mirror of
https://github.com/fhem/fhem-mirror.git
synced 2025-01-31 18:59:33 +00:00
52_I2C_SHT3x.pm: module added
git-svn-id: https://svn.fhem.de/fhem/trunk@11780 2b470e98-0d58-463d-a4d8-8e2adae1ed80
This commit is contained in:
macs00
parent
dd1d78c69c
commit
1344193092
@ -1,5 +1,6 @@
|
|||||||
# Add changes at the top of the list. Keep it in ASCII, and 80-char wide.
|
# Add changes at the top of the list. Keep it in ASCII, and 80-char wide.
|
||||||
# Do not insert empty lines here, update check depends on it.
|
# Do not insert empty lines here, update check depends on it.
|
||||||
|
- feature: new module added: 52_I2C_SHT3x.pm (macs)
|
||||||
- bugfix: 70_Jabber: log OTR empty message if debug-mode == 1 only
|
- bugfix: 70_Jabber: log OTR empty message if debug-mode == 1 only
|
||||||
- changed: 70_BRAVIA: re-worked state handling
|
- changed: 70_BRAVIA: re-worked state handling
|
||||||
- feature: PRESENCE: new attribute presenceThreshold to define a number of
|
- feature: PRESENCE: new attribute presenceThreshold to define a number of
|
||||||
|
|||||||
406
fhem/FHEM/52_I2C_SHT3x.pm
Normal file
406
fhem/FHEM/52_I2C_SHT3x.pm
Normal file
@ -0,0 +1,406 @@
|
|||||||
|
##############################################
|
||||||
|
# $Id$
|
||||||
|
#
|
||||||
|
# 52_I2C_SHT3x.pm
|
||||||
|
#
|
||||||
|
# i2c sensor for humidity and temperature
|
||||||
|
#
|
||||||
|
# Basis for this module is "52_I2C_SHT21.pm" from klausw. I adapted the module so that it
|
||||||
|
# is suitable for the SHT3x family from Sensirion / Switzerland. At moment the SHT3x family
|
||||||
|
# consists of 3 sensors:
|
||||||
|
# SHT30 (Low-Cost): sensor with less accuracy
|
||||||
|
# SHT31 (Standard): sensor with good accuracy
|
||||||
|
# SHT35 (High-End): sensor with best accuracy
|
||||||
|
#
|
||||||
|
# Via hardware pin configuration the sensor can be configured for 2 different i2c addresses.
|
||||||
|
#
|
||||||
|
#
|
||||||
|
# If you have any questions, suggestions or like to report a failure, please feel free to cantact me:
|
||||||
|
# FHEM Forum username: macs
|
||||||
|
#
|
||||||
|
##############################################
|
||||||
|
|
||||||
|
package main;
|
||||||
|
|
||||||
|
use strict;
|
||||||
|
use warnings;
|
||||||
|
|
||||||
|
use constant {
|
||||||
|
# 0x44 (default): ADDR (pin 2) connected to VSS (supply voltage)
|
||||||
|
# 0x45 : ADDR (pin 2) connected to VDD (ground)
|
||||||
|
SHT3x_I2C_ADDRESS => '0x44',
|
||||||
|
};
|
||||||
|
|
||||||
|
##################################################
|
||||||
|
# Forward declarations
|
||||||
|
#
|
||||||
|
sub I2C_SHT3x_Initialize($);
|
||||||
|
sub I2C_SHT3x_Define($$);
|
||||||
|
sub I2C_SHT3x_Attr(@);
|
||||||
|
sub I2C_SHT3x_Poll($);
|
||||||
|
sub I2C_SHT3x_Set($@);
|
||||||
|
sub I2C_SHT3x_Undef($$);
|
||||||
|
sub I2C_SHT3x_DbLog_splitFn($);
|
||||||
|
|
||||||
|
my %sets = (
|
||||||
|
'readValues' => 1,
|
||||||
|
);
|
||||||
|
|
||||||
|
sub I2C_SHT3x_Initialize($) {
|
||||||
|
my ($hash) = @_;
|
||||||
|
|
||||||
|
$hash->{DefFn} = 'I2C_SHT3x_Define';
|
||||||
|
$hash->{InitFn} = 'I2C_SHT3x_Init';
|
||||||
|
$hash->{AttrFn} = 'I2C_SHT3x_Attr';
|
||||||
|
$hash->{SetFn} = 'I2C_SHT3x_Set';
|
||||||
|
$hash->{UndefFn} = 'I2C_SHT3x_Undef';
|
||||||
|
$hash->{I2CRecFn} = 'I2C_SHT3x_I2CRec';
|
||||||
|
$hash->{AttrList} = 'IODev do_not_notify:0,1 showtime:0,1 poll_interval:1,2,5,10,20,30 ' .
|
||||||
|
'roundHumidityDecimal:0,1,2 roundTemperatureDecimal:0,1,2 ' .
|
||||||
|
$readingFnAttributes;
|
||||||
|
$hash->{DbLog_splitFn} = "I2C_SHT3x_DbLog_splitFn";
|
||||||
|
}
|
||||||
|
|
||||||
|
sub I2C_SHT3x_Define($$) {
|
||||||
|
my ($hash, $def) = @_;
|
||||||
|
my @a = split('[ \t][ \t]*', $def);
|
||||||
|
|
||||||
|
$hash->{STATE} = "defined";
|
||||||
|
|
||||||
|
if ($main::init_done) {
|
||||||
|
eval { I2C_SHT3x_Init( $hash, [ @a[ 2 .. scalar(@a) - 1 ] ] ); };
|
||||||
|
return I2C_SHT3x_Catch($@) if $@;
|
||||||
|
}
|
||||||
|
return undef;
|
||||||
|
}
|
||||||
|
|
||||||
|
sub I2C_SHT3x_Init($$) {
|
||||||
|
my ( $hash, $args ) = @_;
|
||||||
|
|
||||||
|
my $name = $hash->{NAME};
|
||||||
|
|
||||||
|
if (defined $args && int(@$args) > 1)
|
||||||
|
{
|
||||||
|
return "Define: Wrong syntax. Usage:\n" .
|
||||||
|
"define <name> I2C_SHT3x [<i2caddress>]";
|
||||||
|
}
|
||||||
|
|
||||||
|
if (defined (my $address = shift @$args)) {
|
||||||
|
$hash->{I2C_Address} = $address =~ /^0.*$/ ? oct($address) : $address;
|
||||||
|
return "$name I2C Address not valid" unless (($hash->{I2C_Address} < 128) && ($hash->{I2C_Address} > 3));
|
||||||
|
} else {
|
||||||
|
$hash->{I2C_Address} = hex(SHT3x_I2C_ADDRESS);
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
my $msg = '';
|
||||||
|
# create default attributes
|
||||||
|
if (AttrVal($name, 'poll_interval', '?') eq '?') {
|
||||||
|
$msg = CommandAttr(undef, $name . ' poll_interval 5');
|
||||||
|
if ($msg) {
|
||||||
|
Log3 ($hash, 1, $msg);
|
||||||
|
return $msg;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
AssignIoPort($hash);
|
||||||
|
$hash->{STATE} = 'Initialized';
|
||||||
|
|
||||||
|
return undef;
|
||||||
|
}
|
||||||
|
|
||||||
|
sub I2C_SHT3x_Catch($) {
|
||||||
|
my $exception = shift;
|
||||||
|
if ($exception) {
|
||||||
|
$exception =~ /^(.*)( at.*FHEM.*)$/;
|
||||||
|
return $1;
|
||||||
|
}
|
||||||
|
return undef;
|
||||||
|
}
|
||||||
|
|
||||||
|
sub I2C_SHT3x_Attr (@) {# hier noch Werteueberpruefung einfuegen
|
||||||
|
my ($command, $name, $attr, $val) = @_;
|
||||||
|
my $hash = $defs{$name};
|
||||||
|
my $msg = '';
|
||||||
|
if ($command && $command eq "set" && $attr && $attr eq "IODev") {
|
||||||
|
eval {
|
||||||
|
if ($main::init_done and (!defined ($hash->{IODev}) or $hash->{IODev}->{NAME} ne $val)) {
|
||||||
|
main::AssignIoPort($hash,$val);
|
||||||
|
my @def = split (' ',$hash->{DEF});
|
||||||
|
I2C_SHT3x_Init($hash,\@def) if (defined ($hash->{IODev}));
|
||||||
|
}
|
||||||
|
};
|
||||||
|
return I2C_SHT3x_Catch($@) if $@;
|
||||||
|
}
|
||||||
|
if ($attr eq 'poll_interval') {
|
||||||
|
if ($val > 0) {
|
||||||
|
RemoveInternalTimer($hash);
|
||||||
|
InternalTimer(gettimeofday() + 5, 'I2C_SHT3x_Poll', $hash, 0);
|
||||||
|
} else {
|
||||||
|
$msg = 'Wrong poll intervall defined. poll_interval must be a number > 0';
|
||||||
|
}
|
||||||
|
} elsif ($attr eq 'roundHumidityDecimal') {
|
||||||
|
$msg = 'Wrong $attr defined. Use one of 0, 1, 2' if defined($val) && $val <= 0 && $val >= 2 ;
|
||||||
|
} elsif ($attr eq 'roundTemperatureDecimal') {
|
||||||
|
$msg = 'Wrong $attr defined. Use one of 0, 1, 2' if defined($val) && $val <= 0 && $val >= 2 ;
|
||||||
|
}
|
||||||
|
return ($msg) ? $msg : undef;
|
||||||
|
}
|
||||||
|
|
||||||
|
sub I2C_SHT3x_Poll($) {
|
||||||
|
my ($hash) = @_;
|
||||||
|
my $name = $hash->{NAME};
|
||||||
|
|
||||||
|
# Read values
|
||||||
|
I2C_SHT3x_Set($hash, ($name, 'readValues'));
|
||||||
|
|
||||||
|
my $pollInterval = AttrVal($hash->{NAME}, 'poll_interval', 0);
|
||||||
|
if ($pollInterval > 0) {
|
||||||
|
InternalTimer(gettimeofday() + ($pollInterval * 60), 'I2C_SHT3x_Poll', $hash, 0);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
sub I2C_SHT3x_Set($@) {
|
||||||
|
my ($hash, @a) = @_;
|
||||||
|
my $name = $a[0];
|
||||||
|
my $cmd = $a[1];
|
||||||
|
|
||||||
|
if(!defined($sets{$cmd})) {
|
||||||
|
return 'Unknown argument ' . $cmd . ', choose one of ' . join(' ', keys %sets)
|
||||||
|
}
|
||||||
|
|
||||||
|
if ($cmd eq 'readValues') {
|
||||||
|
I2C_SHT3x_triggerTempHum($hash);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
sub I2C_SHT3x_Undef($$) {
|
||||||
|
my ($hash, $arg) = @_;
|
||||||
|
|
||||||
|
RemoveInternalTimer($hash);
|
||||||
|
return undef;
|
||||||
|
}
|
||||||
|
|
||||||
|
sub I2C_SHT3x_I2CRec ($$) {
|
||||||
|
my ($hash, $clientmsg) = @_;
|
||||||
|
my $name = $hash->{NAME};
|
||||||
|
my $phash = $hash->{IODev};
|
||||||
|
my $pname = $phash->{NAME};
|
||||||
|
while ( my ( $k, $v ) = each %$clientmsg ) { #erzeugen von Internals fuer alle Keys in $clientmsg die mit dem physical Namen beginnen
|
||||||
|
$hash->{$k} = $v if $k =~ /^$pname/ ;
|
||||||
|
}
|
||||||
|
|
||||||
|
# i2c data received?
|
||||||
|
if ( $clientmsg->{direction} && $clientmsg->{$pname . "_SENDSTAT"} && $clientmsg->{$pname . "_SENDSTAT"} eq "Ok" ) {
|
||||||
|
if ( $clientmsg->{direction} eq "i2cread" && defined($clientmsg->{received}) ) {
|
||||||
|
Log3 $hash, 5, "empfangen: $clientmsg->{received}";
|
||||||
|
my @raw = split(" ",$clientmsg->{received});
|
||||||
|
I2C_SHT3x_GetTempHum ($hash, $clientmsg->{received}) if $clientmsg->{nbyte} == 6;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
sub I2C_SHT3x_GetTempHum ($$) {
|
||||||
|
my ($hash, $rawdata) = @_;
|
||||||
|
my @raw = split(" ",$rawdata);
|
||||||
|
|
||||||
|
if ( defined (my $crc = I2C_SHT3x_CheckCrc(@raw[0..2])) ) { #CRC Test
|
||||||
|
Log3 $hash, 2, "CRC error temperature data(Temp_MSB Temp_LSB Temp_Chechsum Hum_MSB Hum_LSB Hum_Chechsum): $rawdata, Checksum calculated: $crc";
|
||||||
|
$hash->{CRCErrorTemperature}++;
|
||||||
|
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
if ( defined (my $crc = I2C_SHT3x_CheckCrc(@raw[3..5])) ) { #CRC Test
|
||||||
|
Log3 $hash, 2, "CRC error humidity data(Temp_MSB Temp_LSB Temp_Chechsum Hum_MSB Hum_LSB Hum_Chechsum): $rawdata, Checksum calculated: $crc";
|
||||||
|
$hash->{CRCErrorHumidity}++;
|
||||||
|
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
my $name = $hash->{NAME};
|
||||||
|
|
||||||
|
my $temperature = ($raw[0] << 8) | $raw[1];
|
||||||
|
$temperature = ( 175.0 * ($temperature / ((2**16)-1.0) )) - 45.0;
|
||||||
|
$temperature = sprintf(
|
||||||
|
'%.' . AttrVal($hash->{NAME}, 'roundTemperatureDecimal', 1) . 'f',
|
||||||
|
$temperature
|
||||||
|
);
|
||||||
|
|
||||||
|
my $humidity = ($raw[3] << 8) | $raw[4];
|
||||||
|
$humidity = 100.0 * ($humidity / ((2**16)-1.0) );
|
||||||
|
$humidity = sprintf(
|
||||||
|
'%.' . AttrVal($hash->{NAME}, 'roundHumidityDecimal', 1) . 'f',
|
||||||
|
$humidity
|
||||||
|
);
|
||||||
|
|
||||||
|
readingsBeginUpdate($hash);
|
||||||
|
readingsBulkUpdate(
|
||||||
|
$hash,
|
||||||
|
'state',
|
||||||
|
'T: ' . $temperature . ' H: ' . $humidity
|
||||||
|
);
|
||||||
|
readingsBulkUpdate($hash, 'temperature', $temperature);
|
||||||
|
readingsBulkUpdate($hash, 'humidity', $humidity);
|
||||||
|
readingsEndUpdate($hash, 1);
|
||||||
|
}
|
||||||
|
|
||||||
|
sub I2C_SHT3x_triggerTempHum($) {
|
||||||
|
my ($hash) = @_;
|
||||||
|
my $name = $hash->{NAME};
|
||||||
|
return "$name: no IO device defined" unless ($hash->{IODev});
|
||||||
|
my $phash = $hash->{IODev};
|
||||||
|
my $pname = $phash->{NAME};
|
||||||
|
|
||||||
|
# Write decimal 36 00 to device. This requests a "Repeatability = High, Clock stretching = disabled" temperature and humidity reading
|
||||||
|
my $i2creq = { i2caddress => $hash->{I2C_Address}, direction => "i2cwrite" };
|
||||||
|
$i2creq->{data} = "36 00";
|
||||||
|
CallFn($pname, "I2CWrtFn", $phash, $i2creq);
|
||||||
|
RemoveInternalTimer($hash);
|
||||||
|
InternalTimer(gettimeofday() + 1, 'I2C_SHT3x_readValue', $hash, 0); #nach 1s Wert lesen
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
sub I2C_SHT3x_readValue($) {
|
||||||
|
my ($hash) = @_;
|
||||||
|
my $name = $hash->{NAME};
|
||||||
|
return "$name: no IO device defined" unless ($hash->{IODev});
|
||||||
|
my $phash = $hash->{IODev};
|
||||||
|
my $pname = $phash->{NAME};
|
||||||
|
|
||||||
|
# Reset Internal Timer to Poll Sub
|
||||||
|
RemoveInternalTimer($hash);
|
||||||
|
my $pollInterval = AttrVal($hash->{NAME}, 'poll_interval', 0);
|
||||||
|
InternalTimer(gettimeofday() + ($pollInterval * 60), 'I2C_SHT3x_Poll', $hash, 0) if ($pollInterval > 0);
|
||||||
|
# Read 6 byte: Temp MSB, Temp LSB, CRC, Hum MSB, Hum LSB, CRC
|
||||||
|
my $i2cread = { i2caddress => $hash->{I2C_Address}, direction => "i2cread" };
|
||||||
|
$i2cread->{nbyte} = 6;
|
||||||
|
CallFn($pname, "I2CWrtFn", $phash, $i2cread);
|
||||||
|
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
sub I2C_SHT3x_CheckCrc(@) {
|
||||||
|
my @data = @_;
|
||||||
|
my $crc = 0xFF;
|
||||||
|
my $poly = 0x131; #P(x)=x^8+x^5+x^4+1 = 100110001
|
||||||
|
for (my $n = 0; $n < (scalar(@data) - 1); ++$n) {
|
||||||
|
$crc ^= $data[$n];
|
||||||
|
for (my $bit = 8; $bit > 0; --$bit) {
|
||||||
|
$crc = ($crc & 0x80 ? $poly : 0 ) ^ ($crc << 1);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
return ($crc == $data[scalar(@data)-1] ? undef : $crc);
|
||||||
|
}
|
||||||
|
|
||||||
|
sub I2C_SHT3x_DbLog_splitFn($) {
|
||||||
|
my ($event) = @_;
|
||||||
|
Log3 undef, 5, "in DbLog_splitFn empfangen: $event";
|
||||||
|
my ($reading, $value, $unit) = "";
|
||||||
|
my @parts = split(/ /,$event);
|
||||||
|
$reading = shift @parts;
|
||||||
|
$reading =~ tr/://d;
|
||||||
|
$value = $parts[0];
|
||||||
|
$unit = "\xB0C" if(lc($reading) =~ m/temp/);
|
||||||
|
$unit = "%" if(lc($reading) =~ m/humi/);
|
||||||
|
return ($reading, $value, $unit);
|
||||||
|
}
|
||||||
|
|
||||||
|
1;
|
||||||
|
|
||||||
|
=pod
|
||||||
|
=begin html
|
||||||
|
|
||||||
|
<a name="I2C_SHT3x"></a>
|
||||||
|
<h3>I2C_SHT3x</h3>
|
||||||
|
(en | <a href="commandref_DE.html#I2C_SHT3x">de</a>)
|
||||||
|
<ul>
|
||||||
|
<a name="I2C_SHT3x"></a>
|
||||||
|
Provides an interface to the SHT30/SHT31 I2C Humidity sensor from <a href="http:\\www.sensirion.com">Sensirion</a>.
|
||||||
|
The I2C messages are sent through an I2C interface module like <a href="#RPII2C">RPII2C</a>, <a href="#FRM">FRM</a>
|
||||||
|
or <a href="#NetzerI2C">NetzerI2C</a> so this device must be defined first.<br>
|
||||||
|
<b>attribute IODev must be set</b><br>
|
||||||
|
<a name="I2C_SHT3xDefine"></a><br>
|
||||||
|
<b>Define</b>
|
||||||
|
<ul>
|
||||||
|
<code>define <name> I2C_SHT3x [<I2C Address>]</code><br>
|
||||||
|
where <code><I2C Address></code> is an 2 digit hexadecimal value:<br>
|
||||||
|
ADDR (pin 2) connected to VSS (supply voltage): 0x44 (default, if <code><I2C Address></code> is not set)<br>
|
||||||
|
ADDR (pin 2) connected to VDD (ground): 0x45<br>
|
||||||
|
For compatible sensors also other values than 0x44 or 0x45 can be set.<br>
|
||||||
|
<br>
|
||||||
|
</ul>
|
||||||
|
<a name="I2C_SHT3xSet"></a>
|
||||||
|
<b>Set</b>
|
||||||
|
<ul>
|
||||||
|
<code>set <name> readValues</code><br>
|
||||||
|
Reads the current temperature and humidity values from sensor.<br><br>
|
||||||
|
</ul>
|
||||||
|
<a name="I2C_SHT3xAttr"></a>
|
||||||
|
<b>Attributes</b>
|
||||||
|
<ul>
|
||||||
|
<li>poll_interval<br>
|
||||||
|
Set the polling interval in minutes to query data from sensor<br>
|
||||||
|
Default: 5, valid values: 1,2,5,10,20,30<br><br>
|
||||||
|
</li>
|
||||||
|
<li>roundHumidityDecimal, roundTemperatureDecimal<br>
|
||||||
|
Number of decimal places for humidity or temperature value<br>
|
||||||
|
Default: 1, valid values: 0 1 2<br><br>
|
||||||
|
</li>
|
||||||
|
<li><a href="#IODev">IODev</a></li>
|
||||||
|
<li><a href="#do_not_notify">do_not_notify</a></li>
|
||||||
|
<li><a href="#showtime">showtime</a></li>
|
||||||
|
</ul><br>
|
||||||
|
</ul>
|
||||||
|
|
||||||
|
=end html
|
||||||
|
|
||||||
|
=begin html_DE
|
||||||
|
|
||||||
|
<a name="I2C_SHT3x"></a>
|
||||||
|
<h3>I2C_SHT3x</h3>
|
||||||
|
(<a href="commandref.html#I2C_SHT3x">en</a> | de)
|
||||||
|
<ul>
|
||||||
|
<a name="I2C_SHT3x"></a>
|
||||||
|
Ermöglicht die Verwendung eines SHT30/SHT31 I2C Feuchtesensors von <a href="http:\\www.sensirion.com">Sensirion</a>.
|
||||||
|
I2C-Botschaften werden über ein I2C Interface Modul wie beispielsweise das <a href="#RPII2C">RPII2C</a>, <a href="#FRM">FRM</a>
|
||||||
|
oder <a href="#NetzerI2C">NetzerI2C</a> gesendet. Daher muss dieses vorher definiert werden.<br>
|
||||||
|
<b>Das Attribut IODev muss definiert sein.</b><br>
|
||||||
|
<a name="I2C_SHT3xDefine"></a><br>
|
||||||
|
<b>Define</b>
|
||||||
|
<ul>
|
||||||
|
<code>define <name> I2C_SHT3x [<I2C Address>]</code><br>
|
||||||
|
<br>
|
||||||
|
Der Wert <code><I2C Address></code> ist ein zweistelliger Hex-Wert:<br>
|
||||||
|
ADDR (Pin 2) verbunden mit VSS (Versorgungsspannung): 0x44 (Standardwert, wenn <code><I2C Address></code> nicht angegeben)<br>
|
||||||
|
ADDR (pin 2) verbunden mit VDD (Masse): 0x45<br>
|
||||||
|
Für kompatible Sensoren können auch andere Werte als 0x44 oder 0x45 angegeben werden.<br>
|
||||||
|
<br>
|
||||||
|
</ul>
|
||||||
|
<a name="I2C_SHT3xSet"></a>
|
||||||
|
<b>Set</b>
|
||||||
|
<ul>
|
||||||
|
<code>set <name> readValues</code><br>
|
||||||
|
Aktuelle Temperatur und Feuchte Werte vom Sensor lesen.<br><br>
|
||||||
|
</ul>
|
||||||
|
<a name="I2C_SHT3xAttr"></a>
|
||||||
|
<b>Attribute</b>
|
||||||
|
<ul>
|
||||||
|
<li>poll_interval<br>
|
||||||
|
Aktualisierungsintervall aller Werte in Minuten.<br>
|
||||||
|
Standard: 5, gültige Werte: 1,2,5,10,20,30<br><br>
|
||||||
|
</li>
|
||||||
|
<li>roundHumidityDecimal, roundTemperatureDecimal<br>
|
||||||
|
Anzahl Dezimalstellen für den Feuchte- oder Temperaturwert<br>
|
||||||
|
Standard: 1, gültige Werte: 0 1 2<br><br>
|
||||||
|
</li>
|
||||||
|
<li><a href="#IODev">IODev</a></li>
|
||||||
|
<li><a href="#do_not_notify">do_not_notify</a></li>
|
||||||
|
<li><a href="#showtime">showtime</a></li>
|
||||||
|
</ul><br>
|
||||||
|
</ul>
|
||||||
|
|
||||||
|
=end html_DE
|
||||||
|
|
||||||
|
=cut
|
||||||
@ -213,6 +213,7 @@ FHEM/52_I2C_PCA9532 klausw http://forum.fhem.de Sonstige
|
|||||||
FHEM/52_I2C_PCA9685 klausw http://forum.fhem.de Sonstige Systeme
|
FHEM/52_I2C_PCA9685 klausw http://forum.fhem.de Sonstige Systeme
|
||||||
FHEM/52_I2C_PCF8574 klausw http://forum.fhem.de Sonstige Systeme
|
FHEM/52_I2C_PCF8574 klausw http://forum.fhem.de Sonstige Systeme
|
||||||
FHEM/52_I2C_SHT21 klausw http://forum.fhem.de Sonstige Systeme
|
FHEM/52_I2C_SHT21 klausw http://forum.fhem.de Sonstige Systeme
|
||||||
|
FHEM/52_I2C_SHT3x macs http://forum.fhem.de Sonstige Systeme
|
||||||
FHEM/52_I2C_TSL2561 jensb http://forum.fhem.de Sonstige Systeme
|
FHEM/52_I2C_TSL2561 jensb http://forum.fhem.de Sonstige Systeme
|
||||||
FHEM/53_GHoma.pm klausw http://forum.fhem.de Sonstige Systeme
|
FHEM/53_GHoma.pm klausw http://forum.fhem.de Sonstige Systeme
|
||||||
FHEM/55_InfoPanel.pm betateilchen http://forum.fhem.de Unterstuetzende Dienste
|
FHEM/55_InfoPanel.pm betateilchen http://forum.fhem.de Unterstuetzende Dienste
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user