fhem-mirror/fhem/FHEM/20_FRM_PWM.pm

########################################################################################
# $Id$
########################################################################################

=encoding UTF-8

=head1 NAME

FHEM module for one Firmata PWM output pin

=head1 LICENSE AND COPYRIGHT

Copyright (C) 2013 ntruchess
Copyright (C) 2016 jensb

All rights reserved

This script is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License
as published by the Free Software Foundation; either version 2
of the License, or (at your option) any later version.

This script is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this script; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.

A copy of the GNU General Public License, Version 2 can also be found at

http://www.gnu.org/licenses/old-licenses/gpl-2.0.

This copyright notice MUST APPEAR in all copies of the script!

=cut

package main;

use strict;
use warnings;

#add FHEM/lib to @INC if it's not allready included. Should rather be in fhem.pl than here though...
BEGIN {
  if (!grep(/FHEM\/lib$/,@INC)) {
    foreach my $inc (grep(/FHEM$/,@INC)) {
      push @INC,$inc."/lib";
    };
  };
};

use SetExtensions qw/ :all /;

#####################################

my %gets = (
  "dim"   => "",
  "value" => "",
);

# number of arguments
my %sets = (
  "on:noArg"           => 0,
  "off:noArg"          => 0,
  "toggle:noArg"       => 0,
  "value"              => 1,
  "dim:slider,0,1,100" => 1,
  "dimUp:noArg"        => 0,
  "dimDown:noArg"      => 0,
);

sub FRM_PWM_Initialize
{
  my ($hash) = @_;

  $hash->{SetFn}     = "FRM_PWM_Set";
  $hash->{GetFn}     = "FRM_PWM_Get";
  $hash->{DefFn}     = "FRM_Client_Define";
  $hash->{InitFn}    = "FRM_PWM_Init";
  $hash->{UndefFn}   = "FRM_Client_Undef";
  $hash->{AttrFn}    = "FRM_PWM_Attr";
  $hash->{StateFn}   = "FRM_PWM_State";

  $hash->{AttrList}  = "restoreOnReconnect:on,off restoreOnStartup:on,off IODev $main::readingFnAttributes";
  main::LoadModule("FRM");
}

sub FRM_PWM_Init
{
  my ($hash,$args) = @_;
  my $name = $hash->{NAME};

  if (defined($main::defs{$name}{IODev_ERROR})) {
    return 'Perl module Device::Firmata not properly installed';
  }

  my $ret = FRM_Init_Pin_Client($hash, $args, Device::Firmata::Constants->PIN_PWM);
  if (defined($ret)) {
    readingsSingleUpdate($hash, 'state', "error initializing: $ret", 1);
    return $ret;
  }

  eval {
    my $firmata = FRM_Client_FirmataDevice($hash);
    my $resolution = 8;
    if (defined $firmata->{metadata}{pwm_resolutions}) {
      $resolution = $firmata->{metadata}{pwm_resolutions}{$hash->{PIN}}
    }
    $hash->{resolution} = $resolution;
    $hash->{".max"} = defined $resolution ? (1<<$resolution)-1 : 255;
    $hash->{".dim"} = 0;
    $hash->{".toggle"} = "off";
  };
  if ($@) {
    my $ret = FRM_Catch($@);
    readingsSingleUpdate($hash, 'state', "error initializing: $ret", 1);
    return $ret;
  }

  if (!(defined AttrVal($name,"stateFormat",undef))) {
    $main::attr{$name}{"stateFormat"} = "value";
  }

  my $value = ReadingsVal($name,"value",undef);
  if (defined $value and AttrVal($hash->{NAME},"restoreOnReconnect","on") eq "on") {
    FRM_PWM_Set($hash,$name,"value",$value);
  }

  main::readingsSingleUpdate($hash,"state","Initialized",1);

  return undef;
}

sub FRM_PWM_Set
{
  my ($hash, $name, $cmd, @a) = @_;

  return "set command missing" if(!defined($cmd));
  my @match = grep( $_ =~ /^$cmd($|:)/, keys %sets );
  return SetExtensions($hash, join(" ", keys %sets), $name, $cmd, @a) unless @match == 1;
  return "$cmd requires $sets{$match[0]} argument(s)" unless (@a == $sets{$match[0]});

  if (defined($main::defs{$name}{IODev_ERROR})) {
    return 'Perl module Device::Firmata not properly installed';
  }

  my $value = shift @a;
  eval {
    SETHANDLER: {
      $cmd eq "on" and do {
        FRM_PWM_writeOut($hash,$hash->{".max"});
        $hash->{".toggle"} = "on";
        last;
      };
      $cmd eq "off" and do {
        FRM_PWM_writeOut($hash,0);
        $hash->{".toggle"} = "off";
        last;
      };
      $cmd eq "toggle" and do {
        my $toggle = $hash->{".toggle"};
        TOGGLEHANDLER: {
          $toggle eq "off" and do {
            FRM_PWM_writeOut($hash,$hash->{".dim"});
            $hash->{".toggle"} = "up";
            last;
          };
          $toggle eq "up" and do {
            FRM_PWM_writeOut($hash,$hash->{".max"});
            $hash->{".toggle"} = "on";
            last;
          };
          $toggle eq "on" and do {
            FRM_PWM_writeOut($hash,$hash->{".dim"});
            $hash->{".toggle"} = "down";
            last;
          };
          $toggle eq "down" and do {
            FRM_PWM_writeOut($hash,0);
            $hash->{".toggle"} = "off";
            last;
          };
        };
        last;
      };
      $cmd eq "value" and do {
        my $max = $hash->{".max"};
        die "maximum value of $max exceeded: $value" if ($value > $max);
        FRM_PWM_writeOut($hash,$value);
        TOGGLEHANDLER: {
          $value == $max and do {
            $hash->{".toggle"} = "on";
            last;
          };
          $value == 0 and do {
            $hash->{".toggle"} = "off";
            last;
          };
          $hash->{".toggle"} = "up" unless $hash->{".toggle"} eq "down";
          $hash->{".dim"} = $value;
        };
        last;
      };
      $cmd eq "dim" and do {
        die "maximum value of 100 exceeded: $value" if ($value > 100);
        my $dim = int($hash->{".max"}*$value/100);
        FRM_PWM_writeOut($hash,$dim);
        TOGGLEHANDLER: {
          $value == 100 and do {
            $hash->{".toggle"} = "on";
            last;
          };
          $value == 0 and do {
            $hash->{".toggle"} = "off";
            last;
          };
          $hash->{".toggle"} = "up" unless $hash->{".toggle"} eq "down";
          $hash->{".dim"} = $dim;
        };
        last;
      };
      $cmd eq "dimUp" and do {
        my $dim = $hash->{".dim"};
        my $max = $hash->{".max"};
        if ($dim > $max * 0.9) {
          $dim = $max;
          $hash->{".toggle"} = "on";
        } else {
          $dim = $dim + $max / 10;
          $hash->{".toggle"} = "up" unless $hash->{".toggle"} eq "down";
        }
        FRM_PWM_writeOut($hash,$dim);
        $hash->{".dim"} = $dim;
        last;
      };
      $cmd eq "dimDown" and do {
        my $step = $hash->{".max"} / 10;
        my $dim = $hash->{".dim"};
        if ($dim < $step) {
          $dim = 0;
          $hash->{".toggle"} = "off";
        } else {
          $dim = $dim - $step;
          $hash->{".toggle"} = "down" unless $hash->{".toggle"} eq "up";
        }
        FRM_PWM_writeOut($hash,$dim);
        $hash->{".dim"} = $dim;
        last;
      };
    }
  };
  if ($@) {
    my $ret = FRM_Catch($@);
    $hash->{STATE} = "set $cmd error: " . $ret;
    return $hash->{STATE};
  }

  return undef;
}

sub FRM_PWM_writeOut
{
  my ($hash,$value) = @_;

  FRM_Client_FirmataDevice($hash)->analog_write($hash->{PIN},$value);
  readingsBeginUpdate($hash);
  readingsBulkUpdate($hash,"value",$value, 1);
  readingsBulkUpdate($hash,"dim",int($value*100/$hash->{".max"}), 1);
  readingsEndUpdate($hash, 1);
}

sub FRM_PWM_Get
{
  my ($hash, $name, $cmd, @a) = @_;

  return "get command missing" if(!defined($cmd));
  return "unknown get command '$cmd', choose one of " . join(":noArg ", sort keys %gets) . ":noArg" if(!defined($gets{$cmd}));

  GETHANDLER: {
    $cmd eq 'dim' and do {
      return ReadingsVal($name,"dim",undef);
    };
    $cmd eq 'value' and do {
      return ReadingsVal($name,"value",undef);
    };
  }
}

sub FRM_PWM_State
{
  my ($hash, $tim, $sname, $sval) = @_;
  my $name = $hash->{NAME};
  if ($sname eq "value") {
    # depending on the FHEM startup timing and the Arduino connection type, FHEM statefile restore and Arduino connect take place in arbitrary order
    if (AttrVal($name, "restoreOnStartup", "on") eq "on") {
      $hash->{READINGS}{$sname}{VAL} = $sval;
      $hash->{READINGS}{$sname}{TIME} = $tim;
      if (defined($hash->{IODev}) && defined($hash->{IODev}->{FirmataDevice} && $hash->{IODev}->{FirmataDevice}->{state} eq "Initialized")) {
        FRM_PWM_Set($hash, $name, "value", $sval);
      }
    } else {
      $hash->{READINGS}{$sname}{VAL} = undef;
      $hash->{READINGS}{$sname}{TIME} = gettimeofday();
    }
  }
  return 0; # default processing by fhem.pl
}

sub FRM_PWM_Attr
{
  my ($command,$name,$attribute,$value) = @_;
  my $hash = $main::defs{$name};
  eval {
    if ($command eq "set") {
      ARGUMENT_HANDLER: {
        $attribute eq "IODev" and do {
          if ($main::init_done and (!defined ($hash->{IODev}) or $hash->{IODev}->{NAME} ne $value)) {
            FRM_Client_AssignIOPort($hash,$value);
            FRM_Init_Client($hash) if (defined ($hash->{IODev}));
          }
          last;
        };
      }
    }
  };
  if ($@) {
    my $ret = FRM_Catch($@);
    $hash->{STATE} = "$command $attribute error: " . $ret;
    return $hash->{STATE};
  }
}

1;

=pod

=head1 CHANGES

  2016 jensb
    o modified subs FRM_PWM_Init and FRM_PWM_State to support attribute "restoreOnStartup"

  24.08.2020 jensb
    o check for IODev install error in Init and Set
    o prototypes removed
    o set argument metadata added
    o get/set argument verifier improved
    o module help updated

  22.10.2020 jensb
    o annotaded module help of attributes for FHEMWEB

=cut


=pod

=head1 FHEM COMMANDREF METADATA

=over

=item device

=item summary Firmata: PWM output

=item summary_DE Firmata: PWM Ausgang

=back

=head1 INSTALLATION AND CONFIGURATION

=begin html

<a name="FRM_PWM"/>
<h3>FRM_PWM</h3>
<ul>
  This module represents a pin of a <a href="http://www.firmata.org">Firmata device</a>
  that should be configured as a pulse width modulated output (PWM).<br><br>

  Requires a defined <a href="#FRM">FRM</a> device to work. The pin must be listed in the internal reading
  "<a href="#FRMinternals">pwm_pins</a>" of the FRM device (after connecting to the Firmata device) to be
  used as PWM output.<br><br>

  <a name="FRM_PWMdefine"/>
  <b>Define</b>
  <ul>
    <code>define &lt;name&gt; FRM_PWM &lt;pin&gt;</code><br><br>

    Defines the FRM_PWM device. &lt;pin&gt> is the arduino-pin to use.
  </ul><br>

  <a name="FRM_PWMset"/>
  <b>Set</b>
  <ul>
    <li><code>set &lt;name&gt; on</code><br>
    sets the pulse-width to 100%<br>
    </li>
    <li>
    <code>set &lt;name&gt; off</code><br>
    sets the pulse-width to 0%<br>
    </li>
    <li>
    <a href="#setExtensions">set extensions</a> are supported<br>
    </li>
    <li>
    <code>set &lt;name&gt; toggle</code><br>
    toggles the pulse-width in between to the last value set by 'value' or 'dim' and 0 respectivly 100%<br>
    </li>
    <li>
    <code>set &lt;name&gt; value &lt;value&gt;</code><br>
    sets the pulse-width to the value specified<br>
    The min value is zero and the max value depends on the Firmata device (see internal reading<br>
    "<a href="#FRMinternals">pwm_resolutions</a>" of the FRM device). For 8 bits resolution the range
    is 0 to 255 (also see <a href="http://arduino.cc/en/Reference/AnalogWrite">analogWrite()</a> for details)<br>
    </li>
    <li>
    <code>set &lt;name&gt; dim &lt;value&gt;</code><br>
    sets the pulse-width to the value specified in percent<br>
    Range is from 0 to 100<br>
    </li>
    <li>
    <code>set &lt;name&gt; dimUp</code><br>
    increases the pulse-width by 10%<br>
    </li>
    <li>
    <code>set &lt;name&gt; dimDown</code><br>
    decreases the pulse-width by 10%<br>
    </li>
  </ul><br>

  <a name="FRM_PWMget"/>
  <b>Get</b><br>
  <ul>
    <li>
    <code>get &lt;dim&gt;</code><br>
    returns current dim setting in percent, see description for set command for more details<br>
    </li>
    <li>
    <code>get &lt;value&gt;</code><br>
    returns current dim setting, see description for set command for more details<br>
    </li>
  </ul><br>

  <a name="FRM_PWMattr"/>
  <b>Attributes</b><br>
  <ul>
    <a name="restoreOnStartup"/>
    <li>restoreOnStartup &lt;on|off&gt;</li>

    <a name="restoreOnReconnect"/>
    <li>restoreOnReconnect &lt;on|off&gt;</li>

    <a name="IODev"/>
    <li><a href="#IODev">IODev</a><br>
    Specify which <a href="#FRM">FRM</a> to use. Only required if there is more than one FRM-device defined.
    </li>

    <li><a href="#attributes">global attributes</a></li>

    <li><a href="#readingFnAttributes">readingFnAttributes</a></li>
  </ul><br>

  <a name="FRM_PWMnotes"/>
  <b>Notes</b><br>
  <ul>
    <li>attribute <i>stateFormat</i><br>
    In most cases it is a good idea to assign "value" to the attribute <i>stateFormat</i>. This will show the
    current value of the pin in the web interface.
    </li>
  </ul>
</ul><br>

=end html

=begin html_DE

<a name="FRM_PWM"/>
<h3>FRM_PWM</h3>
<ul>
  Die Modulbeschreibung von FRM_PWM gibt es nur auf <a href="commandref.html#FRM_PWM">Englisch</a>. <br>
</ul><br>

=end html_DE

=cut