mirror of
https://github.com/fhem/fhem-mirror.git
synced 2025-04-24 15:19:21 +00:00
THZ: new readings
git-svn-id: https://svn.fhem.de/fhem/trunk@5610 2b470e98-0d58-463d-a4d8-8e2adae1ed80
This commit is contained in:
immiimmi
parent
651e4034b9
commit
b03d467e10
@ -1,7 +1,7 @@
|
||||
##############################################
|
||||
# 00_THZ
|
||||
# by immi 04/2014
|
||||
# v. 0.085
|
||||
# v. 0.089
|
||||
# this code is based on the hard work of Robert; I just tried to port it
|
||||
# http://robert.penz.name/heat-pump-lwz/
|
||||
# http://heatpumpmonitor.penz.name/heatpumpmonitorwiki/
|
||||
@ -54,20 +54,31 @@ sub THZ_Refresh_all_gets($);
|
||||
|
||||
########################################################################################
|
||||
#
|
||||
# %sets - all supported protocols are listed
|
||||
# %sets - all supported protocols are listed 59E
|
||||
#
|
||||
########################################################################################
|
||||
|
||||
my %sets = (
|
||||
"OperatingMode" => {cmd2=>"0A0112" }, # 1 Standby bereitschaft; 11 in Automatic; 3 DAYmode; SetbackMode; DHWmode; Manual; Emergency
|
||||
"pOpMode" => {cmd2=>"0A0112" }, # 1 Standby bereitschaft; 11 in Automatic; 3 DAYmode; SetbackMode; DHWmode; Manual; Emergency
|
||||
"p01RoomTempDayHC1" => {cmd2=>"0B0005", argMin => "13", argMax => "28" },
|
||||
"p02RoomTempNightHC1" => {cmd2=>"0B0008", argMin => "13", argMax => "28" },
|
||||
"p03RoomTempStandbyHC1" => {cmd2=>"0B013D", argMin => "13", argMax => "28" },
|
||||
"p13GradientHC1" => {cmd2=>"0B010E", argMin => "0", argMax => "5" }, # 0..5 rappresentato/100
|
||||
"p14LowEnDHC1" => {cmd2=>"0B059E", argMin => "0", argMax => "20" }, #in °K 0..20°K rappresentato/10
|
||||
"p15RoomInfluenceHC1" => {cmd2=>"0B010F", argMin => "0", argMax => "10" }, # 0..10 rappresentato/10
|
||||
"p19FlowProportionHC1" => {cmd2=>"0B059D", argMin => "0", argMax => "100" }, #in % 0..100%
|
||||
|
||||
"p01RoomTempDayHC2" => {cmd2=>"0C0005", argMin => "13", argMax => "28" },
|
||||
"p02RoomTempNightHC2" => {cmd2=>"0C0008", argMin => "13", argMax => "28" },
|
||||
"p03RoomTempStandbyHC2" => {cmd2=>"0C013D", argMin => "13", argMax => "28" },
|
||||
"p04DHWsetDay" => {cmd2=>"0A0013", argMin => "13", argMax => "47" },
|
||||
"p05DHWsetNight" => {cmd2=>"0A05BF", argMin => "13", argMax => "47" },
|
||||
"p16GradientHC2" => {cmd2=>"0C010E", argMin => "0", argMax => "5" }, # /100
|
||||
"p17LowEndHC2" => {cmd2=>"0C059E", argMin => "0", argMax => "20" },
|
||||
"p18RoomInfluenceHC2" => {cmd2=>"0C010F", argMin => "0", argMax => "10" }, #in °C 0..10°C rappresentato/10
|
||||
|
||||
"p04DHWsetDay" => {cmd2=>"0A0013", argMin => "13", argMax => "48" },
|
||||
"p05DHWsetNight" => {cmd2=>"0A05BF", argMin => "13", argMax => "48" },
|
||||
"p06DHWsetStandby" => {cmd2=>"0A0581", argMin => "13", argMax => "48" },
|
||||
"p11DHWsetManual" => {cmd2=>"0A0580", argMin => "13", argMax => "54" },
|
||||
"p07FanStageDay" => {cmd2=>"0A056C", argMin => "0", argMax => "3" },
|
||||
"p08FanStageNight" => {cmd2=>"0A056D", argMin => "0", argMax => "3" },
|
||||
"p09FanStageStandby" => {cmd2=>"0A056F", argMin => "0", argMax => "3" },
|
||||
@ -75,22 +86,26 @@ my %sets = (
|
||||
"p75passiveCooling" => {cmd2=>"0A0575", argMin => "0", argMax => "2" },
|
||||
"p33BoosterTimeoutDHW" => {cmd2=>"0A0588", argMin => "0", argMax => "200" }, #during DHW heating
|
||||
"p79BoosterTimeoutHC" => {cmd2=>"0A05A0", argMin => "0", argMax => "60" }, #delayed enabling of booster heater
|
||||
"p37fanstage1-Airflow-inlet" => {cmd2=>"0A0576", argMin => "50", argMax => "300"}, #zuluft
|
||||
"p38fanstage2-Airflow-inlet" => {cmd2=>"0A0577", argMin => "50", argMax => "300" }, #zuluft
|
||||
"p39fanstage3-Airflow-inlet" => {cmd2=>"0A0578", argMin => "50", argMax => "300" }, #zuluft
|
||||
"p40fanstage1-Airflow-outlet" => {cmd2=>"0A0579", argMin => "50", argMax => "300" }, #abluft extrated
|
||||
"p41fanstage2-Airflow-outlet" => {cmd2=>"0A057A", argMin => "50", argMax => "300" }, #abluft extrated
|
||||
"p42fanstage3-Airflow-outlet" => {cmd2=>"0A057B", argMin => "50", argMax => "300" }, #abluft extrated
|
||||
"p46UnschedVent0" => {cmd2=>"0A0571", argMin => "0", argMax => "900"}, #in min
|
||||
"p45UnschedVent1" => {cmd2=>"0A0572", argMin => "0", argMax => "900"}, #in min
|
||||
"p44UnschedVent2" => {cmd2=>"0A0573", argMin => "0", argMax => "900"}, #in min
|
||||
"p43UnschedVent3" => {cmd2=>"0A0574", argMin => "0", argMax => "900"}, #in min
|
||||
"p37Fanstage1AirflowInlet" => {cmd2=>"0A0576", argMin => "50", argMax => "300"}, #zuluft
|
||||
"p38Fanstage2AirflowInlet" => {cmd2=>"0A0577", argMin => "50", argMax => "300" }, #zuluft
|
||||
"p39Fanstage3AirflowInlet" => {cmd2=>"0A0578", argMin => "50", argMax => "300" }, #zuluft
|
||||
"p40Fanstage1AirflowOutlet" => {cmd2=>"0A0579", argMin => "50", argMax => "300" }, #abluft extrated
|
||||
"p41Fanstage2AirflowOutlet" => {cmd2=>"0A057A", argMin => "50", argMax => "300" }, #abluft extrated
|
||||
"p42Fanstage3AirflowOutlet" => {cmd2=>"0A057B", argMin => "50", argMax => "300" }, #abluft extrated
|
||||
"p49SummerModeTemp" => {cmd2=>"0A0116", argMin => "11", argMax => "24" }, #threshold for summer mode !!
|
||||
"p50SummerModeHysteresis" => {cmd2=>"0A05A2", argMin => "0.5", argMax => "5" }, #Hysteresis for summer mode !!
|
||||
"holidayBegin_day" => {cmd2=>"0A011B", argMin => "1", argMax => "31" },
|
||||
"holidayBegin_month" => {cmd2=>"0A011C", argMin => "1", argMax => "12" },
|
||||
"holidayBegin_year" => {cmd2=>"0A011D", argMin => "12", argMax => "20" },
|
||||
"holidayBegin-time" => {cmd2=>"0A05D3", argMin => "00:00", argMax => "23:59"},
|
||||
"holidayEnd_day" => {cmd2=>"0A011E", argMin => "1", argMax => "31" },
|
||||
"holidayEnd_month" => {cmd2=>"0A011F", argMin => "1", argMax => "12" },
|
||||
"holidayEnd_year" => {cmd2=>"0A0120", argMin => "12", argMax => "20" },
|
||||
"holidayEnd-time" => {cmd2=>"0A05D4", argMin => "00:00", argMax => "23:59"}, # the answer look like 0A05D4-0D0A05D40029 for year 41 which is 10:15
|
||||
"pHolidayBeginDay" => {cmd2=>"0A011B", argMin => "1", argMax => "31" },
|
||||
"pHolidayBeginMonth" => {cmd2=>"0A011C", argMin => "1", argMax => "12" },
|
||||
"pHolidayBeginYear" => {cmd2=>"0A011D", argMin => "12", argMax => "20" },
|
||||
"pHolidayBeginTime" => {cmd2=>"0A05D3", argMin => "00:00", argMax => "23:59"},
|
||||
"pHolidayEndDay" => {cmd2=>"0A011E", argMin => "1", argMax => "31" },
|
||||
"pHolidayEndMonth" => {cmd2=>"0A011F", argMin => "1", argMax => "12" },
|
||||
"pHolidayEndYear" => {cmd2=>"0A0120", argMin => "12", argMax => "20" },
|
||||
"pHolidayEndTime" => {cmd2=>"0A05D4", argMin => "00:00", argMax => "23:59"}, # the answer look like 0A05D4-0D0A05D40029 for year 41 which is 10:15
|
||||
#"party-time" => {cmd2=>"0A05D1", argMin => "00:00", argMax => "23:59"}, # value 1Ch 28dec is 7 ; value 1Eh 30dec is 7:30
|
||||
"programHC1_Mo_0" => {cmd2=>"0B1410", argMin => "00:00", argMax => "23:59"}, #1 is monday 0 is first prog; start and end; value 1Ch 28dec is 7 ; value 1Eh 30dec is 7:30
|
||||
"programHC1_Mo_1" => {cmd2=>"0B1411", argMin => "00:00", argMax => "23:59"},
|
||||
@ -226,23 +241,24 @@ my %sets = (
|
||||
my %getsonly = (
|
||||
# "hallo" => { },
|
||||
# "debug_read_raw_register_slow" => { },
|
||||
"Status_Sol_16" => {cmd2=>"16"},
|
||||
"Status_DHW_F3" => {cmd2=>"F3"},
|
||||
"Status_HC1_F4" => {cmd2=>"F4"},
|
||||
"Status_HC2_F5" => {cmd2=>"F5"},
|
||||
"history" => {cmd2=>"09"},
|
||||
"last10errors" => {cmd2=>"D1"},
|
||||
"allFB" => {cmd2=>"FB"},
|
||||
"timedate" => {cmd2=>"FC"},
|
||||
"firmware" => {cmd2=>"FD"},
|
||||
"sSol" => {cmd2=>"16"},
|
||||
"sDHW" => {cmd2=>"F3"},
|
||||
"sHC1" => {cmd2=>"F4"},
|
||||
"sHC2" => {cmd2=>"F5"},
|
||||
"sHistory" => {cmd2=>"09"},
|
||||
"sLast10errors" => {cmd2=>"D1"},
|
||||
"sGlobal" => {cmd2=>"FB"}, #allFB
|
||||
"sTimedate" => {cmd2=>"FC"},
|
||||
"sFirmware" => {cmd2=>"FD"},
|
||||
"party-time" => {cmd2=>"0A05D1"} # value 1Ch 28dec is 7 ; value 1Eh 30dec is 7:30
|
||||
);
|
||||
|
||||
my %gets=(%getsonly, %sets);
|
||||
|
||||
my %OpMode = ("1" =>"Standby", "11" => "Automatic", "3" =>"DAYmode", "4" =>"SetBack", "5" =>"DHWmode", "14" =>"Manual", "0" =>"Emergency");
|
||||
my %OpMode = ("1" =>"standby", "11" => "automatic", "3" =>"DAYmode", "4" =>"setback", "5" =>"DHWmode", "14" =>"manual", "0" =>"emergency");
|
||||
my %Rev_OpMode = reverse %OpMode;
|
||||
|
||||
my %OpModeHC = ("1" =>"normal", "2" => "setback", "3" =>"standby", "4" =>"restart", "5" =>"restart");
|
||||
my %SomWinMode = ( "01" =>"winter", "02" => "summer");
|
||||
########################################################################################
|
||||
#
|
||||
# THZ_Initialize($)
|
||||
@ -266,14 +282,15 @@ sub THZ_Initialize($)
|
||||
$hash->{UndefFn} = "THZ_Undef";
|
||||
$hash->{GetFn} = "THZ_Get";
|
||||
$hash->{SetFn} = "THZ_Set";
|
||||
$hash->{AttrFn} = "THZ_Attr";
|
||||
$hash->{AttrList}= "IODev do_not_notify:1,0 ignore:0,1 dummy:1,0 showtime:1,0 loglevel:0,1,2,3,4,5,6 "
|
||||
."interval_allFB:0,60,120,180,300,600,3600,7200,43200,86400 "
|
||||
."interval_Status_Sol_16:0,60,120,180,300,600,3600,7200,43200,86400 "
|
||||
."interval_Status_DHW_F3:0,60,120,180,300,600,3600,7200,43200,86400 "
|
||||
."interval_Status_HC1_F4:0,60,120,180,300,600,3600,7200,43200,86400 "
|
||||
."interval_Status_HC2_F5:0,60,120,180,300,600,3600,7200,43200,86400 "
|
||||
."interval_history:0,3600,7200,28800,43200,86400 "
|
||||
."interval_last10errors:0,3600,7200,28800,43200,86400 "
|
||||
."interval_sGlobal:0,60,120,180,300,600,3600,7200,43200,86400 "
|
||||
."interval_sSol:0,60,120,180,300,600,3600,7200,43200,86400 "
|
||||
."interval_sDHW:0,60,120,180,300,600,3600,7200,43200,86400 "
|
||||
."interval_sHC1:0,60,120,180,300,600,3600,7200,43200,86400 "
|
||||
."interval_sHC2:0,60,120,180,300,600,3600,7200,43200,86400 "
|
||||
."interval_sHistory:0,3600,7200,28800,43200,86400 "
|
||||
."interval_sLast10errors:0,3600,7200,28800,43200,86400 "
|
||||
. $readingFnAttributes;
|
||||
}
|
||||
|
||||
@ -407,12 +424,10 @@ sub THZ_Ready($)
|
||||
{
|
||||
my ($hash) = @_;
|
||||
if($hash->{STATE} eq "disconnected")
|
||||
{
|
||||
{ RemoveInternalTimer($hash);
|
||||
select(undef, undef, undef, 0.1); #equivalent to sleep 100ms
|
||||
return DevIo_OpenDev($hash, 1, "THZ_Refresh_all_gets")
|
||||
}
|
||||
|
||||
|
||||
# This is relevant for windows/USB only
|
||||
my $po = $hash->{USBDev};
|
||||
if($po) {
|
||||
@ -468,13 +483,15 @@ sub THZ_Set($@){
|
||||
}
|
||||
|
||||
if ((substr($cmdHex2,0,6) eq "0A0116") or (substr($cmdHex2,0,6) eq "0A05A2")) {$arg=$arg*10} #summermode
|
||||
elsif (substr($cmdHex2,0,4) eq "0A01") {$arg=$arg*256} # shift 2 times -- the answer look like 0A0120-3A0A01200E00 for year 14
|
||||
elsif (substr($cmdHex2,0,4) eq "0A01") {$arg=$arg*256} # shift 2 times -- the answer look like 0A0120-3A0A01200E00 for year 14
|
||||
elsif ((substr($cmdHex2,2,2) eq "1D") or (substr($cmdHex2,2,2) eq "17") or (substr($cmdHex2,2,2) eq "15") or (substr($cmdHex2,2,2) eq "14")) {$arg= time2quaters($arg) *256 + time2quaters($arg1)} # BeginTime-endtime, in the register is represented begintime endtime
|
||||
elsif (substr($cmdHex2,0,6) eq "0A05D1") {$arg= time2quaters($arg1) *256 + time2quaters($arg)} # PartyBeginTime-endtime, in the register is represented endtime begintime
|
||||
#partytime (0A05D1) non funziona;
|
||||
elsif ((substr($cmdHex2,0,6) eq "0A05D3") or (substr($cmdHex2,0,6) eq "0A05D4")) {$arg= time2quaters($arg)} # holidayBeginTime-endtime
|
||||
elsif ((substr($cmdHex2,0,5) eq "0A056") or (substr($cmdHex2,0,5) eq "0A057") or (substr($cmdHex2,0,6) eq "0A0588") or (substr($cmdHex2,0,6) eq "0A05A0")) { } # fann speed and boostetimeout: do not multiply
|
||||
else {$arg=$arg*10}
|
||||
elsif ((substr($cmdHex2,0,5) eq "0A056") or (substr($cmdHex2,0,5) eq "0A057") or (substr($cmdHex2,0,6) eq "0A0588") or (substr($cmdHex2,0,6) eq "0A05A0") or (substr($cmdHex2,0,6) eq "0B059D")) { } # fann speed and boostetimeout: do not multiply
|
||||
elsif (substr($cmdHex2,2,4) eq "010E") {$arg=$arg*100} #gradientHC1 &HC2
|
||||
elsif (substr($cmdHex2,2,4) eq "010F") {$arg=$arg*256*10} #gradientHC1 &HC2
|
||||
else {$arg=$arg*10}
|
||||
|
||||
THZ_Write($hash, "02"); # STX start of text
|
||||
($err, $msg) = THZ_ReadAnswer($hash); #Expectedanswer1 is "10" DLE data link escape
|
||||
@ -482,6 +499,7 @@ sub THZ_Set($@){
|
||||
if ($msg eq "10") {
|
||||
$cmdHex2=THZ_encodecommand(($cmdHex2 . sprintf("%04X", $arg)),"set");
|
||||
THZ_Write($hash, $cmdHex2); # send request SOH start of heading -- Null -- ?? -- DLE data link escape -- EOT End of Text
|
||||
select(undef, undef, undef, 0.1); #maybe important for older firmware
|
||||
($err, $msg) = THZ_ReadAnswer($hash); #Expectedanswer is "10", DLE data link escape
|
||||
}
|
||||
$msgtmp= $msgtmp ."\n" ."set--" . $cmdHex2 ."\n" . $msg;
|
||||
@ -785,17 +803,24 @@ sub THZ_Parse($) {
|
||||
elsif (substr($message,4,4) eq "05D1") {$message = quaters2time(substr($message, 10,2)) ."--". quaters2time(substr($message, 8,2))} #like above but before stop then start !!!!
|
||||
elsif ((substr($message,4,4) eq "05D3") or (substr($message,4,4) eq "05D4")) {$message = quaters2time(substr($message, 10,2)) } #value 1Ch 28dec is 7
|
||||
elsif ((substr($message,4,3) eq "056") or (substr($message,4,4) eq "0570") or (substr($message,4,4) eq "0575")) {$message = hex(substr($message, 8,4))}
|
||||
elsif ((substr($message,4,4) eq "0588") or (substr($message,4,4) eq "05A0") or (substr($message,4,4) eq "0571") or (substr($message,4,4) eq "0572") or (substr($message,4,4) eq "0573") or (substr($message,4,4) eq "0574")) {$message = hex(substr($message, 8,4)) ." min" }
|
||||
elsif (substr($message,4,3) eq "057") {$message = hex(substr($message, 8,4)) ." m3/h" }
|
||||
elsif (substr($message,4,4) eq "05A2") {$message = hex(substr($message, 8,4))/10 ." K" }
|
||||
elsif ((substr($message,4,4) eq "0588") or (substr($message,4,4) eq "05A0")) {$message = hex(substr($message, 8,4)) ." min" }
|
||||
else {$message = hex2int(substr($message, 8,4))/10 ." °C" }
|
||||
}
|
||||
when ("0B") { #set parameter HC1
|
||||
if (substr($message,4,2) eq "14") {$message = quaters2time(substr($message, 8,2)) ."--". quaters2time(substr($message, 10,2))} #value 1Ch 28dec is 7 ; value 1Eh 30dec is 7:30
|
||||
elsif (substr($message,4,4) eq "059E") {$message = hex(substr($message, 8,4)) ." K" }
|
||||
elsif (substr($message,4,4) eq "059D") {$message = hex(substr($message, 8,4)) ." %" }
|
||||
elsif (substr($message,4,4) eq "010E") {$message = hex(substr($message, 8,4))/100}
|
||||
elsif (substr($message,4,4) eq "010F") {$message = hex(substr($message, 8,2))/10 . " °C"}
|
||||
else {$message = hex2int(substr($message, 8,4))/10 ." °C" }
|
||||
}
|
||||
when ("0C") { #set parameter HC2
|
||||
if (substr($message,4,2) eq "15") {$message = quaters2time(substr($message, 8,2)) ."--". quaters2time(substr($message, 10,2))} #value 1Ch 28dec is 7 ; value 1Eh 30dec is 7:30
|
||||
elsif (substr($message,4,4) eq "059E") {$message = hex(substr($message, 8,4)) ." K" }
|
||||
elsif (substr($message,4,4) eq "010E") {$message = hex(substr($message, 8,4))/100}
|
||||
elsif (substr($message,4,4) eq "010F") {$message = hex(substr($message, 8,2))/10 . " °C"}
|
||||
else {$message = hex2int(substr($message, 8,4))/10 ." °C" }
|
||||
}
|
||||
|
||||
@ -830,22 +855,21 @@ sub THZ_Parse($) {
|
||||
|
||||
|
||||
when ("F4") { #allF4
|
||||
my %SomWinMode = ( "01" =>"winter", "02" => "summer");
|
||||
$message =
|
||||
"outside_temp: " . hex2int(substr($message, 4,4))/10 . " " .
|
||||
"outsideTemp: " . hex2int(substr($message, 4,4))/10 . " " .
|
||||
"x08: " . hex2int(substr($message, 8,4))/10 . " " .
|
||||
"return_temp: " . hex2int(substr($message,12,4))/10 . " " .
|
||||
"integral_heat: " . hex2int(substr($message,16,4)) . " " .
|
||||
"flow_temp: " . hex2int(substr($message,20,4))/10 . " " .
|
||||
"heat-set_temp: " . hex2int(substr($message,24,4))/10 . " " . #soll HC1
|
||||
"heat_temp: " . hex2int(substr($message,28,4))/10 . " " . #ist
|
||||
"returnTemp: " . hex2int(substr($message,12,4))/10 . " " .
|
||||
"integralHeat: " . hex2int(substr($message,16,4)) . " " .
|
||||
"flowTemp: " . hex2int(substr($message,20,4))/10 . " " .
|
||||
"heatSetTemp: " . hex2int(substr($message,24,4))/10 . " " . #soll HC1
|
||||
"heatTemp: " . hex2int(substr($message,28,4))/10 . " " . #ist
|
||||
# "x32: " . hex2int(substr($message,32,4))/10 . " " .
|
||||
"mode: " . $SomWinMode{(substr($message,38,2))} . " " .
|
||||
"seasonMode: " . $SomWinMode{(substr($message,38,2))} . " " .
|
||||
# "x40: " . hex2int(substr($message,40,4))/10 . " " .
|
||||
"integral_switch: " . hex2int(substr($message,44,4)) . " " .
|
||||
# "x48: " . hex2int(substr($message,40,4))/10 . " " .
|
||||
# "x52: " . hex2int(substr($message,52,4))/10 . " " .
|
||||
"room-set-temp: " . hex2int(substr($message,56,4))/10 ;
|
||||
"integralSwitch: " . hex2int(substr($message,44,4)) . " " .
|
||||
"opMode: " . $OpModeHC{hex(substr($message,48,2))} . " " .
|
||||
# "x52: " . hex2int(substr($message,52,4)) . " " .
|
||||
"roomSetTemp: " . hex2int(substr($message,56,4))/10 ;
|
||||
# "x60: " . hex2int(substr($message,60,4)) . " " .
|
||||
# "x64: " . hex2int(substr($message,64,4)) . " " .
|
||||
# "x68: " . hex2int(substr($message,68,4)) . " " .
|
||||
@ -855,17 +879,16 @@ sub THZ_Parse($) {
|
||||
;
|
||||
}
|
||||
when ("F5") { #allF5
|
||||
my %SomWinMode = ( "01" =>"winter", "02" => "summer");
|
||||
$message =
|
||||
"outside_temp: " . hex2int(substr($message, 4,4))/10 . " " .
|
||||
"return_temp: " . hex2int(substr($message, 8,4))/10 . " " .
|
||||
"vorlauftemp: " . hex2int(substr($message,12,4))/10 . " " .
|
||||
"heat_temp: " . hex2int(substr($message,16,4))/10 . " " .
|
||||
"heat-set_temp: " . hex2int(substr($message,20,4))/10 . " " .
|
||||
"outsideTemp: " . hex2int(substr($message, 4,4))/10 . " " .
|
||||
"returnTemp: " . hex2int(substr($message, 8,4))/10 . " " .
|
||||
"vorlaufTemp: " . hex2int(substr($message,12,4))/10 . " " .
|
||||
"heatSetTemp: " . hex2int(substr($message,16,4))/10 . " " .
|
||||
"heatTemp: " . hex2int(substr($message,20,4))/10 . " " .
|
||||
"stellgroesse: " . hex2int(substr($message,24,4))/10 . " " .
|
||||
"mode: " . $SomWinMode{(substr($message,30,2))} ;
|
||||
"seasonMode: " . $SomWinMode{(substr($message,30,2))} . " " .
|
||||
# "x32: " . hex2int(substr($message,32,4)) . " " .
|
||||
# "x36: " . hex2int(substr($message,36,4)) . " " .
|
||||
"opMode: " . $OpModeHC{hex(substr($message,36,2))} ;
|
||||
# "x40: " . hex2int(substr($message,40,4)) . " " .
|
||||
# "x44: " . hex2int(substr($message,44,4)) . " " .
|
||||
# "x48: " . hex2int(substr($message,48,4)) . " " .
|
||||
@ -883,54 +906,54 @@ sub THZ_Parse($) {
|
||||
"Date: " . (hex(substr($message,12,2))+2000) . "/" . hex(substr($message,14,2)) . "/" . hex(substr($message,16,2));
|
||||
}
|
||||
when ("FB") { #allFB
|
||||
$message = "outside_temp: " . hex2int(substr($message, 8,4))/10 . " " .
|
||||
"flow_temp: " . hex2int(substr($message,12,4))/10 . " " . #Vorlauf Temperatur
|
||||
"return_temp: " . hex2int(substr($message,16,4))/10 . " " . #Rücklauf Temperatur
|
||||
"hot_gas_temp: " . hex2int(substr($message,20,4))/10 . " " . #Heißgas Temperatur
|
||||
"dhw_temp: " . hex2int(substr($message,24,4))/10 . " " . #Speicher Temperatur current cilinder water temperature
|
||||
"flow_temp_HC2: " . hex2int(substr($message,28,4))/10 . " " . #Vorlauf TemperaturHK2
|
||||
"evaporator_temp: " . hex2int(substr($message,36,4))/10 . " " . #Speicher Temperatur
|
||||
"condenser_temp: " . hex2int(substr($message,40,4))/10 . " " .
|
||||
"Mixer_open: " . ((hex(substr($message,45,1)) & 0b0001) / 0b0001) . " " . #status bit
|
||||
"Mixer_closed: " . ((hex(substr($message,45,1)) & 0b0010) / 0b0010) . " " . #status bit
|
||||
"HeatPipeValve: " . ((hex(substr($message,45,1)) & 0b0100) / 0b0100) . " " . #status bit
|
||||
"DiverterValve: " . ((hex(substr($message,45,1)) & 0b1000) / 0b1000) . " " . #status bit
|
||||
"DHW_Pump: " . ((hex(substr($message,44,1)) & 0b0001) / 0b0001) . " " . #status bit
|
||||
"HeatingCircuit_Pump: " . ((hex(substr($message,44,1)) & 0b0010) / 0b0010) . " " . #status bit
|
||||
"Solar_Pump: " . ((hex(substr($message,44,1)) & 0b1000) / 0b1000) . " " . #status bit
|
||||
"Compressor: " . ((hex(substr($message,47,1)) & 0b1000) / 0b1000) . " " . #status bit
|
||||
"BoosterStage3: " . ((hex(substr($message,46,1)) & 0b0001) / 0b0001) . " " . #status bit
|
||||
"BoosterStage2: " . ((hex(substr($message,46,1)) & 0b0010) / 0b0010) . " " . #status bit
|
||||
"BoosterStage1: " . ((hex(substr($message,46,1)) & 0b0100) / 0b0100). " " . #status bit
|
||||
"HighPressureSensor: " . (1-((hex(substr($message,49,1)) & 0b0001) / 0b0001)) . " " . #status bit #P1 inverterd?
|
||||
"LowPressureSensor: " . (1-((hex(substr($message,49,1)) & 0b0010) / 0b0010)) . " " . #status bit #P3 inverterd?
|
||||
"EvaporatorIceMonitor: " . ((hex(substr($message,49,1)) & 0b0100) / 0b0100). " " . #status bit #N3
|
||||
"SignalAnode: " . ((hex(substr($message,49,1)) & 0b1000) / 0b1000). " " . #status bit #S1
|
||||
"EVU_release: " . ((hex(substr($message,48,1)) & 0b0001) / 0b0001). " " . #status bit
|
||||
"OvenFireplace: " . ((hex(substr($message,48,1)) & 0b0010) / 0b0010). " " . #status bit
|
||||
$message = "outsideTemp: " . hex2int(substr($message, 8,4))/10 . " " .
|
||||
"flowTemp: " . hex2int(substr($message,12,4))/10 . " " . #Vorlauf Temperatur
|
||||
"returnTemp: " . hex2int(substr($message,16,4))/10 . " " . #Rücklauf Temperatur
|
||||
"hotGasTemp: " . hex2int(substr($message,20,4))/10 . " " . #Heißgas Temperatur
|
||||
"dhwTemp: " . hex2int(substr($message,24,4))/10 . " " . #Speicher Temperatur current cilinder water temperature
|
||||
"flowTempHC2: " . hex2int(substr($message,28,4))/10 . " " . #Vorlauf TemperaturHK2
|
||||
"evaporatorTemp: " . hex2int(substr($message,36,4))/10 . " " . #Speicher Temperatur
|
||||
"condenserTemp: " . hex2int(substr($message,40,4))/10 . " " .
|
||||
"mixerOpen: " . ((hex(substr($message,45,1)) & 0b0001) / 0b0001) . " " . #status bit
|
||||
"mixerClosed: " . ((hex(substr($message,45,1)) & 0b0010) / 0b0010) . " " . #status bit
|
||||
"heatPipeValve: " . ((hex(substr($message,45,1)) & 0b0100) / 0b0100) . " " . #status bit
|
||||
"diverterValve: " . ((hex(substr($message,45,1)) & 0b1000) / 0b1000) . " " . #status bit
|
||||
"dhwPump: " . ((hex(substr($message,44,1)) & 0b0001) / 0b0001) . " " . #status bit
|
||||
"heatingCircuitPump: " . ((hex(substr($message,44,1)) & 0b0010) / 0b0010) . " " . #status bit
|
||||
"solarPump: " . ((hex(substr($message,44,1)) & 0b1000) / 0b1000) . " " . #status bit
|
||||
"compressor: " . ((hex(substr($message,47,1)) & 0b1000) / 0b1000) . " " . #status bit
|
||||
"boosterStage3: " . ((hex(substr($message,46,1)) & 0b0001) / 0b0001) . " " . #status bit
|
||||
"boosterStage2: " . ((hex(substr($message,46,1)) & 0b0010) / 0b0010) . " " . #status bit
|
||||
"boosterStage1: " . ((hex(substr($message,46,1)) & 0b0100) / 0b0100). " " . #status bit
|
||||
"highPressureSensor: " . (1-((hex(substr($message,49,1)) & 0b0001) / 0b0001)) . " " . #status bit #P1 inverterd?
|
||||
"lowPressureSensor: " . (1-((hex(substr($message,49,1)) & 0b0010) / 0b0010)) . " " . #status bit #P3 inverterd?
|
||||
"evaporatorIceMonitor: " . ((hex(substr($message,49,1)) & 0b0100) / 0b0100). " " . #status bit #N3
|
||||
"signalAnode: " . ((hex(substr($message,49,1)) & 0b1000) / 0b1000). " " . #status bit #S1
|
||||
"rvuRelease: " . ((hex(substr($message,48,1)) & 0b0001) / 0b0001). " " . #status bit
|
||||
"ovenFireplace: " . ((hex(substr($message,48,1)) & 0b0010) / 0b0010). " " . #status bit
|
||||
"STB: " . ((hex(substr($message,48,1)) & 0b0100) / 0b0100). " " . #status bit
|
||||
"OutputVentilatorPower: " . hex(substr($message,50,4))/10 . " " .
|
||||
"InputVentilatorPower: " . hex(substr($message,54,4))/10 . " " .
|
||||
"MainVentilatorPower: " . hex(substr($message,58,4))/10 . " " .
|
||||
"OutputVentilatorSpeed: " . hex(substr($message,62,4))/1 . " " . # m3/h
|
||||
"InputVentilatorSpeed: " . hex(substr($message,66,4))/1 . " " . # m3/h
|
||||
"MainVentilatorSpeed: " . hex(substr($message,70,4))/1 . " " . # m3/h
|
||||
"Outside_tempFiltered: " . hex2int(substr($message,74,4))/10 . " " .
|
||||
"Rel_humidity: " . hex2int(substr($message,78,4))/10 . " " .
|
||||
"DEW_point: " . hex2int(substr($message,86,4))/1 . " " .
|
||||
"outputVentilatorPower: " . hex(substr($message,50,4))/10 . " " .
|
||||
"inputVentilatorPower: " . hex(substr($message,54,4))/10 . " " .
|
||||
"mainVentilatorPower: " . hex(substr($message,58,4))/10 . " " .
|
||||
"outputVentilatorSpeed: " . hex(substr($message,62,4))/1 . " " . # m3/h
|
||||
"inputVentilatorSpeed: " . hex(substr($message,66,4))/1 . " " . # m3/h
|
||||
"mainVentilatorSpeed: " . hex(substr($message,70,4))/1 . " " . # m3/h
|
||||
"outside_tempFiltered: " . hex2int(substr($message,74,4))/10 . " " .
|
||||
"relHumidity: " . hex2int(substr($message,78,4))/10 . " " .
|
||||
"dewPoint: " . hex2int(substr($message,86,4))/1 . " " .
|
||||
"P_Nd: " . hex2int(substr($message,86,4))/100 . " " . #bar
|
||||
"P_Hd: " . hex2int(substr($message,90,4))/100 . " " . #bar
|
||||
"Actual_power_Qc: " . hex2int(substr($message,94,8))/1 . " " . #kw
|
||||
"Actual_power_Pel: " . hex2int(substr($message,102,4))/1 . " " . #kw
|
||||
"collector_temp: " . hex2int(substr($message, 4,4))/10 . " " . #kw
|
||||
"inside_temp: " . hex2int(substr($message, 32,4))/10 ; #Innentemperatur
|
||||
"actualPower_Qc: " . hex2int(substr($message,94,8))/1 . " " . #kw
|
||||
"actualPower_Pel: " . hex2int(substr($message,102,4))/1 . " " . #kw
|
||||
"collectorTemp: " . hex2int(substr($message, 4,4))/10 . " " . #kw
|
||||
"insideTemp: " . hex2int(substr($message, 32,4))/10 ; #Innentemperatur
|
||||
}
|
||||
when ("09") { #operating history
|
||||
$message = "compressor_heating: " . hex(substr($message, 4,4)) . " " .
|
||||
"compressor_cooling: " . hex(substr($message, 8,4)) . " " .
|
||||
"compressor_dhw: " . hex(substr($message, 12,4)) . " " .
|
||||
"booster_dhw: " . hex(substr($message, 16,4)) . " " .
|
||||
"booster_heating: " . hex(substr($message, 20,4)) ;
|
||||
$message = "compressorHeating: " . hex(substr($message, 4,4)) . " " .
|
||||
"compressorCooling: " . hex(substr($message, 8,4)) . " " .
|
||||
"compressorDHW: " . hex(substr($message, 12,4)) . " " .
|
||||
"boosterDHW: " . hex(substr($message, 16,4)) . " " .
|
||||
"boosterHeating: " . hex(substr($message, 20,4)) ;
|
||||
}
|
||||
when ("D1") { #last10errors tested only for 1 error { THZ_Parse("6BD1010115008D07EB030000000000000000000") }
|
||||
$message = "number_of_faults: " . hex(substr($message, 4,2)) . " " .
|
||||
@ -1003,8 +1026,8 @@ my %parsinghash = (
|
||||
sub THZ_debugread($){
|
||||
my ($hash) = @_;
|
||||
my ($err, $msg) =("", " ");
|
||||
my @numbers=('01', '09', '16', 'D1', 'D2', 'E8', 'E9', 'F2', 'F3', 'F4', 'F5', 'F6', 'FB', 'FC', 'FD', 'FE');
|
||||
#my @numbers=('0A0112','0A0126');
|
||||
# my @numbers=('01', '09', '16', 'D1', 'D2', 'E8', 'E9', 'F2', 'F3', 'F4', 'F5', 'F6', 'FB', 'FC', 'FD', 'FE');
|
||||
my @numbers=('0A056E','0A0126');
|
||||
#my @numbers = (1..255);
|
||||
#my @numbers = (1..65535);
|
||||
my $indice= "FF";
|
||||
@ -1045,8 +1068,22 @@ sub THZ_debugread($){
|
||||
}
|
||||
}
|
||||
|
||||
#######################################
|
||||
#THZ_Attr($)
|
||||
#in case of change of attribute starting with interval_ refresh all
|
||||
########################################################################################
|
||||
|
||||
|
||||
sub THZ_Attr(@) {
|
||||
my ($cmd, $name, $attrName, $attrVal) = @_;
|
||||
my $hash = $defs{$name};
|
||||
if( $attrName =~ /^interval_/ ) {
|
||||
DevIo_CloseDev($hash);
|
||||
RemoveInternalTimer($hash);
|
||||
#sleep 1;
|
||||
DevIo_OpenDev($hash, 1, "THZ_Refresh_all_gets");
|
||||
}
|
||||
return undef;
|
||||
}
|
||||
|
||||
|
||||
|
||||
@ -1101,6 +1138,7 @@ sub THZ_Undef($$) {
|
||||
This module is not working if you have an older firmware; Nevertheless, "parsing" could be easily updated, because now the registers are well described.
|
||||
https://answers.launchpad.net/heatpumpmonitor/+question/100347 <br>
|
||||
Implemented: read of status parameters and read/write of configuration parameters.
|
||||
A complete description can be found in the 00_THZ wiki http://www.fhemwiki.de/wiki/Tecalor_THZ_Heatpump
|
||||
<br><br>
|
||||
|
||||
<a name="THZdefine"></a>
|
||||
@ -1122,13 +1160,13 @@ sub THZ_Undef($$) {
|
||||
<br>
|
||||
<ul><code>
|
||||
define Mythz THZ /dev/ttyUSB0@115200 <br>
|
||||
attr Mythz interval_allFB 300 # internal polling interval 5min <br>
|
||||
attr Mythz interval_history 28800 # internal polling interval 8h <br>
|
||||
attr Mythz interval_last10errors 86400 # internal polling interval 24h <br>
|
||||
attr Mythz interval_Status_Sol_16 86400 # internal polling interval 24h <br>
|
||||
attr Mythz interval_Status_DHW_F3 86400 # internal polling interval 24h <br>
|
||||
attr Mythz interval_Status_HC1_F4 86400 # internal polling interval 24h <br>
|
||||
attr Mythz interval_Status_HC2_F5 86400 # internal polling interval 24h <br>
|
||||
attr Mythz interval_sGlobal 300 # internal polling interval 5min <br>
|
||||
attr Mythz interval_sHistory 28800 # internal polling interval 8h <br>
|
||||
attr Mythz interval_sLast10errors 86400 # internal polling interval 24h <br>
|
||||
attr Mythz interval_sSol 86400 # internal polling interval 24h <br>
|
||||
attr Mythz interval_sDHW 86400 # internal polling interval 24h <br>
|
||||
attr Mythz interval_sHC1 86400 # internal polling interval 24h <br>
|
||||
attr Mythz interval_sHC2 86400 # internal polling interval 24h <br>
|
||||
define FileLog_Mythz FileLog ./log/Mythz-%Y.log Mythz <br>
|
||||
</code></ul>
|
||||
<br>
|
||||
@ -1137,8 +1175,8 @@ sub THZ_Undef($$) {
|
||||
<br>
|
||||
<ul><code>
|
||||
define Mythz THZ /dev/ttyUSB0@115200 <br>
|
||||
define atMythzFB at +*00:05:00 {fhem "get Mythz allFB","1";;return()} <br>
|
||||
define atMythz09 at +*08:00:00 {fhem "get Mythz history","1";;return()} <br>
|
||||
define atMythzFB at +*00:05:00 {fhem "get Mythz sGlobal","1";;return()} <br>
|
||||
define atMythz09 at +*08:00:00 {fhem "get Mythz sHistory","1";;return()} <br>
|
||||
define FileLog_Mythz FileLog ./log/Mythz-%Y.log Mythz <br>
|
||||
</code></ul>
|
||||
|
||||
@ -1163,6 +1201,7 @@ sub THZ_Undef($$) {
|
||||
beschrieben wurden.
|
||||
https://answers.launchpad.net/heatpumpmonitor/+question/100347 <br>
|
||||
Implementiert: Lesen der Statusinformation sowie Lesen und Schreiben einzelner Einstellungen.
|
||||
Genauere Beschreinung des Modules --> 00_THZ wiki http://www.fhemwiki.de/wiki/Tecalor_THZ_W%C3%A4rmepumpe
|
||||
<br><br>
|
||||
|
||||
<a name="THZdefine"></a>
|
||||
@ -1184,13 +1223,13 @@ sub THZ_Undef($$) {
|
||||
<br>
|
||||
<ul><code>
|
||||
define Mythz THZ /dev/ttyUSB0@115200 <br>
|
||||
attr Mythz interval_allFB 300 # Internes Polling Intervall 5min <br>
|
||||
attr Mythz interval_history 28800 # Internes Polling Intervall 8h <br>
|
||||
attr Mythz interval_last10errors 86400 # Internes Polling Intervall 24h <br>
|
||||
attr Mythz interval_Status_Sol_16 86400 # Internes Polling Intervall 24h <br>
|
||||
attr Mythz interval_Status_DHW_F3 86400 # Internes Polling Intervall 24h <br>
|
||||
attr Mythz interval_Status_HC1_F4 86400 # Internes Polling Intervall 24h <br>
|
||||
attr Mythz interval_Status_HC2_F5 86400 # Internes Polling Intervall 24h <br>
|
||||
attr Mythz interval_sGlobal 300 # Internes Polling Intervall 5min <br>
|
||||
attr Mythz interval_sHistory 28800 # Internes Polling Intervall 8h <br>
|
||||
attr Mythz interval_sLast10errors 86400 # Internes Polling Intervall 24h <br>
|
||||
attr Mythz interval_sSol 86400 # Internes Polling Intervall 24h <br>
|
||||
attr Mythz interval_sDHW 86400 # Internes Polling Intervall 24h <br>
|
||||
attr Mythz interval_sHC1 86400 # Internes Polling Intervall 24h <br>
|
||||
attr Mythz interval_sHC2 86400 # Internes Polling Intervall 24h <br>
|
||||
define FileLog_Mythz FileLog ./log/Mythz-%Y.log Mythz <br>
|
||||
</code></ul>
|
||||
<br>
|
||||
@ -1199,8 +1238,8 @@ sub THZ_Undef($$) {
|
||||
<br>
|
||||
<ul><code>
|
||||
define Mythz THZ /dev/ttyUSB0@115200 <br>
|
||||
define atMythzFB at +*00:05:00 {fhem "get Mythz allFB","1";;return()} <br>
|
||||
define atMythz09 at +*08:00:00 {fhem "get Mythz history","1";;return()} <br>
|
||||
define atMythzFB at +*00:05:00 {fhem "get Mythz sGlobal","1";;return()} <br>
|
||||
define atMythz09 at +*08:00:00 {fhem "get Mythz sHistory","1";;return()} <br>
|
||||
define FileLog_Mythz FileLog ./log/Mythz-%Y.log Mythz <br>
|
||||
</code></ul>
|
||||
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user