mirror of
https://github.com/fhem/fhem-mirror.git
synced 2025-03-03 10:46:53 +00:00
58_RPI_1Wire: added on-for-timer and validated DS2408
git-svn-id: https://svn.fhem.de/fhem/trunk@28208 2b470e98-0d58-463d-a4d8-8e2adae1ed80
This commit is contained in:
Adimarantis
parent
56bc125eb6
commit
40a326bb08
@ -1,5 +1,6 @@
|
||||
# Add changes at the top of the list. Keep it in ASCII, and 80-char wide.
|
||||
# Do not insert empty lines here, update check depends on it.
|
||||
- feature: 58_RPI_1Wire: added on-for-timer and validated DS2408
|
||||
- change: 10_KNX.pm: minor changes, see Forum #122582
|
||||
- change: 00_KNXIO.pm: minor changes, see Forum #127792
|
||||
- feature: 76_SolarForecast: graphicHeaderOwnspec: show readings of other devs
|
||||
|
||||
@ -124,6 +124,7 @@ sub RPI_1Wire_Init { #
|
||||
$family="DHT".$1;
|
||||
$device=$family;
|
||||
} else {
|
||||
#testing - comment next line to create devices without HW check
|
||||
return "Device $arg does not exist" if (! -e "$w1_path/$arg" and $check==1 and $force==0); #Only quit if coming from interactive define
|
||||
($family, $id) = split('-',$arg);
|
||||
return "Unknown device family $family" if !defined $RPI_1Wire_Devices{$family};
|
||||
@ -143,6 +144,11 @@ sub RPI_1Wire_Init { #
|
||||
$hash->{helper}{write}.="resolution ";
|
||||
}
|
||||
}
|
||||
if ($type eq "switch") {
|
||||
if (-e "$w1_path/$arg/output" && !-w "$w1_path/$arg/output") {
|
||||
$hash->{helper}{write}.="output ";
|
||||
}
|
||||
}
|
||||
if ($device eq "BUSMASTER") {
|
||||
if (-e "$w1_path/$arg/therm_bulk_read") {
|
||||
$hash->{helper}{write}.="therm_bulk_read " if (!-w "$w1_path/$arg/therm_bulk_read");
|
||||
@ -289,10 +295,12 @@ sub RPI_1Wire_SetConversion {
|
||||
}
|
||||
|
||||
sub RPI_1Wire_Switch {
|
||||
my ($hash,$switch)= @_;
|
||||
Log3 $hash->{NAME}, 3, $hash->{NAME}.": Switching $hash->{DEF} to $switch";
|
||||
my ($hash,$switch,$pio,$cmd,$duration)= @_;
|
||||
Log3 $hash->{NAME}, 3, $hash->{NAME}.": Switching $hash->{DEF} to $switch ($pio $cmd) for ($duration)";
|
||||
my $fh;
|
||||
my $path="$w1_path/$hash->{DEF}/output";
|
||||
#testing - uncomment to test with a normal file
|
||||
#my $path="/home/pi/state";
|
||||
if (open($fh, ">", $path)) {
|
||||
print $fh pack("C",$switch);
|
||||
close($fh);
|
||||
@ -302,6 +310,12 @@ sub RPI_1Wire_Switch {
|
||||
#After setting switch, read back to set readings correctly
|
||||
my $ret=RPI_1Wire_Poll($hash);
|
||||
RPI_1Wire_FinishFn($ret);
|
||||
if ($cmd =~ /-for-timer$/) {
|
||||
$cmd=( $cmd =~ /^on/?"off":"on"); #Revert condition to be executed after timer
|
||||
return "Invalid duration $duration" if (!looks_like_number($duration));
|
||||
Log3 $hash->{NAME}, 4, $hash->{NAME}.": Setting time for switching $hash->{DEF} $pio to $cmd in $duration s";
|
||||
InternalTimer(gettimeofday()+$duration, sub { RPI_1Wire_Set($hash, $hash->{NAME},($pio,$cmd)); },0);
|
||||
}
|
||||
return;
|
||||
|
||||
}
|
||||
@ -328,11 +342,11 @@ sub RPI_1Wire_Set {
|
||||
}
|
||||
}
|
||||
if ($type eq "switch" or $type eq "2p-switch") {
|
||||
$sets.="pioa:on,off piob:on,off ";
|
||||
$sets.="pioa:widgetList,5,select,on,off,on-for-timer,off-for-timer,1,textField piob:widgetList,5,select,on,off,on-for-timer,off-for-timer,1,textField ";
|
||||
}
|
||||
if ($type eq "8p-switch") {
|
||||
for my $i ((0..7)) {
|
||||
$sets.="pio".$i.":on,off ";
|
||||
$sets.="pio".$i.":widgetList,5,select,on,off,on-for-timer,off-for-timer,1,textField ";
|
||||
}
|
||||
}
|
||||
if ($device =~ /(BUSMASTER)(-\d)?$/) {
|
||||
@ -348,35 +362,41 @@ sub RPI_1Wire_Set {
|
||||
|
||||
if ( $cmd eq "?" ) {
|
||||
return "RPI_1Wire_Set: Unknown argument $cmd, choose one of " . $sets;
|
||||
}
|
||||
if ($cmd =~ /^pio(a|b)/ and @args==1) {
|
||||
my $val=shift @args;
|
||||
Log3 $name, 3, $name." set pio $1 $val\n";
|
||||
}
|
||||
my @cm;
|
||||
if (@args>0) {
|
||||
@cm=split(",",$args[0]);
|
||||
push @cm,$args[1] if (@args>1);
|
||||
push @cm,"-" if (@cm==1);
|
||||
}
|
||||
if ($cmd =~ /^pio(a|b)/ and @cm>0) {
|
||||
Log3 $name, 3, $name." set pio $1 $cm[0] $cm[1]\n";
|
||||
my $set=0;
|
||||
if ($cmd eq "pioa") {
|
||||
$set=ReadingsVal($name,"piob","0")*2+($val eq "on"?1:0);
|
||||
$set=ReadingsVal($name,"piob","0")*2+($cm[0] =~ /^on/?1:0);
|
||||
} else {
|
||||
$set=ReadingsVal($name,"pioa","0")+($val eq "on"?1:0)*2;
|
||||
$set=ReadingsVal($name,"pioa","0")+($cm[0] =~ /^on/?1:0)*2;
|
||||
}
|
||||
if ($type eq "2p-switch") {
|
||||
$set=($set^3); #bits are inverted on DS2413
|
||||
}
|
||||
return RPI_1Wire_Switch($hash,$set);
|
||||
return RPI_1Wire_Switch($hash,$set,$cmd, $cm[0],$cm[1]);
|
||||
}
|
||||
if ($cmd =~ /^pio(\d)/ and @args==1) {
|
||||
my $val=shift @args;
|
||||
Log3 $name, 3, $name." set pio $1 $val\n";
|
||||
if ($cmd =~ /^pio(\d)/ and @cm>0) {
|
||||
my $pio=$1;
|
||||
Log3 $name, 3, $name." set pio $pio $cm[0] $cm[1]\n";
|
||||
my $id=$1;
|
||||
my $set=0;
|
||||
for my $i (0..7) {
|
||||
my $bit=2**$i;
|
||||
if ($i==$id) {
|
||||
$set+=($val eq "on"?1:0)*$bit;
|
||||
$set+=($cm[0] =~ /^on/?1:0)*$bit;
|
||||
} else {
|
||||
$set+=ReadingsVal($name,"pio".$i,"0")*$bit;
|
||||
}
|
||||
}
|
||||
return RPI_1Wire_Switch($hash,$set);
|
||||
$set=($set^255); # invert bits
|
||||
return RPI_1Wire_Switch($hash,$set,$cmd, $cm[0],$cm[1]);
|
||||
}
|
||||
|
||||
if ($cmd eq "precision" and @args==1) {
|
||||
@ -433,6 +453,7 @@ sub RPI_1Wire_Get {
|
||||
$script .= "chmod g+w /sys/devices/w1_bus_master*/therm_bulk_read;\\\n";
|
||||
$script .= "chmod g+w /sys/devices/w1_bus_master*/*/resolution;\\\n";
|
||||
$script .= "chmod g+w /sys/devices/w1_bus_master*/*/conv_time;\\ \'\"\n";
|
||||
$script .= "chmod g+w /sys/devices/w1_bus_master*/*/output;\\ \'\"\n";
|
||||
|
||||
return $ret.$script;
|
||||
}
|
||||
@ -485,9 +506,11 @@ sub RPI_1Wire_Poll {
|
||||
my @data;
|
||||
foreach (@path) {
|
||||
$file="$w1_path/$device/$_";
|
||||
#testing - uncomment to test with a normal file
|
||||
#if ($type =~ /switch/) {
|
||||
# $file="/home/pi/state";
|
||||
#}
|
||||
#testing
|
||||
if ($family =~ /DHT(11|22)/) {
|
||||
my $env = RPi::DHT->new($id,$1,1);
|
||||
Log3 $name, 4 , $name.": Using RPi::DHT for $id DHT-$1";
|
||||
@ -576,7 +599,7 @@ sub RPI_1Wire_Poll {
|
||||
if ($type eq "8p-switch") {
|
||||
my $pin=0;
|
||||
foreach (@pio) {
|
||||
$retval.=" pio".$pin++."=".$_;
|
||||
$retval.=" pio".$pin++."=".($_^1);
|
||||
}
|
||||
} else {
|
||||
if ($type eq "2p-switch") {
|
||||
@ -718,7 +741,7 @@ For German documentation see <a href="https://wiki.fhem.de/wiki/RPI_1Wire">Wiki<
|
||||
<li>Family 0x1d (DS2423) dual counter</li>
|
||||
<li>Family 0x26 (DS2438) a/d converter with temperature support</li>
|
||||
<li>Family 0x28 (DS18B20) temperature</li>
|
||||
<li>Family 0x29 (DS2408) 8 port switch (untested)</li>
|
||||
<li>Family 0x29 (DS2408) 8 port switch</li>
|
||||
<li>Family 0x3a (DS2413) adressable 2 port switch</li>
|
||||
<li>Family 0x3b (DS1825) temperature</li>
|
||||
<li>Family 0x42 (DS28EA00) temperature</li>
|
||||
@ -777,17 +800,20 @@ For German documentation see <a href="https://wiki.fhem.de/wiki/RPI_1Wire">Wiki<
|
||||
<a id="RPI_1Wire-set-clear"></a>
|
||||
Clears the failures counter.
|
||||
</li>
|
||||
<li><b>set pioa on|off</b><br>
|
||||
<li><b>set pioa on|off <duration></b><br>
|
||||
<a id="RPI_1Wire-set-pioa"></a>
|
||||
Sets the pioa of a 2 port switch to on or off.
|
||||
Sets the pioa of a 2 port switch to on or off.<br>
|
||||
The optional duration switches the pio back after a given number of seconds. The alternative options "on-for-timer" and "off-for-timer" work identically and are only provided to find this functionality more easily.
|
||||
</li>
|
||||
<li><b>set piob on|off</b><br>
|
||||
<li><b>set piob on|off <duration></b><br>
|
||||
<a id="RPI_1Wire-set-piob"></a>
|
||||
Sets the piob of a 2 port switch to on or off.
|
||||
Sets the piob of a 2 port switch to on or off.<br>
|
||||
The optional duration switches the pio back after a given number of seconds. The alternative options "on-for-timer" and "off-for-timer" work identically and are only provided to find this functionality more easily.
|
||||
</li>
|
||||
<li><b>set pio(0-7) on|off</b><br>
|
||||
<li><b>set pio(0-7) on|off <duration></b><br>
|
||||
<a id="RPI_1Wire-set-pio0"></a>
|
||||
Sets the according pio of a 8 port switch (0-7) to on or off. (untested)
|
||||
Sets the according pio of a 8 port switch (0-7) to on or off.<br>
|
||||
The optional duration switches the pio back after a given number of seconds. The alternative options "on-for-timer" and "off-for-timer" work identically and are only provided to find this functionality more easily.
|
||||
</li>
|
||||
</ul>
|
||||
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user