FHEM/fhem-mirror
2
0
Fork 0
mirror of https://github.com/fhem/fhem-mirror.git synced 2025-01-31 06:39:11 +00:00
Code Issues Releases Wiki Activity
8f2737a58d
fhem-mirror/fhem/webfrontend/pgm3/config.php
nitroxmh 96845eb5fb Bugfix: timeproblem notify, Feature: userdefs.php better gnuplot picture, FS20 with HM 
git-svn-id: https://svn.fhem.de/fhem/trunk@1572 2b470e98-0d58-463d-a4d8-8e2adae1ed80
2012-05-20 20:03:43 +00:00

420 lines
19 KiB
PHP
Raw Blame History

<?php
##################################################################################
#### pgm3 -- a PHP-webfrontend for fhem.pl
### Look at http://www.fhemwiki.de for more information
###### required settings
#$fhem="fritz.box"; # only php5 is supported! On which machine is fhem runnning??
$fhem="localhost"; # only php5 is supported! On which machine is fhem runnning??
# it needs not to be on the same machine as fhem
# if it is not localhost then the fhem.cfg must
# run global: "attr global port <nr> global"
$fhemport="7072"; # port of fhem.pl
#$logpath="/mnt/fritzbox/"; # where are your logs? Use a writabel nfs-share if pgm3 and fhem are not on the same machine
#mount your fritzbox with something like this in the /etc/fstab: //fritz.box/fritz.nas /mnt/fritzbox cifs guest 0 0
$logpath="/var/tmp/"; # where are your logs? Use a writabel nfs-share if pgm3 and fhem are not on the same machine
$AbsolutPath="/var/www/"; # where ist your pgm3?
###### DBlog instead of Filelogs -- only for experienced Users!
## Look at contrib/dblog and http://fhemwiki.de for further information
$DBUse="0"; # Wanna use DB-Logging instead of File-Logging? Use 1 for ye s and 0 for no.
$DBNode="localhost"; # On which machine is your db running?
$DBName="fhem"; # Whats the name of your DB for fhem?
$DBUser="USER"; # Enter the username to connect to the DB.
$DBPass="PASSWD"; # Enter the password which is needed to connect to the DB
##################################################################################
###### nice to have
##### logrotate of hms, ks300, fht
# this is only possible, if the webserver (e.g.wwwrun) has the rights ro write the
# files from fhem.pl. If you want that then run fhem.pl as wwwrun too.
# if 'yes' then only the needed lines are in the logfiles, the rest will be deleted.
$logrotate='yes'; # yes/no default='yes'
## Kioskmode. Only show but don't switch anything. Values: on/off
$kioskmode='off';
## Webcams
$showwebcam=0; #shows webcam-Urls or other pictures (0/1)
$webcamwidth='150'; # the width of the shown picture
$wgetpath="/usr/bin/wget"; # you need the package wget for http, ftp...
$webcamroom='donthide'; # existing room. Otherwise it will either
# be in ALL or wiht 'donthide' not hided
#$webcam[0]='http://webcam/IMAGE.JPG';
#$webcam[1]='http://webcam2/IMAGE.JPG';
#$webcam[1]='http://www.bostream.nu/hoganas/OutsideTempHistory.gif';
#$webcam[1]='IMAGE.PNG'; # Supported are Webcams with http:// ftp:// ....
# and Images wich must be copied to <pgm3>/tmp/
# $webcam[2]='http://...';
# ...
# Weather # Google-Api. It requires an Internet Connection
$enableweather=1; # show the google-weather?
$weathercity='Butzbach';
$weathercountry='Germany';
$weatherlang='de';
#$weatherlang='en';
$weatherroom='donthide'; # existing room. Otherwise it will either
# $weatherroom='(19)Garten'; # existing room. Otherwise it will either
# be in ALL or with 'donthide' not hided
##############################################################################################
## FHZ-DEVICES
$show_general=1; #field to type FHZ1000-orders 0/1 Default:1
$show_fs20pulldown=1; #Pull-Down for the FS20 Devices 0/1 Default:1
$show_hmpulldown=1; #Pull-Down for the HomeMatic Devices 0/1 Default:1
$show_fhtpulldown=1; #Pull-Down for the FHT-Devices 0/1 Default:1
$show_logpulldown=1; #Pull-Down for Log-files and FS20 (grep fhem.log)
$logsort='| sort -r'; #sort the Log-Output how you want;
##############################################################################################
# ATTENTION: the changes of sizes only affects after the next build of pictures!
# or delete the old pictures: rm <pgm>/tmp/*
##############################################################################################
## FS20-Device, adjust it if you have e.g. long titles
#$imgmaxxfs20=166; # Size of the pictures, default=85
$imgmaxxfs20=115; # Size of the pictures, default=115
$imgmaxyfs20=75; # default=75
$fs20fontsizetitel=10; # default=10
$fs20maxiconperline=7; # default=r79
# look at http://fhemwiki.de for explanations
$roomname='0'; # Show Roomname on Button [1|0]
$roomcorr='5'; # Correction for Iconposition if roomname = 0 [n]
$dategerman='1'; # Date in German Format (25.03.2012) [1|0]
$umlaute='1'; # Changes "ue" in "<22>"... [1|0]
$namesortbutton='1'; # [1|0]
$namesortbuttonsign='_'; # If $namesortbutton = 1 the Sign "_" will replace with " " [x]
$namereplacebutton='1'; # Changes "This_is_a_Test" in "This is a Test" [1|0]
$namereplacebuttonsign='_'; # If $namereplaceroom = 1 the Sign "_" will replace with " " [x]
# room. Write e.g. "attr rolowz room wzo"
# into your fhem.cfg and restart fhem.pl
# this will be marked on the FS20-Button.
$txtroom=""; # default=""; example: $txtroom="room: ";
# room hidden will not be shown
##############################################################################################
## ROOMS adjust it if you have e.g. long titles
$showroombuttons=1; # default 1 Values 0/1
$imgmaxxroom=$imgmaxxfs20; # Size of the pictures, default=$imgmaxxfs20
$imgmaxyroom=22; # default=30
$roomfontsizetitel=10; # default=9
$roommaxiconperline=$fs20maxiconperline-1; # default=$fs20maxiconperline
$namesortroom='1'; # [1|0]
$namesortroomsign=')'; # If $namesortroom = 1 the Sign ")" will replace with " " [x]
$namereplaceroom='1'; # Changes "This_is_a_Test" in "This is a Test" [1|0]
$namereplaceroomsign='_'; # If $namereplaceroom = 1 the Sign "_" will replace with " " [x]
##############################################################################################
## FHT-Devices
$imgmaxxfht=725; #Size of the pictures Default: 725
$imgmaxyfht=52;
$show_desiredtemp=1; # show the desired_temp as a graphic (0/1)
$desR='255'; $desG='255'; $desB='255'; # Color of desired-temp-line Red/Green/Blue (Default: 255/255/255)
$show_actuator=1; # show the actuator-value as a graphic (0/1)
$actR='255'; $actG='247'; $actB='200'; # Color of Actuator-line Red/Green/Blue (Default: 255/247/200)
$FHTyrange='14:31'; # Temperature in gnuplot. Default 14 to 31 (Celsius)
$FHTy2range='0:70'; # Actuator in gnuplot. Default 0 to 70 (Percent)
$maxcount='510'; # Maximum count of pixel (from right to left) (Default:460)
$XcorrectDate=380; # Text of e.g. Date from the right side (Default:380)
$XcorrectMainText=32; # Text of main text from the right side (Default: 32)
$logrotateFHTlines=8200; # automatic Logrotate; $logrotate must be 'yes'.
# Default:8200
# read docs/logrotate if you want adjust it manually!
# otherwise the system will slow down
# pgm3 (user www-data) needs the rights to write the logs
# from fhem.pl (user = ???)
##############################################################################################
## HMS-Devices
$imgmaxxhms=725; #Size of the pictures. Default: 725
$imgmaxyhms=52;
$maxcountHMS='575'; # Maximum count of pixel (from right to left) (Default:575)
$XcorrectMainTextHMS=25; # Text of main text from the right side (Default:)
$showdewpoint='yes'; # Dewpoint (german: taupunkt)
$logrotateHMSlines=1500; # automatic Logrotate; $logrotate must be 'yes'.
# Default:1500
# read docs/logrotate if you want adjust it manually!
# otherwise the system will slow down
# pgm3 (user www-data) needs the rights to write the logs
# from fhem.pl (user = ???)
##############################################################################################
## KS300-Device
$imgmaxxks=725; #Size of the pictures Default: 725
$imgmaxyks=52;
$showbft=1; # Display values additionaly in Beafort. Values: 0 /1 Default:1
$maxcountKS='575'; # Maximum count of pixel (from right to left) (Default:575)
$showdewpointks300='yes'; # Dewpoint (german: taupunkt)
$XcorrectMainTextKS=45; # Text of main text from the right side (Default: 35)
$logrotateKS300lines=13000; # automatic Logrotate; $logrotate must be 'yes'.
# Default: 13000
# read docs/logrotate if you want adjust it manually
# otherwise the system will slow down
# pgm3 (user www-data) needs the rights to write the logs
# from fhem.pl (user = ???)
##############################################################################################
## USERDEF
#
# Create your own graphics! If you have separate Programs (e.g. wired devices) then create your own
# logfile and tell pgm3 to use it.
# We only need a data/time-field in the form <date>_<time>, e.g. 2007-10-13_13:45:14
# and a field with a numeric value e.g. 0.0
#Example:
####################################################
# 2007-10-13_13:45:14 solarI Is: 0.0 Vs: 4.5 T: 22
####################################################
# Field1: 2007-10-13_13:45:14
# Field2: solarI
# Field3: Is:
# Field4: 0.0
#...
# Field1 must be the date/time-field. Then tell pgm3 with $userdef[x]['valuefield'] (see below)
# the field with the needed value. It is possible to create several graphics with one logfile.
# Do you want user defined graphics? 1/0 Default: 0
$UserDefs=0;
#####################
## Userdef: 0
# the sortnumbers must be complete. eg. 0 1 2 3 or 2 0 3 1 and so on
#$sortnumber=0;
# No blanks or other special signs!!
#$userdef[$sortnumber]['name']='SolarV';
#In which field are the values?? See the example above
#$userdef[$sortnumber]['valuefield']=4;
#Type of Device [temperature | piri | fs20] pgm3 will try to generate a gnuplot picture
#$userdef[$sortnumber]['gnuplottype']='temperature';
# example, path to the logfile with the entrys like above
#$userdef[$sortnumber]['logpath']=$logpath.'/lse_solarV.log';
#$userdef[$sortnumber]['room']='garden';
# Semantic eg. Voltage
#$userdef[$sortnumber]['semlong']='Voltage';
# Semantic short e.g. V
#$userdef[$sortnumber]['semshort']='V';
#Size of the pictures. Default: 725
#$userdef[$sortnumber]['imagemax']=725;
#$userdef[$sortnumber]['imagemay']=52;
# Maximum count of pixel (from right to left) (Default:575)
#$userdef[$sortnumber]['maxcount']=575;
# Text of main text from the right side (Default:)
#$userdef[$sortnumber]['XcorrectMainText']=25;
# automatic Logrotate; $logrotate must be 'yes'.
# Default:2200
# read docs/logrotate if you want adjust it manually!
# otherwise the system will slow down
# pgm3 (user www-data) needs the rights to write the logs
# of fhem.pl (user = ???)
#$userdef[$sortnumber]['logrotatelines']=2200;
########################
# example:
#define solarpumpe.log FileLog /var/tmp/solarpumpe.log solarpumpe:.*(on|off).*
$sortnumber=0;
$userdef[$sortnumber]['name']='SolarPumpe';
#$userdef[$sortnumber]['name']='';
$userdef[$sortnumber]['valuefield']=3;
$userdef[$sortnumber]['gnuplottype']='fs20';
$userdef[$sortnumber]['logpath']='/var/tmp/solarpumpe.log';
$userdef[$sortnumber]['room']='cellar';
$userdef[$sortnumber]['semlong']='Solarpumpe';
$userdef[$sortnumber]['semshort']='';
$userdef[$sortnumber]['imagemax']=725;
$userdef[$sortnumber]['imagemay']=52;
$userdef[$sortnumber]['maxcount']=575;
$userdef[$sortnumber]['XcorrectMainText']=25;
$userdef[$sortnumber]['logrotatelines']=50;
##########################
$sortnumber=1;
$userdef[$sortnumber]['name']='netbook';
$userdef[$sortnumber]['valuefield']=3;
$userdef[$sortnumber]['gnuplottype']='fs20';
$userdef[$sortnumber]['logpath']='/var/tmp/netbook.User.log';
$userdef[$sortnumber]['room']='wgo';
$userdef[$sortnumber]['semlong']='netbook';
$userdef[$sortnumber]['semshort']='';
$userdef[$sortnumber]['imagemax']=725;
$userdef[$sortnumber]['imagemay']=52;
$userdef[$sortnumber]['maxcount']=575;
$userdef[$sortnumber]['XcorrectMainText']=25;
$userdef[$sortnumber]['logrotatelines']=2000;
##########################
$sortnumber=2;
$userdef[$sortnumber]['name']='PiriU';
$userdef[$sortnumber]['valuefield']=3;
$userdef[$sortnumber]['gnuplottype']='piri';
$userdef[$sortnumber]['logpath']='/var/tmp/piriu.log';
$userdef[$sortnumber]['room']='wgu';
$userdef[$sortnumber]['semlong']='Piri unten';
$userdef[$sortnumber]['semshort']='';
$userdef[$sortnumber]['imagemax']=725;
$userdef[$sortnumber]['imagemay']=52;
$userdef[$sortnumber]['maxcount']=575;
$userdef[$sortnumber]['XcorrectMainText']=25;
$userdef[$sortnumber]['logrotatelines']=500;
##########################
#$sortnumber=3;
#$userdef[$sortnumber]['name']='water';
#$userdef[$sortnumber]['valuefield']=4;
#$userdef[$sortnumber]['gnuplottype']='temperature';
#$userdef[$sortnumber]['logpath']='/var/tmp/water.log';
#$userdef[$sortnumber]['room']='cellar';
#$userdef[$sortnumber]['semlong']='Water';
#$userdef[$sortnumber]['semshort']='C';
#$userdef[$sortnumber]['imagemax']=725;
#$userdef[$sortnumber]['imagemay']=52;
#$userdef[$sortnumber]['maxcount']=575;
#$userdef[$sortnumber]['XcorrectMainText']=25;
#$userdef[$sortnumber]['logrotatelines']=2000;
########################
###### showgnuplot
# Gnuplot will automatically show the pictures.
# There is no reason any more to deactivate Gnuplot. Values: 0/1
$showgnuplot=1;
$gnuplot='/usr/bin/gnuplot'; # location of gnuplot
$pictype='png';
##############################################################################################
## misc
$taillog=1; #make shure to have the correct rights. Values: 0/1
$tailcount=30; #make shure to have the correct rights. Values: 0/1
$tailpath="/usr/bin/tail";
#$taillogorder=$tailpath." -$tailcount $logpath/fhem.log ";
$taillogorder=$tailpath." -$tailcount $logpath/fhem-" . date("Y") . "-" . date("m") . ".log "; #if you have e.g. fhem-2009-02.log
## show Information at STARTUP.
$showLOGS='no'; #show the entrys of the LOGS in the
#fhem.cfg at startup. Default: no Values: yes/no
$showAT='no'; #show the AT_JOBS at startup. Default: yes Values: yes/no
$showNOTI='no'; #show the NOTIFICATIONS at startup. Default: no Values: yes/no
$showHIST='yes'; #show the HISTORY (if taillog=1) at startup. Default: yes Values: yes/no
#$showPICS='no'; #if shwowebcam=1 then initial the Pics will be shown. Default: yes
$showPICS='yes'; #if shwowebcam=1 then initial the Pics will be shown. Default: yes
$showWeath='yes'; # Show weather on startup? $enableweather must 1
$RSStitel='FHEM';
$urlreload=60; # Automatic reloading page [sec]. Default fast: 60 slow:90
$titel="PHP-Webmachine for fhem :-)"; # feel free to create an own title
#$timeformat="Y-m-d H:i:s"; # English
$timeformat="d.m.Y H:i:s"; # German
$winsize=800; # width of the pgm3
#$winsize="100%"; # width of the pgm3
##########################
##### SKINS - change your colors
# Look at http://www.farb-tabelle.de/de/farbtabelle.htm for colors
## DEFAULT
$bodybg="bgcolor='#F5F5F5'";
$bg1="bgcolor='#6E94B7'"; # e.g. Header
$bg2="bgcolor='#AFC6DB'"; # e.g. behind the buttons
$bg4="bgcolor='#6394BD'"; # border around all
$bg5="bgcolor='#FFFFFF'"; # between the tables
$fontcolor1="color='#FFFFFF'";
$fontcolor3="color='#143554'";
# The Button needs decimal Code Instead Hex.
# Use the column left from the HEX.
# You must delete the old graphics after the change. "rm <pgm3>/tmp/*"
$buttonBg_R='175';$buttonBg_G='198';$buttonBg_B='219';
$bg1_R='110';$bg1_G='148';$bg1_B='181';
##########################
##ORANGE
#$bodybg="bgcolor='#FFDAB9'";
#$bg1="bgcolor='#FF8C00'";
#$bg2="bgcolor='#FFA500'";
#$bg4="bgcolor='#6394BD'";
#$bg5="bgcolor='#FFFFFF'";
#$fontcolor1="color='#000000'";
#$fontcolor3="color='#000000'";
# The Button needs decimal Code Instead Hex.
# Use the column left from the HEX on
# http://www.farb-tabelle.de/de/farbtabelle.htm
# You must delete the old graphics after the change. "rm <pgm3>/tmp/*"
#$buttonBg_R='255';$buttonBg_G='165';$buttonBg_B='0';
#Dec-Code from $bg1:
#$bg1_R='255';$bg1_G='140';$bg1_B='0';
##########################
$fontcol_grap_R=20;
$fontcol_grap_G=53;
$fontcol_grap_B=84;
$fontttf="Vera";
$fontttfb="VeraBd"; ##copyright of the fonts: docs/copyright_font
## if there is now graphic try the following:
# $fontttf="Vera.ttf";
# $fontttfb="VeraBd.ttf";
# or absolut:
# $fontttf="/srv/www/htdocs/fhz/include/Vera.ttf";
# $fontttfb="/srv/www/htdocs/fhz/include/VeraBd.ttf";
############################### end of settings
putenv('GDFONTPATH=' . realpath('.'));
### If DB-query is used, this is the only point of connect. ###
if ($DBUse=="1") {
@mysql_connect($DBNode, $DBUser, $DBPass) or die("Can't connect");
@mysql_select_db($DBName) or die("No database found");
}
?>
Reference in New Issue View Git Blame Copy Permalink