fhem-mirror/fhem/FHEM/73_PRESENCE.pm

# $Id$
##############################################################################
#
#     73_PRESENCE.pm
#     Checks for the presence of a mobile phone or tablet by network ping or bluetooth detection.
#     It reports the presence of this device as state.
#
#     Copyright by Markus Bloch
#     e-mail: Notausstieg0309@googlemail.com
#
#     This file is part of fhem.
#
#     Fhem is free software: you can redistribute it and/or modify
#     it under the terms of the GNU General Public License as published by
#     the Free Software Foundation, either version 2 of the License, or
#     (at your option) any later version.
#
#     Fhem is distributed in the hope that it will be useful,
#     but WITHOUT ANY WARRANTY; without even the implied warranty of
#     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#     GNU General Public License for more details.
#
#     You should have received a copy of the GNU General Public License
#     along with fhem.  If not, see <http://www.gnu.org/licenses/>.
#
##############################################################################

package main;

use strict;
use warnings;
use Blocking;
use Time::HiRes qw(gettimeofday usleep sleep);
use DevIo;





sub
PRESENCE_Initialize($)
{
    my ($hash) = @_;

    # Provider
    $hash->{ReadFn}  = "PRESENCE_Read";  
    $hash->{ReadyFn} = "PRESENCE_Ready";
    $hash->{SetFn}   = "PRESENCE_Set";
    $hash->{DefFn}   = "PRESENCE_Define";
    $hash->{UndefFn} = "PRESENCE_Undef";
    $hash->{AttrFn}  = "PRESENCE_Attr";
    $hash->{AttrList}= "do_not_notify:0,1 disable:0,1 fritzbox_speed:0,1 ping_count:1,2,3,4,5,6,7,8,9,10 powerCmd ".$readingFnAttributes;

}

#####################################
sub
PRESENCE_Define($$)
{
    my ($hash, $def) = @_;
    my @a = split("[ \t]+", $def);
    my $dev;
    my $username =  getlogin || getpwuid($<) || "[unknown]";
    my $name = $hash->{NAME};
    if(defined($a[2]) and defined($a[3]))
    {
        if($a[2] eq "local-bluetooth")
        {
            unless($a[3] =~ /^\s*([0-9a-fA-F]{2}:){5}[0-9a-fA-F]{2}\s*$/)
            {
                my $msg = "given address is not a bluetooth hardware address";
                Log 2, "PRESENCE ($name) - ".$msg;
                return $msg
            }
            
            $hash->{MODE} = "local-bluetooth";
            $hash->{ADDRESS} = $a[3];
            $hash->{TIMEOUT_NORMAL} = (defined($a[4]) ? $a[4] : 30);
            $hash->{TIMEOUT_PRESENT} = (defined($a[5]) ? $a[5] : $hash->{TIMEOUT_NORMAL});
            
        }
        elsif($a[2] eq "fritzbox")
        {
     
            unless(-X "/usr/bin/ctlmgr_ctl")
            {    
                my $msg = "this is not a fritzbox or you running FHEM with the AVM Beta Image. Please use the FHEM FritzBox Image from fhem.de";
                Log 2, "PRESENCE ($name) - ".$msg;
                return $msg;
            }

            unless($username eq "root")
            {
                my $msg = "FHEM is not running under root (currently $username) This check can only performed with root access to the FritzBox";
                Log 2, "PRESENCE ($name) - ".$msg;
                return $msg;
            }
            
            $hash->{MODE} = "fritzbox";
            $hash->{ADDRESS} = $a[3];    
            $hash->{TIMEOUT_NORMAL} = (defined($a[4]) ? $a[4] : 30);
            $hash->{TIMEOUT_PRESENT} = (defined($a[5]) ? $a[5] : $hash->{TIMEOUT_NORMAL});

        }
        elsif($a[2] eq "lan-ping")
        {
            if(-X "/usr/bin/ctlmgr_ctl" and not $username eq "root")
            {
                my $msg = "FHEM is not running under root (currently $username) This check can only performed with root access to the FritzBox";
                Log 2, "PRESENCE ($name) - ".$msg;
                return $msg;
            }

            $hash->{MODE} = "lan-ping";
            $hash->{ADDRESS} = $a[3];
            $hash->{TIMEOUT_NORMAL} = (defined($a[4]) ? $a[4] : 30);
            $hash->{TIMEOUT_PRESENT} = (defined($a[5]) ? $a[5] : $hash->{TIMEOUT_NORMAL});
     
        }
        elsif($a[2] =~ /(shellscript|function)/)
        {
            if($def =~ /(\S+) \w+ (\S+) ["']{0,1}(.+?)['"]{0,1}\s*(\d*)\s*(\d*)$/s)
            {
       
                $hash->{MODE} = $2;
                $hash->{helper}{call} = $3;
                $hash->{TIMEOUT_NORMAL} = ($4 ne "" ? $4 : 30);
                $hash->{TIMEOUT_PRESENT} = ($5 ne "" ? $5 : $hash->{TIMEOUT_NORMAL});

                if($hash->{helper}{call} =~ /\|/)
                {
                    my $msg = "The command contains a pipe ( | ) symbol, which is not allowed.";
                    Log 2, "PRESENCE ($name) - ".$msg;
                    return $msg;
                }

                if($hash->{MODE} eq "function" and not $hash->{helper}{call} =~ /^\{.+\}$/)
                {
                    my $msg = "The function call must be encapsulated by brackets ( {...} ).";
                    Log 2, "PRESENCE ($name) - ".$msg;
                    return $msg;
                }
            }
         
        }
        elsif($a[2] eq "lan-bluetooth")
        {
         
            unless($a[3] =~ /^\s*([0-9a-fA-F]{2}:){5}[0-9a-fA-F]{2}\s*$/)
            {
                my $msg = "given address is not a bluetooth hardware address";
                Log 2, "PRESENCE ($name) - ".$msg;
                return $msg
            }

            DevIo_CloseDev($hash);

            $hash->{MODE} = "lan-bluetooth";
            $hash->{ADDRESS} = $a[3];
            $hash->{TIMEOUT_NORMAL} = (defined($a[5]) ? $a[5] : 30);
            $hash->{TIMEOUT_PRESENT} = (defined($a[6]) ? $a[6] : $hash->{TIMEOUT_NORMAL});

            $dev = $a[4];
            $dev .= ":5222" if($dev !~ m/:/ && $dev ne "none" && $dev !~ m/\@/);

            $hash->{DeviceName} = $dev;

        }
        else
        {
            my $msg = "unknown mode \"".$a[2]."\" in define statement: Please use lan-ping, lan-bluetooth, local-bluetooth, fritzbox, shellscript or function";
            Log 2, "PRESENCE ($name) - ".$msg;
            return $msg
        }
    }
    else
    {
        my $msg = "wrong syntax for define statement: define <name> PRESENCE <mode> <device-address> [ <check-interval> [ <present-check-interval> ] ]";
        Log 2, "PRESENCE ($name) - $msg";
        return $msg;
    }

    my $timeout = $hash->{TIMEOUT_NORMAL};
    my $presence_timeout = $hash->{TIMEOUT_PRESENCE};

    if(defined($timeout) and not $timeout =~ /^\d+$/)
    {
        my $msg = "check-interval must be a number";
        Log 2, "PRESENCE ($name) - ".$msg;
        return $msg;
    }

    if(defined($timeout) and not $timeout > 0)
    {
        my $msg = "check-interval must be greater than zero";
        Log 2, "PRESENCE ($name) -".$msg;
        return $msg;
    }


    if(defined($presence_timeout) and not $presence_timeout =~ /^\d+$/)
    {
        my $msg = "presence-check-interval must be a number";
        Log 2, "PRESENCE ($name) - ".$msg;
        return $msg;
    }


    if(defined($presence_timeout) and not $presence_timeout > 0)
    {
        my $msg = "presence-check-interval must be greater than zero";
        Log 2, "PRESENCE ($name) - ".$msg;
        return $msg;
    }

    delete $hash->{helper}{cachednr} if(defined($hash->{helper}{cachednr}));

    if($hash->{MODE} =~ /(lan-ping|local-bluetooth|fritzbox|shellscript|function)/)
    {
        delete $hash->{helper}{RUNNING_PID} if(defined($hash->{helper}{RUNNING_PID}));
        RemoveInternalTimer($hash);
        InternalTimer(gettimeofday(), "PRESENCE_StartLocalScan", $hash, 0) unless($hash->{helper}{DISABLED});
     
        return;
    }
    elsif($hash->{MODE} eq "lan-bluetooth")
    {
        return DevIo_OpenDev($hash, 0, "PRESENCE_DoInit");
    }
}


#####################################
sub
PRESENCE_Undef($$)
{
    my ($hash, $arg) = @_;

    RemoveInternalTimer($hash);

    if(defined($hash->{helper}{RUNNING_PID}))
    {
        BlockingKill($hash->{helper}{RUNNING_PID});
    }

    DevIo_CloseDev($hash); 
    return undef;
}

sub
PRESENCE_Set($@)
{
    my ($hash, @a) = @_;
    my $name = $hash->{NAME};
    
    return "No Argument given" if(!defined($a[1]));

    my $usage = "Unknown argument ".$a[1].", choose one of statusRequest";

    my $powerCmd = AttrVal($name, "powerCmd", undef);
    $usage .= " power" if(defined($powerCmd));
    
    if($a[1] eq "statusRequest")
    {
        if($hash->{MODE} ne "lan-bluetooth")
        {
            Log3 $name, 5, "PRESENCE ($name) - starting local scan";
            
            return PRESENCE_StartLocalScan($hash, 1);
        }
        else
        {
            if(exists($hash->{FD}))
            {
                DevIo_SimpleWrite($hash, "now\n", 0);
            }
            else
            {
                return "PRESENCE Definition \"$name\" is not connected to ".$hash->{DeviceName}; 
            }
        } 
    }
    elsif(defined($powerCmd) && $a[1] eq "power") 
    {
        my %specials= (
        "%NAME" => $name,
        "%ADDRESS" => $hash->{ADDRESS},
        "%ARGUMENT" => $a[2]
        );
        
        $powerCmd= EvalSpecials($powerCmd, %specials);
        
        Log3 $name, 5, "PRESENCE ($name) - executing powerCmd: $powerCmd";
        my $return = AnalyzeCommandChain(undef, $powerCmd);

        if($return)
        {
            Log3 $name, 3, "PRESENCE ($name) - executed powerCmd failed: ".$return;
            readingsSingleUpdate($hash, "powerCmd", "failed",1);
            return "executed powerCmd failed: ".$return;
        }
        else
        {
            readingsSingleUpdate($hash, "powerCmd", "executed",1);
        }

        return undef;
    }
    else
    {
        return $usage;
    }
}


##########################
sub
PRESENCE_Attr(@)
{
    my @a = @_;
    my $hash = $defs{$a[1]};

    if($a[0] eq "set" && $a[2] eq "disable")
    {
        if($a[3] eq "0")
        {

            readingsSingleUpdate($hash, "state", "defined",0) if(exists($hash->{helper}{DISABLED}) and $hash->{helper}{DISABLED} == 1);

            if(defined($hash->{DeviceName}))
            {
                if(defined($hash->{FD}))
                {
                    PRESENCE_DoInit($hash) if(exists($hash->{helper}{DISABLED}));
                    $hash->{helper}{DISABLED} = 0;
                }
                else
                {
                    $hash->{helper}{DISABLED} = 0;
                    DevIo_OpenDev($hash, 0, "PRESENCE_DoInit");
                }
            }   
            else
            {
                $hash->{helper}{DISABLED} = 0;
                PRESENCE_StartLocalScan($hash);
            }

            $hash->{helper}{DISABLED} = 0;
        }
        elsif($a[3] eq "1")
        {
            if(defined($hash->{FD}))
            {   
                DevIo_SimpleWrite($hash, "stop\n", 0);
            }

            RemoveInternalTimer($hash);

            $hash->{helper}{DISABLED} = 1;
            readingsSingleUpdate($hash, "state", "disabled",1);
        }

    }
    elsif($a[0] eq "del" && $a[2] eq "disable")
    {

        readingsSingleUpdate($hash, "state", "defined",0) if(exists($hash->{helper}{DISABLED}) and $hash->{helper}{DISABLED} == 1);

        if(defined($hash->{DeviceName}))
        {
            $hash->{helper}{DISABLED} = 0;
            
            if(defined($hash->{FD}))
            {
                PRESENCE_DoInit($hash) if(exists($hash->{helper}{DISABLED}));
            }
            else
            {
                DevIo_OpenDev($hash, 0, "PRESENCE_DoInit");
            }
        }
        else
        {
            $hash->{helper}{DISABLED} = 0;
            PRESENCE_StartLocalScan($hash);
        }
    }
    elsif($a[0] eq "set" and $a[2] eq "powerOnFn")
    {
        my $powerOnFn = $a[3];
        
        $powerOnFn =~ s/^\s+//;
        $powerOnFn =~ s/\s+$//;
        
        if($powerOnFn eq "")
        {
            return "powerOnFn contains no value";
        }
    }

    return undef;
}



#####################################
# Receives an event and creates several readings for event triggering
sub
PRESENCE_Read($)
{
    my ($hash) = @_;
    my $name = $hash->{NAME};
    my $buf = DevIo_SimpleRead($hash);
    return "" if(!defined($buf));

    chomp $buf;

    Log3 $name, 5, "PRESENCE ($name) - received data: $buf";
    
    readingsBeginUpdate($hash);

    if($buf eq "absence")
    {
        readingsBulkUpdate($hash, "state", "absent");
        readingsBulkUpdate($hash, "presence", "absent");
    }
    elsif($buf =~ /present;(.+?)$/)
    {
        readingsBulkUpdate($hash, "state", "present");
        readingsBulkUpdate($hash, "presence", "present");

        if($1 =~ /^(.*);(.+)$/)
        {
            readingsBulkUpdate($hash, "room", $2);
            readingsBulkUpdate($hash, "device_name", $1);
        }
        else
        {
            readingsBulkUpdate($hash, "device_name", $1);
        }
    }
    elsif($buf eq "command accepted")
    {
        readingsBulkUpdate($hash, "command_accepted", "yes");
    }
    elsif($buf eq "command rejected")
    {
        readingsBulkUpdate($hash, "command_accepted", "no");
    }
    elsif($buf =~ /socket_closed;(.+?)$/)
    {
        Log3 $name, 3, "PRESENCE ($name) - collectord lost connection to room $1";
    }
    elsif($buf =~ /socket_reconnected;(.+?)$/)
    {
        Log3 $name , 3, "PRESENCE ($name) - collectord reconnected to room $1";
    }
    elsif($buf =~ /error;(.+?)$/)
    {
        Log3 $name, 3, "PRESENCE ($name) - room $1 cannot execute hcitool to check device";
    }
    elsif($buf =~ /error$/)
    {
        Log3 $name, 3, "PRESENCE ($name) - presenced cannot execute hcitool to check device ";
    }

    readingsEndUpdate($hash, 1);
}

sub
PRESENCE_DoInit($)
{
    my ($hash) = @_;

    if( not exists($hash->{helper}{DISABLED}) or (exists($hash->{helper}{DISABLED}) and $hash->{helper}{DISABLED} == 0))
    {
        readingsSingleUpdate($hash, "state", "active",0);
        DevIo_SimpleWrite($hash, $hash->{ADDRESS}."|".$hash->{TIMEOUT_NORMAL}."\n", 0);
    }
    else
    {
        readingsSingleUpdate($hash, "state", "disabled",0);
    }

    return undef;
}


sub
PRESENCE_Ready($)
{
    my ($hash) = @_;
   
    return DevIo_OpenDev($hash, 1, "PRESENCE_DoInit") if($hash->{MODE} eq "lan-bluetooth");
}

##########################################################################################################################
#
# 
#  Functions for local testing with Blocking.pm to ensure a smooth FHEM processing
#
#
sub PRESENCE_StartLocalScan($;$)
{
    my ($hash, $local) = @_;
    my $name = $hash->{NAME};
    my $mode = $hash->{MODE};
    
    $local = 0 unless(defined($local));
     
    if(not (exists($hash->{ADDRESS}) or exists($hash->{helper}{call})))
    {
         return undef;
    }

    unless(exists($hash->{helper}{RUNNING_PID}))
    {
        $hash->{STATE} = "active" if($hash->{STATE} eq "???" or $hash->{STATE} eq "defined");

        if($local == 0)
        {
            Log3 $name, 5, "PRESENCE ($name) - stopping timer";
            RemoveInternalTimer($hash);
        }

        if($mode eq "local-bluetooth")
        {
            Log3 $name, 5, "PRESENCE ($name) - starting blocking call for mode local-bluetooth";
            $hash->{helper}{RUNNING_PID} = BlockingCall("PRESENCE_DoLocalBluetoothScan", $name."|".$hash->{ADDRESS}."|".$local, "PRESENCE_ProcessLocalScan", 60, "PRESENCE_ProcessAbortedScan", $hash);
        }
        elsif($mode eq "lan-ping")
        {
            Log3 $name, 5, "PRESENCE ($name) - starting blocking call for mode lan-ping";
            $hash->{helper}{RUNNING_PID} = BlockingCall("PRESENCE_DoLocalPingScan", $name."|".$hash->{ADDRESS}."|".$local."|".AttrVal($name, "ping_count", "4"), "PRESENCE_ProcessLocalScan", 60, "PRESENCE_ProcessAbortedScan", $hash);
        }
        elsif($mode eq "fritzbox")
        {
            Log3 $name, 5, "PRESENCE ($name) - starting blocking call for mode fritzbox";
            $hash->{helper}{RUNNING_PID} = BlockingCall("PRESENCE_DoLocalFritzBoxScan", $name."|".$hash->{ADDRESS}."|".$local."|".AttrVal($name, "fritzbox_speed", "0"), "PRESENCE_ProcessLocalScan", 60, "PRESENCE_ProcessAbortedScan", $hash);
        }
        elsif($mode eq "shellscript")
        {
            Log3 $name, 5, "PRESENCE ($name) - starting blocking call for mode shellscript";
            $hash->{helper}{RUNNING_PID} = BlockingCall("PRESENCE_DoLocalShellScriptScan", $name."|".$hash->{helper}{call}."|".$local, "PRESENCE_ProcessLocalScan", 60, "PRESENCE_ProcessAbortedScan", $hash);
        }
        elsif($mode eq "function")
        {
            Log3 $name, 5, "PRESENCE ($name) - starting blocking call for mode function";
            $hash->{helper}{RUNNING_PID} = BlockingCall("PRESENCE_DoLocalFunctionScan", $name."|".$hash->{helper}{call}."|".$local, "PRESENCE_ProcessLocalScan", 60, "PRESENCE_ProcessAbortedScan", $hash);
        }
        
        return undef;
    }
    else
    {
        Log3 $hash->{NAME}, 4, "PRESENCE ($name) - another check is currently running. skipping check";
        
        if($local == 0)
        {
            my $seconds = (ReadingsVal($name, "state", "absent") eq "present" ? $hash->{TIMEOUT_PRESENT} : $hash->{TIMEOUT_NORMAL});
        
            Log3 $hash->{NAME}, 4, "PRESENCE ($name) - rescheduling next check in $seconds seconds";
        
            RemoveInternalTimer($hash);
            InternalTimer(gettimeofday()+$seconds, "PRESENCE_StartLocalScan", $hash, 0) unless($hash->{helper}{DISABLED});
        }
        
        return "another check is currently running";
    }
}

sub
PRESENCE_DoLocalPingScan($)
{

    my ($string) = @_;
    my ($name, $device, $local, $count) = split("\\|", $string);

    Log3 $name, 5, "PRESENCE ($name) - starting ping scan: $string";

    my $retcode;
    my $return;
    my $temp;

    if($^O =~ m/(Win|cygwin)/)
    {
        $temp = qx(ping -n $count -4 $device);

        chomp $temp;
        if($temp ne "")
        {
            Log3 $name, 5, "PRESENCE ($name) - ping command returned with output:\n$temp";
            $return = "$name|$local|".($temp =~ /TTL=\d+/ ? "present" : "absent");
        }
        else
        { 
            $return = "$name|$local|error|Could not execute ping command: \"ping -n $count -4 $device\"";
        }
    }
    else
    {
        $temp = qx(ping -c $count $device 2>&1);

        chomp $temp;
        if($temp ne "")
        {
            Log3 $name, 5, "PRESENCE ($name) - ping command returned with output:\n$temp";
            $return = "$name|$local|".(($temp =~ /\d+ [Bb]ytes (from|von)/ and not $temp =~ /[Uu]nreachable/) ? "present" : "absent");
        }
        else
        { 
            $return = "$name|$local|error|Could not execute ping command: \"ping -c $count $device\"";
        }
    }

    return $return;
}

sub 
PRESENCE_ExecuteFritzBoxCMD($$)
{

    my ($name, $cmd) = @_;
    my $status;
    my $wait;

    while(-e "/var/tmp/fhem-PRESENCE-cmd-lock.tmp" and (stat("/var/tmp/fhem-PRESENCE-cmd-lock.tmp"))[9] > (gettimeofday() - 2))
    {  
        $wait = int(rand(4))+2;
        Log3 $name, 5, "PRESENCE ($name) - ctlmgr_ctl is locked. waiting $wait seconds...";
        $wait = 1000000*$wait;
        usleep $wait;
    }

    unlink("/var/tmp/fhem-PRESENCE-cmd-lock.tmp") if(-e "/var/tmp/fhem-PRESENCE-cmd-lock.tmp");

    qx(touch /var/tmp/fhem-PRESENCE-cmd-lock.tmp);

    Log3 $name, 5, "PRESENCE ($name) - executing ctlmgr_ctl: $cmd";
    $status = qx($cmd);
    usleep 200000;
    unlink("/var/tmp/fhem-PRESENCE-cmd-lock.tmp") if(-e "/var/tmp/fhem-PRESENCE-cmd-lock.tmp");

    return $status;
}

sub
PRESENCE_DoLocalFritzBoxScan($)
{
    my ($string) = @_;
    my ($name, $device, $local, $speedcheck) = split("\\|", $string);

    Log3 $name, 5, "PRESENCE_DoLocalFritzBoxScan: $string";
    
    my $number = 0;
    my $status = 0;
    my $speed;

    my $check_command = ($device =~ /^\s*([0-9a-fA-F]{2}:){5}[0-9a-fA-F]{2}\s*$/ ? "mac" : "name");
    
    $device = uc $device if($device =~ /^\s*([0-9a-fA-F]{2}:){5}[0-9a-fA-F]{2}\s*$/);
    
    if(defined($defs{$name}{helper}{cachednr})) 
    {
        $number = $defs{$name}{helper}{cachednr};
   
        Log3 $name, 5, "PRESENCE ($name) - try checking $name as device $device with cached number $number";
        my $cached_name = "";
        
        $cached_name = PRESENCE_ExecuteFritzBoxCMD($name, "/usr/bin/ctlmgr_ctl r landevice settings/landevice$number/$check_command");    

        chomp $cached_name;
   
        # only use the cached $number if it has still the correct device name
        if($cached_name eq $device)
        {
            Log3 $name, 5, "PRESENCE ($name) - checking state with cached number ($number)";
            $status = PRESENCE_ExecuteFritzBoxCMD($name, "/usr/bin/ctlmgr_ctl r landevice settings/landevice$number/active");
            chomp $status;
            
            if($status ne "0" and $speedcheck eq "1")
            {
    	        $speed = PRESENCE_ExecuteFritzBoxCMD($name, "/usr/bin/ctlmgr_ctl r landevice settings/landevice$number/speed");
                chomp $speed;
                Log3 $name, 5, "PRESENCE ($name) - speed check returned: $speed";
                $speed = undef if($speed eq "0");
    	    }
            
            Log3 $name, 5, "PRESENCE ($name) - ctlmgr_ctl (cached: $number) returned: $status";
     
            if(not $status =~ /^\s*\d+\s*$/)
            {
                return "$name|$local|error|could not execute ctlmgr_ctl (cached)";
            }

            return ($status == 0 ? "$name|$local|absent|$number" : "$name|$local|present|$number").($speedcheck == 1 and defined($speed) ? "|$speed" :"");
        }
        else
        {
            Log3 $name, 5, "PRESENCE ($name) - cached device ($cached_name) does not match expected device ($device). perform a full scan";
        }
    }

    my $max = PRESENCE_ExecuteFritzBoxCMD($name, "/usr/bin/ctlmgr_ctl r landevice settings/landevice/count");

    chomp $max;

    Log3 $name, 5, "PRESENCE ($name) - ctlmgr_ctl (getting device count) returned: $max";

    if(not $max =~ /^\s*\d+\s*$/)
    {
        return "$name|$local|error|could not execute ctlmgr_ctl";
    }

    my $net_device;

    $number = 0;

    while($number <= $max)
    {
        $net_device = PRESENCE_ExecuteFritzBoxCMD($name, "/usr/bin/ctlmgr_ctl r landevice settings/landevice$number/$check_command");

        chomp $net_device;
    
        Log3 $name, 5, "PRESENCE ($name) - checking device number $number ($net_device)";

        if($net_device eq $device)
        {
            $status = PRESENCE_ExecuteFritzBoxCMD($name, "/usr/bin/ctlmgr_ctl r landevice settings/landevice$number/active");
     	    chomp $status;
            
            if($status ne "0" and $speedcheck eq "1")
            {
                $speed = PRESENCE_ExecuteFritzBoxCMD($name, "/usr/bin/ctlmgr_ctl r landevice settings/landevice$number/speed");
                chomp $speed;
                Log3 $name, 5, "PRESENCE ($name) - speed check returned: $speed";
                $speed = undef if($speed eq "0");
            }
   
            Log3 $name, 5, "PRESENCE ($name) - state for device number $net_device is $status";
            
            last;
        }

        $number++;
    }

    return ($status == 0 ? "$name|$local|absent" : "$name|$local|present").($number <= $max ? "|$number" : "|").($speedcheck == 1 and defined($speed) ? "|$speed" : "");
}


sub
PRESENCE_DoLocalBluetoothScan($)
{
    my ($string) = @_;
    my ($name, $device, $local) = split("\\|", $string);

    my $devname;
    my $return;
    my $wait = 1;
    my $ps;
    my $psargs = "ax";

    if(qx(ps --help 2>&1) =~ /BusyBox/g)
    {
        Log3 $name, 5, "PRESENCE ($name) - found busybox variant of ps command, using \"w\" as parameter";
        $psargs = "w";
    }
    else
    {
        Log3 $name, 5, "PRESENCE ($name) - found standard variant of ps command, using \"ax\" as parameter";
        $psargs = "ax";
    }
    
    Log3 $name, 4, "PRESENCE ($name) - executing: which hcitool";
    my $hcitool = qx(which hcitool);
    Log3 $name, 4, "PRESENCE ($name) - 'which hcitool' returns: $hcitool";
    chomp $hcitool;

    if(-x $hcitool)
    {
        while($wait)
        {   # check if another hcitool process is running
            $ps = qx(ps $psargs | grep hcitool | grep -v grep);
            if(not $ps =~ /^\s*$/)
            {
                # sleep between 1 and 5 seconds and try again
                Log3 $name, 5, "PRESENCE ($name) - another hcitool command is running. waiting...";
                sleep(rand(4)+1);
            }
            else
            {
                $wait = 0;
            }
        }
        
        Log3 $name, 5, "PRESENCE ($name) - executing: hcitool name $device";
        $devname = qx(hcitool name $device);

        chomp($devname);
        Log3 $name, 4, "PRESENCE ($name) - hcitool returned: $devname";

        if(not $devname =~ /^\s*$/)
        {
            $return = "$name|$local|present|$devname";
        }
        else
        {
            $return = "$name|$local|absent";
        }
    }
    else
    {
        $return = "$name|$local|error|no hcitool binary found. Please check that the bluez-package is properly installed";
    }

    return $return;
}

sub
PRESENCE_DoLocalShellScriptScan($)
{

    my ($string) = @_;
    my ($name, $call, $local) = split("\\|", $string);

    my $ret;
    my $return;

    Log3 $name, 5, "PRESENCE ($name) - execute local shell script: $string";

    $ret = qx($call);

    chomp $ret;
    
    Log3 $name, 5, "PRESENCE ($name) - script output: $ret";

    if(not defined($ret))
    {
        $return = "$name|$local|error|scriptcall doesn't return any output"; 
    }
    elsif($ret eq "1")
    {
        $return = "$name|$local|present";
    }
    elsif($ret eq "0")
    {
        $return = "$name|$local|absent";
    }
    else
    {
        $ret =~ s/\n/<<line-break>>/g;

        $return = "$name|$local|error|unexpected script output (expected 0 or 1): $ret"; 
    }

    return $return;
}


sub
PRESENCE_DoLocalFunctionScan($)
{

    my ($string) = @_;
    my ($name, $call, $local) = split("\\|", $string);

    my $ret;
    my $return;

    Log3 $name, 5, "PRESENCE ($name) - execute perl function: $string";

    $ret = AnalyzeCommandChain(undef, $call);

    chomp $ret;
    
    Log3 $name, 5, "PRESENCE ($name) - function returned with: $ret";
    
    if(not defined($ret))
    {
        $return = "$name|$local|error|function call doesn't return any output"; 
    }
    elsif($ret eq "1")
    {
        $return = "$name|$local|present";
    }
    elsif($ret eq "0")
    {
        $return = "$name|$local|absent";
    }
    else
    {
        $ret =~ s/\n/<<line-break>>/g;

        $return = "$name|$local|error|unexpected function output (expected 0 or 1): $ret"; 
    }



    return $return;

}

sub
PRESENCE_ProcessLocalScan($)
{
    my ($string) = @_;


    return unless(defined($string));

    my @a = split("\\|",$string);
    my $hash = $defs{$a[0]}; 
  
    my $local = $a[1];
    my $name = $hash->{NAME};
    
    Log3 $hash->{NAME}, 5, "PRESENCE ($name) - blocking scan result: $string";

    delete($hash->{helper}{RUNNING_PID});
    
    if($hash->{helper}{DISABLED})
    {
        Log3 $hash->{NAME}, 5, "PRESENCE ($name) - don't process the scan result, as $name is disabled";
        return;
    }
    
    if(defined($hash->{helper}{RETRY_COUNT}))
    {
        Log3 $hash->{NAME}, 2, "PRESENCE ($name) - check returned a valid result after ".$hash->{helper}{RETRY_COUNT}." unsuccesful ".($hash->{helper}{RETRY_COUNT} > 1 ? "retries" : "retry");
        delete($hash->{helper}{RETRY_COUNT});
    }

    if($hash->{MODE} eq "fritzbox" and defined($a[3]) and $a[3] ne "")
    {
        $hash->{helper}{cachednr} = $a[3] if(($a[2] eq "present") || ($a[2] eq "absent")); 
    }
    elsif($hash->{MODE} eq "fritzbox" and defined($hash->{helper}{cachednr}))
    {
        delete($hash->{helper}{cachednr});
    }

    readingsBeginUpdate($hash);

    if($a[2] eq "present")
    {
        readingsBulkUpdate($hash, "state", "present");
        readingsBulkUpdate($hash, "presence", "present");
        readingsBulkUpdate($hash, "device_name", $a[3]) if(defined($a[3]) and $hash->{MODE} =~ /^(lan-bluetooth|local-bluetooth)$/ );
        
        if($hash->{MODE} eq "fritzbox" and defined($a[4]))
        {
            readingsBulkUpdate($hash, "speed", $a[4]);
        }
    }
    elsif($a[2] eq "absent")
    {
        readingsBulkUpdate($hash, "state", "absent");
        readingsBulkUpdate($hash, "presence", "absent");
        if($hash->{MODE} eq "fritzbox" and defined($a[4]))
        {
            readingsBulkUpdate($hash, "speed", $a[4]);
        }
    }
    elsif($a[2] eq "error")
    {
        $a[3] =~ s/<<line-break>>/\n/g;

        Log3 $hash->{NAME}, 2, "PRESENCE ($name) - error while processing check: ".$a[3];
        readingsBulkUpdate($hash, "state", "error");
    }

    readingsEndUpdate($hash, 1);

  

    #Schedule the next check withing $timeout if it is a regular run
    if($local eq "0")
    {
        my $seconds = ($a[2] eq "present" ? $hash->{TIMEOUT_PRESENT} : $hash->{TIMEOUT_NORMAL});
        
        Log3 $hash->{NAME}, 4, "PRESENCE ($name) - rescheduling next check in $seconds seconds";
        
        RemoveInternalTimer($hash);
        InternalTimer(gettimeofday()+$seconds, "PRESENCE_StartLocalScan", $hash, 0) unless($hash->{helper}{DISABLED});
    }
}

sub
PRESENCE_ProcessAbortedScan($)
{

    my ($hash) = @_;
    my $name = $hash->{NAME};
    delete($hash->{helper}{RUNNING_PID});
    RemoveInternalTimer($hash);

    if(defined($hash->{helper}{RETRY_COUNT}))
    {
        if($hash->{helper}{RETRY_COUNT} >= 3)
        {
            Log3 $hash->{NAME}, 2, "PRESENCE ($name) - device could not be checked after ".$hash->{helper}{RETRY_COUNT}." ".($hash->{helper}{RETRY_COUNT} > 1 ? "retries" : "retry"). " (resuming normal operation)" if($hash->{helper}{RETRY_COUNT} == 3);
            InternalTimer(gettimeofday()+10, "PRESENCE_StartLocalScan", $hash, 0) unless($hash->{helper}{DISABLED});
            $hash->{helper}{RETRY_COUNT}++;
        }
        else
        {
            Log3 $hash->{NAME}, 2, "PRESENCE ($name) - device could not be checked after ".$hash->{helper}{RETRY_COUNT}." ".($hash->{helper}{RETRY_COUNT} > 1 ? "retries" : "retry")." (retrying in 10 seconds)";
            InternalTimer(gettimeofday()+10, "PRESENCE_StartLocalScan", $hash, 0) unless($hash->{helper}{DISABLED});
            $hash->{helper}{RETRY_COUNT}++;
        }

    }
    else
    {
        $hash->{helper}{RETRY_COUNT} = 1;
        InternalTimer(gettimeofday()+10, "PRESENCE_StartLocalScan", $hash, 0) unless($hash->{helper}{DISABLED});
        Log 2, "PRESENCE ($name) - device could not be checked (retrying in 10 seconds)"
    }
    
    readingsSingleUpdate($hash, "state", "timeout",1);
}

1;

=pod
=begin html

<a name="PRESENCE"></a>
<h3>PRESENCE</h3>
<ul>
  <tr><td>
  The PRESENCE module provides several possibilities to check the presence of mobile phones or similar mobile devices such as tablets.
  <br><br>
  This module provides several operational modes to serve your needs. These are:<br><br>
  <ul>
  <li><b>lan-ping</b> - A presence check of a device via network ping in your LAN/WLAN</li>
  <li><b>fritzbox</b> - A presence check by requesting the device state from the FritzBox internals (only available when running FHEM on a FritzBox!)</li>
  <li><b>local-bluetooth</b> - A presence check by searching directly for a given bluetooth device nearby</li>
  <li><b>function</b> - A presence check by using your own perl function which returns a presence state</li>
  <li><b>shellscript</b> - A presence check by using an self-written script or binary which returns a presence state</li>
  <li><b>lan-bluetooth</b> - A presence check of a bluetooth device via LAN network by connecting to a presenced or collectord instance</li>
  </ul>
  <br>
  Each mode can be optionally configured with a specific check interval and a present check interval.<br><br>
  <ul>
  <li>check-interval - The interval in seconds between each presence check. Default value: 30 seconds</li>
  <li>present-check-interval - The interval in seconds between each presence check in case the device is <i>present</i>. Otherwise the normal check-interval will be used.</li>
  </ul>
  <br><br>
  <a name="PRESENCEdefine"></a>
  <b>Define</b><br><br>
  <ul><b>Mode: lan-ping</b><br><br>
    <code>define &lt;name&gt; PRESENCE lan-ping &lt;ip-address&gt; [ &lt;check-interval&gt; [ &lt;present-check-interval&gt; ] ]</code><br>
    <br>
    Checks for a network device via PING requests and reports its presence state.<br><br>
    <u>Example</u><br><br>
    <code>define iPhone PRESENCE lan-ping 192.168.179.21</code><br>
    <br>
    <b>Mode: fritzbox</b><br><br>
    <code>define &lt;name&gt; PRESENCE fritzbox &lt;device-name/mac-address&gt; [ &lt;check-interval&gt; [ &lt;present-check-interval&gt; ] ]</code><br>
    <br>
    Checks for a network device by requesting the internal state on a FritzBox via ctlmgr_ctl. The device-name must be the same as shown in the network overview of the FritzBox or can be substituted by the MAC address with the format XX:XX:XX:XX:XX:XX<br><br>
    <i>This check is only applicable when FHEM is running on a FritzBox! The detection of absence can take about 10-15 minutes!</i><br><br>
    <u>Example</u><br><br>
    <code>define iPhone PRESENCE fritzbox iPhone-6</code><br>
    <code>define iPhone PRESENCE fritzbox 00:06:08:05:0D:00</code><br><br>
    <b>Mode: local-bluetooth</b><br><br>
    <code>define &lt;name&gt; PRESENCE local-bluetooth &lt;bluetooth-address&gt; [ &lt;check-interval&gt; [ &lt;present-check-interval&gt; ] ]</code><br>
    <br>
    Checks for a bluetooth device and reports its presence state. For this mode the shell command "hcitool" is required (provided with a <a href="http://www.bluez.org" target="_new">bluez</a> installation under Debian via APT), as well
    as a functional bluetooth device directly attached to your machine.<br><br>
    <u>Example</u><br><br>
    <code>define iPhone PRESENCE local-bluetooth 0a:8d:4f:51:3c:8f</code><br><br>
    <b>Mode: function</b><br><br>
    <code>define &lt;name&gt; PRESENCE function {...} [ &lt;check-interval&gt; [ &lt;present-check-interval&gt; ] ]</code><br>
    <br>
    Checks for a presence state via perl-code. You can use a self-written perl function to obtain the presence state of a specific device (e.g. via SNMP check).<br><br>
    The function must return 0 (absent) or 1 (present). An example can be found in the <a href="http://www.fhemwiki.de/wiki/Anwesenheitserkennung" target="_new">FHEM-Wiki</a>.<br><br>
    <u>Example</u><br><br>
    <code>define iPhone PRESENCE function {snmpCheck("10.0.1.1","0x44d77429f35c")}</code><br><br>
    <b>Mode: shellscript</b><br><br>
    <code>define &lt;name&gt; PRESENCE shellscript "&lt;path&gt; [&lt;arg1&gt;] [&lt;argN&gt;]..." [ &lt;check-interval&gt; [ &lt;present-check-interval&gt; ] ]</code><br>
    <br>
    Checks for a presence state via shell script. You can use a self-written script or binary in any language to obtain the presence state of a specific device (e.g. via SNMP check).<br><br>
    The shell must return 0 (absent) or 1 (present) on <u>console (STDOUT)</u>. Any other values will be treated as an error<br><br>
    <u>Example</u><br><br>
    <code>define iPhone PRESENCE shellscript "/opt/check_device.sh iPhone"</code><br><br>
    <b>Mode: lan-bluetooth</b><br><br>
    Checks for a bluetooth device with the help of presenced or collectord. They can be installed where-ever you like, just must be accessible via network.
     The given device will be checked for presence status.<br>
    <br>
    <code>define &lt;name&gt; PRESENCE lan-bluetooth &lt;bluetooth-address&gt; &lt;ip-address&gt;[:port]  [ &lt;check-interval&gt; ]</code><br>
    <br>
    The default port is 5111 (presenced). Alternatly you can use port 5222 (collectord)<br>
    <br>
    <u>Example</u><br><br>
    <code>define iPhone PRESENCE lan-bluetooth 0a:4f:36:d8:f9:89 127.0.0.1:5222</code><br><br>
    <u>presenced</u><br><br>
    <ul>The presence is a perl network daemon, which provides presence checks of multiple bluetooth devices over network. 
    It listens on TCP port 5111 for incoming connections from a FHEM PRESENCE instance or a running collectord.<br>
<PRE>
Usage:
  presenced -d [-p &lt;port&gt;] [-P &lt;filename&gt;]
  presenced [-h | --help]


Options:
  -p, --port
     TCP Port which should be used (Default: 5111)
  -P, --pid-file
     PID file for storing the local process id (Default: /var/run/presenced.pid)
  -d, --daemon
     detach from terminal and run as background daemon
  -v, --verbose
     Print detailed log output
  -h, --help
     Print detailed help screen
</PRE>
    
    It uses the hcitool command (provided by a <a href="http://www.bluez.org" target="_new">bluez</a> installation) 
    to make a paging request to the given bluetooth address (like 01:B4:5E:AD:F6:D3). The devices must not be visible, but
    still activated to receive bluetooth requests.<br><br>
    
    If a device is present, this is send to FHEM, as well as the device name as reading.<br><br>
    
    The presenced is available as:<br><br>
    <ul>
    <li>direct perl script file: <a href="http://svn.code.sf.net/p/fhem/code/trunk/fhem/contrib/PRESENCE/presenced" target="_new">presenced</a></li>
    <li>.deb package for Debian (noarch): <a href="http://svn.code.sf.net/p/fhem/code/trunk/fhem/contrib/PRESENCE/deb/presenced-1.3.deb" target="_new">presenced-1.3.deb</a></li>
    <li>.deb package for Raspberry Pi (raspbian): <a href="http://svn.code.sf.net/p/fhem/code/trunk/fhem/contrib/PRESENCE/deb/presenced-rpi-1.3.deb" target="_new">presenced-rpi-1.3.deb</a></li>
    </ul>
    </ul><br><br>
    <u>collectord</u><br><br>
    <ul>
    The collectord is a perl network daemon, which handles connections to several presenced installations to search for multiple bluetooth devices over network.<br><br>
    
    It listens on TCP port 5222 for incoming connections from a FHEM presence instance.
<PRE>
Usage:
  collectord -c &lt;configfile&gt; [-d] [-p &lt;port&gt;] [-P &lt;pidfile&gt;]
  collectord [-h | --help]


Options:
  -c, --configfile &lt;configfile&gt;
     The config file which contains the room and timeout definitions
  -p, --port
     TCP Port which should be used (Default: 5222)
  -P, --pid-file
     PID file for storing the local process id (Default: /var/run/collectord.pid)
  -d, --daemon
     detach from terminal and run as background daemon
  -v, --verbose
     Print detailed log output
  -l, --logfile &lt;logfile&gt;
     log to the given logfile
  -h, --help
     Print detailed help screen
</PRE>  
    Before the collectord can be used, it needs a config file, where all different rooms, which have a presenced detector, will be listed. This config file looks like:
    <br><br>
<PRE>
       	# room definition
       	# ===============
	#
	[room-name]              # name of the room
	address=192.168.0.10     # ip-address or hostname
	port=5111                # tcp port which should be used (5111 is default)
	presence_timeout=120     # timeout in seconds for each check when devices are present
	absence_timeout=20       # timeout in seconds for each check when devices are absent

	[living room]
	address=192.168.0.11
	port=5111	
	presence_timeout=180
	absence_timeout=20    
</PRE>

    If a device is present in any of the configured rooms, this is send to FHEM, as well as the device name as reading and the room which has detected the device.<br><br>
    
    The collectord is available as:<br><br>
    
    <ul>
    <li>direct perl script file: <a href="http://svn.code.sf.net/p/fhem/code/trunk/fhem/contrib/PRESENCE/collectord" target="_new">collectord</a></li>
    <li>.deb package for Debian (noarch): <a href="http://svn.code.sf.net/p/fhem/code/trunk/fhem/contrib/PRESENCE/deb/collectord-1.4.deb" target="_new">collectord-1.4.deb</a></li>
    </ul>
    </ul><br><br>

  </ul>
  <br>
  <a name="PRESENCEset"></a>
  <b>Set</b>
  <ul>
  <li><b>statusRequest</b> - Schedules an immediatly check.</li>
  <li><b>power</b> - Executes the given power command which is set as attribute to power (on or off) the device (only when attribute "powerCmd" is set)</li>
  </ul>
  <br>

  <a name="PRESENCEget"></a>
  <b>Get</b>
  <ul>
  N/A
  </ul>
  <br>

  <a name="PRESENCEattr"></a>
  <b>Attributes</b><br><br>
  <ul>
    <li><a href="#do_not_notify">do_not_notify</a></li>
    <li><a href="#readingFnAttributes">readingFnAttributes</a></li><br>
    <li><a>disable</a></li>
    If this attribute is activated, an active check will be disabled.<br><br>
    Possible values: 0 => not disabled , 1 => disabled<br>
    Default Value is 0 (not disabled)<br><br>
    <li><a>ping_count</a></li> (Only in Mode "ping" on non-Windows machines applicable)<br>
    Changes the count of the used ping packets to recognize a present state. Depending on your network performance sometimes a packet can be lost or blocked.<br><br>
    Default Value is 4 (packets)<br><br>
    <li><a>fritzbox_speed</a></li> (only for mode "fritzbox")<br>
    When this attribute is enabled, the network speed is checked in addition to the device state.<br>
    This only makes sense for wireless devices connected directly to the FritzBox.
    <br><br>
    Possible values: 0 => do not check speed, 1 => check speed when device is active<br>
    Default value is 0 (no speed check)
    <br><br>
    <li><a>powerCmd</a></li><br>
    Define a FHEM command, which powers on or off the device.<br><br>
    
    When executing the powerCmd (set command: power) following placeholders will be replaced by there corresponding values:<br><br>
    <ul>
    <li><code>%NAME</code> - name of the PRESENCE definition</li>
    <li><code>%ADDRESS</code> - the address of the PRESENCE definition as given in the define statement</li>
    <li><code>%ARGUMENT</code> - the argument given to the power set command (e.g. "on" or "off)</li>
    </ul>
    <br>
    Example FHEM commands:<br><br>
    <ul>
        <li><code>set PowerSwitch_1 on</code></li>
        <li><code>set PowerSwitch_1 %ARGUMENT</code></li>
        <li><code>"/opt/power_on.sh %ADDRESS"</code></li>
        <li><code>{powerOn("%ADDRESS", "username", "password")}</code></li>
    </ul>
  </ul>
  <br>
 
  <a name="PRESENCEevents"></a>
  <b>Generated Events:</b><br><br>
  <ul>
    <u>General Events:</u><br><br>
    <ul>
    <li><b>state</b>: (absent|present|disabled|error|timeout) - The state of the device or "disabled" when the disable attribute is enabled</li>
    <li><b>presence</b>: (absent|present) - The state of the device</li>
    <li><b>powerCmd</b>: (executed|failed) - power command was executed or has failed</li>
    </ul><br><br>
    <u>Bluetooth specific events:</u><br><br>
    <ul>
    <li><b>device_name</b>: $name - The name of the Bluetooth device in case it's present</li>
    </ul><br><br>
    <u>presenced/collectord specific events:</u><br><br>
    <ul>
    <li><b>command_accepted</b>: $command_accepted (yes|no) - Was the last command acknowleged and accepted by the presenced or collectord?</li>
    <li><b>room</b>: $room - If the module is connected with a collector daemon this event shows the room, where the device is located (as defined in the collectord config file)</li>
    </ul>
  </ul>
</ul>


=end html

=begin html_DE

<a name="PRESENCE"></a>
<h3>PRESENCE</h3>
<ul>
  <tr><td>
  Das PRESENCE Module bietet mehrere M&ouml;glichkteiten um die Anwesenheit von Handys/Smartphones oder anderen mobilen Ger&auml;ten (z.B. Tablets) zu erkennen.
  <br><br>
  Dieses Modul bietet dazu mehrere Modis an um Anwesenheit zu erkennen. Diese sind:<br><br>
  <ul>
  <li><b>lan-ping</b> - Eine Erkennung auf Basis von Ping-Tests im lokalen LAN/WLAN</li>
  <li><b>fritzbox</b> - Eine Erkennung aufgrund der internen Abfrage des Status auf der FritzBox (nur m&ouml;glich, wenn FHEM auf einer FritzBox l&auml;uft)</li>
  <li><b>local-bluetooth</b> - Eine Erkennung auf Basis von Bluetooth-Abfragen durch den FHEM Server. Das Ger&auml;t muss dabei in Empfangsreichweite sein, aber nicht sichtbar sein</li>
  <li><b>function</b> - Eine Erkennung mithilfe einer selbst geschriebenen Perl-Funktion, welche den Anwesenheitsstatus ermittelt.</li>
  <li><b>shellscript</b> - Eine Erkennung mithilfe eines selbst geschriebenen Skriptes oder Programm (egal in welcher Sprache).</li>
  <li><b>lan-bluetooth</b> - Eine Erkennung durch Bluetooth-Abfragen via Netzwerk (LAN/WLAN) in ein oder mehreren R&auml;umen</li>
  </ul>
  <br>
  Jeder Modus kann optional mit spezifischen Pr&uuml;f-Intervallen ausgef&uuml;hrt werden.<br><br>
  <ul>
  <li>check-interval - Das normale Pr&uuml;finterval in Sekunden für eine Anwesenheitspr&uuml;fung. Standardwert: 30 Sekunden</li>
  <li>present-check-interval - Das Pr&uuml;finterval in Sekunden, wenn ein Ger&auml;t anwesend (<i>present</i>) ist. Falls nicht angegeben, wird der Wert aus check-interval verwendet</li>
  </ul>
  <br><br>
  <a name="PRESENCEdefine"></a>
  <b>Define</b><br><br>
  <ul><b>Modus: lan-ping</b><br><br>
    <code>define &lt;name&gt; PRESENCE lan-ping &lt;IP-Addresse oder Hostname&gt; [ &lt;Interval&gt; [ &lt;Anwesend-Interval&gt; ] ]</code><br>
    <br>
    Pr&uuml;ft ob ein Ger&auml;t &uuml;ber Netzwerk (&uuml;blicherweise WLAN) auf Ping-Anfragen reagiert und setzt entsprechend den Anwesenheitsstatus.<br><br>
    <u>Beispiel</u><br><br>
    <code>define iPhone PRESENCE lan-ping 192.168.179.21</code><br><br>
    <b>Modus: fritzbox</b><br><br>
    <code>define &lt;name&gt; PRESENCE fritzbox &lt;Ger&auml;tename/MAC-Adresse&gt; [ &lt;Interval&gt; [ &lt;Anwesend-Interval&gt; ] ]</code><br>
    <br>
    Pr&uuml;ft ob ein Ger&auml;t welches per WLAN mit der FritzBox verbunden ist, erreichbar durch Abfrage des Status mit dem Befehl ctlmgr_ctl. 
    Der Ger&auml;tename (Parameter: &lt;Ger&auml;tename&gt;) muss dem Namen entsprechen, welcher im Men&uuml;punkt "Heimnetz" auf der FritzBox-Oberfl&auml;che angezeigt wird oder kann durch die MAC-Adresse im Format XX:XX:XX:XX:XX:XX ersetzt werden.<br><br>
    <i>Dieser Modus ist nur verwendbar, wenn FHEM auf einer FritzBox l&auml;uft! Die Erkennung einer Abwesenheit kann ca. 10-15 Minuten dauern!</i><br><br>
    <u>Beispiel</u><br><br>
    <code>define iPhone PRESENCE fritzbox iPhone-6</code><br>
    <code>define iPhone PRESENCE fritzbox 00:06:08:05:0D:00</code><br><br>
    <b>Modus: local-bluetooth</b><br><br>
    <code>define &lt;name&gt; PRESENCE local-bluetooth &lt;Bluetooth-Adresse&gt; [ &lt;Interval&gt; [ &lt;Anwesend-Interval&gt; ] ]</code><br>
    <br>
    Pr&uuml;ft ob ein Bluetooth-Ger&auml;t abgefragt werden kann und meldet dies als Anwesenheit. F&uuml;r diesen Modus wird der Shell-Befehl "hcitool" ben&ouml;tigt
    (wird durch das Paket <a href="http://www.bluez.org" target="_new">bluez</a> bereitgestellt), sowie ein funktionierender Bluetooth-Empf&auml;nger (intern oder als USB-Stick)<br><br>
    <u>Beispiel</u><br><br>
    <code>define iPhone PRESENCE local-bluetooth 0a:4f:36:d8:f9:8</code><br><br>
    <b>Modus: function</b><br><br>
    <code>define &lt;name&gt; PRESENCE function {...} [ &lt;Interval&gt; [ &lt;Anwesend-Interval&gt; ] ]</code><br>
    <br>
    Pr&uuml;ft den Anwesenheitsstatus mithilfe einer selbst geschriebenen Perl-Funktion (z.B. SNMP Abfrage).<br><br>
    Diese Funktion muss 0 (Abwesend) oder 1 (Anwesend) zurückgeben. Ein entsprechendes Beispiel findet man im <a href="http://www.fhemwiki.de/wiki/Anwesenheitserkennung" target="_new">FHEM-Wiki</a>.<br><br>
    <u>Beispiel</u><br><br>
    <code>define iPhone PRESENCE function {snmpCheck("10.0.1.1","0x44d77429f35c")</code><br><br>
    <b>Mode: shellscript</b><br><br>
    <code>define &lt;name&gt; PRESENCE shellscript "&lt;Skript-Pfad&gt; [&lt;arg1&gt;] [&lt;argN&gt;]..." [ &lt;Interval&gt; [ &lt;Anwesend-Interval&gt; ] ]</code><br>
    <br>
    Pr&uuml;ft den Anwesenheitsstatus mithilfe eines selbst geschrieben Skripts oder Programmes (egal in welcher Programmier-/Skriptsprache)<br><br>
    Der Aufruf dieses Skriptes muss eine 0 (Abwesend) oder 1 (Anwesend) auf der <u>Kommandozeile (STDOUT)</u> ausgeben. Alle anderen Werte/Ausgaben werden als Fehler behandelt.<br><br>
    <u>Beispiel</u><br><br>
    <code>define iPhone PRESENCE shellscript "/opt/check_device.sh iPhone"</code><br><br>
    <b>Modus: lan-bluetooth</b><br><br>
    Pr&uuml;ft ein Bluetooth-Ger&auml;t auf Anwesenheit &uuml;ber Netzwerk mit Hilfe von presenced oder collectord. Diese k&ouml;nnen auf jeder Maschine installiert werden,
    welche eine Standard-Perl-Umgebung bereitstellt und &uuml;ber Netzwerk erreichbar ist.
    <br>
    <br>
    <code>define &lt;name&gt; PRESENCE lan-bluetooth &lt;Bluetooth-Adresse&gt; &lt;IP-Adresse&gt;[:Port] [ &lt;Interval&gt; ]</code><br>
    <br>
    Der Standardport ist 5111 (presenced). Alternativ kann man den Port 5222 (collectord) nutzen. Generell ist der Port aber frei w&auml;hlbar.<br><br>
    <u>Beispiel</u><br><br>
    <code>define iPhone PRESENCE lan-bluetooth 0a:4f:36:d8:f9:89 127.0.0.1:5222</code><br><br>
    <u>presenced</u><br><br>
    <ul>Der presenced ist ein Perl Netzwerk Dienst, welcher eine Bluetooth-Anwesenheitserkennung von ein oder mehreren Ger&auml;ten &uuml;ber Netzwerk bereitstellt. 
    Dieser lauscht standardm&auml;&szlig;ig auf TCP Port 5111 nach eingehenden Verbindungen von dem PRESENCE Modul oder einem collectord.<br>
<PRE>
Usage:
  presenced -d [-p &lt;port&gt;] [-P &lt;filename&gt;]
  presenced [-h | --help]


Options:
  -p, --port
     TCP Port which should be used (Default: 5111)
  -P, --pid-file
     PID file for storing the local process id (Default: /var/run/presenced.pid)
  -d, --daemon
     detach from terminal and run as background daemon
  -v, --verbose
     Print detailed log output
  -h, --help
     Print detailed help screen
</PRE>
    
    Zur Bluetooth-Abfrage wird der Shell-Befehl "hcitool" verwendet (Paket: <a href="http://www.bluez.org" target="_new">bluez</a>) 
    um sogenannte "Paging-Request" an die gew&uuml;nschte Bluetooth Adresse (z.B. 01:B4:5E:AD:F6:D3) durchzuf&uuml;hren. Das Ger&auml;t muss dabei nicht sichtbar sein, allerdings st&auml;ndig aktiviert sein
    um Bluetooth-Anfragen zu beantworten.
    <br><br>
    
    Wenn ein Ger&auml;t anwesend ist, wird dies an FHEM &uuml;bermittelt zusammen mit dem Ger&auml;tenamen als Reading.<br><br>
    
    Der presenced ist zum Download verf&uuml;gbar als:<br><br>
    <ul>
    <li>Perl Skript: <a href="http://svn.code.sf.net/p/fhem/code/trunk/fhem/contrib/PRESENCE/presenced" target="_new">presenced</a></li>
    <li>.deb Paket f&uuml;r Debian (architekturunabh&auml;ngig): <a href="http://svn.code.sf.net/p/fhem/code/trunk/fhem/contrib/PRESENCE/deb/presenced-1.3.deb" target="_new">presenced-1.3.deb</a></li>
    <li>.deb Paket f&uuml;r Raspberry Pi (raspbian): <a href="http://svn.code.sf.net/p/fhem/code/trunk/fhem/contrib/PRESENCE/deb/presenced-rpi-1.3.deb" target="_new">presenced-rpi-1.3.deb</a></li>
    </ul>
    </ul><br><br>
    <u>collectord</u><br><br>
    <ul>
    Der collectord ist ein Perl Netzwerk Dienst, welcher Verbindungen zu mehreren presenced-Instanzen verwaltet um eine koordinierte Suche nach ein oder mehreren Bluetooth-Ger&auml;ten &uuml;ber Netzwerk durchzuf&uuml;hren.<br><br>
    
    Er lauscht auf TCP port 5222 nach eingehenden Verbindungen von einem PRESENCE Modul.
<PRE>
Usage:
  collectord -c &lt;configfile&gt; [-d] [-p &lt;port&gt;] [-P &lt;pidfile&gt;]
  collectord [-h | --help]


Options:
  -c, --configfile &lt;configfile&gt;
     The config file which contains the room and timeout definitions
  -p, --port
     TCP Port which should be used (Default: 5222)
  -P, --pid-file
     PID file for storing the local process id (Default: /var/run/collectord.pid)
  -d, --daemon
     detach from terminal and run as background daemon
  -v, --verbose
     Print detailed log output
  -l, --logfile &lt;logfile&gt;
     log to the given logfile
  -h, --help
     Print detailed help screen
</PRE>  
    Bevor der collectord verwendet werden kann, ben&ouml;tigt er eine Konfigurationsdatei in welcher alle R&auml;ume mit einem presenced-Agenten eingetragen sind. Diese Datei sieht wie folgt aus:
    <br><br>
<PRE>
       	# Raum Definitionen
       	# =================
	#
	[Raum-Name]              # Name des Raumes
	address=192.168.0.10     # IP-Adresse oder Hostname
	port=5111                # TCP Port welcher benutzt werden soll (standardm&auml;&szlig;ig 5111)
	presence_timeout=120     # Pr&uuml;finterval in Sekunden f&uuml;r jede Abfrage eines Ger&auml;tes, welches anwesend ist
	absence_timeout=20       # Pr&uuml;finterval in Sekunden f&uuml;r jede Abfrage eines Ger&auml;tes, welches abwesend ist

	[Wohnzimmer]
	address=192.168.0.11
	port=5111	
	presence_timeout=180
	absence_timeout=20    
</PRE>
<br>
    Wenn ein Ger&auml;t in irgend einem Raum anwesend ist, wird dies an FHEM &uuml;bermittelt, zusammen mit dem Ger&auml;tenamen und dem Raum, in welchem das Ger&auml;t erkannt wurde.<br><br>
    
    Der collectord ist zum Download verf&uuml;gbar als:<br><br>
    
    <ul>
    <li>Perl Skript:  <a href="http://svn.code.sf.net/p/fhem/code/trunk/fhem/contrib/PRESENCE/collectord" target="_new">collectord</a></li>
    <li>.deb Paket f&uuml;r Debian (architekturunabh&auml;ngig):  <a href="http://svn.code.sf.net/p/fhem/code/trunk/fhem/contrib/PRESENCE/deb/collectord-1.4.deb" target="_new">collectord-1.4.deb</a></li>
    </ul>
    </ul>

  </ul>
  <br>
  <a name="PRESENCEset"></a>
  <b>Set</b>
  <ul>
  
  <li><b>statusRequest</b> - Startet einen sofortigen Check.</li> 
  <li><b>power</b> - Startet den powerCmd-Befehl welche durch den Parameter powerCmd angegeben ist (Nur wenn das Attribut "powerCmd" definiert ist)</li>
  </ul>
  <br>

  <a name="PRESENCEget"></a>
  <b>Get</b>
  <ul>
  N/A
  </ul>
  <br>

  <a name="PRESENCEattr"></a>
  <b>Attributes</b><br><br>
  <ul>
    <li><a href="#do_not_notify">do_not_notify</a></li>
    <li><a href="#readingFnAttributes">readingFnAttributes</a></li><br>
    <li><a>disable</a></li>
    Wenn dieses Attribut aktiviert ist, wird die Anwesenheitserkennung nicht mehr durchgef&uuml;hrt.<br><br>
    M&ouml;gliche Werte: 0 => Erkennung durchf&uuml;hren , 1 => Keine Erkennungen durchf&uuml;hren<br>
    Standardwert ist 0 (Erkennung durchf&uuml;hren)<br><br>
    <li><a>ping_count</a></li> (Nur im Modus "ping" anwendbar auf Nicht-Windows-Maschinen)<br>
    Verändert die Anzahl der Ping-Pakete die gesendet werden sollen um die Anwesenheit zu erkennen. 
    Je nach Netzwerkstabilität können erste Pakete verloren gehen oder blockiert werden.<br><br>
    Standartwert ist 4 (Versuche)<br><br>
    <li><a>fritzbox_speed</a></li> (Nur im Modus "fritzbox")<br>
    Zus&auml;tzlich zum Status des Ger&auml;ts wird die aktuelle Verbindungsgeschwindigkeit ausgegeben<br>
    Das macht nur bei WLAN Geräten Sinn, die direkt mit der FritzBox verbunden sind. Bei abwesenden Ger&auml;ten wird als Geschwindigkeit 0 ausgegeben.
    <br><br>
    M&ouml;gliche Werte: 0 => Geschwindigkeit nicht pr&uuml;fen, 1 => Geschwindigkeit pr&uuml;fen<br>
    Standardwert ist 0 (Keine Geschwindigkeitspr&uuml;fung)
    <br><br>
    <li><a>powerCmd</a></li><br>
    Ein FHEM-Befehl, welcher das Ger&auml;t schalten kann.<br><br>
    
    Wenn der power-Befehl ausgef&uuml;hrt wird (set-Befehl: power) werden folgende Platzhalter durch ihre entsprechenden Werte ersetzt:<br><br>
    <ul>
    <li><code>%NAME</code> - Name der PRESENCE-Definition</li>
    <li><code>%ADDRESS</code> - Die &uuml;berwachte Addresse der PRESENCE Definition, wie sie im define-Befehl angegeben wurde.</li>
    <li><code>%ARGUMENT</code> - Das Argument, was dem Set-Befehl "power" &uuml;bergeben wurde. (z.B. "on" oder "off")</li>
    </ul>
    <br>
    Beispielhafte FHEM-Befehle:<br><br>
    <ul>
        <li><code>set PowerSwitch_1 on</code></li>
        <li><code>set PowerSwitch_1 %ARGUMENT</code></li>
        <li><code>"/opt/power_on.sh %ADDRESS"</code></li>
        <li><code>{powerOn("%ADDRESS", "username", "password")}</code></li>
    </ul>
    </ul>
  <br>
 
  <a name="PRESENCEevents"></a>
  <b>Generierte Events:</b><br><br>
  <ul>
    <u>Generelle Events:</u><br><br>
    <ul>
    <li><b>state</b>: (absent|present|disabled|error|timeout) - Der Anwesenheitsstatus eine Ger&auml;tes (absent = abwesend; present = anwesend) oder "disabled" wenn das disable-Attribut aktiviert ist</li>
    <li><b>presence</b>: (absent|present) - Der Anwesenheitsstatus eine Ger&auml;tes (absent = abwesend; present = anwesend)</li>
    <li><b>powerCmd</b>: (executed|failed) - Ausf&uuml;hrung des power-Befehls war erfolgreich.</li>
    </ul><br><br>
    <u>Bluetooth-spezifische Events:</u><br><br>
    <ul>
    <li><b>device_name</b>: $name - Der Name des Bluetooth-Ger&auml;tes, wenn es anwesend (Status: present) ist</li>
    </ul><br><br>
    <u>presenced-/collectord-spezifische Events:</u><br><br>
    <ul>
    <li><b>command_accepted</b>: $command_accepted (yes|no) - Wurde das letzte Kommando an den presenced/collectord akzeptiert (yes = ja, no = nein)?</li>
    <li><b>room</b>: $room - Wenn das Modul mit einem collectord verbunden ist, zeigt dieses Event den Raum an, in welchem dieses Ger&auml;t erkannt wurde (Raumname entsprechend der Konfigurationsdatei des collectord)</li>
    </ul>
  </ul>
</ul>


=end html_DE

=cut