#
# fhem.pl configfile
# 
# Define an FHT80b device. You have to know its transmitter code,
# or set verbose to 4 and wait for a while watching the log.
#
# wz stands for "wohnzimmer".
# After about 5-10 minutes, check if "list wz" returns something meaningful
#

attr global logfile /tmp/fhem-%Y-%m.log
attr global statefile /tmp/fhem.save    # where to save the state of the devices
attr global verbose 3                   # "normal" verbosity
attr global port 7072                   # our TCP/IP port (localhost only)
attr global modpath /usr/local/lib      # where our FHEM directory is
define FHZ FHZ /dev/tts/USB0 # the serial port of an FHZ 1000 PC

define wz FHT 3232          # type FHT, transmitter code 3232 (default value)

#########################
# Some documentation suggests that the FHZ time should be set every minute.
# I only set it once a day.
define fhz_timer at *03:30:00 set FHZ time

#########################
# If you wish to have up-to date information on certain strange parameters
# then comment out the line below. My devices send a message when a value
# changes, and send measured-temp, actuator and state messages regularly.
# Be patient: the reply comes in 5-10 minutes.
define wz_refresh at *04:00:00 set wz report1 255 report2 255