fhem-mirror/fhem/contrib/98_PID.pm

##############################################
# $Id: 98_PID.pm 4930 2014-02-15 03:59:16Z betateilchen $
# This module is derived from the contrib/99_PID by Alexander Titzel.

package main;
use strict;
use warnings;

sub PID_sv($$$);
sub PID_setValue($);

##########################
sub
PID_Initialize($)
{
  my ($hash) = @_;
  $hash->{DefFn}   = "PID_Define";
  $hash->{SetFn}   = "PID_Set";
  $hash->{NotifyFn} = "PID_Notify";
  $hash->{AttrList} = "disable:0,1 roundValveValue:0,1";
}


##########################
sub
PID_Define($$$)
{
  my ($pid, $def) = @_;
  my @a = split("[ \t][ \t]*", $def);
  my $pn = $a[0];

  if(@a < 4 || @a > 7) {
    return "wrong syntax: define <name> PID " .
                "<sensor>[:reading:regexp] <actor>[:cmd:min:max] [p i d]";
  }

  ###################
  # Sensor
  my ($sensor, $reading, $regexp) = split(":", $a[2], 3);
  if(!$defs{$sensor}) {
    my $msg = "$pn: Unknown sensor device $sensor specified";
    Log3 $pn, 2, $msg;
    return $msg;
  }
  $pid->{sensor} = $sensor;
  if(!$regexp) {
    my $t = $defs{$sensor}{TYPE};
    if($t eq "HMS" || $t eq "CUL_WS" || $t eq "CUL_HM" ) {
      $reading = "temperature";
      $regexp = '([\\d\\.]*)';
    } else {
      my $msg = "$pn: Unknown sensor type $t, specify regexp";
      Log3 $pn, 2, $msg;
      return $msg;
    }
  }
  $pid->{reading} = $reading;
  $pid->{regexp} = $regexp;


  ###################
  # Actor
  my ($actor, $cmd, $min, $max) = split(":", $a[3], 4);
  my ($p_p, $p_i, $p_d) = (0, 0, 0);
  if(!$defs{$actor}) {
    my $msg = "$pn: Unknown actor device $actor specified";
    Log3 $pn, 2, $msg;
    return $msg;
  }
  $pid->{actor} = $actor;
  if(!$max) {
    my $t = $defs{$actor}{TYPE};
    if($t eq "FHT8V") {
      $cmd = "valve";
      $min = 0;
      $max = 100;
      $p_p = 65.0/2.55;
      $p_i = 7.8/2.55;
      $p_d = 15.0/2.55;
    } else {
      my $msg = "$pn: Unknown actor type $t, specify command:min:max";
      Log3 $pn, 2, $msg;
      return $msg;
    }
  }
  $pid->{command} = $cmd;

  $pid->{pFactor}    = (@a > 4 ? $a[4] : $p_p);
  $pid->{iFactor}    = (@a > 5 ? $a[5] : $p_i);
  $pid->{dFactor}    = (@a > 6 ? $a[6] : $p_d);
  $pid->{satMin}     = $min;
  $pid->{satMax}     = $max;

  PID_sv($pid, 'delta',      0.0);
  PID_sv($pid, 'actuation',  0.0);
  PID_sv($pid, 'integrator', 0.0);
  $pid->{STATE} = 'initialized';

  return undef;
}

##########################
sub
PID_Set($@)
{
  my ($pid, @a) = @_;
  my $pn = $pid->{NAME};

  return "" if($attr{$pn} && $attr{$pn}{disable});
  return "Need a parameter for set" if(@a < 2);
  my $arg = $a[1];

  if($arg eq "factors" ) {
    return "Set factors needs 3 parameters (p i d)" if(@a != 5);
    $pid->{pFactor} = $a[2];
    $pid->{iFactor} = $a[3];
    $pid->{dFactor} = $a[4];
    # modify DEF, alse save won't work.
    my @d = split(' ', $pid->{DEF});
    $pid->{DEF} = "$d[0] $d[1] $a[2] $a[3] $a[4]";

  } elsif ($arg eq "desired" ) {
    return "Set desired needs a numeric parameter"
        if(@a != 3 || $a[2] !~ m/^[\d\.]*$/);
    Log3 $pn, 3, "PID set $pn $arg $a[2]";
    PID_sv($pid, 'desired', $a[2]);
    PID_setValue($pid);

  } else {
    return "Unknown argument $a[1], choose one of factors desired"

  }
  return "";
}

##########################
sub
PID_Notify($$)
{
  my ($pid, $dev) = @_;
  my $pn = $pid->{NAME};

  return "" if($attr{$pn} && $attr{$pn}{disable});

  return if($dev->{NAME} ne $pid->{sensor});

  my $reading = $pid->{reading};
  my $max = int(@{$dev->{CHANGED}});

  for (my $i = 0; $i < $max; $i++) {
    my $s = $dev->{CHANGED}[$i];
    $s = "" if(!defined($s));
    next if($s !~ m/$reading/);
    PID_setValue($pid);
    last;
  }
  return "";
}

##########################
sub
PID_saturate($$)
{
  my ($pid, $v) = @_;
  return $pid->{satMax} if($v > $pid->{satMax});
  return $pid->{satMin} if($v < $pid->{satMin});
  return $v;
}

sub
PID_sv($$$)
{
  my ($pid,$name,$val) = @_;
  $pid->{READINGS}{$name}{VAL} = $val;
  $pid->{READINGS}{$name}{TIME} = TimeNow();
}

sub
PID_gv($$)
{
  my ($pid,$name) = @_;
  return $pid->{READINGS}{$name}{VAL}
    if($pid->{READINGS} && $pid->{READINGS}{$name});
  return undef;
}


sub
PID_setValue($)
{
  my ($pid) = @_;
  my $pn = $pid->{NAME};
  my $sensor = $pid->{sensor};
  my $reading = $pid->{reading};
  my $re = $pid->{regexp};

  # Get the value from the READING
  my $inStr;
  $inStr = $defs{$sensor}{READINGS}{$reading}{VAL}
    if($defs{$sensor}{READINGS} && $defs{$sensor}{READINGS}{$reading});
  if(!$inStr) {
    Log3 $pn, 4, "PID $pn: no $reading yet for $sensor";
    return;
  }
  $inStr =~ m/$re/;
  my $in = $1;
   
  my $desired = PID_gv($pid, 'desired');
  return if(!defined($desired));

  my $delta = $desired - $in;
  my $p = $delta * $pid->{pFactor};

  my $i = PID_saturate($pid, PID_gv($pid,'integrator')+$delta*$pid->{iFactor});
  PID_sv($pid, 'integrator', $i);

  my $d = ($delta - PID_gv($pid,'delta')) * $pid->{dFactor};
  PID_sv($pid, 'delta',  $delta);

  my $a =  PID_saturate($pid, $p + $i + $d);
  PID_sv($pid, 'actuation', $a);

  Log3 $pn, 4, sprintf("PID $pn: p:%.2f i:%.2f d:%.2f", $p, $i, $d);

  # Hack to round.
  my ($satMin, $satMax) = ($pid->{satMin}, $pid->{satMax});
  $a = int($a) if(AttrVal($pn, "roundValveValue", ($satMax-$satMin >= 100)));

  my $ret = fhem sprintf("set %s %s %g", $pid->{actor}, $pid->{command}, $a);
  Log3 $pn, 1, "output of $pn command: $ret" if($ret);
  $pid->{STATE} = "$in (delta $delta)";
}

1;

=pod
not to be translated
=begin html

<a name="PID"></a>
<h3>PID</h3>
<ul>
  The PID device is a loop controller, used to set the value e.g of a heating
  valve dependent of the current and desired temperature.
  <br>
  <br>

  <a name="PIDdefine"></a>
  <b>Define</b>
  <ul>
    <code>define &lt;name&gt; PID sensor[:reading:regexp] actor[:cmd:min:max] [p i d]</code>
    <br><br>

    <code>sensor[:reading:regexp]</code> specifies the sensor, which is an
    already defined fhem device, e.g. a S300TH temperature sensor. The reading
    and regexp fields are necessary only for unknown devices (currently <a
    href="#CUL_WS">CUL_WS</a> and <a href="#HMS">HMS</a> devices are "known").
    Reading specifies the READINGS field of the sensor, and the regexp extracts
    the number from this field. E.g. for the complete definition for a CUL_WS
    device is: <code>s300th_dev:temperature:([\d\.]*)</code>
    <br><br>

    <code>actor[:cmd:min:max]</code> specifies the actor, which is an
    already defined fhem device, e.g. an FHT8V valve. The cmd, min and max
    fields are necessary only for unknown devices (currently <a
    href="#FHT8V">FHT8V</a> is "known"). cmd specifies the command name for the
    actor, min the minimum value and max the maximum value. The complete
    definition for an FHT8V device is:<code>fht8v_dev:valve:0:100</code>
    <br><br>

    p, i and d are the parameters use to controlling, see also the <a
    href="http://de.wikipedia.org/wiki/Regler">this</a> wikipedia entry.
    The default values are around 25.5, 3 and 5.88, you probably need to tune
    these values. They can be also changed later.
    <br><br>

    Examples:
    <ul>
      <code>define wz_pid PID wz_th wz_fht8v</code><br>
    </ul>
  </ul>
  <br>

  <a name="PIDset"></a>
  <b>Set </b>
  <ul>
      <li>set &lt;name&gt; factors p i d<br>
      Set the p, i and d factors, as described above.
      </li>
      <li>set &lt;name&gt; desired &lt;value&gt;<br>
      Set the desired value (e.g. temperature). Note: until this value is not
      set, no command is issued.
      </li>
  </ul>
  <br>

  <a name="PIDget"></a>
  <b>Get </b>
  <ul>
      N/A
  </ul>
  <br>

  <a name="PIDattr"></a>
  <b>Attributes</b>
  <ul>
    <li><a href="#disable">disable</a></li>
    <a name="roundValveValue"></a>
    <li>roundValveValue<br>
        round the valve value to an integer, of the attribute is set to 1.
        The valve value is automatically rounded, if the attribtue is not set,
        and the difference between min and max is greater than 100.
        </li><br>
  </ul>
  <br>
</ul>



=end html
=cut