mirror of
https://github.com/fhem/fhem-mirror.git
synced 2025-03-10 09:16:53 +00:00
00_THZ.pm: p99RoomThermCorrection added + sDisplay + bugfix
git-svn-id: https://svn.fhem.de/fhem/trunk@7820 2b470e98-0d58-463d-a4d8-8e2adae1ed80
This commit is contained in:
immiimmi
parent
b79ff958ff
commit
ee55d622c1
@ -1,8 +1,8 @@
|
||||
##############################################
|
||||
# 00_THZ
|
||||
# $Id$
|
||||
# by immi 01/2015
|
||||
my $thzversion = "0.128";
|
||||
# by immi 02/2015
|
||||
my $thzversion = "0.130";
|
||||
# this code is based on the hard work of Robert; I just tried to port it
|
||||
# http://robert.penz.name/heat-pump-lwz/
|
||||
########################################################################################
|
||||
@ -120,6 +120,7 @@ my %sets439 = (
|
||||
"p55MaxPumpCycles" => {cmd2=>"0A05B7", argMin => "25", argMax => "200", type =>"1clean", unit =>""},
|
||||
"p56OutTempMaxPumpCycles" => {cmd2=>"0A05B9", argMin => "1", argMax => "20", type =>"5temp", unit =>" °C"},
|
||||
"p57OutTempMinPumpCycles" => {cmd2=>"0A05BA", argMin => "1", argMax => "25", type =>"5temp", unit =>" °C"},
|
||||
"p99RoomThermCorrection" => {cmd2=>"0A0109", argMin => "-3", argMax => "3", type =>"4temp", unit =>" K"},
|
||||
"pHolidayBeginDay" => {cmd2=>"0A011B", argMin => "1", argMax => "31", type =>"0clean", unit =>""},
|
||||
"pHolidayBeginMonth" => {cmd2=>"0A011C", argMin => "1", argMax => "12", type =>"0clean", unit =>""},
|
||||
"pHolidayBeginYear" => {cmd2=>"0A011D", argMin => "12", argMax => "20", type =>"0clean", unit =>""},
|
||||
@ -270,6 +271,7 @@ my %getsonly439 = (
|
||||
"sTimedate" => {cmd2=>"FC", type =>"FCtime", unit =>""},
|
||||
"sFirmware" => {cmd2=>"FD", type =>"FDfirm", unit =>""},
|
||||
"sFirmware-Id" => {cmd2=>"FE", type =>"FEfirmId", unit =>""},
|
||||
"sDisplay" => {cmd2=>"0A0176", type =>"0A0176Dis", unit =>""},
|
||||
"sBoostDHWTotal" => {cmd2=>"0A0924", cmd3=>"0A0925", type =>"1clean", unit =>" kWh"},
|
||||
"sBoostHCTotal" => {cmd2=>"0A0928", cmd3=>"0A0929", type =>"1clean", unit =>" kWh"},
|
||||
"sHeatRecoveredDay" => {cmd2=>"0A03AE", cmd3=>"0A03AF", type =>"1clean", unit =>" Wh"},
|
||||
@ -594,6 +596,7 @@ sub THZ_Set($@){
|
||||
when ("7prog") {$arg= time2quaters($arg) *256 + time2quaters($arg1)}
|
||||
when ("6gradient") {$arg=$arg*100}
|
||||
when ("5temp") {$arg=$arg*10}
|
||||
when ("4temp") {$arg=$arg*10*256}
|
||||
when (["2opmode", "0clean"]) {$arg=$arg*256} #doubble shift ;;; conversion done above for opmode
|
||||
when ("1clean") { }
|
||||
default { }
|
||||
@ -739,7 +742,6 @@ sub THZ_Get_Comunication($$) {
|
||||
elsif ($msg eq "15") {Log3 $hash->{NAME}, 3, "$hash->{NAME} NAK!!"; }
|
||||
if ($msg eq "1002" || $msg eq "02") {
|
||||
THZ_Write($hash, "10"); # step3 --> DLE data link escape // ack datatranfer
|
||||
#select(undef,undef,undef,0.010);
|
||||
($err, $msg) = THZ_ReadAnswer($hash); # Expectedanswer3 // read from the heatpump
|
||||
THZ_Write($hash, "10");
|
||||
}
|
||||
@ -765,7 +767,9 @@ sub THZ_ReadAnswer($)
|
||||
my $name = $hash->{NAME};
|
||||
|
||||
Log3 $hash->{NAME}, 5, "$hash->{NAME} start Funktion THZ_ReadAnswer";
|
||||
my $buf = DevIo_SimpleReadWithTimeout($hash, 0.7);
|
||||
###------Windows support
|
||||
select(undef, undef, undef, 0.025) if( $^O =~ /Win/ ); ###delay of 25 ms for windows-OS, because SimpleReadWithTimeout does not wait
|
||||
my $buf = DevIo_SimpleReadWithTimeout($hash, 0.5);
|
||||
if(!defined($buf)) {
|
||||
Log3 $hash->{NAME}, 3, "$hash->{NAME} THZ_ReadAnswer got no answer from DevIo_SimpleRead. Maybe too slow?";
|
||||
return ("InterfaceNotRespondig", "");
|
||||
@ -776,7 +780,9 @@ sub THZ_ReadAnswer($)
|
||||
my $countmax = 80;
|
||||
#$countmax = 80 if (AttrVal($hash->{NAME}, "firmware" , "new") eq "2.06");
|
||||
while (( (length($data) == 1) or (($data =~ m/^01/) and ($data !~ m/1003$/m ))) and ($count <= $countmax))
|
||||
{ my $buf1 = DevIo_SimpleReadWithTimeout($hash, 0.02);
|
||||
{ ###------Windows support
|
||||
select(undef, undef, undef, 0.005) if( $^O =~ /Win/ ); ###delay of 5 ms for windows-OS, because SimpleReadWithTimeout does not wait
|
||||
my $buf1 = DevIo_SimpleReadWithTimeout($hash, 0.02);
|
||||
Log3($hash->{NAME}, 5, "double read $count activated $data");
|
||||
if(defined($buf1)) {
|
||||
$buf = ($buf . $buf1) ;
|
||||
@ -1023,6 +1029,11 @@ my %parsinghash = (
|
||||
[" p43UnschedVent3: ", 16, 4, "hex", 1], [" p44UnschedVent2: ", 20, 4, "hex", 1], [" p45UnschedVent1: ", 24, 4, "hex", 1],
|
||||
[" p46UnschedVent0: ", 28, 4, "hex", 1], [" p75PassiveCooling: ", 32, 2, "hex", 1]
|
||||
],
|
||||
"03pxx206" => [["UpTempLimitDefrostEvaporatorEnd: ", 4, 4, "hex", 10], [" MaxTimeDefrostEvaporator: ", 8, 4, "hex", 1], [" LimitTempCondenserElectBoost: ", 12, 4, "hex", 10],
|
||||
[" LimitTempCondenserDefrostTerm: ", 16, 4, "hex", 10], [" CompressorRestartDelay: ", 20, 2, "hex", 1], [" MainFanSpeed: ", 22, 2, "hex", 1]
|
||||
],
|
||||
"04pxx206" => [["MaxDefrostDurationAAExchenger: ", 4, 2, "hex", 1], [" DefrostStartThreshold: ", 6, 4, "hex", 10], [" VolumeFlowFilterReplacement: ", 10, 4, "hex", 1]
|
||||
],
|
||||
"05pxx206" => [["p13GradientHC1: ", 4, 4, "hex", 10], [" p14LowEndHC1: ", 8, 4, "hex", 10], [" p15RoomInfluenceHC1: ", 12, 2, "hex", 10],
|
||||
[" p16GradientHC2: ", 14, 4, "hex", 10], [" p17LowEndHC2: ", 18, 4, "hex", 10], [" p18RoomInfluenceHC2: ", 22, 2, "hex", 10],
|
||||
[" p19FlowProportionHC1: ", 24, 4, "hex", 10], [" p20FlowProportionHC2: ", 28, 4, "hex", 10], [" MaxSetHeatFlowTempHC1: ", 32, 4, "hex", 10],
|
||||
@ -1042,12 +1053,6 @@ my %parsinghash = (
|
||||
"08pxx206" => [["p80EnableSolar: ", 4, 2, "hex", 1], [" p81DiffTempSolarLoading: ", 6, 4, "hex", 10], [" p82DelayCompStartSolar: ", 10, 2, "hex", 1],
|
||||
[" p84DHWTempSolarMode: ", 12, 4, "hex", 10], [" HystDiffTempSolar: ", 16, 4, "hex", 1], [" CollectLimitTempSolar: ", 20, 4, "hex", 10]
|
||||
],
|
||||
"0Apxx206" => [["p54MinPumpCycles: ", 4, 2, "hex", 1], [" p55MaxPumpCycles: ", 6, 4, "hex", 1], [" p56OutTempMaxPumpCycles: ", 10, 4, "hex", 10],
|
||||
[" p57OutTempMinPumpCycles: ", 14, 4, "hex", 10], [" p58SuppressTempCaptPumpStart: ", 18, 4, "hex", 1]
|
||||
],
|
||||
"10pxx206" => [["p70StartDryHeat: ", 4, 2, "hex", 1], [" p71BaseTemp: ", 6, 4, "hex", 10], [" p72PeakTemp: ", 10, 4, "hex", 10],
|
||||
[" p73TempDuration: ", 14, 4, "hex", 1], [" p74TempIncrease: ", 18, 4, "hex", 10]
|
||||
],
|
||||
"09his" => [["compressorHeating: ", 4, 4, "hex", 1], [" compressorCooling: ", 8, 4, "hex", 1],
|
||||
[" compressorDHW: ", 12, 4, "hex", 1], [" boosterDHW: ", 16, 4, "hex", 1],
|
||||
[" boosterHeating: ", 20, 4, "hex", 1]
|
||||
@ -1056,6 +1061,27 @@ my %parsinghash = (
|
||||
[" heatingHours: ", 12, 4, "hex", 1], [" DHWhours: ", 16, 4, "hex", 1],
|
||||
[" coolingHours: ", 20, 4, "hex", 1]
|
||||
],
|
||||
"0Apxx206" => [["p54MinPumpCycles: ", 4, 2, "hex", 1], [" p55MaxPumpCycles: ", 6, 4, "hex", 1], [" p56OutTempMaxPumpCycles: ", 10, 4, "hex", 10],
|
||||
[" p57OutTempMinPumpCycles: ", 14, 4, "hex", 10], [" p58SuppressTempCaptPumpStart: ", 18, 4, "hex", 1]
|
||||
],
|
||||
"0Bpxx206" => [["pHTG1StartTime: ", 4, 4, "hex2time", 1], [" pHTG1EndTime: ", 8, 4, "hex2time", 1], [" pHTG1Weekdays: ", 12, 2, "hex2wday", 1],
|
||||
[" pHTG1Enable: ", 14, 2, "hex", 1], [" pHTG2StartTime: ", 16, 4, "hex2time", 1], [" pHTG2EndTime: ", 20, 4, "hex2time", 1],
|
||||
[" pHTG2Weekdays: ", 24, 2, "hex2wday", 1], [" pHTG2Enable: ", 26, 2, "hex", 1]
|
||||
],
|
||||
"0Cpxx206" => [["pDHWStartTime: ", 4, 4, "hex2time", 1], [" pDHWEndTime: ", 8, 4, "hex2time", 1], [" pDHWWeekdays: ", 12, 2, "hex2wday", 1],
|
||||
[" pDHWEnable: ", 14, 2, "hex", 1],
|
||||
],
|
||||
"0Dpxx206" => [["pFAN1StartTime: ", 4, 4, "hex2time", 1], [" pFAN1EndTime: ", 8, 4, "hex2time", 1], [" pFAN1Weekdays: ", 12, 2, "hex2wday", 1],
|
||||
[" pFAN1Enable: ", 14, 2, "hex", 1], [" pFAN2StartTime: ", 16, 4, "hex2time", 1], [" pFAN2EndTime: ", 20, 4, "hex2time", 1],
|
||||
[" pFAN2Weekdays: ", 24, 2, "hex2wday", 1], [" pFAN2Enable: ", 26, 2, "hex", 1]
|
||||
],
|
||||
"0Epxx206" => [["p59RestartBeforeSetbackEnd: ", 4, 4, "hex", 1]
|
||||
],
|
||||
"0Fpxx206" => [["pA0DurationUntilAbsenceStart: ", 4, 4, "hex", 10], [" pA0AbsenceDuration: ", 8, 4, "hex", 10], [" pA0EnableAbsenceProg: ", 12, 2, "hex", 1]
|
||||
],
|
||||
"10pxx206" => [["p70StartDryHeat: ", 4, 2, "hex", 1], [" p71BaseTemp: ", 6, 4, "hex", 10], [" p72PeakTemp: ", 10, 4, "hex", 10],
|
||||
[" p73TempDuration: ", 14, 4, "hex", 1], [" p74TempIncrease: ", 18, 4, "hex", 10]
|
||||
],
|
||||
"16sol" => [["collector_temp: ", 4, 4, "hex2int", 10], [" dhw_temp: ", 8, 4, "hex2int", 10],
|
||||
[" flow_temp: ", 12, 4, "hex2int", 10], [" ed_sol_pump_temp: ", 16, 4, "hex2int", 10],
|
||||
[" x20: ", 20, 4, "hex2int", 1], [" x24: ", 24, 4, "hex2int", 1],
|
||||
@ -1084,7 +1110,7 @@ my %parsinghash = (
|
||||
[" dhw_set_temp: ", 12, 4, "hex2int", 10], [" comp_block_time: ", 16, 4, "hex2int", 1],
|
||||
[" x20: ", 20, 4, "hex2int", 1], [" heat_block_time: ", 24, 4, "hex2int", 1],
|
||||
[" BoosterStage: ", 28, 2, "hex", 1], [" x30: ", 30, 4, "hex", 1],
|
||||
[" OpMode: ", 34, 2, "opmodehc", 1], [" x36: ", 36, 4, "hex", 1]
|
||||
[" opMode: ", 34, 2, "opmodehc", 1], [" x36: ", 36, 4, "hex", 1]
|
||||
],
|
||||
"F4hc1" => [["outsideTemp: ", 4, 4, "hex2int", 10], [" x08: ", 8, 4, "hex2int", 10],
|
||||
[" returnTemp: ", 12, 4, "hex2int", 10], [" integralHeat: ", 16, 4, "hex2int", 1],
|
||||
@ -1093,7 +1119,10 @@ my %parsinghash = (
|
||||
[" seasonMode: ", 38, 2, "somwinmode", 1],#[" x40: ", 40, 4, "hex2int", 1],
|
||||
[" integralSwitch: ", 44, 4, "hex2int", 1], [" opMode: ", 48, 2, "opmodehc", 1],
|
||||
#[" x52: ", 52, 4, "hex2int", 1],
|
||||
[" roomSetTemp: ", 56, 4, "hex2int", 10]
|
||||
[" roomSetTemp: ", 56, 4, "hex2int", 10], [" x60: ", 60, 4, "hex2int", 10],
|
||||
[" x64: ", 64, 4, "hex2int", 10], [" insideTempRC: ", 68, 4, "hex2int", 10],
|
||||
[" x72: ", 72, 4, "hex2int", 10], [" x76: ", 76, 4, "hex2int", 10],
|
||||
# [" x80: ", 80, 4, "hex2int", 10]
|
||||
],
|
||||
"F5hc2" => [["outsideTemp: ", 4, 4, "hex2int", 10], [" returnTemp: ", 8, 4, "hex2int", 10],
|
||||
[" vorlaufTemp: ", 12, 4, "hex2int", 10], [" heatSetTemp: ", 16, 4, "hex2int", 10],
|
||||
@ -1156,15 +1185,24 @@ my %parsinghash = (
|
||||
],
|
||||
"FDfirm" => [["version: ", 4, 4, "hex", 100]
|
||||
],
|
||||
"FEfirmId" => [["Date: ", 36, 22, "hex2ascii", 1]
|
||||
"FEfirmId" => [[" HW: ", 30, 2, "hex", 1], [" SW: ", 32, 4, "swver", 1],
|
||||
[" Date: ", 36, 22, "hex2ascii", 1]
|
||||
],
|
||||
"0A0176Dis" => [[" switchingProg: ", 11, 1, "bit0", 1], [" compressor: ", 11, 1, "bit1", 1],
|
||||
[" heatingHC: ", 11, 1, "bit2", 1], [" heatingDHW: ", 10, 1, "bit0", 1],
|
||||
[" boosterHC: ", 10, 1, "bit1", 1], [" filterBoth: ", 9, 1, "bit0", 1],
|
||||
[" ventStage: ", 9, 1, "bit1", 1], [" pumpHC: ", 9, 1, "bit2", 1],
|
||||
[" defrost: ", 9, 1, "bit3", 1], [" filterUp: ", 8, 1, "bit0", 1],
|
||||
[" filterDown: ", 8, 1, "bit1", 1]
|
||||
],
|
||||
# 68FE03B1839100010003310E0006674A02084D6172202039203230313120
|
||||
"0clean" => [["", 8, 2, "hex", 1]
|
||||
],
|
||||
"1clean" => [["", 8, 4, "hex", 1]
|
||||
],
|
||||
"2opmode" => [["", 8, 2, "opmode", 1]
|
||||
],
|
||||
"4temp" => [["", 8, 4, "hex2int",2560]
|
||||
],
|
||||
"5temp" => [["", 8, 4, "hex2int",10]
|
||||
],
|
||||
"6gradient" => [["", 8, 4, "hex", 100]
|
||||
@ -1178,7 +1216,6 @@ my %parsinghash = (
|
||||
);
|
||||
|
||||
my ($hash,$message) = @_;
|
||||
#$message= "eaFBfda8001601440108024901e6fda8fda8001c01176008110000000002bc000000000014001900000000014c05304600d58f3fd47ae207c500b1012a000001060144fff4ffde012300000000";
|
||||
Log3 $hash->{NAME}, 5, "Parse message: $message";
|
||||
my $length = length($message);
|
||||
Log3 $hash->{NAME}, 5, "Message length: $length";
|
||||
@ -1224,13 +1261,17 @@ my %parsinghash = (
|
||||
when ("hex2int") {$value= hex2int($value);}
|
||||
when ("turnhexdate") {$value= hex(substr($value, 2,2) . substr($value, 0,2));}
|
||||
when ("hexdate") {$value= hex(substr($value, 0,2) . substr($value, 2,2));}
|
||||
when ("turnhex2time") {$value= sprintf(join(':', split("\\.", hex(substr($value, 2,2) . substr($value, 0,2))/100))) ;}
|
||||
when ("hex2time") {$value= sprintf(join(':', split("\\.", hex(substr($value, 0,2) . substr($value, 2,2))/100))) ;}
|
||||
#when ("turnhex2time") {$value= sprintf(join(':', split("\\.", hex(substr($value, 2,2) . substr($value, 0,2))/100))) ;}
|
||||
#when ("hex2time") {$value= sprintf(join(':', split("\\.", hex(substr($value, 0,2) . substr($value, 2,2))/100))) ;}
|
||||
when ("turnhex2time") {$value= sprintf("%02u:%02u", hex($value)%100, hex($value)/100) ;}
|
||||
when ("hex2time") {$value= sprintf("%02u:%02u", hex($value)/100, hex($value)%100) ;}
|
||||
when ("swver") {$value= sprintf("%01u.%02u", hex(substr($value, 0,2)), hex(substr($value, 2,2)));}
|
||||
when ("hex2ascii") {$value= uc(pack('H*', $value));}
|
||||
when ("opmode") {$value= $OpMode{hex($value)};}
|
||||
when ("opmodehc") {$value= $OpModeHC{hex($value)};}
|
||||
when ("esp_mant") {$value= sprintf("%.3f", unpack('f', pack( 'L', reverse(hex($value)))));}
|
||||
when ("somwinmode") {$value= $SomWinMode{($value)};}
|
||||
when ("hex2wday") {$value= unpack('b7', pack('H*',$value));};
|
||||
when ("weekday") {$value= $weekday{($value)};}
|
||||
when ("faultmap") {$value= $faultmap{(hex($value))};}
|
||||
when ("quater") {$value= quaters2time($value);}
|
||||
@ -1262,7 +1303,7 @@ sub THZ_debugread($){
|
||||
my ($err, $msg) =("", " ");
|
||||
# my @numbers=('01', '09', '16', 'D1', 'D2', 'E8', 'E9', 'F2', 'F3', 'F4', 'F5', 'F6', 'FB', 'FC', 'FD', 'FE');
|
||||
#my @numbers=('0A0597','0A0598', '0A0599', '0A059A', '0A059B', '0A059C',);
|
||||
#my @numbers=('0A033B', '0A064F', 'FB', 'FE', '00', '0A05D1', '0A010D');
|
||||
#my @numbers=('0A0176', '0A0109', 'FB', 'FE', '00', '0A05D1', '0A010D');
|
||||
my @numbers = (1..256);
|
||||
#my @numbers = (1..65535);
|
||||
#my @numbers = (1..3179);
|
||||
@ -1280,16 +1321,16 @@ sub THZ_debugread($){
|
||||
($err, $msg) = THZ_ReadAnswer($hash);
|
||||
# send request
|
||||
THZ_Write($hash, $cmdHex2);
|
||||
select(undef, undef, undef, 0.02);
|
||||
($err, $msg) = THZ_ReadAnswer($hash);
|
||||
#expected 1002; if not following if takes care
|
||||
if ($msg eq "10") {
|
||||
select(undef, undef, undef, 0.02);
|
||||
select(undef, undef, undef, 0.01);
|
||||
($err, $msg) = THZ_ReadAnswer($hash);
|
||||
}
|
||||
# ack datatranfer and read from the heatpump
|
||||
select(undef, undef, undef, 0.015);
|
||||
THZ_Write($hash, "10");
|
||||
select(undef, undef, undef, 0.02);
|
||||
select(undef, undef, undef, 0.001);
|
||||
($err, $msg) = THZ_ReadAnswer($hash);
|
||||
THZ_Write($hash, "10");
|
||||
|
||||
@ -1302,9 +1343,9 @@ sub THZ_debugread($){
|
||||
open (MYFILE, '>>data.txt');
|
||||
print MYFILE ($cmd . "-" . $msg . "\n");
|
||||
close (MYFILE);
|
||||
Log3 $hash->{NAME}, 3, "$cmd - $msg";
|
||||
#Log3 $hash->{NAME}, 3, "$cmd - $msg";
|
||||
}
|
||||
select(undef, undef, undef, 1); #equivalent to sleep 1000ms
|
||||
select(undef, undef, undef, 1.255);
|
||||
}
|
||||
}
|
||||
|
||||
@ -1481,16 +1522,17 @@ my $heatSetTemp =(split ' ',ReadingsVal("Mythz","sHC1",17))[11];
|
||||
my $p15RoomInfluenceHC1 = (split ' ',ReadingsVal("Mythz","p15RoomInfluenceHC1",0))[0];
|
||||
my $outside_tempFiltered =(split ' ',ReadingsVal("Mythz","sGlobal",0))[65];
|
||||
my $p14LowEndHC1 =(split ' ',ReadingsVal("Mythz","p14LowEndHC1",0))[0];
|
||||
my $p99RoomThermCorrection =(split ' ',ReadingsVal("Mythz","p99RoomThermCorrection",0))[0];
|
||||
|
||||
|
||||
############willi data
|
||||
#$insideTemp=24.6;
|
||||
#$roomSetTemp = 21;
|
||||
#$p13GradientHC1 = 0.26;
|
||||
#$heatSetTemp = 21.3;
|
||||
#$p15RoomInfluenceHC1 = 50;
|
||||
#$outside_tempFiltered = 13.1;
|
||||
############rene data
|
||||
#$insideTemp=23.8 ;
|
||||
#$roomSetTemp = 20.5;
|
||||
#$p13GradientHC1 = 0.31;
|
||||
#$heatSetTemp = 25.4;
|
||||
#$p15RoomInfluenceHC1 = 80;
|
||||
#$outside_tempFiltered = 4.9;
|
||||
#$p14LowEndHC1 =1.5;
|
||||
#$p99RoomThermCorrection = -2.8;
|
||||
|
||||
|
||||
|
||||
@ -1505,6 +1547,7 @@ $ret .= $outside_tempFiltered . ' heatSetTemp=' . $heatSetTemp . '</text>';
|
||||
|
||||
#title ######################
|
||||
$ret .= '<text id="svg_title" x="400" y="14.4" class="title" text-anchor="middle">';
|
||||
$insideTemp += $p99RoomThermCorrection if ($insideTemp ne "n.a.");
|
||||
$ret .= 'roomSetTemp=' . $roomSetTemp . ' p13GradientHC1=' . $p13GradientHC1 . ' p14LowEndHC1=' . $p14LowEndHC1 . ' p15RoomInfluenceHC1=' . $p15RoomInfluenceHC1 . " insideTemp=" . $insideTemp .' </text>';
|
||||
|
||||
#equation####################
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user