FHEM/fhem-mirror
2
0
Fork 0
mirror of https://github.com/fhem/fhem-mirror.git synced 2025-04-06 06:08:44 +00:00
Code Issues Releases Wiki Activity
fhem-mirror/fhem/FHEM/lib/signalduino_protocols.hash
sidey79 e3f38508ed 00_SIGNALduino.pm Version 3.3.3 
feature: getAvailableFirmware returns only version for 
   which a file could be found.
   change: Attribute hardware does not longer support nano.
   select nano328 instead
 feature: new webmenu "Display protocollist"
 feature: Serval new protocols added
 feature: New Oregon V3 sensors suppored.
 feature: Firmware for avr boards can be downloaded and flashed 
   on demand from gitghub releases
 feature:  supports dupTimeout on same iodev

Protocol definitions are now located in sepaerate file: FHEM/lib/signalduino_protocols.hash


git-svn-id: https://svn.fhem.de/fhem/trunk@18676 2b470e98-0d58-463d-a4d8-8e2adae1ed80
2019-02-20 21:46:10 +00:00

2192 lines
115 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

################################################################################
# The file is part of the SIGNALduino project
#
# !!! useful hints !!!
# --------------------
# name => ' ' # name of device or group of all devices
# comment => ' ' # exact description or example of devices
# id => ' ' # number of the protocol definition, each number only once use (accepted no .)
# knownFreqs => ' ' # known receiver frequency 433.92 | 868.35 (some sensor families or remote send on more frequencies)
#
# Time for one, zero, start, sync, float and pause are calculated by clockabs * value = result in microseconds, positive value stands for high signal, negative value stands for low signal
# clockrange => [ , ] # only MC signals | min , max of pulse / pause times in microseconds
# clockabs => ' ' # only MU + MS signals | value for calculation of pulse / pause times in microseconds
# clockabs => '-1' # only MS signals | value pulse / pause times is automatically
# one => [ , ] # only MU + MS signals | value pair for a one bit, must be always a positive and negative factor of clockabs (accepted . | example 1.5)
# zero => [ , ] # only MU + MS signals | value pair for a zero bit, must be always a positive and negative factor of clockabs (accepted . | example -1.5)
# start => [ , ] # only MU - value pair or more for start message
# preSync => [ , ] # only MU + MS - value pair or more for preamble pulse of signal
# sync => [ , ] # only MS - value pair or more for sync pulse of signal
# float => [ , ] # only MU + MS signals | Convert 0F -> 01 (F) to be compatible with CUL
# pause => [ ] # delay when sending between two signals (clockabs * pause must be < 32768
#
# length_min => ' ' # minimum number of bits of message length
# length_max => ' ' # maximum number of bits of message length
# paddingbits => ' ' # pad up to x bits before call module, default is 4.
# paddingbits => '1' # will disable padding, use this setting when using dispatchBin
# paddingbits => '2' # is padded to an even number, that is a maximum of 1 bit
# remove_zero => 1 # removes leading zeros from output
#
# developId => 'm' # logical module is under development
# developId => 'p' # protocol is under development or to reserve IDs, the ID in the development attribute with developId => 'p' are only used without the other entries
# developId => 'y' # protocol is under development, all IDs in the development attribute with developId => 'y' are used
#
# preamble => ' ' # prepend to converted message
# preamble => 'u..' # message is unknown and without module, forwarding SIGNALduino_un or FHEM DOIF
# preamble => 'U..' # message can be unknown and without module, no forwarding SIGNALduino_un but forwarding can FHEM DOIF
# postamble => ' ' # appends a string to the demodulated signal
#
# clientmodule => ' ' # FHEM module for processing
# filterfunc => ' ' # SIGNALduino_filterSign | SIGNALduino_compPattern --> SIGNALduino internal filter function, it remove the sign from the pattern, and compress message and pattern
# # SIGNALduino_filterMC --> SIGNALduino internal filter function, it will decode MU data via Manchester encoding
# dispatchBin => 1, # If set to 1, data will be dispatched in binary representation to other logcial modules.
# If not set (default) or set to 0, data will be dispatched in hex mode to other logical modules.
# postDemodulation => \& # only MU - SIGNALduino internal sub for processing before dispatching to a logical module
# method => \& # call to process this message
# format => ' ' # twostate | pwm | manchester --> modulation type of the signal, only manchester use SIGNALduino internal, other types only comment
# modulematch => ' ' # RegEx on the exact message including preamble | if defined, it will be evaluated
# polarity => 'invert' # only MC signals | invert bits of the signal
#
##### notice #### or #### info ############################################################################################################
# !!! Between the keys and values ​​no tabs not equal to a width of 8 or please use spaces !!!
# !!! Please use first unused id for new protocols !!!
# ID´s are currently unused: 20 | 38 | 68
# ID´s need to be revised (preamble u): 5|6|19|20|21|22|23|24|25|26|27|28|31|36|40|42|52|56|59|63|78|87|88
###########################################################################################################################################
# Please provide at least three messages for each new MU/MC/MS protocol and a URL of issue in GitHub or discussion in FHEM Forum
# https://forum.fhem.de/index.php/topic,58396.975.html | https://github.com/RFD-FHEM/RFFHEM
###########################################################################################################################################
(
"0" => ## various weather sensors (500 | 9100)
# CUL_TCM97001 Typ - Prologue
# MS;P0=-4152;P1=643;P2=-2068;P3=-9066;D=1310121210121212101210101212121212121212121212121010121012121212121012101212;CP=1;SP=3;R=220;O;m2;
# MS;P0=-4149;P2=-9098;P3=628;P4=-2076;D=3230343430343434303430303434343434343434343434343030343030343434343034303434;CP=3;SP=2;R=218;O;m2;
# CUL_TCM97001 Typ - AURIOL / Mebus / TCM...
# MS;P0=-9298;P1=495;P2=-1980;P3=-4239;D=1012121312131313121313121312121212121212131212131312131212;CP=1;SP=0;R=223;O;m2;
{
name => 'weather (v1)',
comment => 'temperature / humidity or other sensors',
id => '0',
knownFreqs => '433.92',
one => [1,-7],
zero => [1,-3],
sync => [1,-16],
clockabs => -1,
format => 'twostate', # not used now
preamble => 's', # prepend to converted message
postamble => '00', # Append to converted message
clientmodule => 'CUL_TCM97001',
#modulematch => '^s[A-Fa-f0-9]+',
length_min => '24',
length_max => '40',
paddingbits => '8', # pad up to 8 bits, default is 4
},
"0.1" => ## other Sensors (380 | 9650)
# CUL_TCM97001 Typ - AURIOL | Mebus
# MS;P1=416;P2=-9618;P3=-4610;P4=-2036;D=1213141313131313141313141314141414141414141313141314131414;CP=1;SP=2;R=220;O;m0;
# MS;P1=397;P2=-2033;P3=-4627;P4=-9630;D=1413121313131313121313121312121212121212121313121312131212;CP=1;SP=4;R=221;
# MS;P0=-9690;P3=354;P4=-4662;P5=-2107;D=3034343434343535343534343435353535353535353434353535343535;CP=3;SP=0;R=209;O;m2;
## LIDL Wetterstation
# https://github.com/RFD-FHEM/RFFHEM/issues/63
# MS;P1=367;P2=-2077;P4=-9415;P5=-4014;D=141515151515151515121512121212121212121212121212121212121212121212;CP=1;SP=4;O;
{
name => 'weather (v2)',
comment => 'temperature / humidity or other sensors',
id => '0.1',
knownFreqs => '433.92',
one => [1,-12],
zero => [1,-6],
sync => [1,-26],
clockabs => -1,
format => 'twostate', # not used now
preamble => 's', # prepend to converted message
postamble => '00', # Append to converted message
clientmodule => 'CUL_TCM97001',
#modulematch => '^s[A-Fa-f0-9]+',
length_min => '24',
length_max => '32',
paddingbits => '8',
},
"0.2" => ## other Sensors | for sensors how tol is runaway (260+tol | 9650)
# MS;P1=-2140;P2=309;P3=-4690;P4=-9695;D=2421232323232121232123232321212121212121212123212121232121;CP=2;SP=4;R=211;m1;
# MS;P0=-9703;P1=304;P2=-2133;P3=-4689;D=1012131312131212131213131312121212121212121212131312131212;CP=1;SP=0;R=208;
# MS;P0=138;P1=-2140;P2=315;P3=-9704;P4=-4713;P5=234;D=2321212421242454210424212421512121215121512124212121542121;CP=2;SP=3;R=210;
{
name => 'weather (v3)',
comment => 'temperature / humidity or other sensors',
id => '0.2',
knownFreqs => '433.92',
one => [1,-18],
zero => [1,-9],
sync => [1,-37],
clockabs => -1,
format => 'twostate', # not used now
preamble => 's', # prepend to converted message
postamble => '00', # Append to converted message
clientmodule => 'CUL_TCM97001',
#modulematch => '^s[A-Fa-f0-9]+',
length_min => '24',
length_max => '32',
paddingbits => '8',
},
"0.3" => ## Pollin PFR-130
# CUL_TCM97001 Typ - AURIOL | W174
# MS;P0=-3890;P1=386;P2=-2191;P3=-8184;D=1312121212121012121212121012121212101012101010121012121210121210101210101012;CP=1;SP=3;R=20;O;
# MS;P0=-2189;P1=371;P2=-3901;P3=-8158;D=1310101010101210101010101210101010121210121212101210101012101012121012121210;CP=1;SP=3;R=20;O;
# Ventus W174
# MS;P3=-2009;P4=479;P5=-9066;P6=-4047;D=45434343464343434643464643464643434643464646434346464343434343434346464643;CP=4;SP=5;R=55;O;m2;
{
name => 'weather (v4)',
comment => 'temperature / humidity or other sensors | Pollin PFR-130, Ventus W174 ...',
id => '0.3',
knownFreqs => '433.92',
one => [1,-10],
zero => [1,-5],
sync => [1,-21],
clockabs => -1,
preamble => 's', # prepend to converted message
postamble => '00', # Append to converted message
clientmodule => 'CUL_TCM97001',
length_min => '36',
length_max => '42',
paddingbits => '8', # pad up to 8 bits, default is 4
},
"0.4" => ## Auriol Z31092 (450 | 9200)
# CUL_TCM97001 Typ - AURIOL
# MS;P0=443;P3=-9169;P4=-1993;P5=-3954;D=030405040505050505050404040404040404040505050504050405050504040405;CP=0;SP=3;R=14;O;m0;
# MS;P0=-9102;P1=446;P2=-3956;P3=-2008;D=10121312121212121312131213131313131313131212121313121213121213121314;CP=1;SP=0;R=212;O;m2;
{
name => 'weather (v5)',
comment => 'temperature / humidity or other sensors | Auriol Z31092',
id => '0.4',
knownFreqs => '433.92',
one => [1,-9],
zero => [1,-4],
sync => [1,-20],
clockabs => 450,
preamble => 's', # prepend to converted message
postamble => '00', # Append to converted message
clientmodule => 'CUL_TCM97001',
length_min => '32',
length_max => '36',
paddingbits => '8', # pad up to 8 bits, default is 4
},
"1" => ## Conrad RSL
# MS;P1=1138;P2=-723;P3=583;P4=-1285;P5=-7166;D=351234341234341212341212123412343412341234341234343434343434343434;CP=3;SP=5;R=247;O;m2;
# MS;P1=1154;P2=-697;P3=559;P4=-1303;P5=-7173;D=351234341234341212341212123412343412341234341234343434343434343434;CP=3;SP=5;R=247;O;
# MS;P0=561;P1=-1291;P2=-7158;P3=1174;P4=-688;D=023401013401013434013434340134010134013401013401010101010101010101;CP=0;SP=2;R=248;m1;
{
name => 'Conrad RSL v1',
comment => 'remotes and switches',
id => '1',
knownFreqs => '',
one => [2,-1],
zero => [1,-2],
sync => [1,-12],
clockabs => '560',
format => 'twostate', # not used now
preamble => 'P1#', # prepend to converted message
postamble => '', # Append to converted message
clientmodule => 'SD_RSL',
modulematch => '^P1#[A-Fa-f0-9]{8}',
length_min => '20', # 23 | userMSG 32 ?
length_max => '40', # 24 | userMSG 32 ?
},
"2" => ## Self build arduino sensor
{
name => 'Arduino',
comment => 'self build arduino sensor (developModule. SD_AS module only in github)',
developId => 'm',
id => '2',
knownFreqs => '',
one => [1,-2],
zero => [1,-1],
sync => [1,-20],
clockabs => '500',
format => 'twostate',
preamble => 'P2#', # prepend to converted message
clientmodule => 'SD_AS',
modulematch => '^P2#.{7,8}',
length_min => '32',
length_max => '34', # Don't know maximal lenth of a valid message
paddingbits => '8', # pad up to 8 bits, default is 4
},
"3" => ## itv1 - remote like WOFI Lamp | Intertek Modell 1946518 // ELRO
# need more Device Infos / User Message
{
name => 'itv1',
comment => 'remote for WOFI | Intertek',
id => '3',
knownFreqs => '',
one => [3,-1],
zero => [1,-3],
#float => [-1,3], # not full supported now later use
sync => [1,-31],
clockabs => -1, # -1=auto
format => 'twostate', # not used now
preamble => 'i',
clientmodule => 'IT',
modulematch => '^i......',
length_min => '24',
length_max => '24', # Don't know maximal lenth of a valid message
},
"3.1" => ## itv1_sync40 | Intertek Modell 1946518 // ELRO
# MS;P0=-11440;P1=-1121;P2=-416;P5=309;P6=1017;D=150516251515162516251625162516251515151516251625151;CP=5;SP=0;R=66;
# MS;P1=309;P2=-1130;P3=1011;P4=-429;P5=-11466;D=15123412121234123412141214121412141212123412341234;CP=1;SP=5;R=38; Gruppentaste, siehe Kommentar in sub SIGNALduino_bit2itv1
# need more Device Infos / User Message
{
name => 'itv1_sync40',
comment => 'IT remote control PAR 1000, ITS-150, AB440R',
id => '3',
knownFreqs => '',
one => [3.5,-1],
zero => [1,-3.8],
float => [1,-1], # fuer Gruppentaste (nur bei ITS-150,ITR-3500 und ITR-300), siehe Kommentar in sub SIGNALduino_bit2itv1
sync => [1,-44],
clockabs => -1, # -1=auto
format => 'twostate', # not used now
preamble => 'i',
clientmodule => 'IT',
modulematch => '^i......',
length_min => '24',
length_max => '24', # Don't know maximal lenth of a valid message
postDemodulation => \&SIGNALduino_bit2itv1,
},
"4" => ## arctech2
# need more Device Infos / User Message
{
name => 'arctech2',
id => '4',
knownFreqs => '',
#one => [1,-5,1,-1],
#zero => [1,-1,1,-5],
one => [1,-5],
zero => [1,-1],
#float => [-1,3], # not full supported now, for later use
sync => [1,-14],
clockabs => -1, # -1 = auto
format => 'twostate', # tristate can't be migrated from bin into hex!
preamble => 'i', # Append to converted message
postamble => '00', # Append to converted message
clientmodule => 'IT',
modulematch => '^i......',
length_min => '39',
length_max => '44', # Don't know maximal lenth of a valid message
},
"5" => # Unitec, Modellnummer 6899/45108
# https://github.com/RFD-FHEM/RFFHEM/pull/389#discussion_r237232347 | https://github.com/RFD-FHEM/RFFHEM/pull/389#discussion_r237245943
# MU;P0=-31960;P1=660;P2=401;P3=-1749;P5=276;D=232353232323232323232323232353535353232323535353535353535353535010;CP=5;R=38;
# MU;P0=-1757;P1=124;P2=218;P3=282;P5=-31972;P6=644;P7=-9624;D=010201020303030202030303020303030202020202020203030303035670;CP=2;R=32;
# MU;P0=-1850;P1=172;P3=-136;P5=468;P6=236;D=010101010101310506010101010101010101010101010101010101010;CP=1;R=30;
# A AN:
# MU;P0=132;P1=-4680;P2=508;P3=-1775;P4=287;P6=192;D=123434343434343634343436363434343636343434363634343036363434343;CP=4;R=2;
# A AUS:
# MU;P0=-1692;P1=132;P2=194;P4=355;P5=474;P7=-31892;D=010202040505050505050404040404040404040470;CP=4;R=27;
{
name => 'Unitec',
comment => 'remote control model 6899/45108',
id => '5',
knownFreqs => '',
one => [3,-1], # ?
zero => [1,-3], # ?
clockabs => 500, # ?
developId => 'y',
format => 'twostate',
preamble => 'u5#',
#clientmodule => '',
#modulematch => '',
length_min => '24', # ?
length_max => '24', # ?
},
"6" => ## Eurochron Protocol
# MS;P1=-7982;P2=262;P3=-1949;P4=-948;D=21232423232424242324242424242424242424232424232323242424242424232424242324;CP=2;SP=1;R=249;O;m2;
# MS;P0=254;P1=-7990;P2=-1935;P3=-950;D=01020302020303030203030303030303030303020302030203030303030303020303030203;CP=0;SP=1;R=248;O;m2;
{
name => 'weather',
comment => 'unknown sensor is under development',
id => '6',
knownFreqs => '',
one => [1,-10],
zero => [1,-5],
sync => [1,-36], # This special device has no sync
clockabs => 220, # -1 = auto
format => 'twostate', # tristate can't be migrated from bin into hex!
preamble => 'u6#', # Append to converted message
#clientmodule => '',
#modulematch => '^u......',
length_min => '24',
#length_max => '36', # missing
},
"7" => ## weather sensors like EAS800z
# MS;P1=-3882;P2=504;P3=-957;P4=-1949;D=21232424232323242423232323232323232424232323242423242424242323232324232424;CP=2;SP=1;R=249;m=2;
{
name => 'weather',
comment => 'EAS800z, FreeTec NC-7344, HAMA TS34A',
id => '7',
knownFreqs => '433.92',
one => [1,-4],
zero => [1,-2],
sync => [1,-8],
clockabs => 484,
format => 'twostate',
preamble => 'P7#', # prepend to converted message
clientmodule => 'SD_WS07',
modulematch => '^P7#.{6}F.{2}',
length_min => '35',
length_max => '40',
},
"8" => ## TX3 (ITTX) Protocol
# MU;P0=-1046;P1=1339;P2=524;P3=-28696;D=010201010101010202010101010202010202020102010101020101010202020102010101010202310101010201020101010101020201010101020201020202010201010102010101020202010201010101020;CP=2;R=4;
{
name => 'TX3 Protocol',
id => '8',
knownFreqs => '',
one => [1,-2],
zero => [2,-2],
#sync => [1,-8], #
clockabs => 470,
format => 'pwm', #
preamble => 'TX', # prepend to converted message
clientmodule => 'CUL_TX',
modulematch => '^TX......',
length_min => '43',
length_max => '44',
remove_zero => 1, # Removes leading zeros from output
},
"9" => ## Funk Wetterstation CTW600
{
name => 'CTW 600',
comment => 'FunkWS WH1080/WH3080/CTW600',
id => '9',
knownFreqs => '',
zero => [3,-2],
one => [1,-2],
#float => [-1,3], # not full supported now, for later use
#sync => [1,-8], #
clockabs => 480, # -1 = auto undef=noclock
format => 'pwm', # tristate can't be migrated from bin into hex!
preamble => 'P9#', # prepend to converted message
clientmodule => 'SD_WS09',
#modulematch => '^u9#.....',
length_min => '60',
length_max => '120',
},
"10" => ## Oregon Scientific 2
{
name => 'Oregon Scientific v2|v3',
comment => 'temperature / humidity or other sensors',
id => '10',
knownFreqs => '',
clockrange => [300,520], # min , max
format => 'manchester', # tristate can't be migrated from bin into hex!
clientmodule => 'OREGON',
modulematch => '^(3[8-9A-F]|[4-6][0-9A-F]|7[0-8]).*',
length_min => '64',
length_max => '220',
method => \&SIGNALduino_OSV2, # Call to process this message
polarity => 'invert',
},
"11" => ## Arduino Sensor
{
name => 'Arduino',
comment => 'for Arduino based sensors',
id => '11',
knownFreqs => '',
clockrange => [380,425], # min , max
format => 'manchester', # tristate can't be migrated from bin into hex!
preamble => 'P2#', # prepend to converted message
clientmodule => 'SD_AS',
modulematch => '^P2#.{7,8}',
length_min => '52',
length_max => '56',
method => \&SIGNALduino_AS # Call to process this message
},
"12" => ## Hideki
# MC;LL=-1040;LH=904;SL=-542;SH=426;D=A8C233B53A3E0A0783;C=485;L=72;R=213;
{
name => 'Hideki',
comment => 'temperature / humidity or other sensors',
id => '12',
knownFreqs => '433.92',
clockrange => [420,510], # min, max better for Bresser Sensors, OK for hideki/Hideki/TFA too
format => 'manchester',
preamble => 'P12#', # prepend to converted message
clientmodule => 'hideki',
modulematch => '^P12#75.+',
length_min => '71',
length_max => '128',
method => \&SIGNALduino_Hideki, # Call to process this message
#polarity => 'invert',
},
"13" => ## FLAMINGO FA21
# https://github.com/RFD-FHEM/RFFHEM/issues/21
# https://github.com/RFD-FHEM/RFFHEM/issues/233
# MS;P0=-1413;P1=757;P2=-2779;P3=-16079;P4=8093;P5=-954;D=1345121210101212101210101012121012121210121210101010;CP=1;SP=3;R=33;O;
{
name => 'FLAMINGO FA21',
comment => 'FLAMINGO FA21 smoke detector (message decode as MS)',
id => '13',
knownFreqs => '433.92',
one => [1,-2],
zero => [1,-4],
sync => [1,-20,10,-1],
clockabs => 800,
format => 'twostate',
preamble => 'P13#', # prepend to converted message
clientmodule => 'FLAMINGO',
#modulematch => 'P13#.*',
length_min => '24',
length_max => '26',
},
"13.1" => ## FLAMINGO FA20RF
# MU;P0=-1384;P1=815;P2=-2725;P3=-20001;P4=8159;P5=-891;D=01010121212121010101210101345101210101210101212101010101012121212101010121010134510121010121010121210101010101212121210101012101013451012101012101012121010101010121212121010101210101345101210101210101212101010101012121212101010121010134510121010121010121;CP=1;O;
# MU;P0=-17201;P1=112;P2=-1419;P3=-28056;P4=8092;P5=-942;P6=777;P7=-2755;D=12134567676762626762626762626767676762626762626267626260456767676262676262676262676767676262676262626762626045676767626267626267626267676767626267626262676262604567676762626762626762626767676762626762626267626260456767676262676262676262676767676262676262;CP=6;O;
## FLAMINGO FA22RF (only MU Message)
# MU;P0=-5684;P1=8149;P2=-887;P3=798;P4=-1393;P5=-2746;P6=-19956;D=0123434353534353434343434343435343534343534353534353612343435353435343434343434343534353434353435353435361234343535343534343434343434353435343435343535343536123434353534353434343434343435343534343534353534353612343435353435343434343434343534353434353435;CP=3;R=0;
# Times measured
# Sync 8100 microSec, 900 microSec | Bit1 2700 microSec low - 800 microSec high | Bit0 1400 microSec low - 800 microSec high | Pause Repeat 20000 microSec | 1 Sync + 24Bit, Totaltime 65550 microSec without Sync
{
name => 'FLAMINGO FA22RF / FA21RF / LM-101LD',
comment => 'FLAMINGO | Unitec smoke detector (message decode as MU)',
id => '13.1',
knownFreqs => '433.92',
one => [1,-1.8],
zero => [1,-3.5],
start => [10,-1],
pause => [-25],
clockabs => 800,
format => 'twostate',
preamble => 'P13.1#', # prepend to converted message
clientmodule => 'FLAMINGO',
#modulematch => '^P13\.?1?#[A-Fa-f0-9]+',
length_min => '24',
length_max => '24',
},
"13.2" => ## LM-101LD Rauchm
# MS;P1=-2708;P2=796;P3=-1387;P4=-8477;P5=8136;P6=-904;D=2456212321212323232321212121212121212123212321212121;CP=2;SP=4;
{
name => 'LM-101LD',
comment => 'Unitec smoke detector (message decode as MS)',
id => '13',
knownFreqs => '433.92',
zero => [1,-1.8],
one => [1,-3.5],
sync => [1,-11,10,-1.2],
clockabs => 790,
format => 'twostate',
preamble => 'P13#', # prepend to converted message
clientmodule => 'FLAMINGO',
#modulematch => '',
length_min => '24',
length_max => '24',
},
"14" => ## LED X-MAS Chilitec model 22640
# https://github.com/RFD-FHEM/RFFHEM/issues/421 | https://forum.fhem.de/index.php/topic,94211.msg869214.html#msg869214
# MS;P0=988;P1=-384;P2=346;P3=-1026;P4=-4923;D=240123012301230123012323232323232301232323;CP=2;SP=4;R=0;O;m=1;
# MS;P0=-398;P1=974;P3=338;P4=-1034;P6=-4939;D=361034103410341034103434343434343410103434;CP=3;SP=6;R=0;
{
name => 'LED X-MAS',
comment => 'Chilitec model 22640',
id => '14',
knownFreqs => '433.92',
one => [3,-1],
zero => [1,-3],
sync => [1,-14],
clockabs => 350,
format => 'twostate',
preamble => 'P14#', # prepend to converted message
clientmodule => 'SD_UT',
#modulematch => '^P14#.*',
length_min => '20',
length_max => '20',
},
"15" => ## TCM 234759
{
name => 'TCM 234759 Bell',
comment => 'wireless doorbell TCM 234759 Tchibo',
id => '15',
knownFreqs => '',
one => [1,-1],
zero => [1,-2],
sync => [1,-45],
clockabs => 700,
format => 'twostate',
preamble => 'P15#', # prepend to converted message
clientmodule => 'SD_BELL',
modulematch => '^P15#.*',
length_min => '10',
length_max => '20',
},
"16" => ## Rohrmotor24 und andere Funk Rolladen / Markisen Motoren
# ! same definition how ID 72 !
# https://forum.fhem.de/index.php/topic,49523.0.html
# MU;P0=-1608;P1=-785;P2=288;P3=650;P4=-419;P5=4676;D=1212121213434212134213434212121343434212121213421213434212134345021213434213434342121212121343421213421343421212134343421212121342121343421213432;CP=2;
# MU;P0=-1562;P1=-411;P2=297;P3=-773;P4=668;P5=4754;D=1232341234141234141234141414123414123232341232341412323414150234123234123232323232323234123414123414123414141412341412323234123234141232341415023412323412323232323232323412341412341412341414141234141232323412323414123234142;CP=2;
{
name => 'Dooya',
comment => 'Rohrmotor24 and other radio shutters / awnings motors',
id => '16',
knownFreqs => '',
one => [2,-1],
zero => [1,-3],
start => [17,-5],
clockabs => 280,
format => 'twostate',
preamble => 'P16#', # prepend to converted message
clientmodule => 'Dooya',
#modulematch => '',
length_min => '39',
length_max => '40',
},
"17" => ## arctech / intertechno
# need more Device Infos / User Message
{
name => 'arctech / Intertechno',
id => '17',
knownFreqs => '',
one => [1,-5,1,-1],
zero => [1,-1,1,-5],
#one => [1,-5],
#zero => [1,-1],
sync => [1,-10],
float => [1,-1,1,-1],
end => [1,-40],
clockabs => -1, # -1 = auto
format => 'twostate', # tristate can't be migrated from bin into hex!
preamble => 'i', # Append to converted message
postamble => '00', # Append to converted message
clientmodule => 'IT',
modulematch => '^i......',
length_min => '32',
length_max => '34', # Don't know maximal lenth of a valid message
postDemodulation => \&SIGNALduino_bit2Arctec,
},
"17.1" => ## intertechno --> MU anstatt sonst MS (ID 17)
# MU;P0=344;P1=-1230;P2=-200;D=01020201020101020102020102010102010201020102010201020201020102010201020101020102020102010201020102010201010200;CP=0;R=0;
# MU;P0=346;P1=-1227;P2=-190;P4=-10224;P5=-2580;D=0102010102020101020201020101020102020102010102010201020102010201020201020102010201020101020102020102010102020102010201020104050201020102010102020101020201020101020102020102010102010201020102010201020201020102010201020101020102020102010102020102010201020;CP=0;R=0;
# MU;P0=351;P1=-1220;P2=-185;D=01 0201 0102 020101020201020101020102020102010102010201020102010201020201020102010201020101020102020102010201020102010201020100;CP=0;R=0;
# MU;P0=355;P1=-189;P2=-1222;P3=-10252;P4=-2604;D=01020201010201020201020101020102020102010201020102010201010201020102010201020201020101020102010201020102010201020 304 0102 01020102020101020201010201020201020101020102020102010201020102010201010201020102010201020201020101020102010201020102010201020 304 01020;CP=0;R=0;
# https://www.sweetpi.de/blog/329/ein-ueberblick-ueber-433mhz-funksteckdosen-und-deren-protokolle
{
name => 'Intertechno',
comment => 'PIR-1000 | ITT-1500',
id => '17.1',
knownFreqs => '433.92',
one => [1,-5,1,-1],
zero => [1,-1,1,-5],
clockabs => 230, # -1 = auto
format => 'twostate', # tristate can't be migrated from bin into hex!
preamble => 'i', # Append to converted message
postamble => '00', # Append to converted message
clientmodule => 'IT',
modulematch => '^i......',
length_min => '32',
length_max => '34', # Don't know maximal lenth of a valid message
postDemodulation => \&SIGNALduino_bit2Arctec,
},
"18" => ## Oregon Scientific v1
# MC;LL=-2721;LH=3139;SL=-1246;SH=1677;D=1A51FF47;C=1463;L=32;R=12;
{
name => 'Oregon Scientific v1',
comment => 'temperature / humidity or other sensors',
id => '18',
knownFreqs => '',
clockrange => [1400,1500], # min , max
format => 'manchester', # tristate can't be migrated from bin into hex!
preamble => '',
clientmodule => 'OREGON',
modulematch => '^[0-9A-F].*',
length_min => '32',
length_max => '32',
polarity => 'invert', # invert bits
method => \&SIGNALduino_OSV1 # Call to process this message
},
"19" => ## minify Funksteckdose
# https://github.com/RFD-FHEM/RFFHEM/issues/114
# MU;P0=293;P1=-887;P2=-312;P6=-1900;P7=872;D=6727272010101720172720101720172010172727272720;CP=0;
# MU;P0=9078;P1=-308;P2=180;P3=-835;P4=881;P5=309;P6=-1316;D=0123414141535353415341415353415341535341414141415603;CP=5;
{
name => 'minify',
comment => 'remote control RC202',
id => '19',
knownFreqs => '',
one => [3,-1],
zero => [1,-3],
clockabs => 300,
format => 'twostate',
preamble => 'u19#', # prepend to converted message
#clientmodule => '',
#modulematch => '',
length_min => '19',
length_max => '23', # not confirmed, length one more as MU Message
},
# "20" => ## Livolo
# # https://github.com/RFD-FHEM/RFFHEM/issues/29
# # MU;P0=-195;P1=151;P2=475;P3=-333;D=0101010101 02 01010101010101310101310101010101310101 02 01010101010101010101010101010101010101 02 01010101010101010101010101010101010101 02 010101010101013101013101;CP=1;
# #
# # protocol sends 24 to 47 pulses per message.
# # First pulse is the header and is 595 μs long. All subsequent pulses are either 170 μs (short pulse) or 340 μs (long pulse) long.
# # Two subsequent short pulses correspond to bit 0, one long pulse corresponds to bit 1. There is no footer. The message is repeated for about 1 second.
# # _____________ ___ _______
# # Start bit: | |___| bit 0: | |___| bit 1: | |___|
# {
# name => 'Livolo',
# comment => 'remote control / dimmmer / switch ...',
# id => '20',
# knownFreqs => '',
# one => [3],
# zero => [1],
# start => [5],
# clockabs => 110, #can be 90-140
# format => 'twostate',
# preamble => 'u20#', # prepend to converted message
# #clientmodule => '',
# #modulematch => '',
# length_min => '16',
# #length_max => '', # missing
# filterfunc => 'SIGNALduino_filterSign',
# },
"21" => ## Einhell Garagentor
# https://forum.fhem.de/index.php?topic=42373.0 | user have no RAWMSG
# static adress: Bit 1-28 | channel remote Bit 29-32 | repeats 31 | pause 20 ms
# Channelvalues dez
# 1 left 1x kurz | 2 left 2x kurz | 3 left 3x kurz | 5 right 1x kurz | 6 right 2x kurz | 7 right 3x kurz ... gedrückt
{
name => 'Einhell Garagedoor',
comment => 'remote control ISC HS 434/6',
id => '21',
knownFreqs => '',
one => [-3,1],
zero => [-1,3],
#sync => [-50,1],
start => [-50,1],
clockabs => 400, #ca 400us
format => 'twostate',
preamble => 'u21#', # prepend to converted message
#clientmodule => '',
#modulematch => '',
length_min => '32',
length_max => '32',
paddingbits => '1', # This will disable padding
},
"22" => ## HAMULiGHT LED Trafo
# https://forum.fhem.de/index.php?topic=89301.0
# MU;P0=-589;P1=209;P2=-336;P3=32001;P4=-204;P5=1194;P6=-1200;P7=602;D=0123414145610747474101010101074741010747410741074101010101074741010741074741414141456107474741010101010747410107474107410741010101010747410107410747414141414561074747410101010107474101074741074107410101010107474101074107474141414145610747474101010101074;CP=1;R=25;
# MU;P0=204;P1=-596;P2=598;P3=-206;P4=1199;P5=-1197;D=0123230123012301010101012323010123012323030303034501232323010101010123230101232301230123010101010123230101230123230303030345012323230101010101232301012323012301230101010101232301012301232303030303450123232301010101012323010123230123012301010101012323010;CP=0;R=25;
{
name => 'HAMULiGHT',
comment => 'remote control for LED Transformator',
id => '22',
knownFreqs => '433.92',
one => [1,-3],
zero => [3,-1],
start => [6,-6],
clockabs => 200, # ca 200us
format => 'twostate',
preamble => 'u22#', # prepend to converted message
#clientmodule => '',
#modulematch => '',
length_min => '32',
length_max => '32',
},
"23" => ## Pearl Sensor
{
name => 'Pearl',
comment => 'unknown sensortyp',
id => '23',
knownFreqs => '',
one => [1,-6],
zero => [1,-1],
sync => [1,-50],
clockabs => 200, #ca 200us
format => 'twostate',
preamble => 'u23#', # prepend to converted message
#clientmodule => '',
#modulematch => '',
length_min => '36',
length_max => '44',
},
"24" => ## visivon
# https://github.com/RFD-FHEM/RFFHEM/issues/39
# MU;P0=132;P1=500;P2=-233;P3=-598;P4=-980;P5=4526;D=012120303030303120303030453120303121212121203121212121203121212121212030303030312030312031203030303030312031203031212120303030303120303030453120303121212121203121212121203121212121212030303030312030312031203030303030312031203031212120303030;CP=0;O;
{
name => 'visivon remote',
id => '24',
knownFreqs => '',
one => [3,-2],
zero => [1,-5],
#one => [3,-2],
#zero => [1,-1],
start => [30,-5],
clockabs => 150, #ca 150us
format => 'twostate',
preamble => 'u24#', # prepend to converted message
#clientmodule => '',
#modulematch => '',
length_min => '54',
length_max => '58',
},
"25" => ## LES remote for led lamp
# https://github.com/RFD-FHEM/RFFHEM/issues/40
# MS;P0=-376;P1=697;P2=-726;P3=322;P4=-13188;P5=-15982;D=3530123010101230123230123010101010101232301230123234301230101012301232301230101010101012323012301232;CP=3;SP=5;O;
{
name => 'les led remote',
id => '25',
knownFreqs => '',
one => [-2,1],
zero => [-1,2],
sync => [-46,1], # this is a end marker, but we use this as a start marker
clockabs => 350, #ca 350us
format => 'twostate',
preamble => 'u25#', # prepend to converted message
#clientmodule => '',
#modulematch => '',
length_min => '24',
length_max => '50', # message has only 24 bit, but we get more than one message, calculation has to be corrected
},
"26" => ## some remote code send by flamingo style remote controls
# https://forum.fhem.de/index.php/topic,43292.msg352982.html#msg352982
# MU;P0=1086;P1=-433;P2=327;P3=-1194;P4=-2318;P5=2988;D=01012323010123010101230123012323232323010101232324010123230101230101012301230123232323230101012323240101232301012301010123012301232323232301010123232401012323010123010101230123012323232323010101232353;CP=2;
{
name => 'remote',
id => '26',
knownFreqs => '',
one => [1,-3],
zero => [3,-1],
# sync => [1,-6], # Message is not provided as MS, due to small fact
start => [1,-6], # Message is not provided as MS, due to small fact
clockabs => 380, #ca 380
format => 'twostate',
preamble => 'u26#', # prepend to converted message
#clientmodule => '',
#modulematch => '',
length_min => '24',
length_max => '24', # message has only 24 bit, but we get more than one message, calculation has to be corrected
},
"27" => ## some remote code, send by flamingo style remote controls
# https://forum.fhem.de/index.php/topic,43292.msg352982.html#msg352982
# MU;P0=963;P1=-559;P2=393;P3=-1134;P4=2990;P5=-7172;D=01012323010123010101230123012323232323010101232345010123230101230101012301230123232323230101012323450101232301012301010123012301232323232301010123234501012323010123010101230123012323232323010101232323;CP=2;
{
name => 'remote',
id => '27',
knownFreqs => '',
one => [1,-2],
zero => [2,-1],
start => [6,-15], # Message is not provided as MS, worakround is start
clockabs => 480, #ca 480
format => 'twostate',
preamble => 'u27#', # prepend to converted message
#clientmodule => '',
#modulematch => '',
length_min => '24',
length_max => '24',
},
"28" => ## some remote code, send by aldi IC Ledspots
{
name => 'IC Ledspot',
id => '28',
knownFreqs => '',
one => [1,-1],
zero => [1,-2],
start => [4,-5],
clockabs => 600, #ca 600
format => 'twostate',
preamble => 'u28#', # prepend to converted message
#clientmodule => '',
#modulematch => '',
length_min => '8',
length_max => '8',
},
"29" => ## example remote control with HT12E chip
# MU;P0=250;P1=-492;P2=166;P3=-255;P4=491;P5=-8588;D=052121212121234121212121234521212121212341212121212345212121212123412121212123452121212121234121212121234;CP=0;
# https://forum.fhem.de/index.php/topic,58397.960.html
{
name => 'HT12e',
comment => 'remote control for example Westinghouse airfan with 5 buttons',
id => '29',
knownFreqs => '',
one => [-2,1],
zero => [-1,2],
start => [-35,1], # Message is not provided as MS, worakround is start
clockabs => 235, # ca 220
format => 'twostate', # there is a pause puls between words
preamble => 'P29#', # prepend to converted message
clientmodule => 'SD_UT',
modulematch => '^P29#.{3}',
length_min => '12',
length_max => '12',
},
"30" => ## a unitec remote door reed switch
# https://forum.fhem.de/index.php?topic=43346.0
# MU;P0=-10026;P1=-924;P2=309;P3=-688;P4=-361;P5=637;D=123245453245324532453245320232454532453245324532453202324545324532453245324532023245453245324532453245320232454532453245324532453202324545324532453245324532023245453245324532453245320232454532453245324532453202324545324532453245324532023240;CP=2;O;
# MU;P0=307;P1=-10027;P2=-691;P3=-365;P4=635;D=0102034342034203420342034201020343420342034203420342010203434203420342034203420102034342034203420342034201020343420342034203420342010203434203420342034203420102034342034203420342034201;CP=0;
{
name => 'diverse',
comment => 'remote control unitec | door reed switch 47031',
id => '30',
knownFreqs => '',
one => [-2,1],
zero => [-1,2],
start => [-30,1], # Message is not provided as MS, worakround is start
clockabs => 330, # ca 300 us
format => 'twostate', # there is a pause puls between words
preamble => 'P30#', # prepend to converted message
clientmodule => 'SD_UT',
modulematch => '^P30#.{3}',
length_min => '12',
length_max => '12', # message has only 10 bit but is paddet to 12
},
"31" => ## Pollin ISOTRONIC - 12 Tasten remote
# remote basicadresse with 12bit -> changed if push reset behind battery cover
# https://github.com/RFD-FHEM/RFFHEM/issues/44
# MU;P0=-9584;P1=592;P2=-665;P3=1223;P4=-1311;D=01234141412341412341414123232323412323234;CP=1;R=0;
# MU;P0=-12724;P1=597;P2=-667;P3=1253;P4=-1331;D=01234141412341412341414123232323232323232;CP=1;R=0;
# MU;P0=-9588;P1=600;P2=-664;P3=1254;P4=-1325;D=01234141412341412341414123232323232323232;CP=1;R=0;
{
name => 'Pollin ISOTRONIC',
comment => 'remote control model 58608 with 12 buttons',
id => '31',
knownFreqs => '',
one => [-1,2],
zero => [-2,1],
start => [-18,1],
clockabs => 600,
format => 'twostate',
preamble => 'u31#', # prepend to converted message
#clientmodule => '',
#modulematch => '',
length_min => '19',
length_max => '20',
},
"32" => ## FreeTec PE-6946 -> http://www.free-tec.de/Funkklingel-mit-Voic-PE-6946-919.shtml
# OLD
# https://github.com/RFD-FHEM/RFFHEM/issues/49
# MS;P0=-266;P1=160;P3=-690;P4=580;P5=-6628;D=15131313401340134013401313404040404040404040404040;CP=1;SP=5;O;
# NEW
# https://github.com/RFD-FHEM/RFFHEM/issues/315
# MU;P0=-6676;P1=578;P2=-278;P4=-680;P5=176;P6=-184;D=541654165412545412121212121212121212121250545454125412541254125454121212121212121212121212;CP=1;R=0;
# MU;P0=146;P1=245;P3=571;P4=-708;P5=-284;P7=-6689;D=14351435143514143535353535353535353535350704040435043504350435040435353535353535353535353507040404350435043504350404353535353535353535353535070404043504350435043504043535353535353535353535350704040435043504350435040435353535353535353535353507040404350435;CP=3;R=0;O;
# MU;P0=-6680;P1=162;P2=-298;P4=253;P5=-699;P6=555;D=45624562456245456262626262626262626262621015151562156215621562151562626262626262626262626210151515621562156215621515626262626262626262626262;CP=6;R=0;
{
name => 'FreeTec PE-6946',
comment => 'wireless doorbell',
id => '32',
knownFreqs => '',
one => [4,-2],
zero => [1,-5],
start => [1,-45], # neuerdings MU Erknnung
#sync => [1,-49], # old MS Erkennung
clockabs => 150,
format => 'twostate',
preamble => 'P32#', # prepend to converted message
clientmodule => 'SD_BELL',
modulematch => '^P32#.*',
length_min => '24',
length_max => '24',
},
"33" => ## Thermo-/Hygrosensor S014, renkforce E0001PA, Conrad S522, TX-EZ6 (Weatherstation TZS First Austria)
# https://forum.fhem.de/index.php?topic=35844.0
# MS;P0=-7871;P2=-1960;P3=578;P4=-3954;D=030323232323434343434323232323234343434323234343234343234343232323432323232323232343234;CP=3;SP=0;R=0;m=0;
# sensor id=62, channel=1, temp=21.1, hum=76, bat=ok
# !! ToDo Tx-EZ6 neues Attribut ins Modul bauen um Trend + CRC auszuwerten !!
{
name => 'weather',
comment => 'S014, TFA 30.3200, TCM, Conrad S522, renkforce E0001PA, TX-EZ6',
id => '33',
knownFreqs => '433.92',
one => [1,-8],
zero => [1,-4],
sync => [1,-16],
clockabs => '500',
format => 'twostate', # not used now
preamble => 'W33#', # prepend to converted message
postamble => '', # Append to converted message
clientmodule => 'SD_WS',
#modulematch => '',
length_min => '42',
length_max => '44',
},
"34" => ## QUIGG GT-7000 Funk-Steckdosendimmer | transmitter DMV-7000 - receiver DMV-7009AS
# https://github.com/RFD-FHEM/RFFHEM/issues/195 | https://forum.fhem.de/index.php/topic,38831.msg361341.html#msg361341
# MU;P0=-5284;P1=583;P2=-681;P3=1216;P4=-1319;D=012341412323232341412341412323234123232341;CP=1;R=16; | MU;P0=-9812;P1=589;P2=-671;P3=1261;P4=-1320;D=012341412323232341412341412323232323232323;CP=3;R=19;
# MU;P0=-9832;P1=577;P2=-670;P3=1219;P4=-1331;D=012341412323232341412341414123234123234141;CP=1;R=16; | MU;P0=-8816;P1=594;P2=-662;P3=1263;P4=-1330;D=012341412323232341412341414123232323234123;CP=1;R=16;
# MU;P0=-677;P1=581;P2=1250;P3=-1319;D=010231310202020231310231310231023102020202;CP=1;R=18; | MU;P0=-29120;P1=603;P2=-666;P3=1235;P4=-1307;D=012341412323232341412341412341232323232341;CP=1;R=16;
{
name => 'QUIGG_GT-7000',
comment => 'remote control DMV-7000',
id => '34',
knownFreqs => '',
one => [-1,2],
zero => [-2,1],
start => [1],
pause => [-15], # 9900
clockabs => '660',
format => 'twostate',
preamble => 'P34#',
clientmodule => 'SD_UT',
#modulematch => '',
length_min => '20',
length_max => '20',
},
"35" => ## Homeeasy
# MS;P0=907;P1=-376;P2=266;P3=-1001;P6=-4860;D=2601010123230123012323230101012301230101010101230123012301;CP=2;SP=6;
{
name => 'HomeEasy HE800',
id => '35',
knownFreqs => '',
one => [1,-4],
zero => [3.4,-1],
sync => [1,-18],
clockabs => '280',
format => 'twostate', # not used now
preamble => 'ih', # prepend to converted message
postamble => '', # Append to converted message
clientmodule => 'IT',
#modulematch => '',
length_min => '28',
length_max => '40',
postDemodulation => \&SIGNALduino_HE800,
},
"36" => ## remote - cheap wireless dimmer
# https://forum.fhem.de/index.php/topic,38831.msg394238.html#msg394238
# MU;P0=499;P1=-1523;P2=-522;P3=10220;P4=-10047;D=01020202020202020134010102020101010201020202020102010202020202020201340101020201010102010202020201020102020202020202013401010202010101020102020202010201020202020202020134010102020101010201020202020102010202020202020201340101020201010102010;CP=0;O;
# MU;P0=-520;P1=500;P2=-1523;P3=10220;P4=-10043;D=01010101210121010101010101012341212101012121210121010101012101210101010101010123412121010121212101210101010121012101010101010101234121210101212121012101010101210121010101010101012341212101012121210121010101012101210101010101010123412121010;CP=1;O;
# MU;P0=498;P1=-1524;P2=-521;P3=10212;P4=-10047;D=01010102010202020201020102020202020202013401010202010101020102020202010201020202020202020134010102020101010201020202020102010202020202020201340101020201010102010202020201020102020202020202013401010202010101020102020202010201020202020202020;CP=0;O;
{
name => 'remote',
comment => 'cheap wireless dimmer',
id => '36',
knownFreqs => '433.92',
one => [1,-3],
zero => [1,-1],
start => [20,-20],
clockabs => '500',
format => 'twostate', # not used now
preamble => 'u36#', # prepend to converted message
postamble => '', # Append to converted message
#clientmodule => '',
#modulematch => '',
length_min => '24',
length_max => '24',
},
"37" => ## Bresser 7009994
# MU;P0=729;P1=-736;P2=483;P3=-251;P4=238;P5=-491;D=010101012323452323454523454545234523234545234523232345454545232345454545452323232345232340;CP=4;
# MU;P0=-790;P1=-255;P2=474;P4=226;P6=722;P7=-510;D=721060606060474747472121212147472121472147212121214747212147474721214747212147214721212147214060606060474747472121212140;CP=4;R=216;
# short pulse of 250 us followed by a 500 us gap is a 0 bit
# long pulse of 500 us followed by a 250 us gap is a 1 bit
# sync preamble of pulse, gap, 750 us each, repeated 4 times
{
name => 'Bresser 7009994',
comment => 'temperature / humidity sensor',
id => '37',
knownFreqs => '',
one => [2,-1],
zero => [1,-2],
start => [3,-3,3,-3],
clockabs => '250',
format => 'twostate', # not used now
preamble => 'W37#', # prepend to converted message
clientmodule => 'SD_WS',
length_min => '40',
length_max => '41',
},
"38" => ## Rosenstein & Söhne / PEARL - NC-3911-675 / NC-3912-675 | refrigerator thermometer - 2 channels
# https://github.com/RFD-FHEM/RFFHEM/issues/504 | https://forum.fhem.de/index.php/topic,96827.msg901158.html#msg901158
# MU;P0=252;P1=-478;P2=497;P3=-237;P4=-960;P5=737;P6=-727;CP=0;D=01232323232323012301010123012323010101012323010101232323010123230101 0456565656 012301232323232323012301010123012323010101012323010101232323010123230101 0456565656 012301232323232323012301010123012323010101012323010101232323010123230101 04565656560123012323232323230123010101230123230101010123230101012323230101232301010456565656012301232323232323012301010123012323010101012323010101232323010123230101045656565601230123232323232301230101012301232301010101232301010123232301012323010104565656560123012323232323230123010101230123230101010123230101012323230101232301010456565656012301232323232323012301010123012323010101012323010101232323010123230101045656565601230123232323232301230101012301232301010101232301010123232301012323010104565656560123012323232323230123010101230123230101010123230101012323230101232301010456565656012301232323232323012301010123012323010101012323010101232323010123230101045656565601230123232323232301230101012301232301010101232301010123232301012323010104565656560123012323232323230123010101;o3;<3B>
{
name => 'NC-3911-675',
comment => 'refrigerator thermometer',
id => '38',
knownFreqs => '433.92',
one => [2,-1],
zero => [1,-2],
start => [3,-3,3,-3,3,-3,3,-3],
clockabs => 250,
format => 'twostate',
preamble => 'u38#',
length_min => '36',
length_max => '36',
#clientmodule => '',
#modulematch => '^P38#.*',
#developId => 'y',
},
"39" => ## X10 Protocol
# https://github.com/RFD-FHEM/RFFHEM/issues/65
# MU;P0=10530;P1=-2908;P2=533;P3=-598;P4=-1733;P5=767;D=0123242323232423242324232324232423242323232324232323242424242324242424232423242424232501232423232324232423242323242324232423232323242323232424242423242424242324232424242325012324232323242324232423232423242324232323232423232324242424232424242423242324242;CP=2;O;
{
name => 'X10 Protocol',
id => '39',
knownFreqs => '',
one => [1,-3],
zero => [1,-1],
start => [17,-7],
clockabs => 560,
format => 'twostate',
preamble => '', # prepend to converted message
clientmodule => 'RFXX10REC',
#modulematch => '^TX......',
length_min => '32',
length_max => '44',
paddingbits => '8',
postDemodulation => \&SIGNALduino_lengtnPrefix,
filterfunc => 'SIGNALduino_compPattern',
},
"40" => ## Romotec
# https://github.com/RFD-FHEM/RFFHEM/issues/71
# MU;P0=300;P1=-772;P2=674;P3=-397;P4=4756;P5=-1512;D=4501232301230123230101232301010123230101230103;CP=0;
# MU;P0=-132;P1=-388;P2=675;P4=271;P5=-762;D=012145212145452121454545212145452145214545454521454545452145454541;CP=4;
{
name => 'Romotec ',
comment => 'Tubular motor',
id => '40',
knownFreqs => '',
one => [3,-2],
zero => [1,-3],
start => [1,-2],
clockabs => 270,
preamble => 'u40#', # prepend to converted message
#clientmodule => '',
#modulematch => '',
length_min => '12',
#length_max => '', # missing
},
"41" => ## Elro (Smartwares) Doorbell DB200 / 16 melodies
# https://github.com/RFD-FHEM/RFFHEM/issues/70
# MS;P0=-526;P1=1450;P2=467;P3=-6949;P4=-1519;D=231010101010242424242424102424101010102410241024101024241024241010;CP=2;SP=3;O;
# MS;P0=468;P1=-1516;P2=1450;P3=-533;P4=-7291;D=040101230101010123230101232323012323010101012301232323012301012323;CP=0;SP=4;O;
# unitec Modell:98156+98YK / 36 melodies
# repeats 15, change two codes every 15 repeats --> one button push, 2 codes
# MS;P0=1474;P1=-521;P2=495;P3=-1508;P4=-6996;D=242323232301232323010101230123232301012301230123010123230123230101;CP=2;SP=4;R=51;m=0;
# MS;P1=-7005;P2=482;P3=-1511;P4=1487;P5=-510;D=212345454523452345234523232345232345232323234523454545234523234545;CP=2;SP=1;R=47;m=2;
## KANGTAI Doorbell (Pollin 94-550405)
# https://github.com/RFD-FHEM/RFFHEM/issues/365
# The bell button alternately sends two different codes
# P41#BA2885D3: MS;P0=1390;P1=-600;P2=409;P3=-1600;P4=-7083;D=240123010101230123232301230123232301232323230123010101230123230101;CP=2;SP=4;R=248;O;m0;
# P41#BA2885D3: MS;P0=1399;P1=-604;P2=397;P3=-1602;P4=-7090;D=240123010101230123232301230123232301232323230123010101230123230101;CP=2;SP=4;R=248;O;m1;
# P41#1791D593: MS;P1=403;P2=-7102;P3=-1608;P4=1378;P5=-620;D=121313134513454545451313451313134545451345134513454513134513134545;CP=1;SP=2;R=5;O;m0;
{
name => 'wireless doorbell',
comment => 'Elro (DB200) / KANGTAI (Pollin 94-550405) / unitec',
id => '41',
knownFreqs => '433.92',
zero => [1,-3],
one => [3,-1],
sync => [1,-14],
clockabs => 500,
format => 'twostate',
preamble => 'P41#', # prepend to converted message
clientmodule => 'SD_BELL',
modulematch => '^P41#.*',
length_min => '32',
length_max => '32',
},
"42" => ## Pollin 551227
# https://github.com/RFD-FHEM/RFFHEM/issues/390
# MU;P0=1446;P1=-487;P2=477;D=0101012121212121212121212101010101212121212121212121210101010121212121212121212121010101012121212121212121212101010101212121212121212121210101010121212121212121212121010101012121212121212121212101010101212121212121212121210101010121212121212121212121010;CP=2;R=93;O;
# MU;P0=-112;P1=1075;P2=-511;P3=452;P5=1418;D=01212121232323232323232323232525252523232323232323232323252525252323232323232323232325252525;CP=3;R=77;
{
name => 'wireless doorbell',
comment => 'Pollin 551227',
id => '42',
knownFreqs => '433.92',
one => [1,-1],
zero => [3,-1],
start => [1,-1,1,-1,1,-1,],
clockabs => 500,
format => 'twostate',
preamble => 'P42#',
clientmodule => 'SD_Bell',
#modulematch => '^P42#.*',
length_min => '28',
length_max => '120',
},
"43" => ## Somfy RTS
# MC;LL=-1405;LH=1269;SL=-723;SH=620;D=98DBD153D631BB;C=669;L=56;R=229;
{
name => 'Somfy RTS',
id => '43',
knownFreqs => '',
clockrange => [610,680], # min , max
format => 'manchester',
preamble => 'Ys',
clientmodule => 'SOMFY', # not used now
modulematch => '^Ys[0-9A-F]{14}',
length_min => '56',
length_max => '57',
method => \&SIGNALduino_SomfyRTS, # Call to process this message
msgIntro => 'SR;P0=-2560;P1=2560;P3=-640;D=10101010101010113;',
#msgOutro => 'SR;P0=-30415;D=0;',
frequency => '10AB85550A',
},
"44" => ## Bresser Temeo Trend
{
name => 'BresserTemeo',
comment => 'temperature / humidity sensor',
id => '44',
knownFreqs => '',
clockabs => 500,
zero => [4,-4],
one => [4,-8],
start => [8,-8],
preamble => 'W44#',
clientmodule => 'SD_WS',
modulematch => '^W44#[A-F0-9]{18}',
length_min => '64',
length_max => '72',
},
"44.1" => ## Bresser Temeo Trend
{
name => 'BresserTemeo',
comment => 'temperature / humidity sensor',
id => '44',
knownFreqs => '',
clockabs => 500,
zero => [4,-4],
one => [4,-8],
start => [8,-12],
preamble => 'W44x#',
clientmodule => 'SD_WS',
modulematch => '^W44x#[A-F0-9]{18}',
length_min => '64',
length_max => '72',
},
"45" => ## Revolt
# MU;P0=-8320;P1=9972;P2=-376;P3=117;P4=-251;P5=232;D=012345434345434345454545434345454545454543454343434343434343434343434543434345434343434545434345434343434343454343454545454345434343454345434343434343434345454543434343434345434345454543454343434543454345434545;CP=3;R=2
{
name => 'Revolt',
id => '45',
knownFreqs => '',
one => [2,-2],
zero => [1,-2],
start => [83,-3],
clockabs => 120,
preamble => 'r', # prepend to converted message
clientmodule => 'Revolt',
modulematch => '^r[A-Fa-f0-9]{22}',
length_min => '84',
length_max => '120',
postDemodulation => sub { my ($name, @bit_msg) = @_; my @new_bitmsg = splice @bit_msg, 0,88; return 1,@new_bitmsg; },
},
"46" => ## Berner Garagentorantrieb GA401
# remote TEDSEN SKX1MD 433.92 MHz - 1 button | settings via 9 switch on battery compartment
# compatible with doors: BERNER SKX1MD, ELKA SKX1MD, TEDSEN SKX1LC, TEDSEN SKX1
# https://github.com/RFD-FHEM/RFFHEM/issues/91
# door open
# MU;P0=-15829;P1=-3580;P2=1962;P3=-330;P4=245;P5=-2051;D=1234523232345234523232323234523234540023452323234523452323232323452323454023452323234523452323232323452323454023452323234523452323232323452323454023452323234523452323232323452323454023452323234523452323;CP=2;
# door close
# MU;P0=-1943;P1=1966;P2=-327;P3=247;P5=-15810;D=01230121212301230121212121230121230351230121212301230121212121230121230351230121212301230121212121230121230351230121212301230121212121230121230351230121212301230121212121230121230351230;CP=1;
{
name => 'Berner Garagedoor GA401',
comment => 'remote control TEDSEN SKX1MD',
id => '46',
knownFreqs => '',
one => [1,-8],
zero => [8,-1],
start => [1,-63],
clockabs => 250, # -1=auto
format => 'twostate', # not used now
preamble => 'P46#',
clientmodule => 'SD_UT',
modulematch => '^P46#.*',
length_min => '16',
length_max => '18',
},
"47" => ## Maverick
# MC;LL=-507;LH=490;SL=-258;SH=239;D=AA9995599599A959996699A969;C=248;L=104;
{
name => 'Maverick',
comment => 'BBQ / food thermometer',
id => '47',
knownFreqs => '',
clockrange => [180,260],
format => 'manchester',
preamble => 'P47#', # prepend to converted message
clientmodule => 'SD_WS_Maverick',
modulematch => '^P47#[569A]{12}.*',
length_min => '100',
length_max => '108',
method => \&SIGNALduino_Maverick, # Call to process this message
#polarity => 'invert'
},
"48" => ## Joker Dostmann TFA 30.3055.01
# https://github.com/RFD-FHEM/RFFHEM/issues/92
# MU;P0=591;P1=-1488;P2=-3736;P3=1338;P4=-372;P6=-988;D=23406060606063606363606363606060636363636363606060606363606060606060606060606060636060636360106060606060606063606363606363606060636363636363606060606363606060606060606060606060636060636360106060606060606063606363606363606060636363636363606060606363606060;CP=0;O;
# MU;P0=96;P1=-244;P2=510;P3=-1000;P4=1520;P5=-1506;D=01232323232343234343232343234323434343434343234323434343232323232323232323232323234343234325232323232323232343234343232343234323434343434343234323434343232323232323232323232323234343234325232323232323232343234343232343234323434343434343234323434343232323;CP=2;O;
{
name => 'TFA Dostmann',
comment => 'Funk-Thermometer Joker TFA 30.3055.01',
id => '48',
knownFreqs => '',
clockabs => 250, # In real it is 500 but this leads to unprceise demodulation
one => [-4,6],
zero => [-4,2],
start => [-6,2],
format => 'twostate',
preamble => 'U48#', # prepend to converted message
#clientmodule => '',
modulematch => '^U48#.*',
length_min => '47',
length_max => '48',
},
"49" => ## QUIGG / ALDI GT-9000
# https://github.com/RFD-FHEM/RFFHEM/issues/93
# MU;P0=-563;P1=479;P2=991;P3=-423;P4=361;P5=-1053;P6=3008;P7=-7110;D=2345454523452323454523452323452323452323454545456720151515201520201515201520201520201520201515151567201515152015202015152015202015202015202015151515672015151520152020151520152020152020152020151515156720151515201520201515201520201520201520201515151;CP=1;R=21;
{
name => 'QUIGG_GT-9000',
comment => 'remote control',
id => '49',
knownFreqs => '',
clockabs => 400,
one => [2,-1.2],
zero => [1,-3],
start => [6,-15],
format => 'twostate',
preamble => 'U49#', # prepend to converted message
#clientmodule => '',
modulematch => '^U49#.*',
length_min => '22',
length_max => '28',
},
"50" => ## Opus XT300
# https://github.com/RFD-FHEM/RFFHEM/issues/99
# MU;P0=248;P1=-21400;P2=545;P3=-925;P4=1368;P5=-12308;D=01232323232323232343234323432343234343434343234323432343434343432323232323232323232343432323432345232323232323232343234323432343234343434343234323432343434343432323232323232323232343432323432345232323232323232343234323432343234343434343234323432343434343;CP=2;O;
{
name => 'Opus_XT300',
comment => 'sensor for ground humidity',
id => '50',
knownFreqs => '',
clockabs => 500,
zero => [3,-2],
one => [1,-2],
# start => [1,-25], # Wenn das startsignal empfangen wird, fehlt das 1 bit
format => 'twostate',
preamble => 'W50#', # prepend to converted message
clientmodule => 'SD_WS',
modulematch => '^W50#.*',
length_min => '47',
length_max => '48',
},
"51" => ## weather sensors
# MS;P0=-16046;P1=552;P2=-1039;P3=983;P5=-7907;P6=-1841;P7=-4129;D=15161716171616161717171716161616161617161717171717171617171617161716161616161616171032323232;CP=1;SP=5;O;
# https://github.com/RFD-FHEM/RFFHEM/issues/118
{
name => 'weather',
comment => 'IAN 275901 Wetterstation Lidl',
id => '51',
knownFreqs => '',
one => [1,-8],
zero => [1,-4],
sync => [1,-13],
clockabs => '560',
format => 'twostate', # not used now
preamble => 'W51#', # prepend to converted message
postamble => '', # Append to converted message
clientmodule => 'SD_WS',
modulematch => '^W51#.*',
length_min => '40',
length_max => '45',
},
"52" => ## Oregon Scientific PIR Protocol
# https://forum.fhem.de/index.php/topic,63604.msg548256.html#msg548256
# MC;LL=-1045;LH=1153;SL=-494;SH=606;D=FFFED518;C=549;L=30;
#
# FFFED5 = Adresse, die per DIP einstellt wird, FFF ändert sich nie
# 1 = Kanal, per gesondertem DIP, bei mir bei beiden 1 (CH 1) oder 3 (CH 2)
# C = wechselt, 0, 4, 8, C - dann fängt es wieder mit 0 an und wiederholt sich bei jeder Bewegung
{
name => 'Oregon Scientific PIR',
id => '52',
knownFreqs => '',
clockrange => [470,640], # min , max
format => 'manchester', # tristate can't be migrated from bin into hex!
clientmodule => 'OREGON',
modulematch => '^u52#F{3}|0{3}.*',
preamble => 'u52#',
length_min => '30',
length_max => '30',
method => \&SIGNALduino_OSPIR, # Call to process this message
polarity => 'invert',
},
"55" => ## QUIGG GT-1000
{
name => 'QUIGG_GT-1000',
comment => 'remote control',
id => '55',
knownFreqs => '',
clockabs => 300,
zero => [1,-4],
one => [4,-2],
sync => [1,-8],
format => 'twostate',
preamble => 'i', # prepend to converted message
clientmodule => 'IT',
modulematch => '^i.*',
length_min => '24',
length_max => '24',
},
"56" => ## Celexon
{
name => 'Celexon',
id => '56',
knownFreqs => '',
clockabs => 200,
zero => [1,-3],
one => [3,-1],
start => [25,-3],
format => 'twostate',
preamble => 'u56#', # prepend to converted message
#clientmodule => '',
modulematch => '',
length_min => '56',
length_max => '68',
},
"57" => ## m-e doorbell fuer FG- und Basic-Serie
# https://forum.fhem.de/index.php/topic,64251.0.html
# MC;LL=-653;LH=665;SL=-317;SH=348;D=D55B58;C=330;L=21;
# MC;LL=-654;LH=678;SL=-314;SH=351;D=D55B58;C=332;L=21;
# MC;LL=-653;LH=679;SL=-310;SH=351;D=D55B58;C=332;L=21;
{
name => 'm-e',
comment => 'radio gong transmitter for FG- and Basic-Serie',
id => '57',
knownFreqs => '',
clockrange => [300,360], # min , max
format => 'manchester', # tristate can't be migrated from bin into hex!
clientmodule => 'SD_BELL',
modulematch => '^P57#.*',
preamble => 'P57#',
length_min => '21',
length_max => '24',
method => \&SIGNALduino_MCRAW, # Call to process this message
polarity => 'invert',
},
"58" => ## TFA 30.3208.0
# MC;LL=-981;LH=964;SL=-480;SH=520;D=002BA37EBDBBA24F0015D1BF5EDDD127800AE8DFAF6EE893C;C=486;L=194;
{
name => 'TFA 30.3208.0',
comment => 'temperature / humidity sensor',
id => '58',
#knownFreqs => '',
clockrange => [460,520], # min , max
format => 'manchester', # tristate can't be migrated from bin into hex!
clientmodule => 'SD_WS',
modulematch => '^W58*',
preamble => 'W58#',
length_min => '52', # 54
length_max => '52', # 136
method => \&SIGNALduino_MCTFA, # Call to process this message
polarity => 'invert',
},
"59" => ## AK-HD-4 remote | 4 Buttons
# https://github.com/RFD-FHEM/RFFHEM/issues/133
# MU;P0=819;P1=-919;P2=234;P3=-320;P4=8602;P6=156;D=01230301230301230303012123012301230303030301230303412303012303012303030121230123012303030303012303034123030123030123030301212301230123030303030123030341230301230301230303012123012301230303030301230303412303012303012303030121230123012303030303012303034163;CP=0;O;
# MU;P0=-334;P2=8581;P3=237;P4=-516;P5=782;P6=-883;D=23456305056305050563630563056305050505056305050263050563050563050505636305630563050505050563050502630505630505630505056363056305630505050505630505026305056305056305050563630563056305050505056305050263050563050563050505636305630563050505050563050502630505;CP=5;O;
{
name => 'AK-HD-4',
comment => 'remote control with 4 buttons',
id => '59',
knownFreqs => '',
clockabs => 230,
zero => [-4,1],
one => [-1,4],
start => [-1,37],
format => 'twostate', # tristate can't be migrated from bin into hex!
preamble => 'u59#', # Append to converted message
postamble => '', # Append to converted message
#clientmodule => '',
modulematch => '',
length_min => '24',
length_max => '24',
},
"60" => ## ELV, LA CROSSE (WS2000/WS7000)
# MU;P0=32001;P1=-381;P2=835;P3=354;P4=-857;D=01212121212121212121343421212134342121213434342121343421212134213421213421212121342121212134212121213421212121343421343430;CP=2;R=53;
# tested sensors: WS-7000-20, AS2000, ASH2000, S2000, S2000I, S2001A, S2001IA,
# ASH2200, S300IA, S2001I, S2000ID, S2001ID, S2500H
# not tested: AS3, S2000W, S2000R, WS7000-15, WS7000-16, WS2500-19, S300TH, S555TH
# das letzte Bit (1) und mehrere Bit (0) Preambel fehlen meistens
# ___ _
# | |_ | |___
# Bit 0 Bit 1
# kurz 366 mikroSek / lang 854 mikroSek / gesamt 1220 mikroSek - Sollzeiten
{
name => 'WS2000',
comment => 'Series WS2000/WS7000 of various sensors',
id => '60',
knownFreqs => '',
one => [3,-7],
zero => [7,-3],
clockabs => 122,
preamble => 'K', # prepend to converted message
postamble => '', # Append to converted message
clientmodule => 'CUL_WS',
length_min => '38', # 46, letztes Bit fehlt = 45, 10 Bit Preambel = 35 Bit Daten
length_max => '82',
postDemodulation => \&SIGNALduino_postDemo_WS2000,
},
"61" => ## ELV FS10
# tested transmitter: FS10-S8, FS10-S4, FS10-ZE
# tested receiver: FS10-ST, FS10-MS, WS3000-TV, PC-Wettersensor-Empfaenger
# sends 2 messages with 43 or 48 bits in distance of 100 mS (on/off) , last bit 1 is missing
# sends x messages with 43 or 48 bits in distance of 200 mS (dimm) , repeats second message
# MU;P0=1776;P1=-410;P2=383;P3=-820;D=01212121212121212121212123212121232323212323232121212323232121212321212123232123212120;CP=2;R=74;
# __ __
# | |__ | |____
# Bit 0 Bit 1
# kurz 400 mikroSek / lang 800 mikroSek / gesamt 800 mikroSek = 0, gesamt 1200 mikroSek = 1 - Sollzeiten
{
name => 'FS10',
comment => 'remote control',
id => '61',
knownFreqs => '433.92',
one => [1,-2],
zero => [1,-1],
clockabs => 400,
pause => [-81], # 400*81=32400*6=194400 - pause between repeats of send messages (clockabs*pause must be < 32768)
format => 'twostate',
preamble => 'P61#', # prepend to converted message
postamble => '', # Append to converted message
clientmodule => 'FS10',
#modulematch => '',
length_min => '38', # eigentlich 41 oder 46 (Pruefsumme nicht bei allen)
length_max => '48', # eigentlich 46
},
"62" => ## Clarus_Switch
# MU;P0=-5893;P4=-634;P5=498;P6=-257;P7=116;D=45656567474747474745656707456747474747456745674567456565674747474747456567074567474747474567456745674565656747474747474565670745674747474745674567456745656567474747474745656707456747474747456745674567456565674747474747456567074567474747474567456745674567;CP=7;O;
{
name => 'Clarus_Switch',
id => '62',
knownFreqs => '',
one => [3,-1],
zero => [1,-3],
start => [1,-35], # ca 30-40
clockabs => 189,
preamble => 'i', # prepend to converted message
clientmodule => 'IT',
#modulematch => '',
length_min => '24',
length_max => '24',
},
"63" => ## Warema MU
# https://forum.fhem.de/index.php/topic,38831.msg395978/topicseen.html#msg395978 | https://www.mikrocontroller.net/topic/264063
# MU;P0=-2988;P1=1762;P2=-1781;P3=-902;P4=871;P5=6762;P6=5012;D=0121342434343434352434313434243521342134343436;
# MU;P0=6324;P1=-1789;P2=864;P3=-910;P4=1756;D=0123234143212323232323032321234141032323232323232323;CP=2;
{
name => 'Warema',
comment => 'radio shutter switch (is still experimental)',
id => '63',
knownFreqs => '',
developId => 'y',
one => [1],
zero => [0],
clockabs => 800,
syncabs => '6700', # Special field for filterMC function
preamble => 'u63#', # prepend to converted message
#clientmodule => '',
#modulematch => '',
length_min => '24',
#length_max => '', # missing
filterfunc => 'SIGNALduino_filterMC',
},
"64" => ## WH2 #############################################################################
# MU;P0=-32001;P1=457;P2=-1064;P3=1438;D=0123232323212121232123232321212121212121212323212121232321;CP=1;R=63;
# MU;P0=-32001;P1=473;P2=-1058;P3=1454;D=0123232323212121232123232121212121212121212121232321212321;CP=1;R=51;
# MU;P0=134;P1=-113;P3=412;P4=-1062;P5=1379;D=01010101013434343434343454345454345454545454345454545454343434545434345454345454545454543454543454345454545434545454345;CP=3;
{
name => 'WH2',
comment => 'temperature / humidity sensor',
id => '64',
knownFreqs => '',
one => [1,-2],
zero => [3,-2],
clockabs => 490,
clientmodule => 'SD_WS',
modulematch => '^W64*',
preamble => 'W64#', # prepend to converted message
postamble => '', # Append to converted message
#clientmodule => '',
length_min => '48',
length_max => '54',
},
"65" => ## Homeeasy
# MS;P1=231;P2=-1336;P4=-312;P5=-8920;D=15121214141412121212141414121212121414121214121214141212141212141212121414121414141212121214141214121212141412141212;CP=1;SP=5;
{
name => 'HomeEasy HE_EU',
id => '65',
knownFreqs => '',
one => [1,-5.5],
zero => [1,-1.2],
sync => [1,-38],
clockabs => 230,
format => 'twostate', # not used now
preamble => 'ih',
clientmodule => 'IT',
length_min => '57',
length_max => '72',
postDemodulation => \&SIGNALduino_HE_EU,
},
"66" => ## TX2 Protocol (Remote Temp Transmitter & Remote Thermo Model 7035)
# https://github.com/RFD-FHEM/RFFHEM/issues/160
# MU;P0=13312;P1=-2785;P2=4985;P3=1124;P4=-6442;P5=3181;P6=-31980;D=0121345434545454545434545454543454545434343454543434545434545454545454343434545434343434545621213454345454545454345454545434545454343434545434345454345454545454543434345454343434345456212134543454545454543454545454345454543434345454343454543454545454545;CP=3;R=73;O;
{
name => 'WS7035',
comment => 'temperature sensor',
id => '66',
knownFreqs => '',
one => [10,-52],
zero => [27,-52],
start => [-21,42,-21],
clockabs => 122,
format => 'pwm', # not used now
preamble => 'TX',
clientmodule => 'CUL_TX',
modulematch => '^TX......',
length_min => '43',
length_max => '44',
postDemodulation => \&SIGNALduino_postDemo_WS7035,
},
"67" => ## TX2 Protocol (Remote Datalink & Remote Thermo Model 7053, 7054)
# https://github.com/RFD-FHEM/RFFHEM/issues/162
# MU;P0=3381;P1=-672;P2=-4628;P3=1142;P4=-30768;D=010 2320232020202020232020232020202320232323202323202020202020202020 4 010 2320232020202020232020232020202320232323202323202020202020202020 0;CP=0;R=45;
# MU;P0=1148;P1=3421;P6=-664;P7=-4631;D=161 7071707171717171707171707171717171707070717071717171707071717171 0;CP=1;R=29;
# Message repeats 4 x with pause of ca. 30-34 mS
# __ ____
# ________| | ________| |
# Bit 1 Bit 0
# 4630 1220 4630 3420 mikroSek - mit Oszi gemessene Zeiten
{
name => 'WS7053',
comment => 'temperature sensor',
id => '67',
knownFreqs => '',
one => [-38,10], # -4636, 1220
zero => [-38,28], # -4636, 3416
clockabs => 122,
preamble => 'TX', # prepend to converted message
clientmodule => 'CUL_TX',
modulematch => '^TX......',
length_min => '32',
length_max => '34',
postDemodulation => \&SIGNALduino_postDemo_WS7053,
},
# "68" => can use
"69" => ## Hoermann HSM2, HSM4, HS1-868-BS (868 MHz)
# https://github.com/RFD-FHEM/RFFHEM/issues/149
# MU;P0=-508;P1=1029;P2=503;P3=-1023;P4=12388;D=01010232323232310104010101010101010102323231010232310231023232323231023101023101010231010101010232323232310104010101010101010102323231010232310231023232323231023101023101010231010101010232323232310104010101010101010102323231010232310231023232323231023101;CP=2;R=37;O;
# Remote control HS1-868-BS (one button):
# https://github.com/RFD-FHEM/RFFHEM/issues/344
# MU;P0=-578;P1=1033;P2=506;P3=-1110;P4=13632;D=0101010232323101040101010101010101023232323102323101010231023102310231010232323101010101010101010232323101040101010101010101023232323102323101010231023102310231010232323101010101010101010232323101040101010101010101023232323102323101010231023102310231010;CP=2;R=77;
# MU;P0=-547;P1=1067;P2=553;P3=-1066;P4=13449;D=0101010101010232323101040101010101010101023232323102323101010231023102310231010232323101010101010101010232323101040101010101010101023232323102323101010231023102310231010232323101010101010101010232323101040101010101010101023232323102323101010231023102310;CP=2;R=71;
# https://forum.fhem.de/index.php/topic,71877.msg642879.html (HSM4, Taste 1-4)
# MU;P0=-332;P1=92;P2=-1028;P3=12269;P4=-510;P5=1014;P6=517;D=01234545454545454545462626254546262546254626262626254625454625454546254545454546262626262545434545454545454545462626254546262546254626262626254625454625454546254545454546262626262545434545454545454545462626254546262546254626262626254625454625454546254545;CP=6;R=37;O;
# MU;P0=509;P1=-10128;P2=1340;P3=-517;P4=1019;P5=-1019;P6=12372;D=01234343434343434343050505434305054305430505050505430543430543434305434343430543050505054343634343434343434343050505434305054305430505050505430543430543434305434343430543050505054343634343434343434343050505434305054305430505050505430543430543434305434343;CP=0;R=52;O;
# MU;P0=12376;P1=360;P2=-10284;P3=1016;P4=-507;P6=521;P7=-1012;D=01234343434343434343467676734346767346734676767676734673434673434346734343434676767346767343404343434343434343467676734346767346734676767676734673434673434346734343434676767346767343404343434343434343467676734346767346734676767676734673434673434346734343;CP=6;R=55;O;
# MU;P0=-3656;P1=12248;P2=-519;P3=1008;P4=506;P5=-1033;D=01232323232323232324545453232454532453245454545453245323245323232453232323245453245454532321232323232323232324545453232454532453245454545453245323245323232453232323245453245454532321232323232323232324545453232454532453245454545453245323245323232453232323;CP=4;R=48;O;
{
name => 'Hoermann',
comment => 'remote control HS1-868-BS, HSM4',
id => '69',
knownFreqs => '',
zero => [2,-1], # 1020,510
one => [1,-2], # 510,1020
start => [25,-1], # 12750,510
clockabs => 510,
format => 'twostate',
clientmodule => 'SD_UT',
modulematch => '^P69#.{11}',
preamble => 'P69#',
length_min => '44',
length_max => '44',
},
"70" => ## FHT80TF (Funk-Tuer-Fenster-Melder FHT 80TF und FHT 80TF-2)
# https://github.com/RFD-FHEM/RFFHEM/issues/171
# closed MU;P0=-24396;P1=417;P2=-376;P3=610;P4=-582;D=012121212121212121212121234123434121234341212343434121234123434343412343434121234341212121212341212341234341234123434;CP=1;R=35;
# open MU;P0=-21652;P1=429;P2=-367;P4=634;P5=-555;D=012121212121212121212121245124545121245451212454545121245124545454512454545121245451212121212124512451245451245121212;CP=1;R=38;
{
name => 'FHT80TF',
comment => 'door/window switch',
id => '70',
knownFreqs => '868.35',
one => [1.5,-1.5], # 600
zero => [1,-1], # 400
clockabs => 400,
format => 'twostate', # not used now
clientmodule => 'CUL_FHTTK',
preamble => 'T',
length_min => '50',
length_max => '58',
postDemodulation => \&SIGNALduino_postDemo_FHT80TF,
},
"71" => ## PEARL infactory Poolthermometer (PV-8644)
# MU;P0=1735;P1=-1160;P2=591;P3=-876;D=0123012323010101230101232301230123010101010123012301012323232323232301232323232323232323012301012;CP=2;R=97;
{
name => 'PEARL',
comment => 'infactory Poolthermometer (PV-8644)',
id => '71',
knownFreqs => '433.92',
clockabs => 580,
zero => [3,-2],
one => [1,-1.5],
format => 'twostate',
preamble => 'W71#', # prepend to converted message
clientmodule => 'SD_WS',
#modulematch => '^W71#.*'
length_min => '48',
length_max => '48',
},
"72" => ## Siro blinds MU @Dr. Smag
# ! same definition how ID 16 !
# https://forum.fhem.de/index.php?topic=77167.0
# MU;P0=-760;P1=334;P2=693;P3=-399;P4=-8942;P5=4796;P6=-1540;D=01010102310232310101010102310232323101010102310101010101023102323102323102323102310101010102310232323101010102310101010101023102310231023102456102310232310232310231010101010231023232310101010231010101010102310231023102310245610231023231023231023101010101;CP=1;R=45;O;
# MU;P0=-8848;P1=4804;P2=-1512;P3=336;P4=-757;P5=695;P6=-402;D=0123456345656345656345634343434345634565656343434345634343434343456345634563456345;CP=3;R=49;
{
name => 'Siro shutter',
comment => 'message decode as MU',
id => '72',
knownFreqs => '',
dispatchequals => 'true',
one => [2,-1.2], # 680, -400
zero => [1,-2.2], # 340, -750
start => [14,-4.4], # 4800,-1520
clockabs => 340,
format => 'twostate',
preamble => 'P72#', # prepend to converted message
clientmodule => 'Siro',
#modulematch => '',
length_min => '39',
length_max => '40',
msgOutro => 'SR;P0=-8500;D=0;',
},
"72.1" => ## Siro blinds MS @Dr. Smag
# MS;P0=4803;P1=-1522;P2=333;P3=-769;P4=699;P5=-393;P6=-9190;D=2601234523454523454523452323232323452345454523232323452323232323234523232345454545;CP=2;SP=6;R=61;
{
name => 'Siro shutter',
comment => 'message decode as MS',
id => '72',
knownFreqs => '',
developId => 'm',
dispatchequals => 'true',
one => [2,-1.2], # 680, -400
zero => [1,-2.2], # 340, -750
sync => [14,-4.4], # 4800,-1520
clockabs => 340,
format => 'twostate',
preamble => 'P72#', # prepend to converted message
clientmodule => 'Siro',
#modulematch => '',
length_min => '39',
length_max => '40',
#msgOutro => 'SR;P0=-8500;D=0;',
},
"73" => ## FHT80 - Raumthermostat (868Mhz), @HomeAutoUser
# MU;P0=136;P1=-112;P2=631;P3=-392;P4=402;P5=-592;P6=-8952;D=0123434343434343434343434325434343254325252543432543434343434325434343434343434343254325252543254325434343434343434343434343252525432543464343434343434343434343432543434325432525254343254343434343432543434343434343434325432525254325432543434343434343434;CP=4;R=250;
{
name => 'FHT80',
comment => 'roomthermostat (only receive)',
id => '73',
knownFreqs => '868.35',
developId => 'y',
one => [1.5,-1.5], # 600
zero => [1,-1], # 400
pause => [-25],
clockabs => 400,
format => 'twostate', # not used now
clientmodule => 'FHT',
preamble => '810c04xx0909a001',
length_min => '59',
length_max => '67',
postDemodulation => \&SIGNALduino_postDemo_FHT80,
},
"74" => ## FS20 - 'Remote Control (868Mhz), @HomeAutoUser
# MU;P0=-10420;P1=-92;P2=398;P3=-417;P5=596;P6=-592;D=1232323232323232323232323562323235656232323232356232356232623232323232323232323232323235623232323562356565623565623562023232323232323232323232356232323565623232323235623235623232323232323232323232323232323562323232356235656562356562356202323232323232323;CP=2;R=72;
{
name => 'FS20',
comment => 'remote control',
id => '74',
knownFreqs => '868.35',
one => [1.5,-1.5], # 600
zero => [1,-1], # 400
pause => [-25],
clockabs => 400,
format => 'twostate', # not used now
clientmodule => 'FS20',
preamble => '810b04f70101a001',
length_min => '50',
length_max => '67',
postDemodulation => \&SIGNALduino_postDemo_FS20,
},
"75" => ## Conrad RSL (Erweiterung v2) @litronics https://github.com/RFD-FHEM/SIGNALDuino/issues/69
# ! same definition how ID 5, but other length !
# !! protocol needed revision - start or sync failed !! https://github.com/RFD-FHEM/SIGNALDuino/issues/69#issuecomment-440349328
# MU;P0=-1365;P1=477;P2=1145;P3=-734;P4=-6332;D=01023202310102323102423102323102323101023232323101010232323231023102323102310102323102423102323102323101023232323101010232323231023102323102310102323102;CP=1;R=12;
{
name => 'Conrad RSL v2',
comment => 'remotes and switches',
id => '75',
knownFreqs => '',
one => [3,-1],
zero => [1,-3],
clockabs => 500,
format => 'twostate',
developId => 'y',
clientmodule => 'SD_RSL',
preamble => 'P1#',
modulematch => '^P1#[A-Fa-f0-9]{8}',
length_min => '32',
length_max => '40',
},
"76" => ## Kabellose LED-Weihnachtskerzen XM21-0
# MU;P0=-205;P1=113;P3=406;D=010101010101010101010101010101010101010101010101010101010101030303030101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010103030303010101010101010101010100;CP=1;R=69;
# MU;P0=-198;P1=115;P4=424;D=0101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010404040401010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101040404040;CP=1;R=60;O;
# MU;P0=114;P1=-197;P2=419;D=0121212121010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101012121212101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010;CP=0;R=54;O;
# ON -> P76#FFFFFFFFFFFFFFFF
# MU;P0=-189;P1=115;P4=422;D=0101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101040404040101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010104040404010101010;CP=1;R=73;O;
# MU;P0=-203;P1=412;P2=114;D=01010101020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020101010102020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020202020200;CP=2;R=74;
# MU;P0=-210;P1=106;P3=413;D=0101010101010101010303030301010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101010101030303030100;CP=1;R=80;
# OFF -> P76#FFFFFFFFFFFFFFC
{
name => 'LED XM21',
comment => 'remote with 2-buttons for LED X-MAS light string',
id => '76',
knownFreqs => '433.92',
one => [1.2,-2], # 120,-200
zero => [], # existiert nicht
start => [4.5,-2,4.5,-2,4.5,-2,4.5,-2], # 450,-200 Starsequenz
clockabs => 100,
format => 'twostate', # not used now
clientmodule => 'SD_UT',
preamble => 'P76#',
length_min => 58,
length_max => 64,
},
"77" => ## https://github.com/juergs/NANO_DS1820_4Fach
# MU;P0=102;P1=236;P2=-2192;P3=971;P6=-21542;D=01230303030103010303030303010103010303010303010101030301030103030303010101030301030303010163030303010301030303030301010301030301030301010103030103010303030301010103030103030301016303030301030103030303030101030103030103030101010303010301030303030101010303;CP=0;O;
# MU;P0=-1483;P1=239;P2=970;P3=-21544;D=01020202010132020202010201020202020201010201020201020201010102020102010202020201010102020102020201013202020201020102020202020101020102020102020101010202010201020202020101010202010202020101;CP=1;
# MU;P0=-168;P1=420;P2=-416;P3=968;P4=-1491;P5=242;P6=-21536;D=01234343434543454343434343454543454345434543454345434343434343434343454345434343434345454363434343454345434343434345454345434543454345434543434343434343434345434543434343434545436343434345434543434343434545434543454345434543454343434343434343434543454343;CP=3;O;
# MU;P0=-1483;P1=969;P2=236;P3=-21542;D=01010102020131010101020102010101010102020102010201020102010201010101010101010102010201010101010202013101010102010201010101010202010201020102010201020101010101010101010201020101010101020201;CP=1;
# MU;P0=-32001;P1=112;P2=-8408;P3=968;P4=-1490;P5=239;P6=-21542;D=01234343434543454343434343454543454345454343454345434343434343434343454345434343434345454563434343454345434343434345454345434545434345434543434343434343434345434543434343434545456343434345434543434343434545434543454543434543454343434343434343434543454343;CP=3;O;
# MU;P0=-1483;P1=968;P2=240;P3=-21542;D=01010102020231010101020102010101010102020102010202010102010201010101010101010102010201010101010202023101010102010201010101010202010201020201010201020101010101010101010201020101010101020202;CP=1;
# MU;P0=-32001;P1=969;P2=-1483;P3=237;P4=-21542;D=01212121232123212121212123232123232121232123212321212121212121212123212321212121232123214121212123212321212121212323212323212123212321232121212121212121212321232121212123212321412121212321232121212121232321232321212321232123212121212121212121232123212121;CP=1;O;
# MU;P0=-1485;P1=967;P2=236;P3=-21536;D=010201020131010101020102010101010102020102020101020102010201010101010101010102010201010101020102013101010102010201010101010202010202010102010201020101010101010101010201020101010102010201;CP=1;
{
name => 'NANO_DS1820_4Fach',
comment => 'self build sensor',
id => '77',
knownFreqs => '',
developId => 'y',
zero => [4,-6],
one => [1,-6],
clockabs => 250,
format => 'pwm', #
preamble => 'TX', # prepend to converted message
clientmodule => 'CUL_TX',
modulematch => '^TX......',
length_min => '43',
length_max => '44',
remove_zero => 1, # Removes leading zeros from output
},
"78" => ## geiger blind motors
# MU;P0=313;P1=1212;P2=-309;P4=-2024;P5=-16091;P6=2014;D=01204040562620404626204040404040462046204040562620404626204040404040462046204040562620404626204040404040462046204040562620404626204040404040462046204040;CP=0;R=236;)
# https://forum.fhem.de/index.php/topic,39153.0.html
{
name => 'geiger',
comment => 'geiger blind motors',
id => '78',
knownFreqs => '',
developId => 'y',
zero => [1,-6.6],
one => [6.6,-1],
start => [-53],
clockabs => 300,
format => 'twostate',
preamble => 'u78#', # prepend to converted message
clientmodule => 'SIGNALduino_un',
#modulematch => '^TX......',
length_min => '14',
length_max => '18',
paddingbits => '2' # pad 1 bit, default is 4
},
"79" => ## Heidemann | Heidemann HX | VTX-BELL
# https://github.com/RFD-FHEM/SIGNALDuino/issues/84
# MU;P0=656;P1=-656;P2=335;P3=-326;P4=-5024;D=0123012123012303030301 24 230123012123012303030301 24 230123012123012303030301 24 2301230121230123030303012423012301212301230303030124230123012123012303030301242301230121230123030303012423012301212301230303030124230123012123012303030301242301230121230123030303;CP=2;O;
# https://forum.fhem.de/index.php/topic,64251.0.html
# MU;P0=540;P1=-421;P2=-703;P3=268;P4=-4948;D=4 323102323101010101010232 34 323102323101010101010232 34 323102323101010101010232 34 3231023231010101010102323432310232310101010101023234323102323101010101010232343231023231010101010102323432310232310101010101023234323102323101010101010232343231023231010101010;CP=3;O;
# https://github.com/RFD-FHEM/RFFHEM/issues/252
# MU;P0=-24096;P1=314;P2=-303;P3=615;P4=-603;P5=220;P6=-4672;D=0123456123412341414141412323234 16 123412341414141412323234 16 12341234141414141232323416123412341414141412323234161234123414141414123232341612341234141414141232323416123412341414141412323234161234123414141414123232341612341234141414141232323416123412341414;CP=1;R=26;O;
# MU;P0=-10692;P1=602;P2=-608;P3=311;P4=-305;P5=-4666;D=01234123232323234141412 35 341234123232323234141412 35 341234123232323234141412 35 34123412323232323414141235341234123232323234141412353412341232323232341414123534123412323232323414141235341234123232323234141412353412341232323232341414123534123412323232323414;CP=3;R=47;O;
# MU;P0=-7152;P1=872;P2=-593;P3=323;P4=-296;P5=622;P6=-4650;D=01234523232323234545452 36 345234523232323234545452 36 345234523232323234545452 36 34523452323232323454545236345234523232323234545452363452345232323232345454523634523452323232323454545236345234523232323234545452363452345232323232345454523634523452323232323454;CP=3;R=26;O;
# https://forum.fhem.de/index.php/topic,58397.msg879878.html#msg879878
# MU;P0=-421;P1=344;P2=-699;P4=659;P6=-5203;P7=259;D=1612121040404040404040421216121210404040404040404212161212104040404040404042121612121040404040404040421216121210404040404040404272761212104040404040404042121612121040404040404040421216121210404040404040404212167272104040404040404042721612127040404040404;CP=4;R=0;O;
{
name => 'wireless doorbell',
comment => 'Heidemann | Heidemann HX | VTX-BELL',
id => '79',
knownFreqs => '',
zero => [-2,1],
one => [-1,2],
start => [-15,1],
clockabs => 330,
format => 'twostate', #
preamble => 'P79#', # prepend to converted message
clientmodule => 'SD_BELL',
modulematch => '^P79#.*',
length_min => '12',
length_max => '12',
},
"80" => ## EM1000WZ (Energy-Monitor) Funkprotokoll (868Mhz), @HomeAutoUser | Derwelcherichbin
# https://github.com/RFD-FHEM/RFFHEM/issues/253
# MU;P1=-417;P2=385;P3=-815;P4=-12058;D=42121212121212121212121212121212121232321212121212121232321212121212121232323212323212321232121212321212123232121212321212121232323212121212121232121212121212121232323212121212123232321232121212121232123232323212321;CP=2;R=87;
{
name => 'EM1000WZ',
comment => 'EM (Energy-Monitor)',
id => '80',
knownFreqs => '868.35',
one => [1,-2], # 800
zero => [1,-1], # 400
clockabs => 400,
format => 'twostate', # not used now
clientmodule => 'CUL_EM',
preamble => 'E',
length_min => '104',
length_max => '114',
postDemodulation => \&SIGNALduino_postDemo_EM,
},
"81" => ## Remote control SA-434-1 based on HT12E @ elektron-bbs
# MU;P0=-485;P1=188;P2=-6784;P3=508;P5=1010;P6=-974;P7=-17172;D=0123050505630505056305630563730505056305050563056305637305050563050505630563056373050505630505056305630563730505056305050563056305637305050563050505630563056373050505630505056305630563730505056305050563056305637305050563050505630563056373050505630505056;CP=3;R=0;
# MU;P0=-1756;P1=112;P2=-11752;P3=496;P4=-495;P5=998;P6=-988;P7=-17183;D=0123454545634545456345634563734545456345454563456345637345454563454545634563456373454545634545456345634563734545456345454563456345637345454563454545634563456373454545634545456345634563734545456345454563456345637345454563454545634563456373454545634545456;CP=3;R=0;
# __ ____
# ____| | __| |
# Bit 1 Bit 0
# short 500 microSec / long 1000 microSec / bittime 1500 mikroSek / pilot 12 * bittime, from that 1/3 bitlength high
{
name => 'SA-434-1',
comment => 'remote control SA-434-1 mini 923301 based on HT12E',
id => '81',
knownFreqs => '433.92',
one => [-2,1], # i.O.
zero => [-1,2], # i.O.
start => [-35,1], # Message is not provided as MS, worakround is start
clockabs => 500,
format => 'twostate',
preamble => 'P81#', # prepend to converted message
modulematch => '^P81#.{3}',
clientmodule => 'SD_UT',
length_min => '12',
length_max => '12',
},
"82" => ## Fernotron shutters and light switches
# https://github.com/RFD-FHEM/RFFHEM/issues/257
# MU;P0=-32001;P1=435;P2=-379;P4=-3201;P5=831;P6=-778;D=01212121212121214525252525252521652161452525252525252161652141652521652521652521614165252165252165216521416521616165216525216141652161616521652165214165252161616521652161416525216161652161652141616525252165252521614161652525216525216521452165252525252525;CP=1;O;
# the messages received are usual missing 12 bits at the end for some reason. So the checksum byte is missing.
# Fernotron protocol is unidirectional. Here we can only receive messages from controllers send to receivers.
{
name => 'Fernotron',
comment => 'shutters and light switches',
id => '82', # protocol number
knownFreqs => '',
developId => 'm',
dispatchBin => '1',
paddingbits => '1', # disable padding
one => [1,-2], # on=400us, off=800us
zero => [2,-1], # on=800us, off=400us
float => [1,-8], # on=400us, off=3200us. the preamble and each 10bit word has one [1,-8] in front
pause => [1,-1], # preamble (5x)
clockabs => 400, # 400us
format => 'twostate',
preamble => 'P82#', # prepend our protocol number to converted message
clientmodule => 'Fernotron',
length_min => '100', # actual 120 bit (12 x 10bit words to decode 6 bytes data), but last 20 are for checksum
length_max => '3360', # 3360 bit (336 x 10bit words to decode 168 bytes data) for full timer message
},
"83" => ## Remote control RH787T based on MOSDESIGN SEMICONDUCTOR CORP (CMOS ASIC encoder) M1EN compatible HT12E
# for example Westinghouse Deckenventilator Delancey, 6 speed buttons, @zwiebelxxl
# https://github.com/RFD-FHEM/RFFHEM/issues/250
# Taste 1 MU;P0=388;P1=-112;P2=267;P3=-378;P5=585;P6=-693;P7=-11234;D=0123035353535356262623562626272353535353562626235626262723535353535626262356262627235353535356262623562626272353535353562626235626262723535353535626262356262627235353535356262623562626272353535353562626235626262723535353535626262356262627235353535356262;CP=2;R=43;O;
# Taste 2 MU;P0=-176;P1=262;P2=-11240;P3=112;P5=-367;P6=591;P7=-695;D=0123215656565656717171567156712156565656567171715671567121565656565671717156715671215656565656717171567156712156565656567171715671567121565656565671717156715671215656565656717171567156712156565656567171715671567121565656565671717171717171215656565656717;CP=1;R=19;O;
# Taste 3 MU;P0=564;P1=-392;P2=-713;P3=245;P4=-11247;D=0101010101023231023232323431010101010232310232323234310101010102323102323232343101010101023231023232323431010101010232310232323234310101010102323102323232343101010101023231023232323431010101010232310232323234310101010102323102323232343101010101023231023;CP=3;R=40;O;
{
name => 'RH787T',
comment => 'remote control for example Westinghouse Delancey 7800140',
id => '83',
knownFreqs => '',
one => [-2,1],
zero => [-1,2],
start => [-35,1], # calculated 12126,31579 µS
clockabs => 335, # calculated ca 336,8421053 µS short - 673,6842105µS long
format => 'twostate', # there is a pause puls between words
preamble => 'P83#', # prepend to converted message
clientmodule => 'SD_UT',
modulematch => '^P83#.{3}',
length_min => '12',
length_max => '12',
},
"84" => ## Funk Wetterstation Auriol IAN 283582 Version 06/2017 (Lidl), Modell-Nr.: HG02832D, 09/2018@roobbb
# https://github.com/RFD-FHEM/RFFHEM/issues/263
# MU;P0=-28796;P1=376;P2=-875;P3=834;P4=220;P5=-632;P6=592;P7=-268;D=0123232324545454545456767454567674567456745674545454545456767676767674567674567676767456;CP=4;R=22;
# MU;P0=-28784;P1=340;P2=-903;P3=814;P4=223;P5=-632;P6=604;P7=-248;D=0123232324545454545456767456745456767674545674567454545456745454545456767454545456745676;CP=4;R=22;
# MU;P0=-21520;P1=235;P2=-855;P3=846;P4=620;P5=-236;P7=-614;D=012323232454545454545451717451717171745171717171717171717174517171745174517174517174545;CP=1;R=217;
## Sempre 92596/65395, Hofer/Aldi, WS97210-1, WS97230-1, WS97210-2, WS97230-2
# https://github.com/RFD-FHEM/RFFHEM/issues/223
# MU;P0=11916;P1=-852;P2=856;P3=610;P4=-240;P5=237;P6=-610;D=01212134563456563434565634565634343456565634565656565634345634565656563434563456343430;CP=5;R=254;
# MU;P0=-30004;P1=815;P2=-910;P3=599;P4=-263;P5=234;P6=-621;D=0121212345634565634345656345656343456345656345656565656343456345634563456343434565656;CP=5;R=5;
{
name => 'IAN 283582',
comment => 'Weatherstation Auriol IAN 283582 / Sempre 92596/65395',
id => '84',
knownFreqs => '',
one => [3,-1],
zero => [1,-3],
start => [4,-4,4,-4,4,-4],
clockabs => 215,
format => 'twostate',
preamble => 'W84#', # prepend to converted message
postamble => '', # append to converted message
clientmodule => 'SD_WS',
length_min => '39', # das letzte Bit fehlt meistens
length_max => '40',
},
"85" => ## Funk Wetterstation TFA 35.1140.01 mit Temperatur-/Feuchte- und Windsensor TFA 30.3222.02 09/2018@Iron-R
# https://github.com/RFD-FHEM/RFFHEM/issues/266
# MU;P0=-509;P1=474;P2=-260;P3=228;P4=718;P5=-745;D=01212303030303012301230123012301230301212121230454545453030303012123030301230303012301212123030301212303030303030303012303012303012303012301212303030303012301230123012301230301212121212454545453030303012123030301230303012301212123030301212303030303030303;CP=3;R=46;O;
# MU;P0=-504;P1=481;P2=-254;P3=227;P4=723;P5=-739;P6=-1848;D=01230121212303030121230303030303030453030303012123030301230303012301212303030303030304530303030121230303012303030123012121230303012123030303030303030123030123030123030123012123030303030123012301230123012303012121212364545454530303030121230303012303030123;CP=3;R=45;O;
# MU;P0=7944;P1=-724;P2=742;P3=241;P4=-495;P5=483;P6=-248;D=01212121343434345656343434563434345634565656343434565634343434343434345634345634345634343434343434343434345634565634345656345634343456563421212121343434345656343434563434345634565656343434565634343434343434345634345634345634343434343434343434345634565634;CP=3;R=47;O;<3B>
{
name => 'TFA 30.3222.02',
comment => 'Combisensor for Weatherstation TFA 35.1140.01',
id => '85',
knownFreqs => '',
one => [2,-1],
zero => [1,-2],
start => [3,-3,3,-3,3,-3],
clockabs => 250,
format => 'twostate',
preamble => 'W85#', # prepend to converted message
postamble => '', # append to converted message
clientmodule => 'SD_WS',
length_min => '64',
length_max => '68',
},
"86" => ### for remote controls: Novy 840029, CAME TOP 432EV, OSCH & Neff Transmitter SF01 01319004
### CAME TOP 432EV 433,92 MHz für z.B. Drehtor Antrieb:
# https://forum.fhem.de/index.php/topic,63370.msg849400.html#msg849400
# https://github.com/RFD-FHEM/RFFHEM/issues/151
# MU;P0=711;P1=-15288;P4=132;P5=-712;P6=316;P7=-313;D=4565656705656567056567056 16 565656705656567056567056 16 56565670565656705656705616565656705656567056567056165656567056565670565670561656565670565656705656705616565656705656567056567056165656567056565670565670561656565670565656705656705616565656705656567056;CP=6;R=52;
# MU;P0=-322;P1=136;P2=-15241;P3=288;P4=-735;P6=723;D=012343434306434343064343430623434343064343430643434306 2343434306434343064343430 623434343064343430643434306234343430643434306434343062343434306434343064343430623434343064343430643434306234343430643434306434343062343434306434343064343430;CP=3;R=27;
# MU;P0=-15281;P1=293;P2=-745;P3=-319;P4=703;P5=212;P6=152;P7=-428;D=0 1212121342121213421213421 01 212121342121213421213421 01 21212134212121342121342101212121342121213421213421012121213421212134212134210121243134212121342121342101252526742121213425213421012121213421212134212134210121212134212;CP=1;R=23;
# rechteTaste: 0x112 (000100010010), linkeTaste: 0x111 (000100010001), the least significant bits distinguish the keys
### remote control Novy 840029 for Novy Pureline 6830 kitchen hood:
# https://github.com/RFD-FHEM/RFFHEM/issues/331
# light on/off button # MU;P0=710;P1=353;P2=-403;P4=-761;P6=-16071;D=20204161204120412041204120414141204120202041612041204120412041204141412041202020416120412041204120412041414120412020204161204120412041204120414141204120202041;CP=1;R=40;
# plus button # MU;P0=22808;P1=-24232;P2=701;P3=-765;P4=357;P5=-15970;P7=-406;D=012345472347234723472347234723454723472347234723472347234547234723472347234723472345472347234723472347234723454723472347234723472347234;CP=4;R=39;
# minus button # MU;P0=-8032;P1=364;P2=-398;P3=700;P4=-760;P5=-15980;D=0123412341234123412341412351234123412341234123414123512341234123412341234141235123412341234123412341412351234123412341234123414123;CP=1;R=40;
# power button # MU;P0=-756;P1=718;P2=354;P3=-395;P4=-16056;D=01020202310231310202 42 310231023102310231020202310231310202 42 31023102310231023102020231023131020242310231023102310231020202310231310202;CP=2;R=41;
# novy button # MU;P0=706;P1=-763;P2=370;P3=-405;P4=-15980;D=0123012301230304230123012301230123012303042;CP=2;R=42;
### Neff Transmitter SF01 01319004 (SF01_01319004) 433,92 MHz
# https://github.com/RFD-FHEM/RFFHEM/issues/376
# MU;P0=-707;P1=332;P2=-376;P3=670;P5=-15243;D=01012301232323230123012301232301010123510123012323232301230123012323010101235101230123232323012301230123230101012351012301232323230123012301232301010123510123012323232301230123012323010101235101230123232323012301230123230101012351012301232323230123012301;CP=1;R=3;O;
# MU;P0=-32001;P1=348;P2=-704;P3=-374;P4=664;P5=-15255;D=01213421343434342134213421343421213434512134213434343421342134213434212134345121342134343434213421342134342121343451213421343434342134213421343421213434512134213434343421342134213434212134345121342134343434213421342134342121343451213421343434342134213421;CP=1;R=15;O;
# MU;P0=-32001;P1=326;P2=-721;P3=-385;P4=656;P5=-15267;D=01213421343434342134213421343421342134512134213434343421342134213434213421345121342134343434213421342134342134213451213421343434342134213421343421342134512134213434343421342134213434213421345121342134343434213421342134342134213451213421343434342134213421;CP=1;R=10;O;
# MU;P0=-372;P1=330;P2=684;P3=-699;P4=-14178;D=010231020202023102310231020231310231413102310202020231023102310202313102314;CP=1;R=253;
# MU;P0=-710;P1=329;P2=-388;P3=661;P4=-14766;D=01232301410123012323232301230123012323012323014;CP=1;R=1;
### BOSCH Transmitter SF01 01319004 (SF01_01319004_Typ2) 433,92 MHz
# MU;P0=706;P1=-160;P2=140;P3=-335;P4=-664;P5=385;P6=-15226;P7=248;D=01210103045303045453030304545453030454530653030453030454530303045454530304747306530304530304545303030454545303045453065303045303045453030304545453030454530653030453030454530303045454530304545306530304530304545303030454545303045453065303045303045453030304;CP=5;O;
# MU;P0=-15222;P1=379;P2=-329;P3=712;P6=-661;D=30123236123236161232323616161232361232301232361232361612323236161612323612323012323612323616123232361616123236123230123236123236161232323616161232361232301232361232361612323236161612323612323012323612323616123232361616123236123230123236123236161232323616;CP=1;O;
# MU;P0=705;P1=-140;P2=-336;P3=-667;P4=377;P5=-15230;P6=248;D=01020342020343420202034343420202020345420203420203434202020343434202020203654202034202034342020203434342020202034542020342020343420202034343420202020345420203420203434202020343434202020203454202034202034342020203434342020202034542020342020343420202034343;CP=4;O;
# MU;P0=704;P1=-338;P2=-670;P3=378;P4=-15227;P5=244;D=01023231010102323231010102310431010231010232310101023232310101025104310102310102323101010232323101010231043101023101023231010102323231010102310431010231010232310101023232310101023104310102310102323101010232323101010231043101023101023231010102323231010102;CP=3;O;
# MU;P0=-334;P1=709;P2=-152;P3=-663;P4=379;P5=-15226;P6=250;D=01210134010134340101013434340101340134540101340101343401010134343401013601365401013401013434010101343434010134013454010134010134340101013434340101340134540101340101343401010134343401013401345401013401013434010101343434010134013454010134010134340101013434;CP=4;O;
{
name => 'BOSCH | CAME | Novy | Neff',
comment => 'remote control CAME TOP 432EV, Novy 840029, BOSCH or Neff SF01 01319004',
id => '86',
knownFreqs => '',
one => [-2,1],
zero => [-1,2],
start => [-44,1],
clockabs => 350,
format => 'twostate',
preamble => 'P86#', # prepend to converted message
clientmodule => 'SD_UT',
#modulematch => '^P86#.*',
length_min => '12',
length_max => '18',
},
"87" => ## JAROLIFT Funkwandsender TDRC 16W / TDRCT 04W
# https://github.com/RFD-FHEM/RFFHEM/issues/380
# MS;P1=1524;P2=-413;P3=388;P4=-3970;P5=-815;P6=778;P7=-16024;D=34353535623562626262626235626262353562623535623562626235356235626262623562626262626262626262626262623535626235623535353535626262356262626262626267123232323232323232323232;CP=3;SP=4;R=226;O;m2;
# MS;P0=-15967;P1=1530;P2=-450;P3=368;P4=-3977;P5=-835;P6=754;D=34353562623535623562623562356262626235353562623562623562626235353562623562626262626262626262626262623535626235623535353535626262356262626262626260123232323232323232323232;CP=3;SP=4;R=229;O;
{
name => 'JAROLIFT',
comment => 'remote control JAROLIFT TDRC_16W / TDRCT_04W',
id => '87',
knownFreqs => '433.92',
one => [1,-2],
zero => [2,-1],
preSync => [3.8,-1, 1,-1, 1,-1, 1,-1, 1,-1, 1,-1, 1,-1, 1,-1, 1,-1, 1,-1, 1,-1, 1,-1, 1,-1],
sync => [1,-10], # this is a end marker, but we use this as a start marker
pause => [-40],
clockabs => 400, # ca 400us
developId => 'y',
format => 'twostate',
preamble => 'u87#', # prepend to converted message
#clientmodule => '',
#modulematch => '',
length_min => '72', # 72
length_max => '85', # 85
},
"88" => ## Roto Dachfensterrolladen | Aurel Fernbedienung "TX-nM-HCS" (HCS301 Chip) | three buttons -> up, Stop, down
# https://forum.fhem.de/index.php/topic,91244.0.html
# MS;P1=361;P2=-435;P4=-4018;P5=-829;P6=759;P7=-16210;D=141562156215156262626215151562626215626215621562151515621562151515156262156262626215151562156215621515151515151562151515156262156215171212121212121212121212;CP=1;SP=4;R=66;O;m0;
# MS;P0=-16052;P1=363;P2=-437;P3=-4001;P4=-829;P5=755;D=131452521452145252521452145252521414141452521452145214141414525252145252145252525214141452145214521414141414141452141414145252145252101212121212121212121212;CP=1;SP=3;R=51;O;m1;
{
name => 'Roto shutter',
comment => 'remote control Aurel TX-nM-HCS',
id => '88',
knownFreqs => '',
one => [1,-2],
zero => [2,-1],
sync => [1,-10], # this is a end marker, but we use this as a start marker
clockabs => 400, # ca 400us
developId => 'y',
format => 'twostate',
preamble => 'u88#', # prepend to converted message
#clientmodule => '',
#modulematch => '',
length_min => '65',
length_max => '78',
},
"89" => ## Funk Wetterstation TFA 35.1140.01 mit Temperatur-/Feuchtesensor TFA 30.3221.02 12/2018@Iron-R
# https://github.com/RFD-FHEM/RFFHEM/issues/266
# MU;P0=-900;P1=390;P2=-499;P3=-288;P4=193;P7=772;D=1213424213131342134242424213134242137070707013424213134242131342134242421342424213421342131342421313134213424242421313424213707070701342421313424213134213424242134242421342134213134242131313421342424242131342421;CP=4;R=43;
# MU;P0=-491;P1=382;P2=-270;P3=179;P4=112;P5=778;P6=-878;D=01212304012123012303030123030301230123012303030121212301230301230121212121256565656123030121230301212301230303012303030123012301230303012121230123030123012121212125656565612303012123030121230123030301230303012301230123030301212123012303012301212121212565;CP=3;R=43;O;
# MU;P0=-299;P1=384;P2=169;P3=-513;P5=761;P6=-915;D=01023232310101010101023565656561023231010232310102310232323102323231023231010232323101010102323231010101010102356565656102323101023231010231023232310232323102323101023232310101010232323101010101010235656565610232310102323101023102323231023232310232310102;CP=2;R=43;O;
# MU;P0=-32001;P1=412;P2=-289;P3=173;P4=-529;P5=777;P6=-899;D=01234345656541212341234123434121212121234123412343412343456565656121212123434343434343412343412343434121234123412343412121212123412341234341234345656565612121212343434343434341234341234343412123412341234341212121212341234123434123434565656561212121234343;CP=3;R=22;O;
# MU;P0=22960;P1=-893;P2=775;P3=409;P4=-296;P5=182;P6=-513;D=01212121343434345656565656565634565634565656343456563434565634343434345656565656565656342121212134343434565656565656563456563456565634345656343456563434343434565656565656565634212121213434343456565656565656345656345656563434565634345656343434343456565656;CP=5;R=22;O;
# MU;P0=172;P1=-533;P2=401;P3=-296;P5=773;P6=-895;D=01230101230101012323010101230123010101010101230101230101012323010101230123010301230101010101012301012301010123230101012301230101010123010101010101012301565656562323232301010101010101230101230101012323010101230123010101012301010101010101230156565656232323;CP=0;R=23;O;
{
name => 'TFA 30.3221.02',
comment => 'temperature / humidity sensor for weatherstation TFA 35.1140.01',
id => '89',
knownFreqs => '433.92',
one => [2,-1],
zero => [1,-2],
start => [3,-3,3,-3,3,-3],
clockabs => 250,
format => 'twostate',
preamble => 'W89#',
postamble => '',
clientmodule => 'SD_WS',
length_min => '40',
length_max => '40',
},
"90" => ## mumbi m-FS300 / manax MX-RCS250 (CP 258-298)
# https://forum.fhem.de/index.php/topic,94327.15.html
# MS;P0=-9964;P1=273;P4=-866;P5=792;P6=-343;D=10145614141414565656561414561456561414141456565656561456141414145614;CP=1;SP=0;R=35;O;m2; //A AN
# MS;P0=300;P1=-330;P2=-10160;P3=804;P7=-840;D=02073107070707313131310707310731310707070731313107310731070707070707;CP=0;SP=2;R=23;O;m1; //A AUS
# MS;P1=260;P2=-873;P3=788;P4=-351;P6=-10157;D=16123412121212343434341212341234341212121234341234341234121212341212;CP=1;SP=6;R=21;O;m2; //B AN
# MS;P1=268;P3=793;P4=-337;P6=-871;P7=-10159;D=17163416161616343434341616341634341616161634341616341634161616343416;CP=1;SP=7;R=24;O;m2; //B AUS
{
name => 'mumbi | MANAX',
comment => 'remote control mumbi FS300, MANAX MX-RCS250 (only receive)',
id => '90',
knownFreqs => '433.92',
one => [3,-1],
zero => [1,-3],
sync => [1,-36],
clockabs => 280, # -1=auto
format => 'twostate',
preamble => 'P90#',
length_min => '33',
length_max => '36',
clientmodule => 'SD_UT',
modulematch => '^P90#.*',
},
"91" => ## Atlantic Security / Focus Security China Devices
# https://forum.fhem.de/index.php/topic,58397.msg876862.html#msg876862
# MU;P0=800;P1=-813;P2=394;P3=-410;P4=-3992;D=0123030303030303012121230301212304230301212301230301212123012301212303012301230303030303030121212303012123042303012123012303012121230123012123030123012303030303030301212123030121230;CP=2;R=46;
# MU;P0=406;P1=-402;P2=802;P3=-805;P4=-3994;D=012123012301212121212121230303012123030124012123030123012123030301230123030121230123012121212121212303030121230301240121230301230121230303012301230301212301230121212121212123030301212303012;CP=0;R=52;
# MU;P0=14292;P1=-10684;P2=398;P3=-803;P4=-406;P5=806;P6=-4001;D=01232324532453232454532453245454532324545323232453245324562454532324532454532323245324532324545324532454545323245453232324532453245624545323245324545323232453245323245453245324545453232454532323245324532456245453232453245453232324532453232454532453245454;CP=2;R=50;O;
{
name => 'Atlantic security',
comment => 'example sensor MD-210R | MD-2018R | MD-2003R (MU decode)',
id => '91',
knownFreqs => '433.92 | 868.35',
one => [-2,1],
zero => [-1,2],
start => [-10,1],
clockabs => 400,
format => 'twostate', #
preamble => 'P91#', # prepend to converted message
length_min => '36',
length_max => '36',
clientmodule => 'SD_UT',
#modulematch => '^P91#.*',
developID => 'y',
},
"91.1" => ## Atlantic Security / Focus Security China Devices
# https://forum.fhem.de/index.php/topic,58397.msg878008.html#msg878008
# MS;P0=-399;P1=407;P2=820;P3=-816;P4=-4017;D=14131020231020202313131023131313131023102023131313131310202313131020202313;CP=1;SP=4;O;m0;
# MS;P1=392;P2=-824;P3=-416;P4=804;P5=-4034;D=15121343421343434212121342121212121342134342121212121213434212121343434212;CP=1;SP=5;e;m2;
{
name => 'Atlantic security',
comment => 'example sensor MD-210R | MD-2018R | MD-2003R (MS decode)',
id => '91.1',
knownFreqs => '433.92 | 868.35',
one => [-2,1],
zero => [-1,2],
sync => [-10,1],
clockabs => 400,
format => 'twostate', #
preamble => 'P91.1#', # prepend to converted message
length_min => '32',
length_max => '36',
clientmodule => 'SD_UT',
#modulematch => '^P91.1#.*',
developID => 'y',
},
"92" => ## KRINNER Lumix - LED X-MAS
# https://github.com/RFD-FHEM/RFFHEM/issues/452 | https://forum.fhem.de/index.php/topic,94873.msg876477.html?PHPSESSID=khp4ja64pcqa5gsf6gb63l1es5#msg876477
# MU;P0=24188;P1=-16308;P2=993;P3=-402;P4=416;P5=-967;P6=-10162;D=0123234545454523234523234545454545454545232623452345454545454523234523234545454523234523234545454545454545232623452345454545454523234523234545454523234523234545454545454545232623452345454545454523234523234545454523234523234545454545454545232;CP=4;R=25;
# MU;P0=11076;P1=-20524;P2=281;P3=-980;P4=982;P5=-411;P6=408;P7=-10156;D=0123232345456345456363636363636363634745634563636363636345456345456363636345456345456363636363636363634745634563636363636345456345456363636345456345456363636363636363634745634563636363636345456345456363636345456345456363636363636363634;CP=6;R=38;
{
name => 'KRINNER Lumix',
comment => 'remote control LED X-MAS',
id => '92',
knownFreqs => '433.92',
zero => [1,-2],
one => [2,-1],
start => [2,-24],
clockabs => 420,
format => 'twostate', #
preamble => 'P92#', # prepend to converted message
length_min => '32',
length_max => '32',
clientmodule => 'SD_UT',
#modulematch => '^P92#.*',
},
"93" => ## ESTO Lighting GmbH | remote control KL-RF01 with 9 buttons (CP 375-395)
# https://github.com/RFD-FHEM/RFFHEM/issues/449
# MS;P1=376;P4=-1200;P5=1170;P6=-409;P7=-12224;D=17141414561456561456565656145656141414145614141414565656145656565614;CP=1;SP=7;R=231;e;m0;
# MS;P1=393;P2=-1174;P4=1180;P5=-401;P6=-12222;D=16121212451245451245454545124545124545451212121212121212454545454512;CP=1;SP=6;R=243;e;m0;
# MS;P0=397;P1=-385;P2=-1178;P3=1191;P4=-12230;D=04020202310231310231313131023131023131020202020202020231313131313102;CP=0;SP=4;R=250;e;m0;
{
name => 'ESTO Lighting GmbH',
comment => 'remote control KL-RF01',
id => '93',
knownFreqs => '433.92',
one => [3,-1],
zero => [1,-3],
sync => [1,-32],
clockabs => 385, # -1=auto
format => 'twostate',
preamble => 'u93#',
length_min => '32', # 2. MSG: 32 Bit, bleibt so
length_max => '36', # 1. MSG: 33 Bit, wird verlängert auf 36 Bit
#clientmodule => 'SD_UT',
#modulematch => '^P93#.*',
developId => 'y',
},
);
Reference in New Issue View Git Blame Copy Permalink