- webfrontends/pgm4 by STefan Mayer: fs20.php
- KS300 avg. monthly values fixed (hopefully)
- deleted undocumented "exec" function (you can write it now as {...})
- 2006-07-23 (2.4)
- contrib/four2hex (to convert between ELV and our codes) by Peter Stark
- make dist added to set version (it won't work in a released version)
- reload function to reload (private) perl modules
- 20_FHT.pm fix: undef occures once without old data
- "setstate comment" is replaced with the attr command (i.e. attribute).
The corresponding xmllist COMMENT tag is replaced with the ATTR tag.
Devices or logs can have attr definitions.
- webfrontend/pgm2 (fhzweb.pl) updated to handle "room" attributes(showing
only devices in this room).
- version 0.4.2 of webfrontend/pgm3 integrated.
- contrib/ks300avg.pl to compute daily and monthly avarage values.
- the 40_KS300.pm module is computing daily and monthly avarages for the
temp/hum and wind values and sum of the rain. The cum_day and cum_month
state variables are used as helper values. To log the avarage use the
.*avg.* regexp. The regexp for the intraday log will trigger it also.
- Added the contrib file garden.pl as a more complex example: garden
irrigation. The program computes the time for irrigation from the avarage
temperature reported by the ks300-2.
- Enable uppercase hex codes (Bug reported by STefan Mayer)
- Renamed the unknown_XX FHT80b codes to code_XXXXXX, this will produce
"Undefined type" messages when reading the old save file
- RM100-2 added (thanks for the codes from andikt).
- 2006-6-22 (2.3)
- CRC checking (i.e. ignoring messages with bad CRC, message on verbose 4)
- contrib/checkmesg.pl added to check message consistency (debugging)
- FHT: unknown_aa, unknown_ba codes added. What they are for?
- Empty modpath / no modpath error messages added (some user think modpath is
superfluous)
- Unparsed messages (verbose 5) now printed as hex
- Try to reattach to the usb device if it disappears: no need to
restart the server if the device is pulled out from the USB socket and
plugged in again (old versions go into a busy loop here).
- Supressing the seldom (ca 1 out of 700) short KS300 messages.
(not sure how to interpret them)
- Added KS300 "israining" status flag. Note: this not always triggers when it
is raining, but there seems to be a correlation. To be evaluated in more
detail.
- notifyon can now execute "private" perl code as well (updated
commandref.html, added the file example/99_PRIV.pm)
- another "perl code" example is logging the data into the database
(with DBI), see the file contrib/91_DbLog.pm. Tested with an Oracle DB.
- logs added to the xmllist
- FHT80b: Fix measured-temp over 25.5 (handling the tempadd messages better)
- 2006-05-20 (2.2)
- FHZ1300 support verified (+ doc changes)
- KS300 support added (with Temperature, Humidity, Wind speed, Rain).
Not verified/undecoded: subzero temp, weak battery, Is-raining flag,
wind speed > 100km/h
- webpgm2 log fix for "offed" FHT devices (with no actuator data)
- webpgm3 upgrade (by Martin Haas, see webpgm/pgm3/docs/CHANGES for details)
- HMS logging/state format changed to make it similar to KS300
- added HMS100WD (thanks to Sascha Pollok)
- ntfy/logging changed to be able to notify for multiple attributes
arriving in one message
- central FHTcode settable (see commandref.html)
- optionally listen for non-local requests (port <num> global)
- unknown logging
- FAQ
- 2006-04-15 (2.1)
- webfrontend/pgm2 changes:
- make it work on Asus dsl-routers (no "use warnings")
- css/readonly configurable
- Formatting for HMS data
- comments can be added to each device (setstate <dev> comment:xxx)
- testbed to dry-test functionality (test directory)
- added an empty hull for the KS300 weather module
- added undocumented "exec" function to call arbitrary program parts
for debugging. Example: exec FhzDecode("81xx04xx0101a0011234030011");
- webfrontend/pgm3, contributed by Martin Haas
- fixed pgm1: changing values should work now
- 2006-04-02 (2.0)
- XmlList and webfrontend/pgm1 programs from Raoul Matthiessen
- list tries to display the state and not the last command
- Both log facilities (FileLog and Log) take wildcards
(week, year, month, etc) to make logfile rotating easier
- webfrontend/pgm2
- 2006-02-12 (1.9b)
- Bugfix: Fixing the same bug again (thanks to Martin)
- 2006-02-12 (1.9a)
- Bugfix: wrong rights for HMS and wrong place for readonly
(thanks to Juergen)
- 2006-02-10 (1.9)
(aka as the Juergen release)
- The FHZ1300 is reported to work
- Bugfix: spaces before comment in the config file should be ignored
- added FS20STR codes to 10_FS20.pm
- names restricted to A-Za-z0-9.:- (especially _ is not allowed)
- delete calles now an UndefFn in the module
- implementation of FS20 function group/local master/global master
- the list command tells you the definition of the device too
- 2006-01-05 (1.8)
- Bugfix: detailed FS20 status was not set from external event
- Bugfix: setstate for FS20 returned the last state set
- Bugfix: undefined FS20 devices (can) crash the server
- HMS module added by Martin Mueller
(currently supporting the HMS100T & HMS100TF)
- Log modules added, the first one being a simple FileLog
(inspired by Martin Mueller)
- A little gnuplot script to display temperature and actuator changes
- 2006-01-04 (1.7)
- the at command can be used to execute something repeatedly with *
- ntfy can filter on device or on device+event with a regexp
- checking the delete and notify regexps if they make sense
- the FHT init string is now a set command (refreshvalues)
- shutdown saves the detailed device information too
- 2006-01-03 (1.6)
- signal handling (to save the state on shutdown)
- module FHZ addded (for the FHZ1000PC device itself)
- added the get function (to make the initialization prettier)
- the module ST was renamed to FS20
- FS20 timer commands added
- modules command removed (we are loading everything from the modpath
directory)
- FHT80b module added (yes, it is already useful, you can set
and view a lot of values)
- documentation adapted
- Added a TODO file
- 2005-12-26 (1.5)
- "modularized" in preparation for the FHT80B -> each device has a type
- added relative "at" commands (with +HH:MM:SS)
- multiple commands on one line separated with ;
- sleeping 0.22 seconds after an ST command
- some commands/syntax changed:
- switch => set
- device => fhzdevice
- define <name> ... => define <name> <type> ...
- the state of the devices and the at commands are saved
- at start always sending a "set 0001 00 01" to enable the FHZ receiever.
This is a workaround.
- doc rewrite, examples directory
- 2005-11-10 (1.4)
- Reformatting the package and the documentation
- New links
- 2005-10-27 (1.3)
- Bugfix: multiple at commands at the same time.
Reference in New Issue View Git Blame Copy Permalink